i'm using vs 2005 pro edition
i try to enable the statment completion in option menu
i try this path (otpton ->text editon->sql script )
but statment completion is grayed i can not check this part
how i must do to enable it
thank a lot
Greetings,
I am trying to restore a SQL Server 2005 database from a backup file and experiencing a hanging issue after its "finished"
I am doing this in SQL Server Management Studio, generating the following SQL for Restore:
RESTORE DATABASE [AdventureWorks2]
FROM DISK = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLBackupAdventureWorks.bak'
WITH FILE = 1, NORECOVERY, NOUNLOAD, REPLACE, STATS = 10
GO
When I run this on the machine i originated the backup with (creating AdvWorks2) it runs fine in no time.
When I run this command on another SQL Sever 2005 instance on another host. It appears to run fine, and I see progress going up to 100% and it says "Restore Completed Successfully"
BUT, for some reason, the database in object explorer is stuck with a "(Restoring...)" label attached to its tree item and I am unable to perform any activities on that database instance. It claims, it's in the middle of a restore operation! again this is after it had reached 100% on progress and declared successfull completion.
Any ideas what could be causing this?
(Note: Both instances are SQL Server 2005 - Service Pack 2)
Thanks,
-ali
Is there any built-in way of kicking off a job on SQL Server 2005 Agent whenever a package/job completes in Oracle?
Are there any (Triggers? Msft queue? Event Notification?) mechanisms to automate running a job on the SQL side?
Any article or knowledge articles would be appreciated also.
If not are there any built-in stardardized polling techniques? Or are there any timers in SSIS?
That way I can delay executing a child package until a certain record has been inserted into a control table in Oracle.
I don't want to write an inefficient for loop that blocks all other processing on the server and iterates once every second.
Thanks
I'm very confused. I installed Visual Studio 2005 and thought I understood that SQL Server 2005 came with it, but it appears that it's SQL Server 2005 - Express. Can anyone tell me what I need to do in order to get Data Transformation Services loaded or the equivalent of DTS in SQL Express?
Hi all
I have two tables I need to Select the record from the First table and insert them into the second table and delete the record from the first table how can i do that with the SQL Statment?
Thank you in advance .....
Regards,
sms
I am using vs 2005 and sqlserver 2005 to manage a large database. I need to create a series of text files based on the value of one of the columns. Is there an sql command that will pipe the output directly to a file?
Thanks,
Mike
I recently installed the Evaluation Edition of SQL Server 2005 x64 and it appears that MS Visual Studio 2005 is installed in stead of SQL Server Business Intelligence Development Studio. When I choose new project the only template available is "Blank Solution". How do I get all the templates (i.e. Analysis Server Project, Integration Services Project, Report Model Project, Report Server Wizard project, etc.)?
Or would it be better to uninstall MS Visual Studio 2005 and attempt to reinstall BIDS?
I am new to visual studio and I am still not sure of all its components and features.
I installed visual studio 2005 standard edition but cannot find SQL Server Management Studio?
I guess this must be because it is not included with Visual studio 2005 standard. Is it included with VS 2005 professional?
I want to add pictures of products to my shopping site using an SQL database and I’ve been told that SQL Server Management studio is required as it is a graphical tool.
How would I go about obtaining the SQL server management studio. There seems to be different versions of SQL server that it is confusing to know which one to purchase.
Will the SQL server 2005 version that comes with Visual studio standard be sufficient for me now right? I want to create a shopping site with hundreds, perhaps even thousands of products. I want to use an SQL server 2005 database. The database will include ‘dynamically generated’ product images if that is the correct terminology.
My goodness, it seems I still have so much to learn.
Thanks
I am trying to import Access reports using Visual Studio 2005 and Access 2007. SQL Server 2005 with Reporting Services is also installed. I select Reports in the Solution Explorer and then Import Reports... Microsoft Access and browse to my Access database. After I select the database I see it open briefly as if it is trying to import the reports but then Access quickly closes and a error pops up: "You already have the database open." I have checked and double checked and the database is not open. I have even tried several different databases and the same errror occurs. Any help would be greatly appreciated.
