Store Into Database Report Parameters Values?

Feb 3, 2007

Hallo
is it possible to perform an insert/update query upon the execution of a report, using the report Visual Basic expressions?
I mean, the user enters some values for the report parameters, and i would like to store them, along with the resulting recordset data, into a dedicated table in the database.

View 1 Replies


ADVERTISEMENT

How To Get The Values From Dataset To Parameters On Report Header

Mar 13, 2008



Is it possible to get the reportdataset field values into parameters. dynamically when the report is generated.

Thanks.

View 1 Replies View Related

Use Of Parameters To Hide Column Values Of A Report

Oct 10, 2007



HI All,

I want to send a reports to two person. Reports are going to be delivered automatically. I hope to use snapshot option. In my report there is one column which can be seen by only one person. Can I use parameters to hide one column from one person? If its possible, can you explain how to do that please. If its not possible, what are the other option excet creating two different reports.
Also If I use parameters , can reports be executed automatically?
Thanks

View 2 Replies View Related

Urgent... Report Parameters Not Retaining Values

Sep 17, 2007

Hi all,
I've developed few reports
I'm passing values to few parameters in a report from menu report.
when I click on "View Report" button values are changed to default for parameters eventhough I've not changed specifically any values for parameters. thus report is missing few parameters and not able to execute properly..
this error occurs only in web environment.. after publishing reports.. they are working fine in developer suite(Visual Studio)

please suggest any ways to overcome this issue..

seniors.. pls throw some light ..


thanks in advance

View 1 Replies View Related

Default Values For Parameters Automatically Generates Report

Apr 26, 2007

I have created a report, and am setting default values for the parameters. Once the default parameters is set, the report automatically generates. Is there a way to make it not automatically generate the report? We are setting the parameters with values that will get the end user the most recent data, but alot of times, they will want to pull older data as well. We don't want them to have to wait for the report to automatically generate before they can change the parameter values

View 1 Replies View Related

Changing The Report Parameters Or Data Sources To The Values You Specified Is Not Allowed

May 24, 2007

I have a report I want to modify and when I go to deploy it I get:



Changing the report parameters or data sources to the values you specified is not allowed. The report is configured to run unattended. Using the specified values would prevent the unattended processing of this report



Now I understand the error, it is because on the report server's web management interface I entered credentials for the report to run that point to a custom datasource and supplied the appropriate credentials to run the report.



However, I don't want to have to reconfigure that just to deploy a slightly modified version of the report.



How can I get around this? Or what is the proper work around? I just want to change the background color from dark gray to light gray on a header column....



Thanks!

View 5 Replies View Related

Transact SQL :: Creating Report - Query With Parameters Based Off Values

Sep 1, 2015

I have the following report I need to create with 2 parameters. An equal OR not equal. I need the report to have a drop down that has equal to  '1024' or a drop down option that IS NOT equal to '1024'. I also need the WHERE clause to return the equal or not equal based on the user selection inside of SSRS.

SELECT user1 AS [Company], reference AS [PAI_REF], statenumber,
LEFT(user4, 7) AS [Supplier Code],
user4 AS [Company Information], 
user8 AS [Transaction Type], user2 AS[Invoice Number], 
--CONVERT(VARCHAR,CONVERT(Date, user3, 103),101) AS [Invoice Date],
[routeName] AS [Route], username AS [User Name]

[Code] ....

View 2 Replies View Related

Show/Hide Report Parameters Based On Selected Values In Different Parameter

Mar 14, 2007

Hi All,


I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.


Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.


Is this possible? I can not see any Visible property for report
parameters.


If yes, how to achieve this functionality?


Appreciate your help.


Regards,
Raghu

View 1 Replies View Related

Want To Store Arabic Values In The Sql Server Database

Feb 27, 2008

Hi,

I want to store arabic values and dates in sql server database.

I am using visual basic 2005 with sql server 2005. I entered the the arabic values through visual basic forms. But when i open the database table, i see the values in english format.

I change my regional settings of the operating system is arabic (platform vista).

Can you give how to see arabic values.

Thanks.


