Sql Server Agent Icon
Jul 23, 2002
Can anybody tell me what the following icon means against the SQL Server Agent in EM. I'll describe as best as I can:
Its the usual pc tower picture, but instead of the usual green arrow or red square at the bottom, I'm getting what looks like a window (its very small, I can't tell exactly).
When I see this icon, I can't see or change the Service Startup Account under properties and EM doesn't seem to know if the service is stopped or started (I get the option to do either - although both fail if I try them)
Any help would be appreciated
Regards
Andy
View 3 Replies
ADVERTISEMENT
Feb 18, 2015
I have seen the red down arrow for disabled, but I don't know what this means?
(I can't post an image is there a way to upload an image?)
It appears to be a little red tornado or down pin?
View 2 Replies
View Related
Sep 29, 2000
In EM, the left pane shows servers, etc. What is the meaning of the red
squiggly line which can apprear on the server icon?
Thanks.
View 2 Replies
View Related
Nov 30, 2006
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
View 1 Replies
View Related
Feb 19, 2007
We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?
View 4 Replies
View Related
Jul 17, 2006
Is there any way to configure a notification icon in the start tray in Express 2005 (like we had in SQL Server 2000) with a little green (or red) arrow (or dot) to indicate whether the server's up (or down)?
View 3 Replies
View Related
Jun 19, 2006
Earlier versions of SQL had an icon in the system tray - which was very useful. I cannot seem to find how you activate this in 2005.
Also you could schedule a job MSDE 2000 to, say, backup a database. I can't find how you do this in SQL Express.
View 3 Replies
View Related
May 8, 2001
Why would some of my servers that I have registered not show a green arrow (or any connection status for that matter). It's just a blank white circle. Is there some sort of connection error happening between me and the server?
It's sort of annoying to click on these servers and have the error "SQL Server xxxx is not known to be running. Are you sure you wish to connect?" Any way to get around that?
Thanks..
View 1 Replies
View Related
May 14, 2008
Is there any way to change the interactive sorting icon or even adjust it? When I add the functionality to a column, it skews the column heading to make room for it. This means that reports that previously displayed properly no longer look correct. If I adjust the width of the report to allow room for the icon, then the report overflows its boundary in terms of printing.
Also, the icon does not display evenly all the time. Sometimes, it displays directly next to the text and sometimes it is off to the right more.
View 6 Replies
View Related
Mar 15, 2008
Hi everyone,
This is a beginner's question: I know that in order to run a package i need to press ctrl_f5 but i also know that there should be an icon (dimmed green arrow) to do that but i cant find it on the toolbar! I only see the "debug" green arrow. Can anyone help me find the lost "play" (or "run") green arrow ? on which toolbar is it situated ?
Thanks
View 8 Replies
View Related
Jun 12, 2006
In SQL 2005 when a database is in suspect mode there is no obvious way to tell (via SSMS). In SQL 2000 the word "suspect" was displayed (via Enterprise Manager) next to the database, and the respective database icon was grayed out. Why was this behavior changed for SQL 2005? From a disaster recovery standpoint, it is very important to see immediately if a database is in suspect mode.
View 9 Replies
View Related
May 19, 2006
In my installation of RS 2005 when I click the Refresh Icon on a report the report doesnt update. But when I click the "View Report" button it does.
For example, if I change the parameters on the report and click the refresh icon the report seems to flicker as if it was rfreshing but the report data remains the same, even the paramaters in the report remain the same (I have the parameters that are selected in the report header)
Anyone have the same problem or know the solution?
View 19 Replies
View Related
Jun 14, 2006
Hi all,
I apologize if this question has already been asked a dozen times, I ran a search and came up with nothing, soooo...
I installed SQL Server 2005 Express Edition SP1 + SQL Management Studio Express.
