Hi all,
I drag sqldatasource to my form, and then adding a button there. I want when clicking the button to be able to use the sqldatasource1.select statement . I found some parameters that this method used but still dont know how to figure it out, which was
IEnumerable Select (DataSourceSelectArguments a)
for example when the button it clicked I want to perform the
select * from employee
Thanks
I have multiple SqlDataSources on a page. I only want them to execute the select query when the user performs a certain action. Is this possible? Or do they all execute as soon as the page is loaded?
View 1 Replies View RelatedHello all,
I have been working with a DetailsView control for the past week and it is a great control, but also lacks on some departments. Anyhow I need to know what the best approach for this scenerio would be?
I have a SqlDataSource"
<asp:SqlDataSource ID="SqlUpsertAffiliateDetails" runat="server" ConnectionString="<%$ ConnectionStrings:connectionstring %>"
SelectCommand="SELECT am.affiliate_id AS AffiliateId, am.member_id AS MemberId, m.First_Name, m.Last_Name, am.category_id AS CategoryId, ac.category_name, am.profile_web_address AS WebAddress, am.profile_email_1 AS Email, am.comments AS Comments, am.date_modified FROM tAffiliateMaster AS am WITH (NOLOCK) INNER JOIN tAffiliateCategories AS ac WITH (NOLOCK) ON am.category_id = ac.category_id INNER JOIN rapdata..Member AS m WITH (NOLOCK) ON am.member_id = m.Member_Number WHERE (am.affiliate_id = @AffiliateId)"
UpdateCommand="spUpsertAffiliateProfile" UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter Name="AffiliateId" QueryStringField="affiliate_id" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="Action" Type="Byte" DefaultValue="2" />
</UpdateParameters>
</asp:SqlDataSource>
And my SP:/* 09-19-07 Used to update affiliate profile */
CREATE PROCEDURE spUpsertAffiliateProfile
@Action tinyint,
@AffiliateId int,
@MemberId int = -1,
@CategoryId int,
@WebAddress varchar(50),
@Email varchar(50),
@Comments varchar(1500)
AS
SET NOCOUNT ON
-- Find errors first, check is not needed if deleting
IF @Action <> 3
IF NOT EXISTS (SELECT Member_Number FROM rapdata..Member_Association WHERE Member_Number = @MemberId AND Status = 'A' AND Association_ID = 'TRI' AND Bill_Type_Code LIKE '%AF%')
BEGIN
SELECT retval = 'A qualified member ID was NOT found. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1
IF EXISTS (SELECT member_id FROM tAffiliateMaster WHERE member_id = @MemberId)
BEGIN
SELECT retval = 'This member has already been listed. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1 AND @AffiliateId = 0-- insert
BEGIN
INSERT INTO tAffiliateMaster
(member_id, category_id, profile_web_address, profile_email_1, comments)
VALUES
(@MemberId, @CategoryId, @WebAddress, @Email, @Comments)
SELECT retval = 'Record Entered', errorcount = 0, @@IDENTITY AS affiliate_id
RETURN
END
ELSE IF @Action = 2 AND @AffiliateId > 0-- update
BEGIN
UPDATE
tAffiliateMaster
SET
category_id= @CategoryId,
profile_web_address=@WebAddress,
profile_email_1=@Email,
comments=@Comments
WHERE
affiliate_id = @AffiliateId AND member_id = @MemberId
SELECT retval = 'Record Updated', errorcount = 0, @AffiliateId AS affiliate_id
RETURN
END
ELSE IF @Action = 3 AND @AffiliateId > 0-- delete
BEGIN
DELETE
tAffiliateMaster
WHERE
affiliate_id = @AffiliateId
SELECT retval = 'Record Deleted', errorcount = 0, 0 AS affiliate_id
RETURN
END
GO
My question is how will I be able to return the retval? Will I need to do it within the code behind of the SqlDataSource Updated Event?
Thanks!
Hi Everyone,
I am trying to change the select statement of an sqldatasource if a check box is checked.
I am using the SqlDataSourceSelectingEventArgs but i can't get it to work, anyone got any pointers?
