New here:) and hoping someone might be able to shed a little light on a problem I am having.
I have a job scheduled, which needs to be periodically stopped and then restarted.
After looking through various places I think the start method and stop method are the best bets?:rolleyes:
But not really sure to be honest.
Can anyone give me some tips/pointers/opinions on what would be the best way to do this. (have tried to setup a job with the said method in each step - but it doesn't like my syntax.
I have quick question. Ihave a job which consists of 9 steps. 9th step is: Exec xp_cmdshell 'c:mssql.bat'. in this batch file I am stopping and starting SQL services using net stop and net start command. This job is running perfectly but it is not giving the job history when I right click the job and view job history I can't see anything where as if I check the checkbox for Show step details it showing first 8 steps information but it is not showing 9th step information. Even I checked the Sysjobhistory system table in MSDB it shows only 8 steps information. What is the reason....
Is there any way to schedule stop and start of NT services at a particular time daily.
For eg: If i have a service by name TemServer and if i need to stop that service each night at 9:00 and restart as soon as it stops.??
And Is there any way to start and stop the services of NT from workstation. Each and every time i am going to the server room for stopping the service and restarting.
how i can do it?Under Xp/2000, i write a application that stop/start this serices, butunder Win98, how i do it?Exists a method via SqlServer or a dos command to stop/start the MSDEprogram?Thanks a lotTomas--Questa è una firma automatica di MesNews.Sito: http://mesnews.no-ip.com
What is impact, if i stop and start Synchronization, for one subscription.
When i start, will it resync all tables by dropping and recreating at subscription.
On Publisher,  from Location Publiction,   right click on subscription,       select View Synchronization Status,  From here, stop and start
Profiler was run against a database looking for "long running" queries. I used the Duration column to filter out the queries that I didn't want. When reviewing the output, I noticed that for some queries the StartTime was equal to the EndTime even though the Duration was set higher. My question is, "What can account for this discrepancy and what inferences should I draw about the difference?" Does the difference represent a resouce being locked or some other type of blocking (Duration) and once the query was allowed to run, it completed quickly? TIA
======================================= If Tyranny and Oppression come to this land, it will be in the guise of fighting a foreign enemy. -James Madison, fourth US president (1751-1836)
I want to create a package which start and stop the SQL server's services... i know i can achive this via NET COMMAND.... but i coudnt find in which task (SSIS) I can place that command?..
I also came across that I can achieve this using Execute Process task but for this I have to define executable file.... actually i dont want ne thing outside from my SSIS package
I want to tell to user about SQL Server Configuration Manager and wants to allow him "START / PAUSE / STOP" for SQL Server Express in system Tray. It is easy for the end user who don't know SQL Server.
A few service stop/start/restart questions on SQL Server 2005 SP2, whichI'll call SQLS.It looks as if there are *potentially* 6 ways to start/stop SQLSServices like the engine itself, integration services, reportingservice, Agent..-SQLS Configuration Manager-SQLS Surface Area Configuration (for Services and Connections)-Mgmt Studio Local (on server)-Mgmt Studio Remote (on client)-Windows Control Panel->Admin Tools->Services-Command Prompt (ala net start MSSQLSERVER)By policy, I am /not/ Administrator on the server. But I am SysAdminrole in SQLS. I have had various levels of success starting/stoppingservices in the ways listed above. In some I get Access denied, and inothers I get no msg and it simply doesn't work.Is there some special non-Admin OS group I need to be in to start/stopservices? Is this handled differently in the different interfaceslisted above?It seems like my best success for starting/stopping the engine and Agentis in /local/ Mgmt Studio, but /not/ remote Mgmt Studio - the optionsare greyed out on a remote client. Is this by design? Is it a SQLSbug?I'm sure I'm not the only SQLS DBA who does not have Admin rights on hisserver who wants to start/stop services. Generally speaking, how isthis intended to work?Any help appreciated.Allen JantzenA freshly minted DQLS DBA
Hi I have upgraded my local to sql server 2005, but still need to access the remote instance which is still at version 2008/8.0. Enterprise Manager has been removed (by the SQL server 2005 installation) Does anyone know how I can restart older version of SQL server instance (ie 2000/8.0) using SQL server Management Studio?
I don't have admin access on the server which the sql remote instance is hosted. Can get around it by asking the sys admin guy to do it for now but would prefer to continue to be able to do it myself. SQL Server Configuration Manager can only manage SQL server 2005 versions - a nice little caveat!
