Store Ouput From Select Statement
Aug 25, 2004I am running a select statment which retruns one row how I can assign that results to a memory variable ?
thanks
ADVERTISEMENT
Saving Store Procedure Ouput Into A Table
Feb 22, 2001Does anyone know how to save the output of a stored procedure into a table? I would like to be able to use some procedures such as the sp_helpfile and dbcc sqlperf(logspace) and save to output into a table. Does anyone have any ideas?
View 2 Replies View RelatedOuput Parameter In "select * From @tablename"
Aug 30, 2000Hi all.
I want something like this :
create proc myProc ( @num int ,@name varchar(80))
as
select @num = max(field1) from @name
but there is a problem that the @name is a varchar and the error is :
Server: Msg 170, Level 15, State 1, Procedure sp_myProc, Line 3
Line 3: Incorrect syntax near '@name'.
I tried
select @num = max(field1) from object_id(@name)
and the error was the same
is ther another way than :
exec ("declare @num int select @num = max(field1) insert into anotherTable values( @num) " ) ?
thx
Eyal Peleg
Print A Select Statement Within A Store Procedure
May 8, 2008I want to create store procedure which will print out something like this:
Insert into [dbname].dbo.[gameBooks] value (@gameBookID, gameBookTitle, ganeVolumn)
But first one print out good, as I expected. I either got nothing or the error message on second piece.
Msg 245, Level 16, State 1, Line xxx
Conversion failed when converting the varchar value 'Insert into [dbname].dbo.[cookBooks] value (' to data type int.
Any Help will be greatly appreciated.
on SQL 2005 SP1.
Here is my example code (not the real one):
Create Procedure [dbo].[makeNewString]
@myBookID
As
Declare bookID int
Declare newRowID int
Declare insertBookInfoString nvarchar(150)
select 'Declare @newBookID int'
Set insertBookInforString =
(Select 'Insert into [dbname].dbo.[gameBooks] value (' + @gameBookID + ',' + gameBookTitle +',' + ganeVolumn +')'
from [dbname].dbo.[gameBooks])
where @gameBookID=@myBookID
Print insertBookInforString
select 'SET @newRowID = Scope_Identity()'
print @newRowID
select 'Declare @newBookID int'
Set insertBookInforString =
(Select 'Insert into [dbname].dbo.[cookBooks] value (' + @cookBookID +',' + cookBookTitle +','+cookVolumn+')'
from [dbname].dbo.[cookBooks]
where @cookBookID=@myBookID)
Print insertBookInforString
first insertBookInfoString prints out fine.
But I kept this error on second part:
------------------------------
DECLARE Declare @newBookID int
(1 row(s) affected)
Insert into [dbname].dbo.[gameBooks] value (@gameBookID, gameBookTitle, ganeVolumn) (this is what I want)
-----------------------------------------
SET @newBookID = Scope_Identity()
(1 row(s) affected)
Msg 245, Level 16, State 1, Line xxx
Conversion failed when converting the varchar value 'Insert into [dbname].dbo.[cookBooks] value (' to data type int.
SQL 2012 :: Store Procedure Only Output One Select Statement
May 28, 2014There are about 10 select statements in a store procedure.
All select statements are need.
Is it possible to output only the result of last select statement?
How Do You Use Data From A Select Statement As Inputs For A Store Procedure?
Dec 13, 2007How do you use data from a select statement as inputs for a store procedure?
e.g.
Code Block
Select FirstName, LastName from Student where Grade = 'A'
And I want to use all the FirstName and LastName as inputs for this store procedure
Code Block
Exec StudentOfTheMonth @FirstName = FirstName, @LastName = LastName
Thanks
How To Write A SELECT Statement And Store The Result In A Session Variable
Nov 6, 2007I'm sure this is a very simple piece of code, but I'm having trouble understanding how to do this.
First I have a database with three columns
ContactID
Select Statement Within Select Statement Makes My Query Slow....
Sep 3, 2007Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
Ouput Of Difference In Two Strings
Oct 31, 2005Hi, I need an ouput of difference in two Strings
Declare @StringA varchar(100), @StringB varchar(100)
@StringA = 'A,B,C'
@StringB = 'A,C,C'
The values are seperated in the strings by ','
Since B value in first string changed to C value in the second string
I want to return the difference between the two strings as 'B,C'
Can anyone help me with this.
Thanks
Multiple Ouput Parameter
Aug 8, 2007is it possible to return multiple output values in stored prcodeure
for eg.