Code BehindProtected Sub LocMan_Searching(ByVal sender As Object, ByVal e As SqlDataSourceSelectingEventArgs) Handles LocManSearch.Selecting
If cb_Today.Checked = True ThenLocManSearch.SelectCommand = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%' + " & dd_Area.SelectedValue.ToString() & "+ '%') AND [available] LIKE '%' + " & Date.Today & "+ '%')"
Else : LocManSearch.SelectCommand = "SELECT * FROM [LocMan_CV] WHERE ([area] LIKE '%' + " & dd_Area.SelectedValue.ToString() & " + '%')"
End If
End Sub
My SQLDATSOURCE
<asp:SqlDataSource ID="LocManSearch" runat="server" ConnectionString="<%$ ConnectionStrings:MYLOCDEVConnectionString %>" >
<SelectParameters>
<asp:ControlParameter ControlID="dd_Area" Name="area" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
Thanks in advance
Chris
I wish to dynamically assign Select Statement to SqlDataSource. Anyone has any idea?? Is it possiable at all?
I am coding using C# under Framwork 2.0
How can i assign select statement to a sqldatasource
I mean if the user clicks button 1
sqldatasource=-"select * from customers where status='ClOSED' "
or else if the user clicks button2
sqldatasource="Select * from Customers Where Status='OPEN' "
I want to bind the sqldatasource to a gridview finally .
Is this possible ?
I tried sqldatasource filters But am reallly confused
Any suggestions/solutions are appreciated
thankyou
Hi you all,
In abc.aspx, I use a GridView and a SqlDataSource with a SelectCommand. The GridView's DataSourceID is the SqlDataSource.
In abc.aspx.cs, I would like to use an IF statement in which if a criterion is not satistied then I will use the SqlDataSource with another SelectCommand string. Unfortunately, I have yet to know how to write code lines in order to do that with the SqlDataSource. Plz help me out!
Is there a way to retreive the SQL Statement with the values from the parameters merged together? I know how to retreive the SQL Select Statement and the parameters separately but I need to retreive the final SQL.
For example:
SELECT name FROM employee WHERE id = @id
I would like to retreive from SQLDataSource
SELECT name FROM employee WHERE id = 1
Thank you
What is the C# code I use to do this?
I'm guessing it should be fairly simple, as there is only one row selected. I just need to pull out a specific field from that row and then insert that value into a different SqlDataSource.
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
I have the following query but i need to add an IF Statement in as well,
SELECT HomeTeam, HomeScore AS Scored, AwayScore AS Against, HomeScore - AwayScore AS AggFROM tblFixturesWHERE (CompID = 1) AND (HomeScore IS NOT NULL)
the if statement needs to be:
IF HomeScore>AwayScore Then 3 is shown else 0 is shown.
Thanks
I have a sqldatasource, and on the selectcommand I'm trying to use a case statement with a subselect. The case statement works fine without the subselect, but I'm trouble getting it to work with the case statement. Could you help me with the syntax? ThanksSelectCommand="
SELECT DISTINCT RecipeID, Title
FROM [Recipes]
WHERE
(CASE WHEN @Type='Appetizer' THEN Appetizer
WHEN @Type='Pies' THEN
(Select Distinct RecipeID, Title From Recipes
WHERE Title like '%Pie%')
WHEN @Type='Beverages' THEN Beverage
WHEN @Type='Dessert' THEN Dessert
WHEN @Type='Kids' THEN Kids
WHEN @Type='Side' THEN Side
WHEN @Type='Soup' THEN Salad
WHEN @Type='Main' THEN Main
WHEN @Type='Breakfast' THEN Breakfast
END) = 1"
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
Hi,
I need to UPDATE the IP Address of a newly created user into a table (the value is currently set to default - " Not Available"), and I really dont know the syntax required to do this. So far I've derived all the variables needed using the following code:
protected void ContinueButton_Click(object sender, EventArgs e)
{
//Get the ip address and put it into the customer table - (the instance of this user now exists)
MembershipUser _membershipUser = Membership.GetUser();
Guid UserId = (Guid)_membershipUser.ProviderUserKey;<--------------------------------------------------------------I can see the UserId here if I pause the prog
SqlDataSource customerDataSource = new SqlDataSource();
customerDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString();
customerDataSource.UpdateParameters.Add("IPAddress", Request.UserHostAddress.ToString());<---------------------------------------I can see the IPAddress here
customerDataSource.UpdateCommandType = SqlDataSourceCommandType.Text;
what next
I've not got a clue as to what to write next. There is a try / catch statement after this using :
rowsAffected = customerDataSource.Update();
which remains at 0 no matter what I try.
