Hey I've been trying to upload a sql express database to my webserver with out much success :( When I upload it I get permission problems so I think anyway I've been reading around and it looks like i'm stuck with having to let the server create the database file again Is there anyway i can upload this file to the webserver and get it working 100%?
I am running SqlExpress on a Vista machine as a server and accessing it from machines running XP. I could not connect with the Vista server until I turned off the firewall, despite creating exceptions for both the sqlexpress and sqlbrowser services in the firewall setup. Obviously, I don't want to run on a wireless network without a firewall for any length of time. What else to I need to enable in order to run with my firewall up? In SMSS, I could 'see' the Vista server on the network with the firewall up, but I could not 'see' the SERVERSQLEXPRESS service or connect to it .
I've been trying to find an answer to this to no avail. I'm not even sure if its possible. I like to do development at home in addition to work, like most of you do. Since it is my home computer, I like to play games, so I try to keep applications to a minimum. I would like to install sqlexpress on a virtual machine (which I have successfully done), and I can connect to it via Management Studio on my local machine (non-vm). Is there a way to set visual studio to use this connection as opposed to local host? I really do not want to load sqlexpress on my local machine and have yet another thing tying up system resources.
Hi all, I followed this excellent tutorial (from Microsoft) about creating and using a SQLExpress db table internal to your website: http://www.asp.net/learn/videos/video-08.aspx and the site I created works just fine - locally. When I publish to my web host provider I get this error: [SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] My web host provider supports .NET 2.0 but doesn't support MS SQL Server. But that should matter - right? Because I'm putting the db instance right in the website? I did a search and followed some of the advice: I went into the SQL Server Surface Area Config Mgr and set SQLExpress for local and remote connections and rebooted/republished. I also have SQL Server 2005 installed as a separate entity (if that makes a difference). I still get the above error. This is the connection string from the web.config: <connectionStrings><add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Customers.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings>And this is the call from the markup: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT * FROM [Customer]"></asp:SqlDataSource> Does any know the fix for this? Thanking you in advance Pat
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
I have created an installation application which will install the application with SQL Express and .NET Framework 2.0.
If i install this application in a Fresh system(i.e which is not having SQL Express), it is installing the application with new database instance successfully.
But if i try to install the same in a system which is already having SQL Express, throwing "Object reference exception" because it is not able to create the new database instance.
Because of numerous problems trying to get sqlexpress working, I uninstalled it with the intention of reinstalling (via Add or Remove Programs). However, now when I try to reinstall it, I get a message that the I am not making a changes so it won't let me install it.
I do have sql server 2005 developer's edition installed; is that the reason? and does that mean I cannot have both installed on the same machine?
Hi All,I've been struggling with this for hours...Could someone please advise me on how to convert my current File based SQL Server Express website to a Server based SQL Express one.Particularly interested in what I need to do in the SQL Express management tool, changes I need to make the projecvt itself and changes needed to get IIS to understand things have been changed.Thanks,Martin.
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
Fellow Devs, I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections. Any ideas why this might be happening? Is there some other configuration?
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
I am trying to add a linked server from a AMD x64 server (Windows 2003) with SQL Server 2005 64 bit to a Server running SQL 2000. These are not in the same domain.
I can create a linked server using the option "Be made using the login's current security context" but can not when trying to specify the security context, i.e. sa and the sa password. When I try I get the following message:
Msg 15185, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 98 There is no remote user 'sa' mapped to local user '(null)' from the remote server 'DTS_FSERVER'.
I have several other x64 server that I have no problem creating a linked server and specifying sa and the sa password.
The problem with using "the login's current security context" option is that I get an error when trying to run any Jobs against the linked server. The job fails withe the following error:
Executed as user: NT AUTHORITYSYSTEM. Access to the remote server is denied because no login-mapping exists. [SQLSTATE 42000] (Error 7416). The step failed.
I'm sure the two errors are related. Any ideas what is going on?