Hello everybody!
I hope that someone could help me.
I have a problem when i start sincronyzing with the emulator of MSVS2005 to SQL2005 in Windows Vista. I have the same program in the emulator, but sincronyzing with windows XP Pro and no problem...
I configure the connection to use the IUSR.
The source code that i use:
repl.InternetUrl = @"http://laptop/SQLMobileIIS/sqlcesa30.dll";
repl.Publisher = @"laptop";
repl.PublisherDatabase = @"database";
repl.PublisherSecurityMode = SecurityType.NTAuthentication;
repl.Publication = @"Pubdatabase";
repl.Subscriber = @"SQLMobile";
repl.SubscriberConnectionString = @"Data Source='" + nomeFicheiroBD + "';Password='3409'";
The error that returns is:
"Failure to connect to SQLServer with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect"
Does anybody knows what i can do?
HELP I NEED SOMEBODY TO HELP!
Thanks!
I ask because I'm still looking for the source of interface problems I have in using the SSIS designer.
View 4 Replies View RelatedI currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
thanks!
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
Hello, I would like to know if anyone here has any information on how to change the default version of SQL Server 2005 Express which ships with Visual Studio 2005 to the new SQL 2005 Express SERVICE PACK 1?
I see a file under disc:vswcuSSESQLEXPR.exe I am wondering if changing that file with the new one from Microsoft Download Center will do it...
There's another file under that folder named sqlexpr32.exe I am wondering what it's for?
Thanks in advance.
Hello,
we have a SQL server 2005 with Visual studio Prof. 2005 in the
employment.
The debuggers function only in Visual studio correctly, as long as no
code on the SQL server must be implemented.
If a BREAK POINT in a Stored Procedure is set, this is not activated,
since this cannot be bound.
Does someone know, what it lies and can like one it eliminate?
Thank you for your assistance in advance.
Yours sincerely
Big_Ben_31
This entry was translated automatically with the translation
service babel.altavista.com from the German into English.
Hi, I am running SQL Server 2005 x64 DE on Vista x64. I installed MS VS 2005 Pro. Edition. During the setup of VS, I did a custom install, un-checking the SQL Express addition box. After installation, I received errors that indicated the SQL Express did not install. Even though I do not have SQL Express installed on my machine, MS Update says that I need SQL Express SP2. My SQL DE is up to date with SP2 and MS Update indicates as "optional" that I need SQL SP2.
Is SQL Express a necessity for VS Pro? If not, why is MS Update indicating that I need SQL Express SP2? In addition, why is MS Update telling me I need SQL SP2 when it is already installed?
Note: I installed SQL SP2 manually, not through MS Update. This makes me believe that MS Update is not detecting it.
Thanks in advance to anyone who can help,
Abel
hi,
I have some SQL CE database .sdf file on my handheld, and I was trying to connect to that file via SQL Server 2005 Management Studio, and it does not work. I am wondering if there is any good tool that I can use on desktop to connect to sqlce .sdf database file on my handheld?
Thanks.
I've got a table adapter that connects using an oracle data connector. In the adapter, I'm using native oracle SQL such as:
select TO_DATE(SUBSTR(TO_CHAR(weird_oracle_field),0,12),'YYYYMMDDHH24MI') as dt_added from oracle_data_table
There's also a CASE statement in there with some other data transformations.
Anyway, I want to take the results of that Oracle query and put the dataset into a SQL Server Compact Edition database - within an application that I'm creating in Visual Studio 2005.
For whatever reason, I can't seem to do anything like that in 'bulk' and there aren't any data migration tools that work with anything other than "full" SQL Server versions. My client doesn't support SQL Server, but I can deploy my app with SQL CE. I need a 'local' copy of the database (for several reasons) and just can't seem to figure out how to make this work.
I'm really going nuts. I feel like I'm soooo close when I see the data I want in the table adapter - but I can't seem to actually *move* the data over!!
Can anyone help?
thanks,
Jon
Hi,
I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
"
Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251
"
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S.
I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
Hello, How are you?
I have a problem when I try to create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE. When I€™m going to choose the data source, the SQL Server 2005 Compact Edition provider doesn€™t appear in the list. I installed the SQL Server 2005 Compact Edition from this page http://www.microsoft.com/downloads/details.aspx?FamilyId=%2085E0C3CE-3FA1-453A-8CE9-AF6CA20946C3&displaylang=en. In the additional information says by installing SQLServerCE31-EN.msi installs the provider (System.Data.SqlServerCe.dll) in the GAC (global assembly cache) and registers the OLEDB provider (sqlceoledb30.dll). So, I don€™t understand why couldn€™t I create a new connection with Microsoft SQL Server 2005 Compact Edition from Visual Studio 2005 IDE?
I appreciate your help€¦
Hi,
I understand from previous threads that installing SQL Server 2005 Service Pack 2 on the desktop client can speed up the response rate of the Visual Studio 2005 Business Intelligence Tools.
However after logging on as an administrator and installing Service Pack 2, Service Pack 2 returned no errors. However after launching Visual Studio and clicking on the about dialog box the version reported was still €œRTM.050727-4200€? where I was expecting to see €œSP.050727-7600€?.
I understood that I applied the same service pack to my copy of SQL Server on my laptop and the upgrade worked successfully.
Can anyone help?
Thanks in advance,
Kieran.
Hi there,
Anyone know how I can replace (or download) the sqlexpr32.exe bootstrap package with the advanced services SP2 edition of SQL 2005 express ?
Pieter
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
The program shortcut "Visual Studio 2005 Command Prompt" seems to be mising from the "Visual Studio 2005 Command Prompt" Start menu added by the current Microsoft SQL Server 2005 Express Edition Toolkit. Where is it? How to workaround?
I am trying to do Download details SQL Server 2005 Samples and Sample Databases (April 2006) -> GettingStartedWithSQLSamples.htm which says "a. Open a Microsoft Visual Studio 2005 command prompt. Click Start, point to All Programs, point to Microsoft Visual Studio 2005, point to Visual Studio Tools, and then click Visual Studio 2005 Command Prompt." but I can find no such command prompt within "Visual Studio Tools", only "Visual Studio 2005 Remote Debugger{, Configuration Wizard}".
What's wrong? How to fix or workaround? I'd install .NET SDK 2.0 to get it's Command Prompt but that's about 570MB merely for a command prompt!
Thanks for your help, -Mike Parker
I'm having some problems debugging SQL Server stored procedures on a SQL Server 2005 server. I have installed Visual Studio 2005 on a workstation running Windows XP, now I'm trying to debug a ASP.Net web application that has some code that executes the stored procedures on a Windows 2003 Server running SQL Server 2005.
I opened VS2005 ... created a connection to the SQL Server 2005 instance ... open the Stored procedure ... right click the stored procedure name and selected Step into Stored Procedure and the following message is displayed:
Unable to start T-SQL debugging.Could not attach to SQL Server process on 'ServerName'.
Any ideas.
Thanks,
Hi everyone,I am trying to connect to SQL Server 2005 Express with Advanced Services from Visual Studio 2005 Standard Edition. I have SQL Server 2005 Standard Edition but it took up so much space and resources on my computer that I didn't want to put it back on there. So I put the SQL Express on there and while the Management Studio application connects just fine, VS 2005 will not. Oddly enough, VS 2005 connected just fine to SQL 2005 Standard. I have enabled shared memory, named pipes and TCP/IP. I have set up SQL Express to accept remote connections on named pipes and TCP/IP. And I have tried running SQL Express as the Local System Account, as a Local Service and as a Network Service. Nothing. I have tried feeding the Server Name is the Data Connections dialog in Visual Studio my SQL Express instance as (local)/SQLEXPRESS, localhost/SQLEXPRESS, and {computername}/SQLEXPRESS where {computername} is the name of my local computer which SQL Express is (allegedly) running on. And I cannot get the list of databases on that server.There is probably something very simple that I have left out. Can anyone see what it is?Thanks!
View 2 Replies View RelatedHello
Im pretty new to development so..... be nice guys.
I have VS2005 pro and SQL Server 2005 developer edition installed. When I open VS, in the server explorer i can connet to databases located on the SQL directory (SQL Server runs perfectly) But when i try to add an sql server to my project( add new item --> SQL database) it gives me an error saying "Connection to SQL server files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the installation of the component......"
HELP! donno what VS wants!
Hey
I need to know what shall i specify in this connection string in visual studio web.confug file inorder to connect to ma registered server (locally) not directly to my dedicated server ....cuz i am facing network connection problems ....
b4 i used to use this connection string :
<add key="conn" value="data source=IP addresseel,1433;initial catalog=xxx;user id=username on the dedicated server;Password=password on the dedicated server;timeout=60"></add>
So how can i change it ???? to be able to connect locally ????
Please Help ???!
Thanks in advance
Hiba
Hello
I'm having a problem with the server connection and my C# code. The code executes alright but no data is entered into the database behind it. I'm pasting the connection code over here as well. The sql commands are used in the code. I think I used the sql server mobile edition which is installed along with visual studio.net 2005. Anyone know what's wrong, and can help me out? Thanks in advance.public static void storeInDb(string trackName, string artist, string albumTitle, string year, string path, uint[] fp)
{
string connStr="Data Source=.\SQLEXPRESS;AttachDbFilename='"+path+"\Data\ACI.mdf';Integrated Security=True;User Instance=True";SqlConnection conn = new SqlConnection(connStr);
conn.Open();string sql = "INSERT INTO Clip(Song, Artist, Album, Year) VALUES('" + trackName;sql = sql + "','" + artist + "','" + albumTitle + "','" + year + "')";
SqlCommand cmd = new SqlCommand(sql, conn);
cmd.ExecuteNonQuery();
sql="SELECT max(ClipID) FROM Clip";
cmd = new SqlCommand(sql, conn);int id = Int32.Parse(cmd.ExecuteScalar().ToString());for (int i = 0; i < fp.Length; i++)
{
sql="INSERT INTO Hash VALUES ("+id+","+(i+1)+","+(int)fp[i]+")";cmd = new SqlCommand(sql, conn);
cmd.ExecuteNonQuery();
}
conn.Close();
}
I have windows XP box, installed MS Visual Studio 2005 without SQL 2005 express.After this I have installed SQL 2005 Express edition and then SQL 2005 client toolkit.
Now when I open "SQL Server Business Intelligence Development Studio", it gives message missing shortcut and searches for devenv.exe file. That is the problem, I dont know where is problem..??
Please anybody help me............???
Cheers,
Gurpreet
Dear All,
I am basically new as far as SQl server 2005 concern.
I want to try out reporting services provided by sql server 2005.
That is make report using sql server 2005 and call that report from web or window application.
Please guide me in doing so or give me some useful link.
Thanks
ok so i have set up SQL server 2005 on a Windows server 2003 machine. I am trying to connect to it via ODBC and/or Visual Studio 2005 on a computer running off the same switch. I have set SQL server to accept remote connections and named pipes as well as had the port unblocked. when i try and connect to it via Vista ODBC wizard or visual studio wizard it says that the server is not there or access is denied.
The server is set up for SQL authentication and i am 100% pos that the username/password i am using is correct. i am at a total loss as to what to do to get my vista machine to talk to that SQL server.
Hi,
for some reason, when I've installed visual studio 2005, I didn't install also SQL server.
Than I've updated VS with Service Pack 1 (thank god, I was trying unsucesfully for about 2 weeks :/ ).
Than I want to install MSSQL 2005 and an error came up:
Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
SQL Server Setup has detected that the following required component is not installed: Microsoft Windows Installer 3.1. To proceed, download and install the Windows Installer 3.1 Redistributable from http://go.microsoft.com/fwlink/?LinkId=50380 , and then run SQL Server Setup again.
1. The http link leads to main page of MS Download Centre.
2. I have Installer 3.1. (version of file c:windowssystem32msiexec.exe said so)
3. I really do not have any beta version of any mentioned SW. I never had.
So I think the issue could be, that installer is checking for not updated version of Visual Studio.
(I was searching through net/msdn and seems no one had this problem (maybe wrong keywords, though) ).
I'm running setup.exe from CD1.
Uninstalling of VS Service Pack 1 is not an option. I really don't want to spent another week by installing it.
Please tell that there is some another way :) .
Thanks a lot.
Here are some logs:
SQLSetup0001_COMP_Datastore.xml
<Datastore>
<Scope Type="SetupBootstrapOptionsScope" Id="2336">
<Property Id="QuietSwitchPresent">0</Property>
<Property Id="LogSwitchPresent">0</Property>
<Property Id="ErrorReporting">0</Property>
<Property Id="DeleteManifestFileMode">1</Property>
<Property Id="MultiInstanceEnabled">0</Property>
<Property Id="ComponentUpdateOnly">0</Property>
<Property Id="ReducedUI">0</Property>
<Property Id="PatchedSetup">0</Property>
<Property Id="LocalSetup">0</Property>
<Property Id="InitiateReboot">0</Property>
<Property Id="HostSetup">1</Property>
<Property Id="RemoteMode">0</Property>
<Property Id="Remote">0</Property>
<Property Id="LoosenedSccChecks">{ }</Property>
<Property Id="DisabledSccChecks">{ }</Property>
<Property Id="LocalRebootPending">1</Property>
<Property Id="CmdLine">********</Property>
<Property Id="InstallMediaPath">Y:</Property>
</Scope>
<Scope Type="SetupStateScope" Id="">
<Property Id="machineName">COMP</Property>
<Property Id="logDirectory">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG</Property>
<Property Id="logSummaryFilename">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt</Property>
<Property Id="logSequenceNumber">1</Property>
<Property Id="primaryLogFiles">{ ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_COMP_Core.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt"] }</Property>
<Property Id="watsonFailedAction">PerformSCCAction2</Property>
<Property Id="watsonFailedActionErrorCode">87</Property>
<Property Id="watsonFailedFunction">sqls::PerformSCCAction::perform</Property>
<Property Id="watsonFailedFunctionErrorCode">87</Property>
<Property Id="watsonSourceFileAndLineNo">setupsqlsetupactions.cpp@1390</Property>
<Property Id="watsonModuleAndVersion">setup.exe@2005.90.1399.0</Property>
<Property Id="watsonMsi">None</Property>
<Property Id="watsonMsiAndVersion">None</Property>
<Property Id="watsonSourceFile">setupsqlsetupactions.cpp</Property>
</Scope>
</Datastore>
SQLSetup0001_COMP_Core.log
Microsoft SQL Server 2005 Setup beginning at Wed Mar 14 18:23:08 2007
Process ID : 2336
Y:setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/2/14 18:23:8
Complete: LoadResourcesAction at: 2007/2/14 18:23:8, returned true
Running: ParseBootstrapOptionsAction at: 2007/2/14 18:23:8
Loaded DLL:Y:xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/2/14 18:23:8, returned true
Running: ValidateWinNTAction at: 2007/2/14 18:23:8
Complete: ValidateWinNTAction at: 2007/2/14 18:23:8, returned true
Running: ValidateMinOSAction at: 2007/2/14 18:23:8
Complete: ValidateMinOSAction at: 2007/2/14 18:23:8, returned true
Running: PerformSCCAction at: 2007/2/14 18:23:8
Complete: PerformSCCAction at: 2007/2/14 18:23:8, returned true
Running: ActivateLoggingAction at: 2007/2/14 18:23:8
Complete: ActivateLoggingAction at: 2007/2/14 18:23:8, returned true
Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result.
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2336" returned false.
Running: PerformSCCAction2 at: 2007/2/14 18:23:8
Error: Action "PerformSCCAction2" threw an exception during execution.
Return Code: 87
Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
SQL Server Setup has detected that the following required component is not installed: Microsoft Windows Installer 3.1. To proceed, download and install the Windows Installer 3.1 Redistributable from http://go.microsoft.com/fwlink/?LinkId=50380 , and then run SQL Server Setup again.
Class not registered.
Running: UploadDrWatsonLogAction at: 2007/2/14 18:23:9
Message pump returning: 87