Any help greatly appreciated.
I would like to use the value returned from my SqlDataSource SELECT method, in the INSERT method for the same SqlDataSource.
Any ideas how this is done?
(Newbie). I'm trying to: 1) check if the SELECT command has returned any records, and 2) put a msg box on the screen if there are no records returned from the SELECT query. The type of code I'm heading towards is: (but it's wrong). Thank you in advance for your C# code suggestion.
protected void SqlDataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e)
{if (SqlDataSource1.SelectParameters.Contains is "") then
MessageBox.show ("There are no records available") ;
}
I'm sure that is really simple, but how do I pass a parameter with multiple value to a SQLdatasource?
ex: SELECT field1 from tblTableA where idTableA IN ( @Param1)
Let's say I want to pass 1,2,3,4 as Param1 (SELECT field1 from tblTableA where idTableA IN ( 1,2,3,4))
How I am supposed tu use the .SelectParameters.Add() to pass a list of integers instead of a single value??
Thanks in advance.
I am using <asp:SqlDataSource ID and for the Select Command, the following, where the WHERE clause ... for an exact match (=) works correctly:
SelectCommand="SELECT [PatientID], [MedRecord] , [Accession], [FirstName], [LastName], [Address1] FROM [ClinicalPatient] WHERE (LastName = @LastName) ORDER BY [LastName]DESC">
I would like to do a "LIKE" search where the LastName Parameter is matched using "LIKE". In this situation how would the syntax be written.... I tried:
LastName LIKE '%" & LastName & "%'"
But I get an error???? Any suggestions, please...
Thanks !!
I have a SqlDataSource object that is bound to a GridView control. I have configured the SqlDataSource with a default select command. Under certain values of query strings on the URL for this page (Default.aspx), I want to change the select command. So I put the statements in the Page_Load method for Default.aspx to define SqlDataSource1.SelectCommand. The changed SelectCommand works fine for the first page of GridView data and shows 5 GridView pages, but if I switch to one of the other pages, it seems to revert to the default SelectCommand (which generates 19 GridView pages). I assume I should put my code to change the SelectCommand somewhere else. Can someone help me with where to put it? Thanks!
View 1 Replies View RelatedIs it possible to use a WHERE-IN statement with a SqlDataSource control. For instance:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>"
SelectCommand="SELECT [Id], [Name], [Phone] FROM [Table1] WHERE ([Id] IN @Id)">
<SelectParameters>
<asp:Parameter DefaultValue="( 1, 3, 5, 7, 11 )" Name="Id" Type="Int32" />
</SelectParameters></asp:SqlDataSource>
I'm hoping the gridview would then display a table with rows for records 1,3,5,7,11. Thanks for any help...
hiplz can any one tellHow should i use select method of SqlDatasourceplz show little code toothanks
View 1 Replies View RelatedPLEASE PLEASE PLEASE......
I did not get a single response for the last 6 hours... And during this time I was searching and trying to understand the problem but I am really stuck. If this is the wrong forum to ask this question, please redirect me. Really begging for replies...[:'(]
If I use the custom SQL statements in SqlDataSource, the application runs fine within the development environment (VS2005) but errors out if I publish the web site and access outside of the environment. In order to find-out the problem, I made the following test:
I created a select statement in one SqlDataSource to fill-in a GridView. I used the exact same statement to create a stored procedure and used that SP in second SqlDataSource and I fill a second GridView. When I debug or run the application, both grids are filled OK and everything works fine. However, when I publish the web site and try to do same only the stored procedure works fine and when I try to fill the grid using the built-in SQL, the page gives error. The error mesage is as follows when I use the address 'localhost':
Server Error in '/' Application.
The SELECT permission was denied on the object 'Contacts', database 'Homer', schema 'dbo'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The SELECT permission was denied on the object 'Contacts', database 'Homer', schema 'dbo'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): The SELECT permission was denied on the object 'Contacts', database 'Homer', schema 'dbo'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +859322.......da da da .......
If I access the page using the IP address the message chages to below but it is not the issue, I just give it if it helps to find the problem:
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
My SqlDataSource s are like this: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:HomerConnectionString %>"
SelectCommand="TestRemoteAccess" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="TextBox1" Name="Param1" PropertyName="Text" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:HomerConnectionString %>"
SelectCommand="SELECT FirstName, LastName, Business FROM Contacts WHERE (ContactID = @Param1)">
<SelectParameters>
<asp:ControlParameter ControlID="TextBox2" Name="Param1" PropertyName="Text" />
</SelectParameters>
</asp:SqlDataSource>
Environment: SQL Server 2005, VS2005, Vista
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Thanks in advance....