Hi I'm pretty new to all of this. I downloded a starter kit and am a bit confised as to SQLExpress. I have SQL Server already installed and just wondering what the option are. I am currently using Visual Web Developer Express Edition and in the config file data source is SQLExpress and can't go any further. I don't want to mess with my current setup so just want to get some sugestions first. Anyway hope this makes sense. Thanks GP
I have just created a website with membership just using the standard SqlExpress auto generated file Everything works fine until I upload it to webspace :( I get the following Error An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) I don't have SQL Server 2005 :(
if my SQl server/COnnection is "SQL EXPRESS"..Im using an Import name "Import System.SqlClient" on every web form that i have... as well as other SQl command name like "SQLConnection,SQLCommand etc..."is this the correct that im using all sqlcommand in my webform??? well sorry for this im just new..and one more thing..can i include Ado.net on it if my connection is "SQLEXPRESS" just i said? Thanks for the answer....
I am new to this forum . I am running through few problems for sqlserver account settings .
I) My registery key entry for MSSQLserver just has a client folder . 2) My sql server configuration manager just has sqlserver 2005 services , native client configuration and 2005 network configuration.
I can't see any server name or databases under it.
3)I normally work on EMS lite so I can see my ./SQLEXPRESS as server and databases under it and i can create logins etc ..I assigned db_owner role to one of my recent created database. but when I try to connect it says :
The user is not associated with sqlserver connection.
5) i have sqlserver express service running, vss and sql server browser running.
I googled and searched for the solution and it says the authentication mode should be turned to mix mode form win authentication.
But from where. Have i missed some installation .I am able to connect to my other database from EMS.
I am trying to write an application for a MSSQL database, using SQL Express,and Visual Studio (Express edition)I tried to connect to an existing database (named testing) but to no avail.Visual Studio claims the database does not exist.Any ideas?TIA--Q: What is the difference between a mathematician and a philosopher?A: The mathematician only needs paper, pencil, and a trash bin for hiswork - the philosopher can do without the trash bin...
Installation of SP2 in step "Feature Selection" shows SQLEXPRESS unchecked and can''t be edited/checked. I tried it many times on different servers with different OSes, etc
Does it mean that SP2 for Expres Edition should be downloaded and applieŠ² separately?
Hello,I am just getting reaquainted with programming and all. I work in GIS mapping and am having diffilculty using a ASP.net internet Map site and adding records to a needed database.I would like to be able to add records to a linked SQLExpress table when the user clicks on a map location. I adapted the following code snippet from an example that does what I would like only using an .mdb file.CODE: // create connection to database var connection; connection = Server.CreateObject("ADODB.Connection"); connection.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=OutdoorsExp;Data Source=NOLOGOSQLEXPRESS;"); status = "Can't access 'FishSQL' table."; // create recordset var recordset; recordset = Server.CreateObject("ADODB.Recordset"); recordset.CursorType = 1 recordset.LockType = 3; recordset.Open("dbo.FishTable", connection); status = "Can't append new record."; // append record for clicked location recordset.AddNew(); recordset.Fields("LongitudeI").Value = xco; recordset.Fields("LatitudeI").Value = yco; recordset.Update(); recordset.Close(); // release the .mdb file connection.Close();However, this does not add anything to the SQLEx table. What am I missing? I am thinking that it might have something to with the primary key.I had a table with way more columns then just lat/longs (as above) but only coded it to add data to the latitude and longitude fields. Nothing got added of course. Would have to add data to every field that doesnt allow nulls.How do I generate a random, unique ID for a primary key on the fly and for example add it to the appropriate column.Thanks you in adavnce for any insights.
