Ssrs Report Fields Overflowing..
Sep 28, 2007
hi friends
we are looking at reports which have to be dynamically populated .. the problems faced are that the fields are so many that they dont fit horizontally in the same page ...so i have to make sure that only the fields permitted as per the report layout are shown on that page and the rest must be shown on the succeeding page..
what seems to be the solution ( maybe wrong ) that the somehow the way the report engine's methods can be overwritten
but how?
any other suggestions that are more straightforward are most welcome
View 1 Replies
ADVERTISEMENT
Jul 20, 2005
If I declare a local variable in a cursors query and append values toit with successiuve concatenations, how come SQL7 does not report anerror if I concatenate a value to it that will overflow it's declaredsize? Specifically,DELCARE @t varchar(5)....SET @t = '12345'....SET @t = @t + '1 more'The concatenation of '1 more' does not signal an error. In fact, youcan do any number of successive concatenations and none of them willreport an error.Shouldn't SQL7 be reporting an error?
View 3 Replies
View Related
Nov 30, 2006
I have a weird error that just started showing up. This process has run many times before and just today it started erroring.
The error I get is:
There was an error with input column "dtInsertTime" (242) on input "OLE DB Destination Input" (146). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
The weird thing is that column is added to the data flow via a derived column just before the destination and its set to GETDATE(). The destination column for that field is datetime not null with the same name. I have litterally hundreds of packages that do the same thing (add a column set to getdate() of type dbtimestamp going into sql 2005 column with datetime) and have never run into this. Its frustrating.. the job will run for a half hour inserting records just fine and then BAM fails.
I'm completely out of ideas... Most destinations I don't use the fast load option so I am running it right now with that off to see if that makes a difference (other than making it slower). Previously I had it set to "keep nulls" and "table lock" but not "check integrity".
Edit: I'll have to abandon my test without fast load... my load times went from < 30 second to 2-3 minutes per set of records.
View 9 Replies
View Related
Nov 30, 2007
We're experiencing the same issue as a few others that have posted on this forum (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=971931&SiteID=1) but I haven't seen any resolutions. The error is: There was an error with input column "MODIFY_DT" (4598) on input "OLE DB Destination Input" (4357). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
The package is executed from a SQL Server Agent job. After the failure, we can run the exact same job without changing any data in the source or destination tables and the package will work. Within the Advanced Editor the data type is consitent database timestamp [DT_DBTIMESTAMP] for all data flow components and the data type is consistent within the source and destination tables as well.
Any ideas????
Many thanks in advance!
View 11 Replies
View Related
Dec 4, 2007
Hi.
I am currently working With SSRS . I have created a Store Procedure To show Data from different table in my Database,I have Used a temp table with #xxx Name,when i am creating DataSet for this Store procedure . but its not Showing the Fields of Store Procedure, but when i create other Store procedure without temp table with #xxx then its showing the fields in Data Set.
What Could be the possible Reason,
Thanks
View 8 Replies
View Related
Sep 10, 2007
Hi everyone:
I am developing an SSRS report over a cube. When I drag and drop fields, it works fine. it runs in a few minutes. I am selectinng only from a single day - about 10,000 records. However, when I add some calculated fields it takes much longer. It's been running for 7 hours. The calculated fields fields are pretty simple. Some are selection of one field over another depending upon the value of a 3rd field. One is two fields multiplied together. One is a constant times a field. Something's obviously wrong here. Anybody seen this or have a solution?
Barry
View 3 Replies
View Related
May 21, 2015
I have a SP like this:
ALTER PROCEDURE [dbo].[ReportGateWay]
(
@ISO bigint= 0,
@Gateway bigint= 0
)
AS
BEGIN
DECLARE @SQL nvarchar(max)
[Code] ....
I need to invoke this in SSRS. The problem is that when on creating dataset for this, I get an error which read:
You must have atleast one field for your dataset
What can be done in this case?
Here is the SQL Fiddle: [URL] ....
View 16 Replies
View Related
Jun 15, 2015
Currently i am setting up a report. The data source comes from pre-defined custom datasets where i've pre-entered the parameters for both Month and Year.
I already have one table up and working, but now i need a new table below it with a % column for each month so it gives visibility for the trend in recent months. As the interactive parameters are already in place; when i try to create the table it comes through with the specific month that the parameters are set too, and change when the parameters are altered.Is there a way to ignore the parameters for this table; or get around it?