I attached all my old databases, and setup named pips, tcp/ip, etc, but for some reason, I don't see a SQL 2005 Express Icon in the system tray to indicate to me if the Server is running or not.
now I undestand Express doesn't come with Agent tools, but where on earth is my tray icon? Do I need to download the 'advanced reporting tools' version instead? (about 200mb+)
TIA,
Ray Bolander
Triac Engineering Ltd
View 4 Replies
View Related
Jan 15, 2007
My co-worker, no idiot, says that the tooltip in the system tray forthe SS2000 icon usually shows the computer and server, but once in awhile shows the password (two slashes and the password).Is this a known bug of some sort? It really shouldn't be showing hispassword. It's likely the developer edition, but still, that isn'tgood.
View 2 Replies
View Related
Apr 8, 2008
I am getting a general protection fault when pressing the print icon in Reporting Services website.
Hi I found this article:
http://database.ittoolbox.com/groups/technical-functional/sql-server-l/reporting-services-2005-print-icon-causes-machine-to-reboot-1592477
but I can't figure ou how to "remove" the RSClientPrint Class add-on in IE 6.
P.S.
Why does something as simple as printing need to be an ActiveX control? There are all kinds of issues revolving around pushing this out using SMS for users without local admin permission.
View 4 Replies
View Related
Oct 15, 2006
So i finally figured out how to create custom transform and add an icon to it. However - when i added the component to toolbox it appears as a file icon (when i didnt have icon it appeared as a blue box) - in the data flow designer it appears as the correct image.
From BOL wrote:"The Data Flow toolbox uses the 16x16, 16-color image type, while
the design surface of the data flow tab uses the 32x32, 16-color image
type. Both are default image types for icons created using Microsoft
Visual Studio 2005."
I assume this has something to do with it - my ico is default 32x32 - however, what would be the way to fix it?
View 6 Replies
View Related
Mar 11, 2008
I am adding some KPI-style graphics to a report (BIDS 2005) and for consistency I would like to use the same icons that are available in the Excel 2007 icon sets that are used for conditional formatting in spreadsheets - there's no point in having users learn another set of icons. Are these graphics available anywhere so they can be added as embedded images in a report? Am I missing some other way to do this?
Thanks,
John W.
View 2 Replies
View Related
Dec 6, 2006
Hi,
Have two servers, one production server and one backup server. Both are Windows 2003 Server having SQL Server 2000 installed.
I have created replication on these servers using a wizard. I then generated SQL scripts to delete and create the replication. These scripts work well, but to test to remove the replication on both servers I used sp_removedbreplication 'DBNAME' on both servers. Not all were removed and on Replication Monitor and sub items plus Log Reader Agent there were added an icon, a red 'X' as in error. The replication seems to work.
Does anyone have any idea on why this happened and what I can do about it. It is not very nice to have errors in replication on a customers servers.
Grateful for answers
Best,
/M
View 1 Replies
View Related
May 22, 2004
Hi All
I installed the following in order:
1. .NET Framework Version 1.1 Redistributable
2. .NET Framework Version 1.1 Software Development Kit (SDK)
3. MSDE 2000 Rel A
In the command window I changed to the directory where MSDE 2000 Rel A was installed and typed in this:
setup.exe INSTANCENAME=MyDb DISABLENETWORKPROTOCOLS=1 SAPWD=<My SA PASSWORD>
MSDE installed successfully and the little icon appeared in the system tray, next to the clock. However, there was no little green arrow/triangle showing on the icon to show connection status as Connected.
4. ASP.NET Commerce Starter Kit
During the Starter Kit install a Connect to Database window opened - Connect to SQL or MSDE.
In the 'Server' field the following was automatically displayed:
STEVE-HOME/MyDb
Where STEVE-HOME is the name of my computer (changed from 'localhost') and MyDb is the instance name.
Thw 'Windows Authentication' radio button was selected by default. I left this unchanged, then clicked OK.
A window opened asking to test the connection. I clicked OK and the connection was successful.
(I didn't select the SQL Server authentication or enter a username, password or select a Database.)
The Starter Kit installed successfully and works fine. However, the SQL Server Service Manager icon states it is not connected when I mouse over it.
I opened the SQL Server Service Manager window and the Server and Services fields are blank.
Surely the Starter Kit wouldn't work if MSDE wasn't connected.
Can anyone advise on how to get the icon to show it is connected
Your help would be greatly appreciated.
