Using shared folder in windows mobile 5 emulator, it is not possible to create a database (sqlserver mobile 2005) in the emulated storage card.
The error "sql mobile made an unsupported request to the host operating system. Minor Err 25133 is raised. Reading or writing file from/to the emulated storage card occurs without error.
Is this a bug of SqlCeEngine?
thank you
vincenzo
Hi,
SQL mobile apps like - .Net Frame work, SQLCE mobile etc - can they be install on the Storage Card? I am running out of space on my Verizon 6700 and don't have enought memory to install on the device. I cleaned up as much as I could still not enough space on the device.
Can this be done?
Thanks,
P
I have built an application for storing my flight times on my phone after each leg of a trip... I am using C# and Sql CE as the storage system for later export to a larger desktop version (in the works). My question is related to storing the sdf file on the storage card. Can it be done and what would the connection string look like since I have tried and got a error stating it can't find the sdf file in question. I have it setup right where if I were to do a fresh install it would ask for the install directory main memory or storage card. If I select storage card it installs just fine but when I run the app it does fail with the aforementioned error..
Storage Card is 2 gigs..
Thanks
Morgan Vermef
Hi all experts,
in case of a cold boot on a device, I insert the the flash SD disk in a device and install the NETCF 2.0
by clicking on the NETCFv2.wm.armv4i.cab which iI previously copied, that's fine it works OK,
but is there a cab file for Sql server CE that i can install from the flash disk as well,
I'm trying the Sqlce30setupen.msi, SQLServerCE31-EN.msi, an I get a device message "There is no application associated....."
TIA
Jack
Hey,
My team is currently building a system for the Windows CE 5.0 platform that uses a SQL CE database to synchronize with a SQL Server 2005 database. During this synchronization process, the application needs to pull down a good bit of data and it reaches its cap for memory. A possible solution for this is to use an SD card for storing the database. However, when the Synchronization process is run, the following SQL Exception Occurs:
HResult = -2147467259
Message = "SQL Mobile encountered problems when creating the database."
NativeError = 28558
Source = "Microsoft SQL Server 2005 Mobile Edition"
StackTrace = at System.Data.SqlServerCe.NativeMethods.CheckHRESULT()
at System.Data.SqlServerCe.SqlCeReplication.AddSubscription()
Our Trace
at System.Windows.Forms.Control.OnClick()
at System.Windows.Forms.Control.WnProc()
at System.Windows.Forms.Control._InternalWnProc()
at Microsoft.AGL.Forms.EVL.EnterMainLoop()
at System.Windows.Forms.Application.Run()
Main
The connection string we're using for the Mobile Database is "data source=Storage CardDatabase.sdf"
Has anyone ever had any problems when trying to perform Merge/Replication on expandable Flash Memory and if so, how did you solve them?
Thanks,
Matt
Hi all.
I develop a app on PPC 4.20 using SQLServer 3.1. I developed a o/r mapper whitch auto-creates the Database and Tables using attribute-decorated objects. That all works fine - as long as my Database is in \MyDocuments .
Trying to store the Database in \Storage Card\test.sdf, whitch is absolut neccessary because it will become to big for storing onto device, I get error 25113, "A not supportes operation to host was called" (Translated from German)
When I trie to copy a Database to the SD-Card, inserts are not commited.
Is it not supported to store Databasefiles on a Flashcard?
My development-environment is .net 2.0 sp2, device-emulator v2, Windows XP, vs2005. In the emulator, i have linked a windows-based directory as storagecard.
What am I doing wrong??
class SQLManager
{
private static SQLManager instance = null;
private SqlCeEngine m_cEngine = null;
private SqlCeConnection m_cConn = null;
private SQLManager()
{
m_cEngine = new SqlCeEngine(
"Data Source = \Storage Card\test.sdf");
bool bCreated = false;
if (!File.Exists("\Storage Card\test.sdf"))
{
bCreated = true;
m_cEngine.CreateDatabase();
}
m_cConn = new SqlCeConnection(
"Data Source = \Storage Card\test.sdf");
m_cConn.Open();
if (bCreated)
DoInitialDatabaseSetup();
}
....
}
Dear ppl,
I am writing an application for a device (MDA Pro T-Mobile) having Windows Mobile 5.0 using
-MS .NET Compact Framework 2.0 SP-1
-SQL Mobile 2005.
-VS 2005 .NET
The application uses Merge Replication. The error occurs in the Synchronise() Method of the SqlCeReplication object.
