Sql Server Case Sensitive?????????
Aug 31, 2006hi friends, is it possible to make sqlserver case sensitive?
i mean is there any options to set while installation?
thank you very much
hi friends, is it possible to make sqlserver case sensitive?
i mean is there any options to set while installation?
thank you very much
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedCan someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedYesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View Relatedin sql server 2000 or 2003 how can i tell if a database is case sensitive or not??
View 2 Replies View RelatedDear SQL Experts,
Can I change an existing 2000 sql server to case-sensative?
Books on-line tell you how to create one during setup, but requirements around here dictate that I chage my existing setup.
Any help would be greatly appreciated.
Thanks
I have a Users table with UserName and Password columns, in SQL Server 2005.
Currently the SQL Server is not set up to use case-sensitive criteria in the sprocs. How can I write my sproc to be case sensitive when searching on username and password?
I have already install my Microsoft SQL server 2000 as not casesensitive, how to I change it to be case sensitive?
View 2 Replies View RelatedHii
I transferred data from Oracle to sql server 2005. Now what i want is to make data in the tables case-sensitive .(it has to be data inside the tables only and not table and column names).
what i tried is :
alter database test collate Latin1_General_CS_AS
But to my horror it made the tables name case-sensitive .
Plz help me out asap.
Thanx in advance
Supriya
Is Windows Login Name Case Sensitive in SQL Server 2000?
View 1 Replies View RelatedI have just been given a new SQL Server 2000 box to look after in production. I just tried to run a standard t-sql script I use for setting up backup jobs and so on. However, it failed with a long list of errors - quite a surprise at first since I have run the same script on many other servers wihtout a hitch. On close examination, the problem appears to be that the new serer is setup with a server default collation... Latin1_General_BIN (I think a binary based collation makes this a case sensitive server).
This is quite an urgenet one since I have to get this wrapped up today. I don't think I can change the server's default collation without a lot of red-tape. Is there a quick way to run my scripts in a 'case insenstive' context within Query Analyzer? If so, how?
Thanks in advance,
Clive
I have a set of data where a column contains titles which have been formatted as follows:
"FirstWordSecondWordThirdWord...." etc.
That is, all the words have been concatenated but can be visually separated by their capital first letters.
For reporting purposes, I need to break this column into the separate words so that it looks like:
"First Word Second Word Third Word...." etc.
how this can be achieved?
I have a table called SrcReg which is having a column name called IsSortSeqNo smallint. I am mapping this column in SSIS and the problem comes when I try to execute against different database which has this table but the column name as ISSortSeqNo. I mean both databases having same name but one with upper case. So SSIS fails executing due to meta validation issue.Is there any way to check whether the column name is in small case or upper case through query?
View 8 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
Hi,
SELECT UserID, UserName, Password, PublisherID, CurrencyFROM [User]WHERE (Password = 'Anitha') I am using the above mentioned it is working but int the password field i had given it as anitha. Now the querry is retriving the record for anitha, it shouldnot happen. The querry should retrive the record of anitha only for where condition anitha and not for Anitha or ANITHA etc..
Thanks
Vishwanath
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedOver the weekend I decided to give it the ability to do a case sensitive character swap. Updating the code was pretty straight forward but when I was through, I noticed that I was getting Cardinality Estimate warnings that I wasn't getting before.
Anyway, here is some test data and two versions of the executed SQL (the base code is all dynamic and the two code versions are the result of toggling the @MatchCase parameter).
/* ========================================
CREATE TABLE
======================================== */
CREATE TABLE [dbo].[PersonInfoSmall](
[PersonID] [BIGINT] NOT NULL,
[FirstName] [NVARCHAR](50) NOT NULL,
[MiddleName] [NVARCHAR](50) NULL,
[LastName] [NVARCHAR](50) NOT NULL,
[code]....
Dear everyone,
I am doing Login webform (C# .NET web application) with SQL Server 2000.
The staff table is to store authenticated user info.
But when I test it, I found that the password can be case insensitive, i.e. 'A0001' should be correct password, but 'a0001' can allow login.
Could anyone tell me how to solve this problem??