Regards
Kashif Chotu

View 3 Replies View Related

To Display Two Values In Combobox But In Database Will Store Only One Value Out Of That

Jan 24, 2008



hi friends
i am using visual studio 2005. i need one combo box which will display two values. one is "Designation" i.e.("clerk,accountant,manager,officer,shopkeeper) and another "Designation ID" i.e.(1,2,3,4,5 and respectively) i made table of "Designation Master" in sql server 2000 including field of "Designation ID, Designation". manually i am inserting id and designation in that table.
what i want exactly i have one customer form which contain a "combobox" for "Designation" column i achieved "Designation ID" and "Designation" in that combo box also but when i will go for save i want that i will store only "Designation ID" i don't want to store "Designation" in my "Designation" column which is in "Customer table" i am attaching code which store "Designation ID" and "Designation" in customer table but i want only "Designation ID" only
bold line which is difficult for me to inserting only "designationId" in customer table.




Inventory_Master.cntData.Open()

cmdstr = "Select DesigID,Designation from Designation_Master"

cmd = New SqlCommand(cmdstr, Inventory_Master.cntData)

cdrCustomer = cmd.ExecuteReader()

If cdrCustomer.HasRows = True Then

While cdrCustomer.Read()

cmddesig = cdrCustomer.Item(0).ToString.PadLeft(1) + cdrCustomer.Item(1).ToString.PadLeft(25)

cbodesignation.Items.Add(cmddesig)

End While

Else

End If

Inventory_Master.cntData.Close()



Inventory_Master.cntData.Open()

cmd = New SqlCommand("insert CUSTOMER(Membership_No,Member_Initial,Member_Name,Member_Birthdate,Gender,Res_Telno,Mobile_No,Res_Addr1,Res_Addr2,Res_City,Res_Pincode,Landmark,Company_Name,Comp_Addr1,Comp_Addr2,Comp_Telno,Comp_City,Comp_Pincode,Designation,Credit_Limit,Income_Mthly,Email_ID,Note) values (@Membership_No,@Member_Initial,@Member_Name,@Member_Birthdate,@Gender,@Res_Telno,@Mobile_No,@Res_Addr1,@Res_Addr2,@Res_City,@Res_Pincode,@Landmark,@Company_Name,@Comp_Addr1,@Comp_Addr2,@Comp_Telno,@Comp_City,@Comp_Pincode,@Designation,Convert(money,@creditlimit),@Income_Mthly,@Email_ID,@Note)", Inventory_Master.cntData)

cmd.Parameters.AddWithValue("@Membership_No", txtmebno.Text)

cmd.Parameters.AddWithValue("@Member_Initial", cbomebname.Text)

cmd.Parameters.AddWithValue("@Member_Name", txtmebname.Text)

cmd.Parameters.AddWithValue("@Member_Birthdate", dtime.Value)

cmd.Parameters.AddWithValue("@Gender", cbogender.Text)

cmd.Parameters.AddWithValue("@Res_Telno", txttelno.Text)

cmd.Parameters.AddWithValue("@Mobile_No", txtmobileno.Text)

cmd.Parameters.AddWithValue("@Res_Addr1", txtresaddr1.Text)

cmd.Parameters.AddWithValue("@Res_Addr2", txtresaddr2.Text)

cmd.Parameters.AddWithValue("@Res_City", txtrescity.Text)

cmd.Parameters.AddWithValue("@Res_Pincode", txtrespin.Text)

cmd.Parameters.AddWithValue("@Landmark", txtlandmark.Text)

cmd.Parameters.AddWithValue("@Company_Name", txtcompname.Text)

cmd.Parameters.AddWithValue("@Comp_Addr1", txtcompaddr1.Text)

cmd.Parameters.AddWithValue("@Comp_Addr2", txtcompaddr2.Text)

cmd.Parameters.AddWithValue("@Comp_Telno", txtcomptelno.Text)

cmd.Parameters.AddWithValue("@Comp_City", txtcompcity.Text)

cmd.Parameters.AddWithValue("@Comp_Pincode", txtcomppin.Text)

cmd.Parameters.AddWithValue("@Designation", cbodesignation.Text.PadLeft(1, CChar(CStr(1)))) [ help me for inserting designation in this line]

cmd.Parameters.AddWithValue("@creditlimit", txtcreditlimit.Text)

cmd.Parameters.AddWithValue("@Income_Mthly", txtincomemthly.Text)

cmd.Parameters.AddWithValue("@Email_ID", txtemailid.Text)

cmd.Parameters.AddWithValue("@Note", rtxtNote.Text)

cmd.ExecuteNonQuery()

Inventory_Master.cntData.Close()

MsgBox("RECORD SAVED")


View 1 Replies View Related

How To Show The User Selected Values In Page Header By Using Parameters Which I Have Already Created In The Report

Dec 10, 2007

Hi ,

I am working on Sql server Reporting Services(Sql Server 2005),

i have designed a Report and deployed that report on Report Server, on this report i need to show the user selected values
in page header by using Parameters which i have already created in the Report.

