I have an sql server DB which I populate on a local machine, using enterprise manager I backup the DB and zip it up and upload it to my server where I restore it. Every time I restore it I have to add a new login, which is rather annoying, and it wont let me delete the old login - so I have a list of redundent logins.
View 1 RepliesI restored a DB to another server and then i used the stored procedures
exec sp_addlogin on the master DB and the exec sp_change_users_login on the DB that I have restored. When i try to run a sproc I am getting
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'.
I have used windows authentication to login to connect to the server using sql management studio
Am i missing something. Thankyou for the help
Hi all,
I have restored a database from one SQL server 2000 installation to the target (test) server of exactly the same type.
After the restore, I have found that the sa User in my database is missing. If I go to logins under 'Security' in Enterprise Manager, the sa login is there and after viewing properties for this Login, it is checked as having acces to my offending database under the Database Access Tab.
I try to uncheck it but it tells me that the name dbo was not found in the users collection. I go back to the database and try and add the user (login = sa, Name = dbo) and returns with the error
Error 15405: Cannot use the reserved user or role name 'sa'.
Can anyone explain this and how I can reinstate the sa id (The is did not have a password on either servers.
Thanks
David Ray
hi,
My requirement is as follows:
1. I Dump my Database into a dump device
2. I Rebuild my mater Database
3. I Restore my User Database.
4. At the end of the above exercise I find my relationship between sysusers (User Database) and syslogins (master) is totally screwed up. This has been causing logon problems to my User Database…
5. I tried using sp_change_users_login …but it does not seem to work.
Thanking you in advance for your help rendered
I restored a DB from one SQL server to the other. Before doing the Restore I created a blank DB on the destination server. The destination server already had all the logins that were present on the source server. I also created the same users in the destination DB as the source. Before doing the Restore if I look at the users in the Enterprise manager I can see all the users that I created. However after the Restore the only user I see in the Enterprise manager is 'dbo'! If I login using isql and go the newly restored DB and issue 'sp_helpuser', it shows me all the users that I created.
So why don't I see these users from Enterprise manager?? It looks like an ID mismatch problem between syslogins and sysusers.
Next I login using ISQL to the destination server using one of the corrupted? logins. I try to go to the restored DB and it complains that this is not a valid user. So I come out and login in again as SA and go the restored database and try to add the earlier user. It says user already exists. :mad: I'm not sure whats the right way out here. :confused: Any help appreciated.
Thanks
I hope this is a nice fat ball that someone can knock out of the park...
We've recently started to upgrade our development servers from Win2k to Windows Server 2003. Naturally, the SQL Server boxes receive MS SQL Server 2000 SP3a. Our database users now cannot restore to their own databases.
We usually grant each login the 'dbcreator' server role (and hope the developers are too busy to realize everything else it allows). Each user's login is dbo in his/her database. Typically one developer will produce a reference dump file, and all the other developers load it as they need it.
If a user executes a restore, it trundles along happily until almost the end, spitting out an error. Here's a sample:
100 percent restored.
Processed 376 pages for database 'bobdb', file 'Data' on file 1.
Server: Msg 916, Level 14, State 1, Line 68
Server user 'bob' is not a valid user in database 'bobdb'.
Server: Msg 3013, Level 16, State 1, Line 68
RESTORE DATABASE is terminating abnormally.
Oh, and this worked with SQL Server 2000 (any patch) on Windows 2000 Server.
Developers reload their databases so often (and DBA resources are so spare) that routing all restores through a DBA will bring development to its knees. So, each developer must be able to restore dumps to their own database.
Help? Which server roles/permissions/GRANTs do we need to provide our developers with the power they need? (and not the powers they don't need!)
I made a backup of a production database and copied that backup over to a development server and restored the database. Now I have users saying that the application is failing on development. I have users that have NT authentication and some with SQL authentication.
What is the best way to get everything to sync up again?????
Hey Everyone,
I am testing restoring databases on another SQL 2005 server in out environment using HP data protector 5.5 and its great. However, I notice that the security login accounts do not get restored. If this is the case how do I go about getting accounts restored? Also, are there any other options?
Cheers,
Mark
Hi guys! When it comes to writing sql statements, I do ok. But I just know the basics on sql server dba stuff.I need to create a sql server login account that has the ability to backup and restore databases, BUT NOTHING ELSE.No ability to change anything other than via the restore process. I figured out how to do the backup portion of my requirement, but not the restore part.Any ideas? Thanks in advance!
View 3 Replies View RelatedHallo
I have a bit of a problem I haven't come across before. I was testing some restore code using smo, when the restore process got corrupted. Now I cannot log into that database file. Whenever I try and connect to it, I get a login error. Connections to this database file previoulsy worked very well.