Create Proc XYZ
( @x int output,@y int output,@z int ouput)
As
Begin
SET @X= Select from table
SEt @Y=SELECT from table
set @z=slect from table
end
Ouput Based On Order Date
Jun 2, 2008Hi all,
I have 2 tables, Order and Payment
Order
Order_NumberCust_NumberOrder_Date
10001 C1 23-May
10002 C2 24-May
10003 C1 25-May
10004 C3 28-May
Payment
Order_Number|Card_Type|Card_#|Merchant
10001 Gift Card1234null
10001 Gift Card1235null
10001 Gift Card 1236null
10001 Credit Cardxxxxprd
10002 Credit Cardxxxxprd
10003 Credit Card xxxxprd
10004 Credit Card xxxx prod
I have to populate th below table to track last gift card used for each cust_number.
1. last gift card used for each customer, each order
2. In a single order , if card used is gift card, last gift card used is gift card itself. if card used is a credit card, then the max gift card number from with in the order.
3. First time if a customer uses a credit card, then last gift card used is defaulted to 99 for merchant = prd and 88 for merchant = prod
4. In a new order, a past customer only uses a gift card, then last gift card used is gift card from his previous order.
[b]Last_Gift_Card
Cust_No|Order_number|card_number|last_gift_card
C11000112431234
C11000112351235
C11000112361236
C110001xxxx1236
C210002xxxx99
C110003xxxx1236
C310004xxxx88
Please help me with the sql.
I tried this using subqueries to find the max gift card for a customer for an order and could get the last gift card used correctly for credit cards for an order, but not able to insert the gift card from a previous order if the new order has only credit card as in for customer C1.
Thanks.
Getting Column Name When Processing Error Ouput
Nov 10, 2006I am working on a SSIS package. I want error records to be redirected to a different table. Natively, the package passes the Error Code and Column Code (don't know what to call it, but it's a number). I found a script to get the error description, but can't find an equivalent to get the Column name.
Any ideas?
Row.ErrorDescription = _
Me.ComponentMetaData.GetErrorDescription(Row.ErrorCode)
Connect Multi Parameter To Ouput
May 31, 2007I'm just starting to get a handle on parameters. I now want to create a parameter that is "multi-value". How do I get this to work? I have the report parameter set up, I just don't know how to actually get the report to use it.
Does it go in my dataset query? ie select 1,2,3 from table where 1 = @1
if so, how do you do this for a multi?
Store Proc - All Where Statement For Int
Nov 3, 2000Hey,
How do I put anything there for an INT type???
It is in a stored procedure and I have six parameters that I am passing in, some are blank and I want to put a default all variable in the where statement.
Select tbl_EventDate.EventDate , tbl_EventDate.EventDateID_p FROM tbl_EventDate WHERE EventDateID_p = %
This does not work.... I tried * too..... hmmmm....
How To Use The Data From A Store Procedure Within A SQL Statement?
Dec 6, 2007Is it possible to do something like this?
SELECT * from (
exec Store_Procedure
)
--StartDate is a column from "Store_Procedure"
where StartDate >= @Param
Creating A SQL Statement Store Procedure
Sep 28, 2007
I'm trying to do this:
CREATE PROCEDURE [dbo].[spStoryDisplay]
-- Add the parameters for the stored procedure here
@clsYear int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
SELECT *, "Class Year" =
CASE
WHEN year1 >= 1940 AND year1 < 1950 THEN '1940s'
WHEN year1 >= 1950 AND year1 < 1960 THEN '1950s'
WHEN year1 >= 1960 AND year1 < 1970 THEN '1960s'
WHEN year1 >= 1970 AND year1 < 1980 THEN '1970s'
WHEN year1 >= 1980 AND year1 < 1990 THEN '1980s'
WHEN year1 >= 1990 AND year1 < 2000 THEN '1990s'
WHEN year1 >= 2000 AND year1 < 2010 THEN '2000s'
END
FROM dvlStory
WHERE "Class Year" = @clsYear
ORDER BY lstName ASC
END
I kept getting this error:
Msg 207, Level 16, State 1, Procedure spStoryDisplay, Line 27
Invalid column name 'Class Year'.
So, my question is, how do I compare to the additional column "Class Year" to the parameter?
Multiple Tables Used In Select Statement Makes My Update Statement Not Work?