View 2 Replies
View Related
Oct 9, 2015
I have done the following and a domain user would not access report created a login to the SQL server to the user (this SQL Server is where data source DB is)went to site setting in Report Manager and made this use a system userright clicked on report folder and made this user in the browser roleeven checked that in the report in question, the user is already in the browser role Still the user would not access the report! "User .......... does not have required permission" is the error message I am getting.
View 6 Replies
View Related
Jul 5, 2012
I have written a report visual studio. The report has 10 multi-value parameters that pull data from their individual data sets within the reports. When running the report from within Visual Studio it renders fine. There are no errors reported, only a warning related to a pathname I have use to retrieve image data and display on the report.Deployment of the report is error free.When I view the report I briefly get the "Loading" splash window, but then nothing. None of the headers or static text is displayed. The results window is blank.
The report defaults all the parameter values. In trying to debug the issue I have found by reducing the number of parameter values the report will render. Once I have all the values added, the report does nothing.Below is the query being used for the report. The where clause in the query shows the parameters being used and the syntax.We are running on Windows Server 2008 R2 and SQL Server 2008 R2.
Ralph
SELECT RTRIM(a.ITEMNMBR) AS Style, RTRIM(a.ITEMDESC) AS Description, a.ITMSHNAM AS UPC, c.LOCNCODE AS Store, d.LISTPRCE AS ListPrice, a.CURRCOST AS Cost,
a.USCATVLS_1 AS [Main Category], a.USCATVLS_2 AS Market, a.USCATVLS_3 AS [Alternate Retail], a.USCATVLS_4 AS Country, b.ITEMXTRAS_1_Type AS Type,
b.ITEMXTRAS_2_Finish AS Finish, b.ITEMXTRAS_3_SubCategory AS SubCategory, b.ITEMXTRAS_4_Department AS Department,
[code]...
View 7 Replies
View Related
Sep 21, 2015
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies
View Related
Nov 18, 2007
Here is a situation in my company:
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
View 1 Replies
View Related
Jun 29, 2015
I'm wondering how to print a SSRS report without bringing up a report viewer. Is there way to print(PDF format) the SSRS report in the web application( .net ) directly from the "print" button without bringing up a report viewer?
View 2 Replies
View Related
Apr 29, 2008
Hi,
I'm encounter lately some weird behaviour of SSRS in BIDS as well as after deploying on Reporting Server.
I'm running basic classical SQL SSRS Reports with Oracle DB connection. My reports have header and footer pagination and well defined report layer configuration. All the reports are simple based on one table and some basic parameters passed to query.
In query builder from BIDS from data tab, the query is running fine without any other execution delays. Also the query is runnign fine in PL/Dev environment.
When I switch in "Preview" mode the report hangs in execution and just showing "Report is being generated" without any resuts. After a while is generating an execution error (after 20 min).
The behaviour is the same after deployment on Report Server .
I now...here it comes...the problem is intermitent...some times the report is working...but most of the times it hangs on execution.
I checked the report from top to bottom and nothing's wrong from design perspective.
On other reports I don't have this problem and I don't understand where to start to investigate.
Any suggestions...I'm stuck here.
Thanks
View 1 Replies
View Related
Sep 16, 2015
I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .
columns are **Level** and **Salesamount**.
Values are like
**[-]category** **100**
**[-]subcat** **50**
**product** **30**
when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.
Here i used the expressions in parameter values
**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))
**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))
**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))
View 3 Replies
View Related
Oct 6, 2015
How do I get data on my linked report based on my grouped subtotal and grand total from the main report. The subtotal and grand total are calculated columns.
I have a 3 columns in my matrix in the SSRS summary report. Actn_COAST, ActnCITY and NumbOfAccts.
The following is code for my summary report. The results are shown below.