"SQL Server Mobile encountered problems when opening the database."
repl.AddSubscription(AddOption.CreateDatabase);
repl.Synchronize();
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
-sqlce30.wce5.armv4i.cab
-sqlce30.repl.wce5.armv4i.cab
-sqlce30.dev.ENU.wce5.armv4i.cab
However, when i run this application on a device(Dell X50 AXIM) with Pocket PC 2003, it runs fine creating the database and sysnchronising it.
The target platform for the project is Windows Mobile 5.0 Pocket PC SDK.
Does any one have any clue what could be the problem ?
Regards
Nabeel
Hello,
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK.
So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ?
Do you know how I can resolve the problem ?
By advance, thank you for any answer.
--
Gregoire
I'm using a Hemisphere West MSR-152 card reader. I need to take data from the reader and store it into SQL Server 2005 Express. Can anyone give ideas on how to do this (sample code recommendations). I'm using visual studio 2005 express and I code with VB.NET.
View 3 Replies View Related
Hi:
When I try and connecto to SQL CE I always get an invalid operation exception. I"m afraid that I did not follow the proper install for Orcas Beta 2. I can't remember if I was supposed to uninstall SQL Mobile 2005 first or not.
All I know is when I try and use my SQL CE I can't connecto to a DB / sdf file ?
Any help would be appreciated I"m just starting to use SQL CE.
thanks
mark
I am a Windows developer for the IBM Tivoli Storage Manager Server (TSMS) product.
Our product installation is built with InstallShield and uses the Windows Installer.
On a new installation of Windows 2003 x64 Storage Server R2, at a customer's site, the TSMS product fails to install.
The install of the OS has version 3.01.400.3959 of the Windows Installer and I see no newer version that installs.
Part of our product is 32 bit (console) and another part is x64 (server).
When installing I can see that the install's default is being redirected/reset to C:Program Files (x86)TivoliTSM after it is explicitly set by a custom action to ..Program Files.. . I further observe that our custom actions to write 64 bit registry entries are being refused.
REGSAM samMask = KEY_ALL_ACCESS;
if ( regIsWow64Process () ) samMask = samMask | KEY_WOW64_64KEY;
lStatus = RegCreateKeyEx( hLocalConnectKeyRoot,
szSubkey,
0L,
NULL,
REG_OPTION_NON_VOLATILE,
samMask,
NULL,
hKey,
&dw ) ;
The above fails to create the key.
We have tried four versions of our TSMS spanning many changes but the install acts the same.
This does not happen on any other Windows OS we test on but we do not test on Windows 2003 Storage Server R2 being that it is an OEM product. We did test on Windows server 2003 R2 x64 and do not see this problem.
Do you have any suggestions on how to tackle this problem?
I have full installation traces but can only see that the registry work is being refused. I can't see why.
Here are my planning details:
RAID 1:
2 disks RAID 1 for OS and BINS
2 disks RAID 1 for Backups.
RAID 10
4 disks RAID 10 for data
4 disks RAID 10 for log
4 disks RAID 10 for TEMPDB
Should i put the master and other system database on RAID 10 along with TempDB.
Or what else a guru fellow will advise in above setup.
thanks,
Dear All
I have a situation where I installed SQL Server 2005 64 bit on a server, where database files are stored on storage media 'Sun StorEdge 3320 Storage'
I am facing deadlock problems, and slow performance, though they do not appear on my test environement (64-bit, server with no storage)
I need a method to track and find out the source of the problem, could be storage media compatibility, SQL Server or any other issue
Please find below specifications of the storage media used;
Sun StorEdge 3320 Storage
3.1.3.1 SE 3320: Technical Specifications
Model Sun StoreEdge 3320.
Manufacturer Sun Microsystems
Country of Origin Sun-certified factories in America€™s/ EEC/ Far East.
Manufacturing
Standards
UL, FCC, IEC, EN, ISO, etc.
Kindly refer to technical brochures provided for detailed numbers of
above standards.
Operating systems supported
Sun Solaris Operating Environments 8, 9, 10, SPARC Platform Edition
Solaris 10 operating system, x86 Platform Edition
Red Hat Linux AS 3.0
Microsoft Windows 2000 Advanced Server and Windows 2003 Server
IBM AIX 5.1
HP-UX 11i
Novell Netware 5.1 and 6.5
SUSE LINUX Enterprise Server 9.0, (32-bit and 64-bit) Proposed Configuration
Expansion
Expandable Up to 3.6TB per enclosure and Up to 68.4TB of raw capacity per rack cabinet.