Aug 29, 2006I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedSQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement
Jan 9, 2015Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
Using Conditional Statement In Stored Prcodure To Build Select Statement
Jul 20, 2005hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedTSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement
Oct 29, 2007Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
Create Multiple Store Procedures In 1 SQL Statement
Nov 17, 2006Hi guys , may I know is that possible to create multiple store procedures in 1 time using 1 SQL statement? Thx for the assistance.
Best Regards,
Hans
How To Write Select Statement Inside CASE Statement ?
Jul 4, 2006Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
Transact SQL :: Update Statement In Select Case Statement
May 5, 2015I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
How Can I Post Back A Statement From A Store Procedure To The .aspx Page
Oct 17, 2005Hi all,Anyone can show me how can I catch the 'Print' statement that I have defined in my store procedure using SQL server 2000 DB on the .aspx page? ( I am using ASP.NET 1.0)My store procedure as follow:CREATE PROC NewAcctType(@acctType VARCHAR(20))ASBEGIN --checks if the new account type is already exist IF EXISTS (SELECT * FROM AcctTypeCatalog WHERE acctType = @acctType) BEGIN PRINT 'The account type is already exist' RETURN END
BEGIN TRANSACTION INSERT INTO AcctTypeCatalog (acctType) VALUES (@acctType)
--if there is an error on the insertion, rolls back the transaction; otherwise, commits the transaction IF @@error <> 0 OR @@rowcount <> 1 BEGIN ROLLBACK TRANSACTION PRINT 'Insertion failure on AcctTypeCatalog table.' RETURN END ELSE BEGIN COMMIT TRANSACTION ENDENDThanks for all your replies
SQL Server 2012 :: Input Parameter For Store Procedure Like In Statement Value 1 / Value 2
Jun 20, 2014How can I input parameter for Store Procedure like In ('Value1','Value2')
Example :
Create procedure GetUsers
@Users nvarchar(200)
as
Select * from Users where UserID in (@Users)
How To Use Select Statement Inside Insert Statement
Oct 20, 2014In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
Help With Delete Statement/converting This Select Statement.
Aug 10, 2006I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Select Statement Problem - Group By Maybe Nested Select?
Sep 17, 2007Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedHow To Select In From A Store Procedure Result?
Feb 26, 2007HI, I'm a simple store procedure that returns a result such as this one:
AM
AM-1
AM-2
AM-n
and in other store procedure I need to filter result from this list.
I think that some query like this is impossibile
select fields from table where id in (execute sp)
how can I make this?
Thanks a lot.
SQL Server 2008 :: Store Long Values To Be Used In (IN) Statement In Separate Table?
Jul 14, 2015I have several reports that are looking for a code within a certain set of codes or ranges. The specific list of codes to be including is determined by the end user. Currently my "IN" statement can be a hundred lines, listing several ranges, lists of specific codes, etc. I am constantly getting asked what codes does it include, is this code included, etc. Sometimes they'll give me a printed 10 page list of codes and want me to compare to what I have included in the report. Not ideal in the slightest.
What I'd like to do is have a table or a file of some kind somewhere where the end user can view the codes contained, add new ones, and delete ones they no longer want. Then I'd like to be able to just reference that file in my IN statement. Leaving the responsibility of listing the correct codes on them.
Store Proc Question - Select Top @NbrItems
Aug 31, 2004I try to get the TOP of the query but SQL do not allow me to do so. Is there a way to do this.
thanx
===============
Incorrect syntax near '@NbrItems'. Line 14
===============
create procedure NewsList
@ModuleID int,
@NbrItems int
as
if @NbrItems = 0
select * from TblNews where ModuleID = @ModuleID order by CreationDate DESC
else
select top @NbrItems * from TblNews where ModuleID = @ModuleID order by CreationDate DESC
GO
EXECUTING STORE PROCEDURE IN SELECT STATMENT
Aug 27, 2001hI
DOES ANY BODY KNOW HOW TO EXECUTE STORE PROCEDURE IN SELECT STATMENT
THANKS
jk
T-SQL (SS2K8) :: Adding N Prefix In Update Statement In Order To Store The Text Correctly?
Sep 4, 2014The FirstName and LastName values being passed in are in cyrillic text.
How do I add the N prefix in the update statement in order to store the text correctly.
I've tried FirstName = N@Firstname
or FirstName = '''N''' + @FirstName + '''
[dbo].[sp_UpdateDealerPeopleInfo](
@PersonId char(9),
@OriginalSID char(9),
@FirstName Varchar(50),
@LastName Varchar(50),
[code].....