Hello, is it possible to have both sql server 2000 and sql server express 2005 installed at the same box?
I currently have sql2000 installed its used for an application. But I want to install visual studio 2005 and with this sql server express 2005 also is being installed ( if you want to) now I wonder if this is possible, that is is it possible to both run sql server 2000 and sql server express at the same time on the same box?
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
Apparently you cannot go backwards. Once 2005 Express is installed, even removing it does not allow you to setup MSDE 2000 again. So there is no "trying it out" option.
Unfortunately, our software does not use 2005 Express. I tried it out, and now have a useless testing workstation that can't have MSDE 2000 installed again.
Any ideas on how to break the chain here are welcome.
My upgrade of SQL Server 2000 to SQL Server 2005 is being blocked as follows: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding FTCATALOGPATH DEPRECATEDSP FTCATALOGNAMERESTRICTION FTNONPERSISTEDCOMPCOL
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________ System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------ Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) ____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
hi guys, i am having a truble in accesing the server 2005 express edition from my client systems in server 2003 domain network. i get server not accessible. whereas my domain is working perfectly. i really tried alot and i have enable tcpip and named pipes and i am still getting errors while accessing. i have also created user reights for the domain users to access sql server. still i couldn't able to access it.
please guide me to over come this issue. I'm dying.My project is similar to SAP concept project and i am doing it in a production industry.so each department as to access the data from the server to update their daily production and activity.
Hi, I'm using Visual Web Developer Express and Management Studio Express, and my web site is on a shared web hostΒ΄, running SqlServer2000. I'm looking for software that enables me to monitor the server, but is it possible? The only apps I've found (and downloaded and installed and unistalled) so far need administrative rights to the server so they won't work on a shared web host. All help would be welcome! Thanks in advance, Pettrer
I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
Currently on my development machine i have SQL Express 2005 running.
On the production server, they have SQL 2000. So I need to get one of my databases from this server to the other one. From my understanding you can't export from 2005 to 2000 because of the drastic change.
What is the easiest way for me to do this?
create the tables manually and export the data in CSV and import it that way?
whenever i modified the connection of my current database...I'll always got an error,when asking for "server name"..it says [DBNETLIB...etc]Named Pipes etc error..my current database was SQLEXPRESS and i want to change it as an SQL OLEDB,2000,2005.. but as i said il always got an error..sometimes it says "SQL server does not exit..ODBC" etc...when im entering the "server name"..so i could only used Access or SQLEXPRESS server database.. what should i do with the error?? thanks for helping again..
Hi, I"m trying to export a databse from my express 2005 to 2000 and I tried using managment studio and doesn't seem to work. Can anybody give me some tips or links that teach me how to do that? I googled around , so far, havne't found a good solution yet. Thanks
Recently I decided to start using DotNetNuke, which uses an SQL Server database. My webhoster offers SQL Server 2000, and I was able to install and run DNN successfully there. However, I wish to have a local copy of DNN on my PC with the same contents as is on the web. It means that I need either to convert SQL Server 2000 database to my local SQL Server 2005 Express database, or vice versa.
Although I programmed in (Visual) FoxPro for many years, I am new to SQL Server and I am overwhelmed by the vast number of new terms. Can anyone tell me in simple English, how to perform the above mentioned conversions? My webhoster allows me to backup the SQL Server 2000 database in an *.sql file, but how shall I convert this file into an SQL Server 2005 Express *.mdf file?
My question might be a little bit unusual, but is it possible to upgrade SQL 2005 Express (the free version of SQL) to SQL 2000 Server without any loss of functionality?
Where do I have to pay attention to when doing this?
I have a database backup from Server Express 2005 that I want to restore to SQL Server 2000. I keep getting an error message saying it was created a newer version and wont work. Is there a workaround to this.
I want to replicate data from sql server 2000 to a sql server express 2005 box.
I can dts data across..but I want to be able to set up push replication from the Sql Server 2000 box, but the option to push the data to the Sql Express server in the GUI does not come up only Sql Server 2000 boxes are listed. Initially I will be using Snapshot replication but would like to eventually move on to transactional rep if only I can get it to push the data across.