To be as brief as possible:I had Visual Studio 2005 installed with SQLExpress 2005. worked reallll good :) I needed to convert an excell spreadsheet to SQL, so I migrated it to Access. Then the upsizing wizard would not/could not create an sql table with the data. Just would not take the data when the table was created. Argh.FINALLY figured out that the SQLexpress 2005 doesn't come with import/export.So I uninstalled the sqlexpress and installed SQL 2000 - Developer. Veeola, able to convert and created the table I needed.Now Visual Studio 2005 won't let me touch the sql file, says it requires sql server express 2005.My ISP does not support SQL 2005 yet. Is there anyway to get Visual Studio 2005 to work with SQL 2000 (only?)If I install SQLExpress over again, will it create problems when I go to publish my website, and more importantly right now, will anything bad happen when I reinstall sql express, or do I need to uninstall SQL 2000 first? Thanks...
hi:I set up a DSN via Adim tools, then I specify the connection string as "DSN=UserAppSample;Trusted_Connection=True".When I run my aspx page, it says: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "UserAppSample" requested by the login. The login failed. It asks for login, but I use windows authentication. So what is wrong with this? :(
** For those 20 users (or fewer) who've read http://forums.asp.net/thread/1692306.aspx, I'm sorry that I ask the same question.Like I said above, what is the limitation of SQLEXPRESS, in terms of performance and scability?I'm creating a new webboard application that will replace the old one. I intend it to handle 200 concurrent users + 70000 records (9 years of data)The current system use Microsoft Access, which is reaching it's limit in performance and size. I took a look in the SQL Server product information page : http://www.microsoft.com/sql/prodinfo/features/compare-features.mspx.It didn't tell me what I want, like how many connections it can handle, for example.If there are limitations that might cause my application to not reach the required specification (above), I may need to switch to MySQL. I've no intention buying a licensed SQL Server 2005.Thanks in advance.PS: Why there're so few users viewing my posts? Anyone know a more active forum that may help me?
i'm using sqlexpress edition for my application and i'm wondering whether i will be able to execute the below sql statement use masteralter database <dbname> SET ENABLE_BROKER when i execute the above two lines its executing from last 30+ minutes... i'm wondering will that support in sqlexpress edition ? also, in order to use sqldependency do i have to enable broker service? thanks.
Ok it seems to me that if you use the ms recommended code to connect your apps using the app_data folder etc, that the dbs never show up in the SQLExpress manager.So I can't back them up like I can databases I connect to SQLExpress the 'old fashioned way'. Only 2 out of 6 dbs are visible in SQLExpress manager.What is the proper way to do this?Thanks,Jamey
1. Is there a white paper on how to upgrade an SQLExpress DataFile to a SQLServer attached database? 2. More importantly: Is there a way to upgrade a Beta 2 SqlExpress database to a RTM version? This lack of compatibility between beta 2 and RTM is killing me. Are their any resources for this transformation? Would be great!
As of right now I have two networked machines. I have a sql database on one that I have no problem connecting to, but I cannot connect to the database from the second machine.
From the second machine, I've come up with this connection string after all my research...
"server=[MACHINE_NAME]SQLExpress;databse=[NAME];User ID = sa;Password=[PASS]"
I keep getting a cannot connect to database error.
I know this isn't exactly SQL help, but I alwasy get great help here and thought someone might know why I'm having problems. I'm trying to map to a drive where I have a SQLExpress database on another computer within a workgroup. This is the cmd line I'm using...
NET USE * \XPPRO1SQLExpress /USER:Admin /SAVECRED /PERSISTENT: YES
I'm thinking the problem is with the * (which names the new drive with the next available letter), or that I have to use a password. Everything I've found says nothing about specifying a password though.
The error message I get says "A command was used with conflicting switches."
I just reinstalled SQLExpress and all the dbs that I created are no more linked. The files still exist in the folder where the current version stores dbs (...Microsoft SQL ServerMSSQL.1MSSQLData) but they are not "linked" (don't know the right term).
Is there anybody who could help me how to "relink" these dbs to the actual .SQLExpress instance?
Hi friends I insalled Visual Studio 2005 standard edi on XP machine. as you all know it also installs sqlexpress. i want to uninstall this sqlexpress as i also have sql server 2005 standard edition on my machine.
but i dont see any option to uninstall in add/remove programs or in start menu for sqlexpress. any ideas on this ? Thanks for your help.
I made a big mistake and deleted this program and now I cannot reinstall it. I get error messages stating that an instance is already on my machine and I need a unique name to restart install. I also get messages that say to install from the command line but I cannot get there the only access I have is error reporting. Is there any way I can make a FREASH install of this program????