Supported drives are 73GB 10Krpm, 146GB 10Krpm, 300GB 10Krpm, 73GB 15Krpm, and 146GB
15Krpm and is expandable to support up to two 2RU expansion trays (36 drives total).
Proposed Configuration
Proposed with 365GB (5x 73GB Ultra 320 SCSI HDD)
Interface
STS AlertONE Technical & Financial proposal €“ Mobilecom
STS_Tech_Mobilecom_AlertOnet v 5 0.doc Page 38 of 73
CONFIDENTIAL© Copyright STS (2006) Stamp / Signature
320MB SCSI LVD
Ports and Controllers
Upgradeable to dual (mirrored) RAID controllers
All configurations have 2 Host ports
Management Software
All needed Management Software is included such as Sun StorEdge Configuration Service; and Sun
StorEdge Diagnostic Reporter software
Power and Cooling
Dual hot-swap, redundant, load-sharing power supplies with dual independent AC inputs
Hot-swap, redundant electrically-isolated redundant cooling fans
RAID Level Support
RAID 0, 1, 0+1, 3, 5, 3+0, and 5+0
LUN€™s
Up to 128 LUN€™s with LUN Masking [Security]
Server Controllers
2 x UltraSCSI adapters are proposed one for each server.
appreciate any feedback
thanks
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
Hi,
I have a question to do..
can I install sql server 2005 express edition on a windows storage server 2003 R2????
Thank-you!!
MTV
Hi all,
I have created a small COM in C# so that I can programatically create and execute stored procedures with SMO. At this point the COM has nothing in it but just a test prototype.
But when I tried to create the object as follows, I get the error indicated below.
It is not a memory issue because I have adequate storage and RAM.
Please Help!
DECLARE @object int
DECLARE @hr int
DECLARE @property varchar(255)
DECLARE @return varchar(255)
DECLARE @src varchar(255), @desc varchar(255)
-- Create an object.
EXEC @hr = sp_OACreate 'SQLInterop.CsharpHelper', @object OUT
IF @hr <> 0
BEGIN
EXEC sp_OAGetErrorInfo @object, @src OUT, @desc OUT
SELECT hr=convert(varbinary(4),@hr), Source=@src, Description=@desc
RETURN
END
This is the error I am getting:
Error Code: 0x8007000E
Description: Not enough storage is available to complete this operation.
Source: ODSOLE Extended Procedure
This is the C# code for the COM:
using System;
using System.Runtime.InteropServices;
using System.Reflection;
using System.Runtime.CompilerServices;
using System.EnterpriseServices;
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
[assembly: AssemblyTitle("CSServer")]
[assembly: AssemblyDescription("Test SQL .NET interop")]
[assembly: AssemblyDelaySign(false)]
[assembly: AssemblyKeyFile("MyKey.snk")]
// Setting ComVisible to false makes the types in this assembly not visible
// to COM components. If you need to access a type in this assembly from
// COM, set the ComVisible attribute to true on that type.
[assembly: ComVisible(true)]
// The following GUID is for the ID of the typelib if this project is exposed to COM
[assembly: Guid("ff35c6b4-81bf-47dd-9290-fcbbb49008d9")]
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Revision and Build Numbers
// by using the '*' as shown below:
[assembly: AssemblyVersion("1.0.0.1")]
[assembly: AssemblyFileVersion("1.0.0.1")]
// the ApplicationName attribute specifies the name of the
// COM+ Application which will hold assembly components
[assembly: ApplicationName("SQLInterop")]
// the ApplicationActivation.ActivationOption attribute specifies
// where assembly components are loaded on activation
// Library : components run in the creator's process
// Server : components run in a system process, dllhost.exe
[assembly: ApplicationActivation(ActivationOption.Server)]
namespace SQLInterop
{
public interface ITest
{
string SayHello();
string SayIt(String strMessage);
}
//[SecurityRole("RBSecurityDemoRole", SetEveryoneAccess = true)]
[ComVisible(true)]
[CLSCompliant(false)]
[ClassInterface(ClassInterfaceType.None)]
public class CSharpHelper : ITest
{
public string SayHello()
{
return "Hello from CSharp";
}
public string SayIt(String strMessage)
{
return strMessage + ": from CSharp";
}
}
}
Hi,
Is there any way to measure bandwith usage during merge replication between sql server 2005 and sql server mobile 2005 running on a cradled wm5 mobile device.