There are 35 to 40 fields in the Front End(Asp.net2.0)

on passing all these values from front end Report is prompting for parameters which is not desired for my case even though i have made ShowParameterPrompts to false.



Thanks in advance

Srinivas Govada

View 1 Replies View Related

Learn To Access Stored Procedures With ADO.NET 2.0-VB 2005:How To Work With Output Parameters && Report Their Values In VB Forms?

Feb 11, 2008

Hi all,

In my SQL Server Management Studio Express (SSMSE), pubs Database has a Stored Procedure "byroyalty":

ALTER PROCEDURE byroyalty @percentage int

AS

select au_id from titleauthor

where titleauthor.royaltyper = @percentage

And Table "titleauthor" is:
au_id title_id au_ord royaltyper




172-32-1176
PS3333
1
100

213-46-8915
BU1032
2
40

213-46-8915
BU2075
1
100

238-95-7766
PC1035
1
100

267-41-2394
BU1111
2
40

267-41-2394
TC7777
2
30

274-80-9391
BU7832
1
100

409-56-7008
BU1032
1
60

427-17-2319
PC8888
1
50

472-27-2349
TC7777
3
30

486-29-1786
PC9999
1
100

486-29-1786
PS7777
1
100

648-92-1872
TC4203
1
100

672-71-3249
TC7777
1
40

712-45-1867
MC2222
1
100

722-51-5454
MC3021
1
75

724-80-9391
BU1111
1
60

724-80-9391
PS1372
2
25

756-30-7391
PS1372
1
75

807-91-6654
TC3218
1
100

846-92-7186
PC8888
2
50

899-46-2035
MC3021
2
25

899-46-2035
PS2091
2
50

998-72-3567
PS2091
1
50

998-72-3567
PS2106
1
100

NULL
NULL
NULL
NULL
////////////////////////////////////////////////////////////////////////////////////////////
I try to do an ADO.NET 2.0-VB 2005 programming in my VB 2005 Express to get @percentage printed out in the VB Form1. I read some articles in the websites and MSDN about this task and I am very confused about "How to Work with Output Parameters & Report their Values in VB Forms": (1) Do I need the Form.vb [Design] and specify its properties of the object and classes I want to printout? (2) After the SqlConnectionString and the connection.Open(), how can I bring the value of @percentage to the Form.vb? (3) The following is my imcomplete, crude draft code:

Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes

Public Class Form1

Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=pubs;Integrated Security=SSPI;"

Dim connection As SqlConnection = New

SqlConnection(connectionString)

Try

connection.Open()

Dim command As SqlCommand = New SqlCommand("byroyalty", connection)

command.CommandType = CommandType.StoredProcedure
...................................................................
..................................................................
etc.
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From the above-mentioned (1), (2) and (3), you can see how much I am lost/confused in attempting to do this task. Please help and give me some guidances and good key instructions for getting the output parameter printed out in the FORM.vb in my VB 2005 Express project.

Thanks in advance,
Scott Chang


View 11 Replies View Related

Reporting Services :: Adding Values To Parameters In Dropdown Prompts In Reports In BIDS Or Report Builder

Nov 20, 2015

I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .

ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate

[Code] ....

And for prompts how to create created_by and message_type dropdowns as shown in picture.

View 7 Replies View Related

Report On Access Database Using Parameters In Query

Nov 16, 2007

Hi all,

I am trying to create a report against an Access 2003 database using the provider as follows: "Provider=Microsoft.Jet.OLEDB.4.0;"

Simple reports with no parameters are fine (e.g. using a text query of 'Select * from BERs'

But how do I pass in a report parameter to limit the results coming back ? I have only used stored procs in the past which work fine but how to achieved this using Access has me stumped.

