Sql Server Service Wouldnt Start
Apr 4, 2007
here is the error log. instance is already on SP2. all of a sudden instance stopped. any idea?
2007-04-04 16:34:16.31 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-04-04 16:34:16.31 Server (c) 2005 Microsoft Corporation.
2007-04-04 16:34:16.31 Server All rights reserved.
2007-04-04 16:34:16.31 Server Server process ID is 2748.
2007-04-04 16:34:16.31 Server Authentication mode is MIXED.
2007-04-04 16:34:16.31 Server Logging SQL Server messages in file 'S:Microsoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-04-04 16:34:16.31 Server This instance of SQL Server last reported using a process ID of 4720 at 4/4/2007 4:32:23 PM (local) 4/4/2007 8:32:23 PM (UTC). This is an informational message only; no user action is required.
2007-04-04 16:34:16.31 Server Registry startup parameters:
2007-04-04 16:34:16.31 Server -d S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-04-04 16:34:16.31 Server -e S:Microsoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-04-04 16:34:16.31 Server -l S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-04-04 16:34:16.31 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-04-04 16:34:16.31 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-04-04 16:34:16.42 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-04-04 16:34:16.45 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-04-04 16:34:18.01 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-04-04 16:34:18.01 Server Database mirroring has been enabled on this instance of SQL Server.
2007-04-04 16:34:18.03 spid5s Starting up database 'master'.
2007-04-04 16:34:18.03 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-04 16:34:18.03 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-04 16:34:18.03 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-04 16:34:18.03 spid5s FCB:pen failed: Could not open file S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf for file number 1. OS error: 5(Access is denied.).
2007-04-04 16:34:18.03 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-04 16:34:18.03 spid5s Unable to open the physical file "S:Microsoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf". Operating system error 5: "5(Access is denied.)".
2007-04-04 16:34:18.05 spid5s Error: 17207, Severity: 16, State: 1.
2007-04-04 16:34:18.05 spid5s FCB:pen: Operating system error 5(Access is denied.) occurred while creating or opening file 'S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2007-04-04 16:34:18.05 spid5s Error: 17204, Severity: 16, State: 1.
2007-04-04 16:34:18.05 spid5s FCB:pen failed: Could not open file S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
2007-04-04 16:34:18.05 spid5s Error: 5120, Severity: 16, State: 101.
2007-04-04 16:34:18.05 spid5s Unable to open the physical file "S:Microsoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf". Operating system error 5: "5(Access is denied.)".
View 2 Replies
ADVERTISEMENT
Mar 17, 2008
I successfully installed SQL Server 2005 and then used the ALTER DATATBASE statement to move around my data and log files for Model, MSDB and TEMPDB. I stopped SQL SERVER Services and physically moved the files to their new locations.. now the service won't start? I get this in the SQL Server ERROLOG:
Starting up database 'model'.
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'E:MSSQLAMLDataFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open failed: Could not open file E:MSSQLAMLDataFiles for file number 1. OS error: 5(Access is denied.).
2008-03-17 15:57:01.29 spid4s Server name is 'KOCSQLDEV01AML'. This is an informational message only. No user action is required.
2008-03-17 15:57:01.29 spid9s Error: 5120, Severity: 16, State: 101.
2008-03-17 15:57:01.29 spid9s Unable to open the physical file "E:MSSQLAMLDataFiles". Operating system error 5: "5(Access is denied.)".
2008-03-17 15:57:01.29 spid9s Error: 17207, Severity: 16, State: 1.
2008-03-17 15:57:01.29 spid9s FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'F:MSSQLAMLLogFiles'. Diagnose and correct the operating system error, and retry the operation.
2008-03-17 15:57:01.29 spid9s Error: 17204, Severity: 16, State: 1.
I can log on to the Server with the account that starts the services and open the .mdf and .ldf files in Notepad.. not sure what's going on.. I then gave the Domain Account that starts the Services Full Control on each of the volumes that I moved the files to.. I checked down to the file level to make sure that the permissions propogated.. the service still won't start.. can someone help?
View 7 Replies
View Related
Apr 7, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
Apr 7, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
Apr 8, 1999
I recently installed SQL Server 7.0 on my desktop workstation. I has been working great until yesterday when services wouldn't start. The Service Manager gave me a message "An error 1069 - (The service did not start due to a logon failure.) occurred while performing this service operation on the MSSQLServer service." It appears to be a permission problem, but my profile hasn't changed, I have admin rights on my workstation. Can anybody help?