SELECT Distinct ActnCITY, Count(ACCT) as NumbOfAccts,
CASE WHEN ActnCITY in ('NY', 'OH', IN, 'NJ', 'SC', 'NC') THEN 'EAST COAST'
WHEN ActnCITY IN ('CA'. 'NV', 'UT', 'WA', 'OR') THEN 'WEST COAST'
ELSE 'OTHER'
END AS Actn_COAST
FROM tbl1
where ACTNDATE between @STARTDT and @EndDT
Code for my detail report contains the following SQL
SELECT * FROM tbl1 where ACTNDATE between @STARTDT and @EndDT AND @ActnCITY = ActnCITY
I have linked my report based on the NumbOfAccts column. I am able to get data if I click any of the NumbOfAccts values related to the state I want. However when I am not sure how to make the subtotal and grand total work. I want when I click on the subtotal of either coast, I should be able to see records of that coast e.g., if I select 37 I should be able to see all the records in East Coast. If I click on the Grand Total, I only want data related to those 2 coasts.
View 2 Replies
View Related
Feb 8, 2015
Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.
View 3 Replies
View Related
Nov 7, 2007
While exporting a SSRS 2005 report in CSV format ,can we include the report headers and footers also to be exported .
Thanks .
View 1 Replies
View Related
Sep 5, 2007
Hi,
I'm having problems navigating from one report to another one if the second report has a multi-valued report parameter. When I navigate to the second report, I don't pass any parameters, but I get an error "parameter is missing a value" for the multi-valued report parameter. I have it setup as allow "multi-value" and "blank value". Any idea what the issue might be?
Thanks.
View 3 Replies
View Related
Jun 22, 2015
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report are static. we are using SSRS 2008
View 6 Replies
View Related
Dec 14, 2007
hai iam new to ssrs, please help me.
i have student billbale information assume what ever data it. i need to to dispaly total amount for the student at
Bottom Of Report By Daily, Weekly, Monthly, SYTD . take any example, i want to know formula.
thanks to advanced
Jacks v
View 1 Replies
View Related
Oct 21, 2015
I have a report which works fine with visual studio but when i uploaded the same into report server and tries to access it through IE or chrome or anything its dam slow.
how to get rid of this issue?
View 4 Replies
View Related
Oct 2, 2015
I need to create a SSRS report using the Warehouse tfs_warehouse DB Report need to be drill down on WorkItemType Parents and child values. So, If we click on Product Back Log Item will get all the tasks inside it and so on....
------->Product BackLog items
----------> Bugs Or Tasks
-----------> Tasks
I have done research and found out how to do it in OLAP cube ..but still can't figure out the TSQL query to be used.Found one of the query on forum:
SELECT * FROM DimWorkItem DWI
INNER JOIN FactWorkItemLinkHistory FWILH ON DWI.System_Id = FWILH.TargetWorkItemID
WHERE FWILH.WorkItemLinkTypeSK IN (SELECT DWILT.WorkItemLinkTypeSK FROM DimWorkItemLinkType DWILT WHERE DWILT.LinkName = N'Child')
AND DWI.System_WorkItemType = N'Task'
AND DWI.System_Rev = (SELECT MAX(DWI1.System_Rev) FROM DimWorkItem DWI1 WHERE DWI1.System_Id = DWI.System_Id)
AND FWILH.SourceWorkItemID IN (SELECT DWI2.System_Id FROM DimWorkItem DWI2 WHERE DWI2.System_WorkItemType = N'Bug');
View 5 Replies
View Related
Oct 9, 2007
Hi,
It appears to work fine on my end however on my clients end, whenever they try to print a report that displays perfectly within the report viewer to their printer by selecting the printer button in the report it never ends up printing.., however if they go into printer setup and change the page range to print from all pages to just maybe one page and then select the print button it seems to print fine..
The printer seems to receive the information as the light flashes but no page kick out when all pages is selected to print..
Any help would be greatly appreciated..
View 1 Replies
View Related
Nov 29, 2007
Does anyone know if the visibility of anything (group, column etc) in a sub-report can be toggled by an item in the master report?
Thanks
Richard
View 4 Replies
View Related
Apr 17, 2008
Hello,
I'm using Reporting Services to render a text (stored in sql as varchar(max)). The text is all plain text, with some lines having trailing spaces.
Source text file i've imported to SQL via SSIS:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
*Note the trailing spaces on the line before 'STATEMENT 2007'.