I do not get login errors for databases with different names, or when using the same database file on another computer. There must be some data stored somewhere that is causing this. I have removed the database file and reloaded it, but to no avail. Any insight into this would be appreciated
Dear group,I am a DB-Administrator for a Company that creates and maintains asoftware solution based on SQL-Server and Crystal-Reports.The Crystal-Reports part uses the following method to present data.First a specific user (database authentification) is created with afixed password. Then Crystal Reports uses thisuser/password-information to login to the database and present or printthe data.I recently received a database from a customer of ours and i restoredit on my machine. It worked perfectly except that the Crystal Reportspart did not function at all (showing only blank reports).After dropping the specific user and creating the fixed password thething worked.So my question: does restoring a SQL-Server database on a differentmachine alter or eliminate login and user information ?Any reply will be highly appreciated.Greetings from ViennaUli
View 2 Replies View RelatedHi!
I have a SQL 2000 database that has several tables with the same name but with different users/logins.
Example:
Database "Customers"
Table Customer with user / login CompanyA
Table Customer with user / login CompanyB
Table Contact with user / login CompanyA
Table Contact with user / login CompanyB
I need to split these into two different database's
Database "CustomersA"
Table Customer with user / login CompanyA
Table Contact with user / login CompanyA
Database "CustomersB"
Table Customer with user / login CompanyB
Table Contact with user / login CompanyB
Any good idea how to do this?
Ingar
Hi all,
Have just tried my sql server 2005 connected asp classic website on II7 for the first time and have gotten some errors.
First off I have unchecked show friendly errors in IE and have enabled ASP to send error messages to the browser.
My error I get is when I execute a basic .asp page:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "mydatabasename" requested by the login. The login failed.
/index.asp, line 10 which is dbConnect.Open cstring
from this peice of code:
sub dbOpen()
set dbConnect = Server.CreateObject("ADODB.Connection")
cstring = "DSN=mysqldsn; Trusted Connection=yes"
dbConnect.Open cstring
end sub
I have gone into ODBC and have setup both a user dsn and file dsn that equals mysqldsn and points to my database (I know you only need to set up one DSN but I'm not sure which)
I also notice under mywebsite home panel there is a connection string option. Do I do anything with that?
Definatley a lot more to it than XP's II6!
Any help or advice would be greatly appreciated.
Oracle and Teradata are able to capture the windows/client login that connects to their database with a functionnal ID.I've searched around and I don't think MS SQL can do this...I administer SQL 2014 server and also SAS Enterprise guide product. I've created sql server logins for several teams so everyone shares the same sql server login which is used to bind the SAS library to my SQL server database.
However, when looking at activity monitor, I can't drill down to which user is executing a particular query. I only see the SQL login which is share amongs 200 other folks.On the other hand, when they connect from SAS to Oracle or Teradata, I can see the shared login + additionally their windows NT login used to connect to SAS which is awesome....they can't fool me by using a shared/funcionnal ID....i still see who's using that ID...
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
Hi,
I have a script component. What it does, it queries the a table using a connectionstring assigned to it in the Connection Managers Editor (which is an ado.net adapter). this works fine when i'm using a windows login in the ado.net connection manager. But when i changed my connection to use SQL server login, I encounter this error:
OnError,,,Add new records to Dim_T_Status (Case),,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OnError,,,LOAD AND UPDATE OCEAN Dimension Tables,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
OnError,,,LoadOCEANDimensions,,,10/14/2007 5:54:47 PM,10/14/2007 5:54:47 PM,-1073450910,0x,System.Data.SqlClient.SqlException: Login failed for user 'CS_REPORT'.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper90 wrapper, Int32 inputID, IDTSBuffer90 pDTSBuffer, IntPtr bufferWirePacket)
How to go about this?
cherriesh
All the logins with sysadmin role are locked out in one of the SQL server. Also in that instance Logon trigger is implemented which allows only certain users with Windows Authentication to logon.
This server is converted into single user mode by using command prompt. Now we are attempting to connect to SQLServer using command sqlcmd -S FTCPU3239 (since we do not have any other login) and create a new login with sysadmin role but are refused due to logon trigger. it says Login failed for login 'DomainNameUserName' due to trigger execution.
I have a server that has 20 databases . I have tested with few users with different level of access and all of them were able to connect to the server and also see, select, update , delete from a particular database which is kind of weird because they do not have a user login associated or mapped to that database. I checked and no user is part of any group in AD that would give them permission to connect . I need a query that would find the permission path of a user. I already queried with xp_logininfo but I am not getting any thing.
View 9 Replies View Relatedcreate login dave with password='abc', default_database=tempdb
View 6 Replies View Related
Hi,
I am using SQL Server 2005 at home.
My problem is I forgot my password to log in to my server.
I only remember user name is 'sa'.
I haven't used it for two to three months. So I forgot password.
Previously, When I used sql server 2000, my login is as windows login. so no problem.
But this time, I set seperate log in and I got this problem.
Any help will be appreciated.