Thanks you very much!!
private void btnLogin_Click(object sender, System.EventArgs e)
{
//instantiate SQL connection
SqlConnection sqlConnect = new SqlConnection(connectStg);
SqlCommand selectLogin = sqlConnect.CreateCommand();
selectLogin.CommandText = "SELECT sid, type from STAFF Where sid= '" + txtId.Text + "' and pwd= '" + txtPwd.Text + "' ";
//open connectin for execution
sqlConnect.Open();
//instantiate the SqlDataReader reader
SqlDataReader loginReader = selectLogin.ExecuteReader();
//try and catch SqlException error
try
{
if(loginReader.Read())
{
// check whether the user is the role of administrator or operator
// I use GetValue(1) i.e. type field from the above select statement // if "O' then go operator page, else go to administrator page.
if (loginReader.GetValue(1).ToString().ToUpper().Equals("O"))
{
Server.Transfer("//SMS/LoginUser/SuccessLoginOper.aspx");
}
else if (loginReader.GetValue(1).ToString().ToUpper().Equals("A"))
{
Server.Transfer("//SMS/LoginUser/SuccessLoginAdmin.aspx");
}
}
else
{
//clear content of textbox and display error message
txtId.Text="";
txtPwd.Text="";
lblLoginFail.Visible = true;
lblLoginFail.Text="Login Failed!<br>" + "Ensure that ID and Password are correct!";
}
}
catch (SqlException se)
{
if (se.Number == 17)
{
lblLoginFail.Visible = true;
lblLoginFail.Text = "Could not connect to the database";
}
else
{
lblLoginFail.Visible = true;
lblLoginFail.Text = se.Message;
}
}
//close SqlDataReader and SqlConnection
loginReader.Close();
sqlConnect.Close();
Hi
how can i use the sensive case in a select field from table where fild='GhhY' ?
are SQL Server 7 table names, column names case sensitive?
View 2 Replies View RelatedIn SQL Server 7.0, how do you SELECT a column which has values beginning with only lower case letters
can anyone advise?
Hi,
I want to change my database character set and I use database SQL Server 6.5.
At the first time I install database, I use charset type to case sensitive.
Now, I want to change this charset from case sensitive to un case sensitive.
I hope somebody want to trasnfer knowledge about it.
Thanks for attention.
Regards,
Susan
Hi,
I am using SQL Server 2000.
How to make case sensitive of a database.
Eg :
Should work
Select * from Employees
Select * from Employees where Title like 'S%'
Should not work
select * from employees
select * from employees where title like 's%'
Thanks in advance.
I just created my first Asp.net app. I had to install it to a corporate server. What I found is that the corporate SQL Server 2000 was case sensitive in the stored procedures while my installation was not!
How can I set my SQL Server 2000 to be case sensitive as well?
Hi all,
There is a requirement to perform a case-sensitive search
on a column in table. The installation of SQL Server is
case-insensitive...
Eg.: select * from t1 where c1 = 'abcd'
should return only rows where c1 = 'abcd' and not 'ABCD'
or 'Abcd' or any other.
I understand that this can be done using the CONTAINS
predicate using Full-text indexing.
select * from t1 where CONTAINS(c1,'abcd')
Is this the right solution to the problem? Has someone
had experience implementing this?
Thanks in advance.
-Praveena
Our database is configured as case insensitive. I need to run a query which is case sensitive. Is there a query option or function I can use to compare, taking upper/lower case into consideration?
Regards,
Gavin Patterson
Is it possible in SQL Server 7.0 sp1 to have a
password that is case-sensitive on a case-insensitive
installation of SQL server?
Toni
How do you set the case sensitive option in SQL 2000? If l already have data in the database whats the best way of doing this.l want the selects on the database to be case sensitive?
View 3 Replies View RelatedAfter all the pain I've been going through with code pages and collation, I was asked how, when sql server does it's joins and predicate searches, how does it actual (internals now) know the an "A" = "a" in an insensitive search?
I didn't have the answer.
Damn, Now I really have to pick up Kelans book.
I'm a bit flummoxed on this one (doesn't take much these days). We have a test SQL database and a prod SQL database configured with the same user name and a complex password.
The password consists of letters and numbers, mixed upper and lower.
What I am seeing, however, is that SQL will permit access even if the user gets the case wrong on the letters. One letter, two letters, all letters. It doesn't matter.
I thought SQL passwords were case sensitive; was I wrong?
Regards,
hmscott
Edit: I should add that I am running SQL 2000, SP3a (hotfix 0818) on Windows 2000 SP4 and that SQL is clustered on two servers in Active/Passive mode (this applies to both Test and Prod).
Hi,I have yet to find an answer for this:I want to do a case-sensitive query using "like" on a table in sql 7.Currently, "like" performs case-insensitive query.I understand that you can use the following query in sql 2000:SELECT *FROM table_xWHERE col1 collate SQL_Latin1_General_CP1_CS_AS LIKE '% AVE %'However, is there a similar method for sql 7?Any answer would be appreciated.Thanks,Jay
View 1 Replies View RelatedUsing ADO 2.7, what is the best way to perform a case-sensitive filter? I have seen on other forums where folks have said that the StrComp function can be used inside of the .Filter method, but I haven't been able to get that to work. I am using VB 6 and ADO 2.7, and have a need to perform case sensitive filters. I know I am not the ony one who has needed to do this...
As always, your time is appreciated.