I've designed a report using the Report Project in VS2005 to retrieve this text via a stored procedure. When I test the report using the 'Preview' tab in the IDE, it looks good
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
But when I deploy the report and run it using URL Access:
CLIENT: 10055
STATEMENT 2007
DATE:1002993
THIS IS THE OTHER STATEMENT
COLUMN1 COLUMN2 COLUMN 3
TRY THIS
On all lines with trailing spaces, they (the trailing spaces) have been removed. This is affecting my formatting of some reports and statements. We really want to use the report viewer as it has built in paging, print and export capabilities.
Why does it look okay in VS2005 but different in Report Viewer via URL Access and Report Manager?
Note: When I export as PDF, it looks okay.
The stored procedure I use to return the data is a CLR Hosted assembly as below:
Code Snippet
Partial Public Class StoredProcedures
<Microsoft.SqlServer.Server.SqlProcedure()> _
Public Shared Sub GetPagedDocument(ByVal inText As SqlString)
Dim dr As SqlDataReader
Dim row As New SqlDataRecord(New SqlMetaData("RowText", SqlDbType.Text))
Dim cmd As New SqlCommand("select cast(doc as varchar(max)) as 'DOCTEXT' from testdoc WHERE id='" + inText + "'")
Dim cn As New SqlConnection("context connection=true")
cn.Open()
cmd.Connection = cn
SqlContext.Pipe.SendResultsStart(row) 'initialise the resultset to be returned
dr = cmd.ExecuteReader
'If no records in result set, return.
If Not dr.HasRows Then
row.SetString(0, "There is no document to display or you do not have permission to view the document.")
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
' SqlContext.Pipe.Send("There is no document to display.")
Return
End If
'Read rows in the result set
dr.Read()
'Get the entire text
Dim docText As String = dr.Item("DOCTEXT")
'debug
row.SetString(0, docText)
SqlContext.Pipe.SendResultsRow(row)
SqlContext.Pipe.SendResultsEnd()
Return
'end debug
End Sub
End Class
Any help will be appreciated.
View 3 Replies
View Related
Dec 14, 2012
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
View 6 Replies
View Related
Jun 30, 2009
we need the list suppliers in a text box,if it were a parameter, we can do it by =join(parameters!Supplier_ID.Value,",")but if the Supplier Id is a field , join (Fields!Supplier_ID.Value,",") doesnt work!how to achieve this.
View 9 Replies
View Related
Aug 12, 2014
I have a report parameter textbox in my SSRS report which has the parameter properties as "allow null value" and "allow blank value" checked.
How I can ensure that when the value is entered in textbox, it should accept any character ie. The SQL code I should write so that all the characters inputted via the report parameter are accepted.
View 1 Replies
View Related
Jun 29, 2007
Do I need the report server running in order view a SSRS report in a report viewer control? I've created my report in .net and it works great when I'm viewing it in visual studio, but can I run it my web app without the report server.
View 1 Replies
View Related
Feb 6, 2008
Hi,
When i select datasource in Report Builder, i am able to see all the available DataSources.
Eg: I have selected one datasource from the list and which has 3 tables(table1, table2, table3) associated to that datasource.
when i drag and drop table1 fields to report, i am not able to see the other 2 tables(table2 & table3)
Is there any property or relationship do i need to maintain?
Thanks,
SR.
View 5 Replies
View Related
May 8, 2008
Hello Friends,
I am using an action report(SSRS Report) in a Proclarity report in which the user generate action report on some particular filters. The problem is : In this report (SSRS report) I am using two row groups and three data fields and intially i am displaying the report in collapsed manner. The report is working fine in BIDS and as well as on the report server. But when i am generating the report through prolarity , the report is getting generate but when i tried to expand the collapsed field its throwing an error
"An internal error occured on the report server. See the error log for more details. Specified argument was out of the range of valid values"
Can anyone help me out to solve this issue.
Thanks & Regard's
View 1 Replies
View Related
Jun 4, 2007
I have RS 2005 SP1. I have a report model developed and deployed.
I have a scenario and I am not sure if it is possible to create a report for this scenario using the report builder. Let's say I have a customers entity and address entity that is related to the customer's entity as a 1-many relationship. I have the effective date on the address that specifies the date from which the address is effective. A customer will have multiple records in address with the latest effective date as the latest address of the customer.
Suppose, I need to create a report using the report builder to get the list of latest address for customers, how can I do it? I know it can be done using the report designer using a query that uses the group by clause. But can it be done using report builder?
Thanks in advance.
View 4 Replies
View Related