An example query I need would be 'Select * from BERs WHERE Year = [Year?]'

Anyone got any pointers ?

Thanks in advance

Steve

View 7 Replies View Related

Reporting Services :: Selecting Multiple Parameters Values For Comma Separated Values In SSRS?

Jun 17, 2012

I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.

View 5 Replies View Related

SQL 2012 :: Find Out Values Of Parameters When SP Is Executed With Default Values?

May 30, 2014

I am working with SP. How can we find out values of parameters when the SP is executed with the default values?

View 9 Replies View Related

Default Values Does Not Include All The Values (Cascading Parameters)

Mar 18, 2007

A have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.

One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).

If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with  Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.

What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.

 

View 8 Replies View Related

Run Report By Different Parameters Without Having To Enter Information For All Parameters At Same Time

Oct 29, 2013

I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.

View 2 Replies View Related

How Do I Jump To Another Report Based On A Value In My Current Report? Report Has No Parameters.

May 3, 2007

How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.

View 7 Replies View Related

Problem With Store Procedure - Too Much Parameters

Jan 2, 2008

Hi,I actualy have another problem with a store procedure. By runnuing a aspx-Site I was toldthat there were to much parameters given for transfering data to the store procedure. Thisparamter I have:ArtikelID, NewsID, Ueberschrift_D, Ueberschrift_E, Text_D, Text_E all are defined within a <asp:SQLDatasource> as <asp:parameter..> within <UpdateParameters>When I kill all parameters I was told that the @ArtikelID-Parameter was not declarated. If I havedefined all parameters expect the Text_E I was told that the @Text_E-Parameter was not declarated.When I declarate the Text_E-Parameter as last parameter that should be nessessary I get the abovementioned error-message.What can be wrong?Regards     

View 6 Replies View Related

Which File Store Startup Parameters?

Jul 20, 2005

or in registry? where?

View 8 Replies View Related

How To Get Store Procedure's Return Value And Output Parameters From BLL?

Oct 10, 2007

ex:
myprocedure(@Cusname varchar(50), @Cusid int output)as
Insert into Customer(Cusname) values (@Cusname)SELECT @cusid = @@IDENTITY
 i add the query to my adapter called CreatCustomer (@Cusnam,@Cusid)private Merp_CusListTableAdapter _CuslistAdapter = null;protected Merp_CusListTableAdapter Adapter
{
get
{if (_CuslistAdapter == null)
_CuslistAdapter = new Merp_CusListTableAdapter();return _CuslistAdapter;
}
}
Now how i write function in BLL to receive output paramter from creatcustomer function?

View 1 Replies View Related

How To Pass Parameters In Url For A Report Published In Reportserver (report Built On Stocked Procedure) ?

Apr 30, 2007

Hi,



I have created a report with the report server project template.

the report is created from stoked procedure having defaut input parameters.

With visual studio, i publish my report on reportserver. whenever i access to my report on this url :

http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render. the created report is with the default parameters.



I would like to know if i can transmet parameters for the stocked procedure to build the report with the request i want.


I tried to put parameter directly in the url in this way

http://localhost/ReportServer/Pages/ReportViewer.aspx?%2fReport+Project4%2fReport4&rs:Command=Render&@region='toto'

but without success.

my error message is that one

An attempt was made to set a report parameter '@region' that is not defined in this report. (rsUnknownReportParameter)





My stocked procedure is :

set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER procedure [dbo].[akli] @region varchar ='m'
as
select * from dbo.Report2 where region=@region

The request used to buid the report ?
DECLARE @region varchar
EXECUTE dbo.akli @region


What is wrong in that ?

Thanks for your help.

Arioule

View 1 Replies View Related

Passing Report Parameters To An SSRS 2005 Report Hosted In Sharepoint 2007

Nov 18, 2007

Here is a situation in my company:

We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.

But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally.
So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?

View 1 Replies View Related

Reporting Services :: Passing Cascaded Parameters From Main Report To Drill Through Report In SSRS?

Sep 16, 2015

I am trying to develop a report from cube,and it has one drill through report.when i click on sales amount field on main report,then it open the drill through report with details.Here i passed the **(category,subcat,product)parameters(Cascaded)** to drill through report in action part of main report.In my main report i have two columns .

columns are **Level**  and              **Salesamount**.  