View 1 Replies
View Related
Jun 17, 2015
I tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.
View 11 Replies
View Related
Feb 1, 2007
HI, there,
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Thanks
Jack
View 5 Replies
View Related
Nov 30, 2006
Hi All,
I would appreciate any help here at all. I am pulling my hair out!
I am unable to start the snapshot agent or log reader agent from within SQL management studio. it fails on executing step 2 with unknown username or bad password.
I have checked all account details and they are correctly using my domain admin account. I can connect to SQL using teh same account and it also has sysadmin permissions.
If i copy the step 2 paramters and start from the cmd prompt (again logged in using the same domain account) they both start fine.
Any ideas would be gratefully received.
View 1 Replies
View Related
May 18, 2007
I am testing peer to peer replication in our environment. I simulated a three node peer to peer topology and a local distributor.
For some wierd reason I cannot get the Log Reader Agent and snapshot agent to start. The domain account under which SQL Server Agent runs has administrator previlage on the box. I also use a domain account for SQL Server Service. (none of the passwords changed).
This is the error I am getting - "Executed as user: abc. A required privilege is not held by the client. The step failed"
Any ideas???
Also this domain account is a member of
SQLServer2005MSSQLUsers$ServerName$MSSQLSERVER
SQLServer2005MSAgentUser$ServerName$MSSQLSERVER
View 3 Replies
View Related
Feb 7, 2002
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Is any has the same problem ?
View 6 Replies
View Related
Jan 30, 2007
While I was out of the office the Lan Team moved one of my SQL Server2000 servers to a new network domain. Since then the maintenance jobhas not ran.The error log for the SQL Agents has the message listed in the subjectline. I have not found any useful articles on the MS SQL Serversite. Anyone know what might be wrong and how to fix it.HTH -- Mark D Powell --
View 4 Replies
View Related
Aug 17, 2007
Hi.
I have installed an SQL 2005 Failover Cluster on a Two Node Active Passive Windows 2003 Cluster.If i am trying to failover from the Active node to the passive Node,The Sql Server,Sql Server Agent and SQL Analysis resources fail,However if i reset the passowrd in the services tab of the above three services on the pasive node,the resources come online.
Below is the brief of my setup
1.I have two Active directory domain controllers running Windows 2003 R2 Standard edition with SP2.
2.i have installed a Windows 2003 Two Node Active Passive Cluster as NODE1 and NODE2.
3.The Domain account used to install WIndows 2003 A/P Cluster is Clusteradmin.This account is the member of Administartors on the Domain as well as the Local Admin on NODE1 and NODE2.
4.SQL 2005 with SP2 is installed on both the Nodes as SQL 2005 Failover Cluster.The account used to install SQL 2005 is sqadmin.This account is the member of Administartors on the domain and the member of Local Admins on NODE1 and NODE2.
5.SLQ 2005 has four domain groups for 4 SQL Services.The Services are SQL Server,SQL Server Agent,SLQ Anaylisis Server and Full text Search.
6.Each of these servcie has a seperate service account created for them.All these service accounts areb the members of domain admin and the member of Local Admin on NODE1 and NODE2.
7.Each of these servcies is running under these servcie accounts in the Servcies tab in NODE1 and NODE2.
8.If i fail the resources from NODE1 to NODE2 ,The SQL Server,SQL Server Agent and SQL Anaylisis resources are failing.on going to the service tab of NODE 2 I reset the password for these services,the services come online.
10.The Cluster resources and MSDTC Resources are Failing over successfully.They are coming online successfully.
11,I have a problem with the SQL Server Resources,even if i failback to NODE1 from NODE2,the same resources are failing again.
Plz Advice.
Regards
Khalid
View 1 Replies
View Related
Jul 31, 2007
Hi all.
Is there a difference with sql replication between sql server 2005 64bit and sql server 2005 32bit?
Both are on a Windows 2003 server. One is 32 bit and the other one is 64 bit.
The first time I set up sql replication (test environment), it was on a 32 bit sql server. This worked fine.