Is there a way to stop/start remote services using 'net stop/start'? - without having to write code.... I'll continue to search for a solution, but if someon can point me in the right direction, I'd be most greatful.
I'm getting this error message when I upgraded the SQL Server to install SSIS and other components.
===================================
The service did not respond to the start or control request in a timely fashion, you need administrator privileges to be able to start/stop this service. (SQLSAC)
------------------------------ Program Location:
at Microsoft.SqlSac.MainPanel.ServiceProgressBar.RefreshService()
For some reason the status lights in my Enterprise manager are no longer working. I am connected to the databases, but because the indicator lights are not working, I can`t get a quick visual status of my servers. Any way to get my lights back on?
I have a question about granting enough rights to allow a non admin user to start and stop a sql server service via the SQL Server Management Studio by right clicking on the server node.
I have changed the acl's of the SQL Server service security and gave the user rights to start and stop the service. This does allow them to connect remotly to the server using computer manager and they successifully start and stop the service. But, in SQL Server Management Studio the option still does not show up, unless he is a admin of the server.
Does anyone know what other security settings I need to address for the start and stop to show up when I right click on the server node?
Hello, I have a Question/doubt on SqlDependency.Start/SqlDependency.Stop.
After the implementation of my solution the question sounds "stupid" ... maybe is only the stress due to the fact that I'm going to deploy the application on Test.
Anyway.. I developed this application (windows application) that uses query Notification features to subscribe and get notification from Sql Server 2005 so it use the tipical pattern: SqlDependency.Start, SqlDependency_OnChange,SqlDependency.Stop.
This is application is installed on several client so actually I get have several notifications running on the Server.
When one of the client exit the application and call SqlDependency.Stop the service, queue and procedure are dropped.
Does the command drops all the query notification' service, queue and procedure running on the instance or only the one created by the specific user?
Hi,I am trying to write a method which needs to call a stored procedure and then needs to get the response of the stored procedure back to the variable i declared in the method. private string GetFromCode(string strWebVersionFromCode, string strWebVersionString) { //call stored procedure } strWebVersionFromCode = GetFromCode(strFromCode, "web_version"); // is the var which will store the response.how should I do this?Please assist.
Hi, I just have a Dataset with my tables and thats it I have a grid view with several datas on it no problem to get the data or insert but as soon as I try to delete or update some records the local machine through the same error Unable to find nongeneric method... I've try to create an Update query into my table adapters but still not working with this one Also, try to remove the original_{0} and got the same error... Please help if anyone has a solution
Hi All I am using SQL server Database in one of my table there is a column which is set to Identity=Yes i.e., The ID is increment by one on every insert and if the insertion failed then the id generated goes off then in the next generation it uses new id ..........EXfirst insertion id=1 then in the second insertion if while adding data to other rows if i get some error then the id 2 is not used and when i correct the error and insert it then id=3? can any one give me the solution for this and NextWhen i delete the datafrom the table see the ids are upto 20 and i delete all the records from the table after insertion of new record the id will be 21plese help me in this
I have a snapshot replication is running and now I want to stop the replication for a while. Is it possible to do that? If it is then where I can set to stop it? Please help.
I use EM to handle 2 SQL servers. One I can `stop`; the other I can`t. (except I think I used to be able to do so).
When I select the `stop` I get the following message from EM:
"An error 1051 - (A stop control has bee sent to a service which other running services are dependent on) occurred while performing the service operation on the MSSQLServer service."
How do I track down what this other running service is? How do I stop SQL?
I wanted to remove my Northwind database. But that database is currently used for replication. I'll have to stop the replication first before I can remove it.
Hi, Can anybody tell me how to stop the execution of a T-SQL statement at once? I have tried Alt+Break but its taking a long time to stop.Whats the reason?Plz suggest....I am dealing with a database containing 24343000 data. Joydeep
I have a statement that has been running great for the past hour but now it will not pull the info any longer and just gives me a null
DECLARE @Text VARCHAR(2000) SELECT @Text = COALESCE(@Text + '', '') + x.memotext FROM (SELECT TOP 100 PERCENT memotext FROM customermemoheader WHERE memonumber = 'TERMS' and customernumber = '0009' ORDER BY seqnumber) AS x
SELECT @Text AS MemoText
I have verified in the tables that the info is there by running the select statement from within the (). It has worked for 8000 records and now it no longer works. Any help would be much appreciated.