Attaching the windows performance monitor to the network connection established over usb would work although I was wondering if there was something specific for this case integrated into Sql server 2005 / sql server mobile 2005 / Sql server management studio / third party tools that i could use ?
thnx,
pdns.
Hi,
I have a central database server that is runnning on SQL 2005 standard edition and Windows server 2003 standard as OS.
I realise that I can use SQL statements to encrypt and decrypt the data inside the standard SQL.
However, how do I read and write the data via an web application coded in C#.net and is also running on the same machine?
Another issue is, I need to replicate some of the data in this SQL standard over to a SQL mobile running on a mobile device running on Windows CE 5.0.
The mobile device also needs to read and write data to the encrypted data via a C#.net application.
Question is, with all these requirements to be met, can I use AES? I know that AES is not available on Windows XP and Windows Server 2000 and I cant find AES in the .net compact framework.
how do i go about ensuring security? how do I ensure that the symmetric key is the same both on the SQL standard and SQL mobile?
thank you.
hi,
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Thanks.
I have written following code in my application
I just want to display all the data of a Single table into a Data Grid, I know that we can drag and drop the table on to a form and datagrid is generated, but here I want to retrive those values through my code, how should i do that
I am getting following errors while running the program
Error 1) Error No. 28037, MS SQL Server 2005 Evrywhere Edition
Error: A request to send data to the computer running IIS has failed. For more information see HRESULT
Error 2) Error No. 0, SQL Server 2005 Evrywhere Edition ADO.Net Data Provider
Error: The specified table does not exist [ JobLists ].
Can anybody please tell me, where I went wrong ??? In this code anywhere else????
Note: While adding a Data Source of SQL Server 2005 Mobile Edition, I have added that .sdf file into my project, thats why I have written the Data Source as : .DbFile.sdf
@"Data Source = .DbDotNetCF.sdf";
The code is as follows:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlServerCe;
namespace DeviceApplication1
{
public partial class Form1 : Form
{
string filename = @".DbDotNetCF.sdf";
private DataSet dsJobLists;
public Form1()
{
InitializeComponent();
}
private void DeleteDB()
{
if (System.IO.File.Exists(filename))
{
System.IO.File.Delete(filename);
}
}
private void Sync()
{
SqlCeReplication repl = new SqlCeReplication();
repl.InternetUrl = @"http://localhost/WebsiteDotNetCF/sqlcesa30.dll";
repl.Publisher = @"RAHU";
repl.PublisherDatabase = @"DotNetCF";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"PubDotNetCF";
repl.Subscriber = @"SubDotNetCF";
repl.SubscriberConnectionString = @"Data Source='" + filename + "';Max Database Size=128;Default Lock Escalation =100;";
try
{
if (!System.IO.File.Exists(filename))
{
repl.AddSubscription(AddOption.CreateDatabase);
}
repl.Synchronize();
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
finally
{
repl.Dispose();
}
// Display Same Data In Another DataGrid : dataGrid1
SqlCeConnection cn = new SqlCeConnection(@"Data Source='" + filename + "'");
SqlCeDataAdapter daJobLists = new SqlCeDataAdapter("SELECT JobListsID, JobID, PersonID FROM JobLists", cn);
if (dsJobLists == null)
{
dsJobLists = new DataSet();
}
try
{
dsJobLists.Clear();
daJobLists.Fill(dsJobLists, "JobLists");
dataGrid1.DataSource = dsJobLists.Tables["JobLists"];
}
catch (SqlCeException ex)
{
DisplaySQLCEErrors(ex);
}
}
private void DisplaySQLCEErrors(SqlCeException ex)
{
for (int i = 0; i < ex.Errors.Count; i++)
{
MessageBox.Show("Index #" + i.ToString() + ""
+ ex.Errors.Source + ""
+ "Error: " + ex.Errors.Message,
"Error No. " + ex.Errors.NativeError.ToString());
}
}
private void Form1_Load(object sender, EventArgs e)
{
Sync();
DeleteDB();
if (DbDotNetCFDataSetUtil.DesignerUtil.IsRunTime())
{
// TODO: Delete this line of code to remove the default AutoFill for 'dbDotNetCFDataSet.JobLists'.
this.jobListsTableAdapter.Fill(this.dbDotNetCFDataSet.JobLists);
}
}
}
}
I have created a merge replication correctlly( I suppose, there were no errros)
Please help
Your help will be appriciated
Hello Everyone,
I'm trying to connect to Desktop SQL Server 2000 from Windows mobile PC Emulator (VS 2005). I need a direct connection using connection string to SQL Server 2000 through local wireless network without IIS.