Thanks
George
Hello everyone,
Since last so many days i am seeing that someone is trying to login to sql server through login name sa.but that login is failed.and this is occuring constantly.
Earlier i had same login failed message for another ip address.i have blocked that ip address through access-list in firewall.but now i am seeing the same message for another ip address.
(1).how can i permenently remove this message from Event log.
(2).What is the impact of this on sql server performance.is sql server performance degraded by this kind of contineous attack?
here i am attaching that report from event viewer log file.
2/26/2007 1:48:18 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:17 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:17 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:17 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:16 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:16 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:16 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:15 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:15 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:15 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:14 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:14 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:14 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:13 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:13 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:12 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:12 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:12 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:11 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:11 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:11 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:10 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:10 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:10 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:09 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:09 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:09 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:08 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:08 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:08 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:07 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:07 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:07 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:06 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:06 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:06 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:05 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:05 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:05 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:04 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:04 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:04 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:03 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:02 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:02 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:02 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:01 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:01 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:01 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:00 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:00 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:48:00 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:59 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:59 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:59 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:58 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:58 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:57 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:57 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:57 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:56 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:56 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:55 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:55 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:54 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:54 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:54 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:53 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:53 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:53 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:52 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:52 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:52 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:51 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:51 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:50 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:50 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:50 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:49 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:49 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:49 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:48 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:47 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:47 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:47 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:46 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:46 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:45 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:45 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:45 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:44 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:44 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:44 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:43 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:43 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
2/26/2007 1:47:43 AM MSSQL$CASHMAX Failure Audit (4) 18456 N/A CASHMAX Login failed for user 'sa'. [CLIENT: 192.192.81.126]
Needs your help to resolve this issue.
Thanks,
Bharat
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies View RelatedI am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
I am getting the error:
Cannot open database "aspnetdb" requested by the login. The login failed.
When I browse to my ASP.NET 3.5 LINQ web application on the IIS 6.0 server on Server 2003.
I imagine this is because while I granted SQL Server 2005 login and permissions to my database that the application stores its data in, I did NOT grant any rights to the service account the IIS Application Pool uses for its identity to the aspnetdb database on SQL Server which is where all my roles information is stored at.
My question is what are the MINIMUM permissions needed for this database so it can perform its roles related functions?
I'm using Windows Authentications with the SQL Role provider for authorization.
Thank you.
EDIT: I think I only need to open the aspnetdb database and add my login to the aspnet_Roles_FullAccess role. Is that correct?
hi all,
i have created a login account using certificate.
-----CREATE A CERTIFICATE--------
CREATE CERTIFICATE TEST_CERTIFICATE123
WITH SUBJECT = 'CERTIFICATE IN TEST DATABASE',
START_DATE='06/04/2007',
EXPIRY_DATE = '02/02/2009';
GO
--CREATE LOGIN FRON THE CERTIFICATE---
CREATE LOGIN LALIT12301 FROM CERTIFICATE TEST_CERTIFICATE123;
GO
How can i use this login credential to login to microsoft sql server management studio.It is askin only for sql/windows authentication.There is no option for the certificate based login.
if i m passing this login id as sql server authentication then i m getting following error.
Login failed for user 'LALIT123'. (Microsoft SQL Server, Error: 18456)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
please do help me.....
Dear members,
In MSDN, it says that it is recommended to use windows authentication to connect to SQL Server rather than use mixed authentication.
I create user deltasqluser on windows OS, and I specify in my webform ASP.NET script below :
protected System.Web.UI.WebControls.Label Label1;
private string _connString = @"data source=deltasql2000;initial catalog=northwind;integrated security=false;user id=deltasqluser";
/*
comment : I login to my windows as deltakoronx, and I want to every user (including me), connected to sql server through IIS, will be identified as deltasqluser not as user's login (impersonate)
*/
private void Page_Load(object sender, System.EventArgs e)
{
SqlConnection conn = new SqlConnection(_connString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
cmd.CommandType = CommandType.Text;
cmd.CommandText = "select suser_sname()";
conn.Open();
string userName = cmd.ExecuteScalar() as string;
conn.Close();
conn.Close();
Label1.Text = userName;
}
at web.config, I add :
<identity impersonate="false" userName="deltasqluser" password="" />
at IIS webApplication1's properties, tab "Directory Security", at "Authentication and access control" section, I checked "enable anonymous access" with user : DELTAIUSR_DELTA and checked "Integrated Windows Authentication",
at query analyzer, I login as "sa" and execute script below :
exec sp_grantdbaccess 'deltasqluser','northwind'
when I run the ASP.NET script, error at conn.Open(); with error message :
Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
What should I do so that IIS login to SQL Server as user deltasqluser not as "NT AUTHORITYNETWORK SERVICE" ?
Regards,
Koronx
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies View RelatedI am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
Hi All
I am getting below error while
Error string: Cannot open database requested in login 'XXXXXXXXXXX'. Login fails.
what is possible casue for above problem.