I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies View RelatedHi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
We have a maintenance plan that runs every 15 minutes to backup a transaction log. It fails intermittantly with the message:
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
This is the only error message to be found in any of the logs. I've checked event viewer, the SQL error logs, exception log, maintenance plan log, sysdbmainplan_history table in msdb, but can't find any extra information. I checked the MSDN for info on this error and this did not add any extra light on the problem.
Does anyone have any ideas on how to de-bug this error?
regards
Stuart Ainsley
I am having a problem with a Job Step that is failing. The actual Step runs
a Stored Procedure, but the Job keeps failing and returning the following
error
"sqlmaint.exe failed. [SQLSTATE 42000](Error 22029). The step failed."
Does anyone know what this means ?
Thanks.
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
Hi All
I have job with three steps
Step1.Alter database <xxxxx> set recovery simple
Step2 DTSrun /....../........
Step3.Alter database <xxxxx> set recovery full
GO
Use XXXXX
GO
dbcc shrinkfile (XXXXX_Log, 200)
Up to yester day my Job ran fine today job got failed at Step1
Executed as user: CLUSTURsa_admin. The log file for database '<xxxxx>' is full. Back up the transaction log for the database to free up some log space. [SQLSTATE 42000] (Error 9002) Could not write a CHECKPOINT record in database ID 3 because the log is out of space. [SQLSTATE 01000] (Error 3619). The step failed
some body help me what to do now,
changing recovery model also needs space?(Simple to Full/Full to Simple)
I installed a new SQL Server and implementd a maintenance plan for user databases. In doing so, all the jobs seem to work except the Integrity checks. These jobs fail with the following error:
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Has anyone seen this? Or has an idea how to fix it?
Thanks in advance.
way0utwest
during maintenance plan i get following error :
Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 5070: [Microsoft][ODBC SQL Server Driver][SQL Server]Database state cannot be changed while other users are using the database 'AJAX'
[Microsoft][ODBC SQL Server Driver][SQL Server]ALTER DATABASE statement failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]sp_dboption command failed.
[8] Database AJAX: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 7919: [Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed. Database needs to be in single user mode.
Hello,
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I already tested the suggested:
execute as login='adsme' and I get the same error on both (my local installations and production)
appreciate your help
Hi guys i used maintanance wizards to schedule, transactional log backups it gave me this error SQLMAINT.EXE Process exit code 1.
I went to job history and i get this error code SQL STATE 42000 error 22029.
if any one has hints on how to deal with this i will appreciate
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
Any and all help is greatly appreciated...
Anthony
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
Hi,
This is my first posting and actually I have big problem which I need to resolve immediately:
I have a 38 GB Database on my SQL Server which I want to full-backup. Until now backup was created on the same volume where the database resides. But now the volume is out of disk space. So what we did is that we connected an external USB disk drive with 500 GB to the SQL Server and try to backup there.
But our first and all consecutive backup attemps failed with error SQL-DMO (ODBC SQLState: 42000). It's working fine the first few minutes as we can see that the backup file is continously growing. But then it abruptly aborts with above error message.
Can anyone figure out why ? Any help is appreciated.
Thx
Overlord1970
Good morning all. I need some help with a stored proc that is driving me up a wall. It's probably something stairing me right in the face but I can't see it!
I keep getting the following error on the procedure that I'm working on:
SQL-DMO (ODBC SQLSTATE: 42000)
ERROR 156: Incorrect syntax near keyword 'AS'
Must declare the variable '@signid'
Must declare the variable '@signid'
Here's the code:
CREATE PROCEDURE [dbo].[ws_savesignature2db]
@xml as text='',
@image as image='',
@imageformat as varchar(20)='',
@imagename as varchar(40)='',
@imagesize as int=0,
AS
insert into signaturetable
([image], imageformat, imagename, imagesize)
values
(@image, @imageformat,@imagename,@imagesize)
/*
if your XML field datatype is Text or nTEXT, use the code below in Sql Server 2000.
If you use Sql Server 2005, you can use varchar(max) or nvarchar(max) which will be
much easier and you do not need the code.
*/
select @signid = @@IDENTITY
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR([xml])
FROM ws_signature
WHERE signid= @signid
if @ptrval is not null
WRITETEXT ws_signature.xml @ptrval @xml
GO
Any help you can give would be a life saver!!!!
Thanks in advance.
Jim
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
Can anyone tell me how to troubleshoot the following error:
'sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.'
Thank you,
Ryan
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
I get this error message when trying to execute one of the jobs created by the maintenance plan wizard.
Any ideas what caused this error?
I have a maintenance plan on a client's site, there's only one databasein the plan and it's set to backup db and log, this job failsconsistently. The one step in the job contains this line:EXECUTE master.dbo.xp_sqlmaint N'-PlanID392B2334-6800-4655-A6C7-5414D9072505 -WriteHistory -VrfyBackup-BkUpMedia DISK -BkUpDB "C:Program FilesMicrosoft SQLServerMSSQLBACKUPDailyBackups" -DelBkUps 4WEEKS -BkExt "BAK"'Which fails if run in QA with the message:Server: Msg 22029, Level 16, State 1, Line 0sqlmaint.exe failed.I've searched for this error and cannot find anything to help.There's no "-S" in the path, it writes absolutely no history on theplan. I set the plan to write history in the log directory on theserver, it wrote nothing to that directory.The database doesn't get backed up but is able to be backed up manuallyto the path specified in the plan. I also have a separate job with aSQL backup statement in it that works OK so SQLAgent is working.