Does anyone know how to acheive this thanks for any help Sammy.
The Environment: I have an old Windows 2000 BackOffice server (Retail but with no media) that hosts a small database (<50mb) that is hosted on the local SQL Server 2000 installation. The network has 8 PCs that connect to the database via ODBC connections. I just purchased a new server running Windows Server 2003 Standard Edition (OEM).
What Im Trying to Accomplish: I want to decommission the old 2000 BackOffice server and move the database to the new 2003 Standard server. Im trying to do this on the cheap, so I really want to avoid spending thousands on a new SQL server license.
Things Im Considering: 1) Migrating the database from SQL 2000 Standard to SQL 2005 Express 2) Moving the database from SQL 2000 Standard to MS Access 3) Purchasing SQL Server 2005 licenses and upgrading 4) Purchasing SQL 2000 Server licenses
The options are pretty much listed in my order of preference. Id like to move from SQL 2000 Server to SQL 2005 Express, but I havent really found a lot of material on the subject since people customarily go the other way.
Any advice or alternative recommendations would be much appreciated!
Hello, Sorry for my question, I know, that there were several topics about sql 2000 vs SQL 2005, I read all them but unfortunately I haven't got the correct answer. I must install my intranet application that uses asp.net 2.0 and SQL 2005 Express to a Windows 2003 server with SQL 2000. It is possible to install SQL 2005 Express beside the 2000 server? It is very important, because I have no possibility to test and that Win2003 server there are a few programs that use SQL 2000. What will happen with the 2000 databases and their programs if I install the 2005 Express to the server? They will work fine with 2000 and my application will work with 2005? Or instead it should I configure my application to use 2000 capable connentionstrings?
I was wondering whether it is possible to query linked servers in SQL Server Management Studio Express 2005 if those servers linked to are SQL Server 2000 machines?
I have added some linked servers to express and queried them, however the login timeout is expiring. I thought it might be because of an incompatability.
Can I use SQL 2005 Management Studio Express to manage my SQL Server 2000 dbs? Currently I have SQL Enterprise Manager Version 8.0 installed and was thinking I'd like to install and use SQL 2005 Management Studio Express instead. This doable?
Can anybody help? I have a Windows XP and 2003 server; we have installed SQL 2005 Express on it but have an application that installs MSDE 2000 to connect to an application. After the MSDE 2000 is installed we can no longer see the instance across the network. If we uninstall the SQL 2005 express version we can see the Instance in MSDE 2000. Is there any compatibility issue with install MSDE 2000 after SQL 2005 has been installed. Many Thanks in advance David
We do our development in SQLServer 2005. We want to backup and restore our database into the client's side who use SQLServer 2000. Backup and restore cannot work. We try to script the database in 2005 and change the option script to 2000. This fails also. What other option I can use?
I am very (almost two days) new to SQL Server Express (in fact SQL Server). In my old applications I am using VB.Net 2005 Express with MS Access database and now I wants to go for SQL Server Express.
One thing I am unable to find till now is : if SQLServer Express is installed on my Server machine (say ServerPC) with attached database (say MyDB.mdf), how I can access it through ADO.Net 2.0 from client machine. (using VB.Net Express)
Thanks and hope you will encourge me to use SQL Server .
Ok from what I understand, sqlserver 2005 is FREE, and it is not limited by the number of concurrent connections etc etc.
So this means you can put sqlserver 2005 express on a dedicated server, and it can pretty much handle all the load you can throw right? (except if your say running myspace hehe)
I would really like to be using SQLServer Express 2005 for some desktop database applications and replace MSDE. However, I am using VS.NET 2003 and so far I have not been able to discover if that combination will work.
I have followed the link to download SP1 of SQLServer 2005 Express Edition, but, on that page nowhere it is mentioned that downloads offered are of SP1, it simply says that SQLServer 2005 Express edition.
What is the correct link and am I really on the correct page of SP1 ?