Let me simplify what I'm trying to do....
Basically, I want to run the following query by using SqlDataSource.
SELECT data FROM table WHERE row in ('one', 'two', 'three')
Simple enough....
So, here's my code.....which obviously doesn't work properly.
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnStr %>" SelectCommand="SELECT data FROM table WHERE row in (@username)">
<SelectParameters><asp:ControlParameter ControlID="TextBox1" Name="username" PropertyName="Text" Type="String" /></SelectParameters>
</asp:SqlDataSource>
<asp:Label ID="TextBox1" runat="server" Text="'one', 'two', 'three'" Width="125px" Visible="True"></asp:Label>
Is my SelectCommand correct? Thanks.
My compiler says that the line in bold below is illegal. The error msg I'm getting is: No overload for method 'select' takes '0' arguments. How can I correct this error and execute a SELECT?
protected void Button1_Click(object sender, EventArgs e)
{
SqlDataSource2.Select ();
}
protected void SqlDataSource2_Selected(object sender, SqlDataSourceStatusEventArgs e)
{string strReadyFirstName = e.Command.Parameters["@FirstName"].Value.ToString();string strReadyLastName = e.Command.Parameters["@LastName"].Value.ToString();
}
<asp:SqlDataSource ID="SqlDataSource2" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [User_ID], [User_Name], [FirstName], [LastName], [Company_Name], [Department_Name] FROM [CompanyDepartment] WHERE ([User_Name] = @User_Name)" OnSelected="SqlDataSource2_Selected">
<selectparameters>
<asp:sessionparameter DefaultValue="TheirUserName" Name="User_Name" SessionField="TheirUserName" Type="String" />
</selectparameters>
</asp:SqlDataSource>
I have a GridView (that uses SqlDataSource1) and a Dropdownlist. Depending upon the value selected on the DropDownList I need to select different stored procedures for the gridview. The problem is that I can do it without taking SqlDataSource1 by using DataSet or DataTable. But, I need to Use SQLDataSource1 for easy way of Header SORTING. So, is there any way to change the SQLDatasource1.SELECT Command dynamically. So that, I can use different queries for the Single DataGrid. I have attached the sample code of the SqlDataSource1 I'm using. I need to change the Command i.e. SelectCommand="usp_reports_shortages" to "usp_reports_shortagesbyID" and "usp_reports_shortagesbyDate" depending on the value selected in the dropdownlist. So, is there any way to do this????<asp:SqlDataSource ID="SqlDataSource1"
runat="server"
ConnectionString="<%$
ConnectionStrings:TESTDrivercommunication %>"
SelectCommand="usp_reports_shortages" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="lblDriver" Name="date1" PropertyName="Text" Type="DateTime" />
<asp:ControlParameter ControlID="lblTODate" Name="date2" PropertyName="Text" Type="DateTime" />
<asp:ControlParameter ControlID="DDlDriver" Name="driver" PropertyName="SelectedValue"
Type="Int32" />
<asp:SessionParameter Name="week" SessionField="s_week" Type="DateTime" />
</SelectParameters>
</asp:SqlDataSource>
I am using the SqlDataSource to access the dB from my page. Basically this is what I do with it ds.SelectParameters.Clear();
ds.SelectParameters("Id", TypeCode.Int32, id.ToString());
DataSourceSelectArguments dssa = new DataSourceSelectArguments();
dssa.MaximumRows = 1;
dssa.AddSupportedCapabilities(DataSourceCapabilities.Page);
DataView dv = (DataView)ds.Select(dssa);
if (dv.Count > 0)
{
// collect the information
string title = (string)dv[index].Row.ItemArray[0];
}
And the SelectCommand attribute of the SqlDataSource is set in design mode to "SELECT * from vw_Items ORDER BY Category".
So, since I am trying to retrieve just the item with the given Id I was expecting just one record but when I step through I see that the data view has a count of 9 (all records in the table) !!!
What am I doing wrong here? why can't it return just one? as per the select statement which after adding the parameter should be something like "SELECT * FROM vw_Items WHERE ID = 5 ORDER BY Category