View 9 Replies View Related
I am using SQL 2000,everyday we are running database backup plan but it shows a error like "Executed as user: NT AUTHORITYSYSTEM. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
Our database recovery model is also in Full mode.Burt i don't know why its happening with us,before that database maintenance plan was working fine but for last 2 months its not working.
thanks,
-Amit
Hi! I have a SQL 7.0. The backups created by maintenance plan workedvery well before someone shut down the server to do some servermaintenance. After restart the server, the backup job is not workingany more. All the backups created by maintenance plan are not working,including the newely created one. The message is "Server: Msg 22029, Level 16, State 1, Line 0sqlmaint.exe failed."Please help me out!! Thanks.Saiyou
View 1 Replies View RelatedI have SQL 2000 installed in my windows 2003 server with mixed mode authentication. When I login to the server and open the SQL server manager under my windows name everything works. And if I try to create an odbc connection from one of the client pc's or from the server itself using windows authentication still everything works. Now I opened the SQL enterprise manager and in the Security section, there is a user group called BUILTINAdministrators, I was asked to deny access to this group in SQL. So I did that and added my windows login name in the security -> Login section. Now still if I try to open the enterprise manager and and login to sql under my windows login name it works. But if I try to create an odbc connection to the sql server either from the server itself or from the client work station I get the following error:
connection failed:SQLstate: '28000'SQL Server Error: 18456[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'PRODpchelin'
If I go to the security -> Login and enable BUILTAministrators group, everything works. But I would like to know how to disable that group and add my own windows group or login id in SQL server and connect using ODBC.
Your valuable feedback is greatly appriciated.
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
hi
I have a script which worked fine in SQL SERVER 2000. We have now upgraded to SQL SERVER 2005 (SP1). When I run the script from Query Analyser it works fine. But when I schedule the same script to run as a job, it fails and i get the following error:
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
Now, there is no problem with the syntax.
What could be the problem?? I have been searching for a logical answer on the Internet and although other people seem to have encontered a similar problem, I have yet to find an answer.
Million thanks if u can help.
Thanks
John
Hi,I have a Scheduled Job on my PC that runs against a Linked Server. Ihave scheduled the Job to run when SQL Server Agent starts and I haveconfigured my SQL Server and SQL Server Agent to start when the OSstarts. The connection to the Linked Server is via my Broadbandinternet connection.I have some suspicions as to the cause and hence a possible solutionbut I want to run my ideas past anyone else who may have experiencedthe same.1. Should I have my DSL modem turned on before I start the PC so thatthe Network connection is available when the OS starts?2. Are the Network connections only made available after you havelogged in and hence not established quickly enough before SQL Serverand SQL Server Agent are started?Yesterday, when I rebooted the PC with the modem still on theScheduled Job ran without failure but this morning again it failed. Myusual routine is to turn on the modem just before I login.If No. 2 is the case then maybe I just need to set the "Retryattempts" parameter.Thanks,Michael HolbertonHospedaje Los Jardines & Sacred Valley Mountain Bike ToursCusco Database Development and Cycling Serviceshttp://www.machawasi.com/http://machawasi.blogspot.com/http://databaseservices.blogspot.comhttp://serviciosdeciclismodelperu.googlepages.com
View 5 Replies View RelatedProblem Restoring Backup database in MSSQL 2000.I made a backup of one of my databases from one server and now I'm trying to restore to the production server (Clustering) using Enterprise Manager. I remote the server - launched Enterprise Manager and I select the restore from disk and I give the full path of a local drive in the server where the backup is located - when I clicked "ok" it first tells me: "Unable to verify the existence of the backup file location. Do you want to use the backup file location anyway?" If I answer "Yes" and "OK" it presents a error msg: "Cannpt open backup device 'c:.......bak. Restore database terminating - Microsoft SQL-DMO(ODBC SQLSTATE 42000). I have moved this backup around and I still get the same msg. Can anybody help - need assistance ASAP - thank you
View 4 Replies View RelatedDear all,
I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ?
Thanks in advance.
Best regards,
Hery
I have a biztalk db server where I have few job steps. The log bkp job steps which the below error but when I go to the location of backup/checking the msdb backupset table I can see the backup file.
[SQLSTATE 01000] (Error 4035) BACKUP LOG successfully processed 1 pages in 0.010 seconds (0.146 MB/sec). [SQLSTATE 01000] (Error 3014)
Many a times see the below error in SQL Error log.
Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]
Is this something to do here?
Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?
CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS
Hi friends,
please help me with my urgent needs.
I have created a job. This job contains 6 steps.
All steps are sql querries.
In step no:3 i have an if condition in the script.
When the condition becomes true i have to run the script.
That is ok.
But the problem is when the condition becomes falls i have
to go to the step no 6 and at the same time the status
of step no:3 should be like "failed".
can you help me please
Please this is an urgent reqirement.
Thank you.
i have a sql server job scheduled to run daily twice.the job is running fine , but once or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'. The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'. The step failed."
View 2 Replies View Related I am getting this error message "Replication-agentclassname: agent F1TESTSQLSERVER20-ELC-ELC_Pub-F1TESTSQLExpress-39 failed. Executed as user: . A required privilege is not held by the client. The step failed." All the users replication agents have failed and I am looking on how to resolve this serious error. Where do I start? I am using merge replication.
Thanks!
SAM