The second time I wanted to set up replication (live environment), it was on a 64 bit sql server. This didn't worked fine.
I can't call the sqlcesa30.dll file on the 64bit server with IIS. So I called the dll via a remote IIS server.
This worked but gave me the following error when calling the following URL:
http://domain/PDASYNC/sqlcesa30.dll?diag
SQL Server Mobile Server Agent Diagnostics
2007/07/31 14:26:55
General Information
Item
Value
Server Name
domain
URL
/PDASYNC/sqlcesa30.dll
Authentication Type
Anonymous
Server Port
80
HTTPS
off
Server Software
Microsoft-IIS/6.0
Replication
Allowed
RDA
Allowed
Logging Level
0
Impersonation and Access Tests
Action
Status
ErrorCode
Impersonate User
SUCCESS
0x0
ReadWriteDeleteMessageFile
FAILURE
80070003
SQL Server Mobile Modules Test
Module
Status
ErrorCode
Version
SQLCERP30.DLL
SUCCESS
0x0
3.0.5207.0
SQLCESA30.DLL
SUCCESS
0x0
Unknown
Reconciler Test
Reconciler
Status
ErrorCode
9.0 Database Reconciler
SUCCESS
0x0
8.0 Database Reconciler
FAILURE
0x8007007E
SQL Server Module Versions
Module
Version
sqloledb.dll
2000.86.1830.0
9.0 replrec.dll
2005.90.2047.0
9.0 replprov.dll
2005.90.2047.0
9.0 msgprox.dll
2005.90.2047.0
8.0 replrec.dll
2000.80.760.0
8.0 replprov.dll
2000.80.760.0
8.0 msgprox.dll
2000.80.760.0
After seeing this I looked up what ReadWriteDeleteMessageFile could mean. It appeared to be some NTFS acces problem. But when I checked the security settings, it all seemed to be ok.
Has anyone any idea what else to check? Or is sure that I must have done something wrong?
Thanks in advance,
Arjan
View 3 Replies
View Related
Dec 20, 2007
Sql server agent is running under a domain account that is a member of administrators and domain users amongst others, and the package is executed as the service account. Connecting to servers on the same domain works and when I run it from the msdb package store in ssis (ssis runs under the network service account ...) it will connect to the pop server as well. Permissions, fiddly proxies .. the answer's out there somewhere
View 3 Replies
View Related
Oct 15, 2015
The SQL Server Agent (MSSQLSERVER) service on server started and then stopped. If i Manually start the services also SQL Server Agent services are stopping automatically.Though I selected Auto Restart SQL Server Agent if it stops unexpectedly, The services are stopping automatically.TCP/IP protocol was enabled for port 1433.Are there any setup I missed?
View 5 Replies
View Related
Dec 18, 2006
Hello everyone !!!
I need to do a process that run every day to update some data, but my sql server version (express 2005) does not have job agent service. Does anyone can give me a suggestion of what to do?
Thank you!
View 2 Replies
View Related
Mar 14, 2006
Hi there,
was wondering if any can tell me why the following jobs keeps failing:
INSERT INTO TblActivityBookingArchive SELECT * FROM TblActivityBooking WHERE (expiryDate <= GETDATE())
it retuens that it is successful when there is no data to archive from TblActivityBooking, it's when there is data to archive that it returns that the job has failed.
Hope you can help
Thanks
Mel
View 4 Replies
View Related
Jul 29, 2002
I am unable to start SQL Server Agent. When I try, I get this message: "An Error 1053 - (The service did not respond to the stort or control request in a timely fashion) occurred while performing this service operation on the SqlServerAgent service."
View 1 Replies
View Related
Aug 7, 2002
Is it possible to schedule a job to automatically send e-mails based on criteria in a database table, maybe using CDONTS? I don't want to use SQLMail, since my administrator has not set that up. Also, I don't want to write the code in an ASP page for the following reason: If the page is not being viewed at the time I want the e-mail to be sent, it won't work. Besides, it's not efficient to have to read this code for no reason every time a page is loaded in the hopes someone loads it at the correct time. Any suggestions?
View 1 Replies
View Related