Bellow is the code that I use. After executing this code I get an error on line Conn.Open(). Error says SQL Server does not exist or access denied.
SQL is un and running, and I can log in using SA username from the desktop. Even if I chance IP for another SQL server in my connection string I still get the same error. There is no firewall of any kind running.
Dim connectionSTR As String = "Persist Security Info=False;Integrated Security=False;Server=192.168.0.202,1433;initial catalog=MyDB;user id=sa;password=;"
Dim Conn As SqlConnection
Conn = New SqlConnection(connectionSTR)
Conn.Open()
If Conn.State = ConnectionState.Open Then
MessageBox.Show("Open")
End If
About my environment: SQL Server 2000 is running on Desktop PC with Windows XP SP2. Application which I need to connect to SQL Server is in Visual Studio 2005. I execute the application in Windows Mobile PC Emulator and try to connect to SQL Server from emulator.
Your advice and help is very appreciated
Thank you
Ika
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
Hi,
View 3 Replies View RelatedHi All,
View 14 Replies View RelatedHello,
I am developing a mobile application in which i have to create a database..
My database contains relationships between its tables..
I would like to know what is the best solution for developing the database?? SQL mobile edition or RMS!!!
If you say RMS, how should i create the relationships between my tables??
thnx
Hi All:
I need one clarification. Can i use sql server Mobile 2005 and vs 2003 (.NetCF 1.0) for my application.
Thanks
Vamsi
Hi,
Could someone pl explain how is SQL Server mobile 2005 licensed. Do we need to buy license for each device ? or CAL?
In my app, I need a database which is accessed by .net compact framework app. synchronization is also done by our own app, no direct communication from sql server mobile to sql server db. we have a server side .net app which talks to the sql server and a windows mobile app which talks to the sql mobile db, these two .net apps talk to each other like:
sql server mobile db <--->.net compact framework app <--->.net desktop app <-->sql server 2005
Needless to say, there would be multiple devices having the above setup. However only one desktop side app and database. In this scenario, how would licensing be calculated?
regards,
D2
Hi,
View 36 Replies View RelatedI have a working Pocket PC 2003 app that uses RDA to exchange data with SQL Server 2000. I'm attempting to port it to a Windows CE 5.0 device. (I'll be porting to Mobile 5 in the near future, but the gadget I have at the moment is CE).
I installed SQL Server 2005 Mobile Edition on the computer running IIS according to package directions, and used the wizard to set up a virtual directory with sscesa30.dll.
The directory I was previously using with sscesa20.dll is still there, and still works.
I set up the virtual directory to use basic authentication without SSL. (I know that's not advisable). I have confirmed that I can reach the URL using the username and password I supplied to the wizard.
When I try to pull data I get the following:
------------------- SQL CE Exception
Error Code: 80004005
Message : An error has occurred on the computer running IIS. Try restarting the IIS server.
Minor Err.: 28022
Source : Microsoft SQL Server 2005 Mobile Edition
I have tried restarting IIS without effect. Any clues?
Can't get winmobile 5 to connect to my sql server 2005 (using vs2005). Here's the connect string:
"Data Source=tcp:XXXXXXdefault,1433;Database=YYYYYY;" _
& "Integrated Security=SSPI;"
This very same string, and variations of it, work in a vs2005 winforms app, but not a windows mobile 5. I'm (obviously) using system.data.sqlclient. MS documentation says it's supported on both platforms with no syntax changes. Any suggestions?
I have use this guide to make a application for windows mobile 5.0. http://msdn.microsoft.com/vstudio/tour/vs2005_guided_tour/VS2005pro/Smart_Client/DataBinder.htm Everything is work. I can add, remove data in the dataset. But i can't update the sql server database. can somebody tell me whats wrong? Nitro.
View 4 Replies View RelatedI Have a smart device application developed in VS 2003 (VB.Net) and Sql server ce 2.0. Now I have upgraded the application to VS 2005 (VB.Net). My question is, Can the Application developed in VS 2005 can communicate with Sql server ce 2.0 and Sql server 2000 sp4 or Do I need to change the Sql server ce 2.0 to sql server 3.0 to work with windows Mobile 5 and Pocket PC 2003 SE devices ?
View 3 Replies View RelatedHow do i set up a connection between sql mobile and sql server 2000?
I think all the packages are installed but how can i synchronize data from sql mobile to server 2000 and the other way???