Values are like  

**[-]category**              **100**
    **[-]subcat**             **50**
         **product**          **30**

when i click on 100, parameters are passed & it open the detail report correctly, but when i click on 50,the values for subcat parameter is not getting values in detail report and same as the product also.

Here i used the expressions in parameter values

**pCategory**----iif(inscope(category),!fields.category.value,split(join(Parameters!category.value,","),","))

**psubcat**----iif(inscope(subcat),!fields.subcat.value,split(join(Parameters!subcat.value,","),","))

**pproduct**----iif(inscope(product),!fields.product.value,split(join(Parameters!product.value,","),","))

View 3 Replies View Related

Reporting Services :: Way To Subscribe SSRS Report Using Dynamic Parameters For Email And Trigger Report

Feb 8, 2015

Is there a way to subscribe SSRS report using dynamic parameters for email and trigger the report from autosys job so that report should generate the exact time the job is triggered.Let me describe, my SSRS report should be triggered on success of one autosys job. i need to send email parameter and time of report schedule from this autosys job.

View 3 Replies View Related

Need To Store Duplicate Values To DB

May 7, 2007

Hi,I have written a stored procedure to store values from a report i generated to the DB. Now there is a column PKID which is the primary key but also needs to be repeated at times. I tried to clear the memory that the same PKID has already been entered for which I wrote another SP.  SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[spCRMPublisherSummaryUpdate](    @ReportDate smalldatetime,    @SiteID int,    @DataFeedID int,    @FromCode varchar,    @Sent int,    @Delivered int,    @TotalOpens REAL,    @UniqueUserOpens REAL,    @UniqueUserMessageClicks REAL,    @Unsubscribes REAL,    @Bounces REAL,    @UniqueUserLinkClicks REAL,    @TotalLinkClicks REAL,    @SpamComplaints int,    @Cost int)ASSET NOCOUNT ON    DECLARE @PKID INTDECLARE @TagID INTSELECT @TagID=ID FROM Tag WHERE SiteID=@SiteID AND FromCode=@FromCodeSELECT @PKID=PKID FROM DimTag WHERE TagID=@TagID AND StartDate<=@ReportDate AND @ReportDate< ISNULL(EndDate,'12/31/2050')IF @PKID IS NULL BEGIN    SELECT TOP 1 @PKID=PKID FROM DimTag WHERE TagID=@TagID AND SiteID=@SiteIDDECLARE @LastReportDate smalldatetime, @LastSent INT, @LastDelivered INT, @LastTotalOpens Real, @LastUniqueUserOpens Real, @LastUniqueUserMessageClicks Real, @LastUniqueUserLinkClicks Real, @LastTotalLinkClicks Real, @LastUnsubscribes Real, @LastBounces Real, @LastSpamComplaints INT, @LastCost INT SELECT @Sent=@Sent-Sent,@Delivered=@Delivered-Delivered,@TotalOpens=@TotalOpens-TotalOpens,@UniqueUserOpens=@UniqueUserOpens-UniqueUserOpens,@UniqueUserMessageClicks=@UniqueUserMessageClicks-UniqueUserMessageClicks,@UniqueUserLinkClicks=@UniqueUserLinkClicks-UniqueUserLinkClicks,@TotalLinkClicks=@TotalLinkClicks-TotalLinkClicks,@Unsubscribes=@Unsubscribes-Unsubscribes,@Bounces=@Bounces-Bounces,@SpamComplaints=@SpamComplaints-SpamComplaints,@Cost=@Cost-Cost    FROM CrmPublisherSummary        WHERE @LastReportDate < @ReportDate        AND SiteID=@SiteID        AND TagPKID=@PKIDUPDATE CrmPublisherSummary SET    Sent=@Sent,    Delivered=@Delivered,    TotalOpens=@TotalOpens,    UniqueUserOpens=@UniqueUserOpens,    UniqueUserMessageClicks=@UniqueUserMessageClicks,    UniqueUserLinkClicks=@UniqueUserLinkClicks,    TotalLinkClicks=@TotalLinkClicks,     Unsubscribes=@Unsubscribes,    Bounces=@Bounces,    SpamComplaints=@SpamComplaints,    Cost=@Cost,    TagID=@TagID    WHERE ReportDate=@ReportDate        AND SiteID=@SiteID        AND TagPKID=@PKIDENDELSE        INSERT INTO CrmPublisherSummary(    ReportDate, SiteID, TagPKID, Sent, Delivered, TotalOpens, UniqueUserOpens,     UniqueUserMessageClicks, UniqueUserLinkClicks, TotalLinkClicks, Unsubscribes,     Bounces, SpamComplaints, Cost, DataFeedID, TagID)         VALUES(    @ReportDate, @SiteID, @PKID, @Sent, @Delivered, @TotalOpens, @UniqueUserOpens,     @UniqueUserMessageClicks, @UniqueUserLinkClicks, @TotalLinkClicks, @Unsubscribes,     @Bounces, @SpamComplaints, @Cost, @DataFeedID, @TagID)SET NOCOUNT OFF this is the one to clear: SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER proc [dbo].[spCRMPublisherSummaryClear](     @SiteID INT,     @DataFeedID INT,     @ReportDate SMALLDATETIME) AS    DELETE LandingSiteSummary        WHERE SiteID=@SiteID AND ReportDate=@ReportDatebut it doesnt seem to be working.Please suggest. 