View 1 Replies
View Related
Sep 7, 2006
Hi all
When i started the service, i am getting the following message
Starting up database 'master'.
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed
i don't have any backups for master database
is there any way i can restore it from .mdf, .ldf files..
Pls suggest..
Thanks in advance
View 12 Replies
View Related
Sep 18, 2007
Hello,
I had installed SQL express yesterday, and it did function, but due some other problems, i uninstalled it, and reinstalled SQL express 2005. Appearantly, there is some rest of the old installation, blocking me to start a new installation.
The link provided by the program (below) does not connect to any page.
I would appreciate some help, thanks in advance.
Regards,
Ruud
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlShutDownRANUInstance%40sqls%3a%3aService%3a%3aStart%40x3
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
View 1 Replies
View Related
May 1, 2006
I'm newbe with SQL Server , I'm looking for help with sql server express edition 2005. At the end of installation ocurrs an error:
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually.
Error Number : 29503 . (Summary file)
Rest of components has status : Successfully installed
I've go installed .Net Framework 2.0, I'm using XP with SP2 , no anty-virus software during instalatin is activated, the XP firewall is off during instalation.All system check requirements are passed successufully
(running on Athlon64)
No additional software bound with SQL is installed.(in add/remove programs there is nothing additional connected with sql)
I've re-installed it few times with some other options (network , local) ,different installation path ,but allways the same result - fail. I've tried to find help in few similar posts but that didn't help.Mayby i've miss somethin'
Could someone help ?
View 16 Replies
View Related
Jun 30, 2006
I have mentioned this problem before but it has not been resolved. I am installing MS SQL Server Express Advanced i.e. using SQLEXPR_ADV.EXE.
During the initial checks, i get a warning about hardware requirements and I have read the posts about the install failing if the CPU does not support prefetching but I am running a P4 3.0GHz (twin core) CPU with 512MB RAM on Windows XP Pro SP2.
The installation fails at SQL Server Database Services during "Configuring Microsoft SQL Server":
"Starting SQL Service: MSSQL$SQLEXPRESS"
If I click the Retry button, the system goes away and then comes back with the same message. If I click cancel, various roll-back actions are performed and the install fails
Is this the default name for the SQL Server instance ? I thought it would be named after my machine name i.e. GLKD239680SQLExpress ?
Any ideas anyone ? I have not had much luck with installing this despite 2 PC rebuilds and scanning the forums for solutions.... I can post any log files if needed
Thanks
View 1 Replies
View Related
Aug 30, 2006
I had a strange experience with MS SQL Server 2005 Express Edition installation, I am running a P4 3G Processor, 1 GB of RAM, Windows XP SP2, 300 GB HDD (SATA if it matters at all :) ) And using Visual Studio Pro 2005.
I have managed to install the SQL Express with no hassle at all, then had to format my HDD, and start from scratch, to make a new home for my VS 2005 Pro (The 300 GB HDD) And managed to install the SQL Express as part of the VS 2005 without any problems, after using it for 3 months now, I've started a new project in VS 2005, and tried to add a new SQL DB, but it had failed for several times.
I€™ve decided that the files got corrupted for some reason and tried to reinstall the MS SQL 2005 using the original SQL Express installation file I've used before, but without joy.
I thought that it is conflicting with some new MS Update patch and downloaded the latest SQL Express advanced installation, but that did not fix the problem either.
The message I'm getting every time I attempt the installation is" SQL Server service failed to start" with all the bla bla about the online books and whatever useless stuff to learn how to start the service manually.
I have uninstalled the whole thing, including VS 2005, .NET Framework, and any registry trace of the SQL Server installation, but again all in vain.
Finally, some smart wizard suggested in one of the threads that if your computer is not part of a domain, you should run the SQL service as a local service, using the advanced option during the first step of the setup.
And guess what! It worked!!!!
My Question is why did it work during the first two installations, without me fiddling with the advanced installation feature?
My computer was and still is, not part of any domain, my hardware did not change at all, and I had the installation failing with or without any software installed!
View 1 Replies
View Related
Apr 17, 2006
I have had SQL Server 2005 (Full Version) installed along with SQL Server Express and suddenly SQL Express quit starting and will not start manually. I have reinstalled VS 2005 (Team Edition for Software Dev) and tried to reinstall SQL Express but the installation fails when it tries to start the service. Any suggestions?
Keith
View 9 Replies
View Related
Oct 10, 2007
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
Joseph
View 29 Replies
View Related
Jan 29, 2004
Can Anyone explain why my Report Service does not start up during installation of reporting services.
ASPNET account has full permissions.
A previous Reporting Services beta was installed (and working) before.
Here's the event explanation:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities. ServerConfigurationErrorException: The Report Server has encountered a configuration error; more details in the log files ---> System.Exception: The configuration file contains an element that is not valid. The Permissions element is not a configuration file element.
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.ThrowInvalidFormat(String element)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseExtensionElement(XmlNode child, Extension& extension)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseDeliveryExtensions(XmlNode child, ExtensionArray array)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseExtensions(XmlNode child, ExtensionArray array)
at Microsoft.ReportingServices.Diagnostics.Extensions Configuration.ParseXML(XmlNode node)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.ParseDocument()
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Load(Boolean searchMultipleLocations, Boolean trapLoadFailures)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Load(Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation.Construct(String configFileName, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ation..ctor(String configFileName, String additionalSearch, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ationManager..ctor(String configFileName, String additionalSearch, Boolean searchMultipleLocations, Boolean trapLoadFailures)
at Microsoft.ReportingServices.Diagnostics.RSConfigur ationManager..ctor(String configFileName, String additionalSearch)
at Microsoft.ReportingServices.Library.Global.get_Con figurationManager()
at Microsoft.ReportingServices.Library.ServiceAppDoma inController.Start()
at Microsoft.ReportingServices.NTService.ReportServic e.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMai nCallback(Object state)
For more information, see Help and Support Center at
Thanks,
Tom
View 1 Replies
View Related
Aug 20, 2007
hey
I have a notebook with windows vista ultimate edition. For developement i have Ms visual studio 2005 and sql server 2005(with all the required and latest SPs) on it. For the past few months i have been working on the machine without any hitches. Just 2 -3 days back some windows updates got installed on the machine and guess what!!!!!! the sql server service just stopped working. The service wont start no matter what. I
have tried almost solution that i came across on the internet and it wont work out. I unistalled and reinstalled the server as but to no avail. The database engine now wont intall as the sql service wont start during the server installlation.
While browsing through the internet i didnt come across anyone with a similar problem! Am i the first one to be in such a situation
give your comments and share any relevant experience.
P.s the windows upgrades installed on the system were all security upgrades so why should they effect the sql server working.
Rgds
View 4 Replies
View Related
Mar 14, 2008
Hi Guys
I have my Sql server 2005 running perfectly (until yesterday) on vista. But today when I tried to connect to the server I get error 3417 meaning my master database needs rebuilt or repaired.
I tried all sort of techniques I found on internet like checking if my data files in data dir are not compressed and for the SQL Server Servies it logs on local account with interact with desktop checkbox checked. But no luck.
I tried to use setup.exe in my installer CD to rebuild master database but it seems the cmd doing nothing. To rebuild, I use the following command “start /wait setup.exe /qn INSTANCENAME=<instance> REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=<New SA Password>�. This cmd runs but due to some reason my master db is not being repaired. Ideally, I should see recent date change for this file.
Please advice how can I connect back to my server again making sure my databases are not lost.
View 3 Replies
View Related
Jul 20, 2005
SQL Server Enterprise Manager could not start the service 'MSDTC' on server'NTAS21'.1722 - (The RPC server is unavailable)I Setup A publication on a server called NTAS4D, then Pushed TheSubscription to another server called NTAS21. If I configure so that thechanges at the subscriber are not replicated to the publisher, all works ok,I make a change at the publisher, it is replicated to the subscriber.If I configure for updating at the subscriber, I am presented with a screenstating that the following services must be started for replication to work:SQL Server Agent on NTAS4D - RunningMSDTC on NTAS4D - RunningMSDTC on NTAS21 - UnknownWhen I complete the wizard, I receive the message listed above.The Servers are in two separate locations, each behind a NAT enabled routerusing the internet to transfer data between the publisher and subscriber.Any Suggestions will be greatly appreciated.ThanksSteve
View 1 Replies
View Related
Jul 16, 2007
Dear All,
I am not able to start the sql server 2005 database engine services...
Sql server 2005 server is installed in one machine(SERVER) and we have 10 client machine connecting to the server
When i try to start the service from the Service.msc in the SERVER i am getting the following error
===================================
Cannot connect to KEYSKILL.
===================================
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
------------------------------
Error Number: 2
Severity: 20
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Could any one help me to resolve the error
Thanks in Advance
Lalitha
View 6 Replies
View Related
Apr 25, 2007
Hi,
When I click on SQL Server agent I get the "Unable to start service error".
It says serivce started and stopped.
Anybody having any clue on what's going wrong. Please let me know.
Regards,
HV
View 3 Replies
View Related
Aug 20, 2007
hey
I have a notebook with windows vista ultimate edition. For developement i have Ms visual studio 2005 and sql server 2005(with all the required and latest SPs) on it. For the past few months i have been working on the machine without any hitches. Just 2 -3 days back some windows updates got installed on the machine and guess what!!!!!! the sql server service just stopped working. The service wont start no matter what. I
have tried almost solution that i came across on the internet and it wont work out. I unistalled and reinstalled the server as but to no avail. The database engine now wont intall as the sql service wont start during the server installlation.
While browsing through the internet i didnt come across anyone with a similar problem! Am i the first one to be in such a situation
give your comments and share any relevant experience.
P.s the windows upgrades installed on the system were all security upgrades so why should they effect the sql server working.
Rgds
View 1 Replies
View Related
May 18, 2015
I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is (1067) The process terminated unexpectedly.
  Â
   <Failure Type='Fatal' Error='1067'>
   <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>
   CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
   05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396
  Â
[code]...
View 3 Replies
View Related
May 13, 2008
Hello all,
We are deploying an application using SQL Server Express to a wide variety of desktop and laptop machines. We are currently trying to decide whether we should install the SQL Server instance service to start automatically at startup or not. In the latter case, our application would start and stop the service.
Starting automatically will make our app load more quickly, which is important to our users. However, our support team is concerned that leaving the service running will leave our databases vulnerable to becoming "suspect" if, for example, a laptop user's battery dies suddenly. Of course this will always be a problem if the app is running, but our support team believes that having the service running all the time will increase the chances of this happening. One reason for their concern is that an older version of the software used MSDE which was running all the time, and they saw a good number of suspect database issues.
What is the best practice for leaving the service running, especially when there are a lot of laptop users?
Thanks,
Ben
View 3 Replies
View Related
Dec 13, 2007
SQL Server Reporting Services 2005 Service would not Start on windows server 2003. Working great till yesterday and no changes were made to config file.
Here is the error in Event log
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 12/13/2007
Time: 8:25:59 AM
User: N/A
Computer: XXXXXXXXXXX
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Here is i found in log files
ReportingServicesService!resourceutilities!4!12/13/2007-08:25:59:: i INFO: Running on 0 physical processors, 1 logical processors
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Exception caught loading and setting code permissions policy level: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
ReportingServicesService!servicecontroller!4!12/13/2007-08:25:59:: e ERROR: Error Starting Service: System.Security.XmlSyntaxException: Invalid syntax on line 158.
at System.Security.Util.Parser.GetRequiredSizes(TokenizerStream stream, Int32& index)
at System.Security.Util.Parser.ParseContents()
at System.Security.Util.Parser..ctor(Tokenizer t)
at System.Security.SecurityManager.LoadPolicyLevelFromStringHelper(String str, String path, PolicyLevelType type)
at System.Security.SecurityManager.LoadPolicyLevelFromString(String str, PolicyLevelType type)
at Microsoft.ReportingServices.Library.ServiceController.SetAppDomainPolicy()
at Microsoft.ReportingServices.Library.ServiceController.StartService(Boolean firstStart)
View 1 Replies
View Related
Jun 22, 2007
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
View 1 Replies
View Related
Apr 15, 2001
We have changed the Network Domain name of a SQL server and restarted before changing any of the settings in SQL server. When we now try to start the SQL server service manager we get the following error
Your SQL server is either corrupt or has been tampered with. Unknown package id please rerun setup
Any suggestions on how to get the SQL server back on line without having to take the server down and changing the Netowrk Domain Name back ??
Cheers
SR
View 1 Replies
View Related
Aug 7, 2015
i m not able to start the SSIS service on my laptop . IT gives error saying SQL server integretion service 11.0 service on local computer started and then stopped . some services stop automatically if they are not in use by other services or program
i am not able to start SSDT . it gives error
microsoft visual studio is unabble to load this document to desigen integration service package in ssdt , ssdt has to be installed by one of these edition of sql server ; std enterprise,dev,or evloution
i hav installed sql 2012 evolution verison on my local desktop.
View 1 Replies
View Related
Mar 29, 2006
Is there a trick to getting this installed correctly? Everything works great until it gets up to starting the service. Here is the complete section of my setup log file.
SQL 2005 Standard.
Machine : KINGSERVER550
Product : SQL Server Database Services
Error : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
--------------------------------------------------------------------------------
Machine : KINGSERVER550
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_KINGSERVER550_SQL.log
Last Action : InstallFinalize
Error String : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1067) The process terminated unexpectedly.
Error Number : 29503
I searched a previous thread dealing with this error, but seems like nobody has found a solution.
--Tony
View 15 Replies
View Related
Mar 19, 2008
We encountered an error the other day that was causing us major head-aches trying to resolve.
Error: 1053 -- Could not start the SQL Server Integration Services service
In addition to SSIS not starting up, we had errors trying to launch Management Studio.
The above errors started happening after we deployed a small release that included editing the machine.config file.
To make a long story short, make sure the machine.config file is well formatted and is not missing any double quotes (") or < /> .
Hopefully this information can help someone out.
View 1 Replies
View Related
Aug 20, 2015
we had activity last night we need to truncate Transactional Logs we pressed Restart button to initiate service , but it stopped successfully and failed to start the SQL Server service.We did not find anything find anything unusual in log file. Please confirm are we facing any bug or needing any fixes to installed on the server.Windows Server 2008 R2 Standard Service Pack 1Â ( 64bit)
View 6 Replies
View Related
Nov 26, 2007
Hello all,
I am intsalling SQL 2005 in an activepassive cluster. The OS is Windows 2003 with SP1. Everything installs OK but the sql server service cannot start afterwards. There are many access errors in the Security Event log - see example below - and numerous "SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. " errors in both the SQL and Application event logs. I have tried installing SQL in both mixed mode and under Windows Authentication and get the same errors. I can install SQL 2005 outside of the cluster on both nodes. Other items of note: This was a SQL 2000 cluster. I uninstalled SQL 2K, the virtual name was changed (IP remained the same) and the DNS entry was updated to reflect the new name. Early in the installation process - 3 or 4 days ago - I got a few errors about the Server Principal Name had to be updated but when I do a setspn -l the both nodes are listed and the entries look fine, though there are no entries for the sql service (MSSQLSvc). Not sure if there should be entries for the virtual name, but there aren't any for either the old or new name. Does the new virtual name need to be added to AD? Here is the security error - Event ID is 560 and it looks like there's a problem with Remote Access and is generated when trying to access either node:
Category: Object Access
Type: Failure Audit
Event_ID: 560
User: NT AuthorityNetwork Service
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: RemoteAccess
Handle ID: -
Operation ID: {0,134558507}
Process ID: 1516
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: CM-OHCO-DS006B$
Primary Domain: SWNA
Primary Logon ID: (0x0,0x3E7)
Client User Name: NETWORK SERVICE
Client Domain: NT AUTHORITY
Client Logon ID: (0x0,0x3E4)
Accesses: Query status of service
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x4
One other informational message that may be of use - looks like there's a problem with dll's for remote access, though this isn't pertaining to SQL:
The description for Event ID ( 0 ) in Source ( srmservice ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: srmservice error: 0, Started the agent (srmagent.exe)..
View 5 Replies
View Related
Jul 18, 2005
I have a Windows 2003 Server SP1, Active Directory, Application Server and RIS installed on my computer. After installing SQL Server 2005 April CTP my DHCP Service fails to start. In the Event Viewer I see the following Events.
View 20 Replies
View Related
Apr 27, 2006
SSIS doesn`t start after applying SQL Server 2005 SP1
I get an error Message in event log
event id 7000 source: Service Control Manager Type: Error
Message:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
regards
Lothar Belle
View 4 Replies
View Related
Oct 11, 2001
Something very weird happened this morning... I booted my computer as usual, but for some reason SQL service stopped by itself. I tried to start it again, but it just doesn't respond. I open up Service Manager, clicked on refresh services, but still no response. The "start service" button is available for me to press, but when I press it it doesn't seem to do anything.
Note that sql service was running last night as I switched off computer. I haven't changed anything since.
Any clues, guys?
View 3 Replies
View Related
Apr 13, 2006
hello forum,
i have problem after installing SQLServer 2000 Developer Edition.
i try to start the service from Service Manager window, but i can't start it. It says:
"The service did not start due to a logon failure.
An error 1069 - (The service did not start due to a logon failure.)
occured while performing this service operation on the MSSQLServer service."
please help me to solve this problem. i'm getting a little frustated
View 3 Replies
View Related
