Sql2005 ODBC Driver Manager Data Source Name Not Found And No Default Driver Specified
Feb 4, 2008
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
View 1 Replies
ADVERTISEMENT
Oct 19, 2006
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
Thanks!
Dan <><
View 17 Replies
View Related
Mar 12, 2007
I know this may be a simple problem, but here it is:
I have SQL server express installed on Windows 2003 server (Testing) it works fine;
When I move it to my production server (Windows 2003) I get the error message"Data source name not found and no default driver specified "
The system DSN in ODBC connections works fine, or at least completes the test ok.
My application is written in Classic ASP
PLEASE HELP
Thanks
View 2 Replies
View Related
Oct 30, 2006
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified]
System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35
System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131
System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.Odbc.OdbcConnection.Open() +37
DBConnection.open() +12
ASP.global_asax.Session_Start(Object sender, EventArgs e) +35
System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182
System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
View 8 Replies
View Related
Feb 26, 2008
Hi SQL Server Team,
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
rc = SQLConfigDataSource(NULL, ODBC_ADD_DSN, type_of_driver, parameters);
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time.
rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner.
rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr),
&outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
An early reply will be appreciated.
Cheers & Regards,
Saresh
View 1 Replies
View Related
Oct 28, 2004
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
View 1 Replies
View Related
May 12, 2008
Hi all,
We are using a package to extract data from a source build on some image using SOLID ODBC 5.2 driver.
When we tried to extract data through MS SSIS(SQL Server Integration Services) package using SOLID 5.2 ODBC driver connection, it throws an error as mentioned below:
ERROR DESCRIPTION:
Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Also, we tried the same in a Excel sheet using the SOLID 5.2 ODBC driver it is working fine.
Does the SOLID ODBC driver support .Net framework or do we need to install any other components??
Thanks and Regards,
Nirmal
View 2 Replies
View Related
Apr 6, 2001
I have a new MS SQL 7 server with patch 3.
I am getting this error from a MS SQL client pc, whend I use the SQL server Query analyzer, both logon options "SQL Server or Windows authentication"
I even tried the SA account.
here is the error I get.
MSG 6 Level 16 State 1 ODBC SQL Server Driver name Pipes specified SQL Server
not found.
Any help will be apriciated thank you.
Jorge
View 1 Replies
View Related
Nov 26, 2007
I am testing an application that uses mysql that works 100% fine with Microsoft Windows XP on Windows Vista Premium Home Edition.
Using Vista's ODBC Data Source Administrator I have set up and successfuly tested the DSN Connection to the Database.
However, when I call the set up DSN with the application I get [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
I am using the mysql-connector-odbc-3.51.12-win32.
I have tried editing the registry DSN files - the problem still persists.
Does anybody know a way to solve this problem
View 1 Replies
View Related
Jun 28, 1999
A developer installed a FoxPro application on my workstation and every time I connect to SQL Server 7 I get the following message:
The ODBC resource DLL(C:WINNTSystem32odbcint.dll) is a different version than the ODBC driver manager (C:WINNTSystem32odbc32.dll).
You need to reinstall the ODBC components to ensure proper operation.
I can still connect to the database and everything seems to work but I want to correct this problem. Could anyone tell me how to reinstall the ODBC components? I tried reinstalling SQL Server 7 on my workstation but it tells me that I have not selected any components, even though everything is selected. Do I need to uninstall SQL Server and then reinstall it?
Thanks in advance.
Mike
View 2 Replies
View Related
Sep 12, 2001
Receiving error "Microsoft ODBC Server Driver Timeout Expired".
This is happening when running queries or stored procedures through VB6 and also in Enterprise Manager.
Have set query timeout to 0 and command timeout to 0 but no joy.
Enterprise manager cannot even perform a count of records (16Million) without timeing out.
Can anyone help...at end of tether!
Cheers,
Brookesy
View 1 Replies
View Related
Apr 26, 2006
I am trying to use a DTS package to extract data from an old Pervasive SQL 2000 (Btrieve) data source, and copy into an MS SQL Server table.
I have installed the Pervasive ODBC driver and got linked tables in Access working. I can see the data.
When I create the DTS package, it shows a list of the tables in the drop-down, but when I hit the Preview button I get an unspecified error. I can finish setting up the DTS package, the new MS SQL Sever table gets created, and the field transformations all look correct. However, when I execute the package it fails. In the logs, I get an unspecified error, the only error code I get in log is: 80074005.
Please help.
Thanks!
View 3 Replies
View Related
Jul 20, 2005
hi all,I am trying to create a dts package to transfer data from tables in mysql server 2000 database to a db2 UDB v8.1.4 database. When I use ibmdb2 oledb driver for the destination this works fine except that rowsare committed on a row by row basis thus performance is slow. I wantto use the odbc driver but when I define it as the destination, i geterrors saying that the maximum number of rows failed has exceeded theminimum.Does anybody know what to do in order to get the transfer workingusing ibm db2 odbc as the datasource?ThanksLyn
View 2 Replies
View Related
Feb 18, 2004
Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
View 1 Replies
View Related
Sep 5, 2007
Hi,
in SSIS I read data from a DB2 database on AS400 using the Client Access ODBC Driver for DB2 from IBM and write it to a SQL Server database. Since it does not work using the odbc driver as data source directly, I use a data reader component with .net providersodbc.
Some special characters were not translated correctly when read from DB2. They show up as ? in the SQL Server target table.
I tried to change the client locale in the ODBC connection properties but it did not help me. I tried changing all other settings in odbc but it still does not work.
In dts I could source all the data without this problems and good speed using the same nodbc driver.
The OLEDB Providers delivered with SSIS do not work in SSIS or I am too stupid to configure them correctly. They are even too slow as I explained above.
I cannot use the MS OLEDB Provider for DB2, because it works only in Enterprize Edition and we only have the Standard Edition.
Thus, only using Client Access ODBC Driver for DB2 with net providersodbc (as bridge) is performant enough and works on Itanium. But how to work around the problem with the special characters?
Best regards,
Stefoon
View 3 Replies
View Related
Oct 28, 2015
i am on a 2008r2 machine and need to add a microsoft excel odbc driver but its missing.
View 2 Replies
View Related
May 9, 2008
Hi,
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
Error message:
dtswiz 1390-e20 EXIT SQLTablesW with return code -1 (SQL_ERROR)
HSTMT 003C3108
WCHAR * 0x00D27EB8 [ -3] "? 0"
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00000000 [ -3] <empty string>
SWORD -3
WCHAR * 0x00164804 [ -3] "TABLE 0"
SWORD -3
DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)
Best Regards,
Murthy
View 1 Replies
View Related
Jun 1, 2015
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
View 9 Replies
View Related
May 13, 2007
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
View 14 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
Jan 9, 2007
We are getting a failure when upgrading to SP1 for SQL2005. We're running Windows 2003 Enterprise Edition SP1. We're running 4 SQL 2005 instances and 6 SQL 2000 instances on this machine. One of the four 2005 instances did upgrade successfully - don't know how or why.
Looking at other postings, it seems that the 10 lines or so preceding "value 3" in the upgrade log file (under C:WINDOWSHotfixSQL9Logs) are helpful in diagnosing the problem.
Here are the lines preceding the value 3:
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Mon Jan 08 13:38:23 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2001' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Mon Jan 08 13:38:23 2007
Gathering darwin properties for failure handling.
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
Error Code: 2001
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (50!8C) [13:38:25:219]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The specified driver is invalid.
<Failure Type='Fatal' Error='2001'>
<EndFunc Name='LaunchFunction' Return='2001' GetLastError='0'>
MSI (s) (50:F0) [13:38:25:251]: User policy value 'DisableRollback' is 0
MSI (s) (50:F0) [13:38:25:251]: Machine policy value 'DisableRollback' is 0
Action ended 13:38:25: InstallFinalize. Return value 3.
Thanks,
Bruce
View 1 Replies
View Related
Dec 19, 2006
HI,
We are migrating SQL2000 to SQL2005, we are using sql2005 jdbc driver 1.0.
I got this error "com.microsoft.sqlserver.jdbc.SQLServerException: Server failed to resume the transaction", when my application calls a stored procedure which is a transaction.
Does anyone know what could be the problem, how to fix it?
Thanks in advance.
View 5 Replies
View Related
Dec 2, 1999
What is the most current ODBC driver version for SQL 7.0? Also is there a link to Micrsoft's site where this can be found?
View 3 Replies
View Related
Apr 4, 2008
We now have both the 32 and 64 bit odbc driver. We installed V5R4 of client access. But SSIS doesn't seem to see the 64 bit ODBC(DSN I set up) it is only showing me the 32 bit(DSN that I set up). Is this a limitation within SSIS?
View 5 Replies
View Related
Sep 21, 1999
does anyone know where i can find an ODBC sql7.0 vers. 3.70.06.23 installation routine?
View 1 Replies
View Related
Feb 15, 2004
Hi,
Do we have Microsoft ODBC Driver for DB2?. If we do then how we can get?.
Thanks,
Ravi
View 2 Replies
View Related
Feb 8, 2005
Hello,
I would be grateful if you could show me where I can download SYbase ASE ODBC Driver. I have searched almost the whole WEB for it but so far to no avail.
Thanks in advance.
Albert
View 2 Replies
View Related
Feb 8, 1999
In moving from odbc driver 2.65 to 3.6, we are getting a new error message.
'Unable to connect to data source xxxxx. Your user name or password may be incorrect.'
[Microsoft][ ODBC Driver Manager] Driver does not support this function. Has anyone else
had this problem? Thanks for any assistance. Karen Suenram
View 1 Replies
View Related
Aug 21, 2002
I have just restored a database which is quared thru a program written in visual basic. I need to set up the ODBC data source on the workstations and keep getting the error Sql server Error:4064 can not open user default database. Any ideas? also when you restore a database do the users & permissions come with the restore?
View 1 Replies
View Related
Sep 1, 2004
Hi,
I am presently using Client Access ODBC driver (32-bit) to connect to the AS400. I have set up a linked server that enables me to run queries against the AS400 using the driver. However I seek to have a driver that could give better performance. Right now I can extract 6 million rows from the AS400 table in like 2 hrs. Now is there an ODBC driver that can do better than that? Also I seek an evaluation edition of the driver if possible. Moreover I am the only developer and so a single user license is what I can have my supervisor budget.
Thanks,
Vivek
View 1 Replies
View Related
Mar 16, 2004
Hi,
I have the following requirement :
I need to have a way to intercept the SQL queries from an application written in VB and using a ODBC driver and modify the SQL queries before it goes through the ODBC driver and then to the database. This I need to do without modifying the original application.
The solution I have in mind is to write a ODBC virtual driver and configure my application to use my virtual ODBC driver. The ODBC virtual driver in turn will use the actual ODBC driver to the database. The virtual driver will basically intercept the SQL queries, modify it and then give it to the real ODBC driver.
My question is
1. Is this a feasible solution?
2. What should I do in order to implement the vitrtual ODBC driver.
3. Any pointer will be appreciated.
Thanks
Jake.
View 3 Replies
View Related
Mar 29, 2004
Hi,
I need transformation data from files Btrieve (.dt) to any other formats. Where i can download driver ODBC or OLE DB for Btrieve?
And how install this driver?
Thank.
View 7 Replies
View Related
Feb 9, 2007
Could someone tell me how to use a query with a "connection string" to connect to an ODBC driver and retrieve data from its tables. I am new at this and have been having a lot of trouble connecting from the SSIS manager. If someone has a tutorial on how to do this. I would really appreciate it.
Thanks
View 3 Replies
View Related