View 2 Replies View Related

Best Way To Store Simple Up Or Down Values

Jul 20, 2005

I'm creating a table for maintenance records.In each record, many of the values are simply checkboxes (on the UI).In the database table for these attributes, is a good way to store thestate of these checkboxes as simple as 0 for false, 1 for true?-David

View 6 Replies View Related

How To Store Values During Dataflow

Aug 2, 2007

The point is, i want to calculate the max id of a table using Aggregate Transformation, then insert some rows with a OLEDB Command and finally , with another OLEDB Command select those rows with id >(max_id) calculated before.

How can i get a value that was calculated before? Can i store it in a variable?

Many Thanks!

View 5 Replies View Related

How Do I Enter In A Default Values For A Report Parameter That Accepts Multi Values

Apr 11, 2008



I have my stored procedure set to
Territory_code IN (@Territory)

, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?

The field is a Varchar 20

View 1 Replies View Related

How To Pass Parameters From Report Viewer To Report Server

Mar 28, 2008

Hi,

I am having hard time in sending parameters to the report server through reportviewer control from my application. Could anybody help me on this issue?. Is there any way to send the parameters and also what kind of configuration do i need on my report project so that it can accept parameters from my application.


Thanks,

View 9 Replies View Related

Pass The Parameters From Main Report To Drillthrough Report

Nov 28, 2007

Good morning, all

I have a really cool Budget report which has two matrices on it. One is used/visible if the user selects four levels of grouping, and one is used if the user selects only three levels of grouping. The four choices for grouping are four fields, Par, FERC, Point, and Resource.

Since grouping is optional, I need a way to pass the parameter for a field that is not grouped on from the main report to the drillthrough report. For example if the user chooses to group on all fields but Point, I need to pass the report parameter that was used by the main report for Point to the drillthrough report as a report parameter.

So, I tried testing the three grouping levels values and if none were equal to "Point" then pass in the parameter by putting the following expression in the Parameter Value box for the Point parameter on the Navigation tab of the datacell of the main report that is the drillthrough link:


=iif(
Parameters!GroupLevel1.Value <> "Point"
and
Parameters!GroupLevel2.Value<>"Point"
and
Parameters!GroupLevel3.Value<>"Point"
,
Join(Parameters!PNTPoint.Value,",")
,
Fields!Point.UniqueName
)

But this is not working; the drillthrough report shows a blank dropdown for the Point parameter and I have to manually set it. Does anyone see an error in the syntax of the iif statement?

Any references, links, resources or good clean jokes would be greatly appreciated.

Thanks,
Kathryn

View 1 Replies View Related

Parameters Filtering In Report Server Project Report.

Oct 22, 2007

Dear All,

Is it possible to poplulate some control like Dropdownlist (for example, with Product names Or Product Ids) from database table in SSRS project type and then filter report by choosing various choice pre-populated in dropdownlist control.

Project Type is : SQL Server Reportings 2005.

Desired Action: Report will run in browser, User will choose specific product and Run the report(filter) to show that product relate results.

any help,

Thanks,

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved