Stored Proc - Unknown Parameters
Jan 24, 2007If a procedure is known but all parameters are not known, can I handle this using CommandBehavior.RetrieveParameters.
If yes, do I need to incur an extra round trip to server.
ADVERTISEMENT
Optional Parameters In A Stored Proc?
May 19, 2004Title speaks for itself really.
Is it possible to write a stored proc with optional parameters?
For example consider the following SELECT
SELECT FLD1, FLD2 FLD3 FROM TBL1
I'd like to add optional parameters to that statement so that if they wanted to narrow down the results by providing criteria for some fields they could - but didn't have to.
Is this possible?
Passing Parameters To Stored Proc
Oct 23, 2007
I have created a stored proc for a report, which works fine. I want to have the user enter a project ID to filter the report, so set the stored proc accordingly. However, I want the user to enter a 10 digit ID, which is the equivilent of two fields in the stored proc. My where statement is :
Where actv.ProjID + '-' + actv.Activity = @project
This works fine under the data tab, I can enter a full project and get the results I want. But I cannot preview the report without getting an error. I'm not sure how to add this to the report parameters, as it is two fields concatenated together. Any help would be appreciated!
Stored Proc Update Optional Parameters
Dec 3, 2003I have a stored procedure that updates about a dozen rows.
I have some overloaded functions that I should update different combinations of the rows - 1 function might update 3 rows, another 7 rows.
Do I have to write a stored procedure for each function or I can I handle it in the Stored Procedure. I realise I can have default values but I the default values could overwrite actual data if the values are not supplied but have been previously written.
Many thanks for any guidance.
Simon
Stored Proc Parameters Slowing Down Execution Majorly!
Jan 15, 2008Hello:
Interestingly enough, I haven't come across this before. I have a SQL stored procedure which takes four parameters; periodstartdate (datetime), periodenddate (end time), hsgradyearstart (int), hsgradyearend (int)
[dbo].[CalculateActivityTotal]
-- Add the parameters for the stored procedure here
@periodstartdate datetime = '2007-01-01',
@periodenddate datetime = '2007-01-08',
@hsgradyearstart int = 1900,
@hsgradyearend int = 2007
AS...
If I run the stored procedure and pass the parameters using EXEC or
sp_executesql "CalculateActivityTotal '2008-01-04 12:00:00', '2008-01-11 12:00:00', 1900, 2008"
the stored proc takes well over ten minutes to run (it does a bunch of aggregation). If I modify the stored procedure to take no parameters, however, and I hardcode the dates in the stored proc using declare and set then it runs in 13 seconds. What could be causing my problem and how I can I go about resolving this? I need to pass the parameters via reporting server. Thanks!
Convert Dynamically Generated Parameters List Into Stored Proc
Mar 17, 2006I have the following ASP code that builds part of the example SQL statement below (it's the same SQL as in my earlier thread here (http://www.dbforums.com/showthread.php?t=1214044) but a very different question):
if sFindTicketEventId > 0 then sSQL = sSQL & " AND [tblEvents].[id]=" & sFindTicketEventId
if sFindTicketStandId > 0 then sSQL = sSQL & " AND [tblStands].[id]=" & sFindTicketStandId
SELECT
[tblC].[id] AS CombinationID,
[tblC].[availability],
[tblC].[description],
[tblC].[price] AS combinationPrice,
[tblC].[combination_open],
[tblT].[TicketID] AS TicketID,
[tblT].[price] AS ticketPrice,
[tblT].[availability],
[tblT].[ticket_open],
[tblT].[quantity],
[tblT].[event_name],
[tblT].[event_open],
[tblT].[stand_name],
[tblT].[stand_open],
[tblT].[admission_start_date],
[tblT].[admission_end_date],
[tblT].[date_open],
[tblT].,
[tblT].,
[tblT2].[description],
[tblT2].[admin_description]
FROM(
SELECT
[tblCombinations].[id],
[tblTickets].[id] As TicketID, [tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
FROM [tblCombinations]
LEFT JOIN [tblCombinations_Tickets] ON [tblCombinations_Tickets].[combination_id] = [tblCombinations].[id]
LEFT JOIN [tblTickets] ON [tblCombinations_Tickets].[ticket_id] = [tblTickets].[id]
LEFT JOIN [tblEvents] ON [tblEvents].[id] = [tblTickets].[event_id]
LEFT JOIN [tblStands] ON [tblStands].[id] = [tblTickets].[stand_id]
LEFT JOIN [tblAdmissionDates] ON [tblAdmissionDates].[id] = [tblTickets].[admission_date_id]
LEFT JOIN [tblBookingDates] ON [tblBookingDates].[id] = [tblTickets].[booking_date_id]
LEFT JOIN [tblTicketConcessions] ON [tblTicketConcessions].[id] = [tblTickets].[ticket_concession_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMinQuantities] ON [tblBookingMinQuantities].[id] = [tblTickets].[booking_min_quantity_id]
LEFT JOIN [tblBookingQuantities] AS [tblBookingMaxQuantities] ON [tblBookingMaxQuantities].[id] = [tblTickets].[booking_max_quantity_id]
LEFT JOIN [tblMemberships] ON [tblMemberships].[id] = [tblTickets].[membership_id]
WHERE 1=1
[B]AND [tblEvents].[id]=2
[B]AND [tblStands].[id]=3
--AND [tblAdmissionDates].[id]=@admissionDateId
--AND [tblBookingDates].[id]=@bookingDateId
--AND [tblTicketConcessions].[id]=@concessionId
--AND [tblBookingMinQuantities].[id]=@bookingMinQuantityId
--AND [tblBookingMaxQuantities].[id]=@bookingMaxQuantityId
--AND [tblMemberships].[id]=@membershipId
GROUP BY
[tblCombinations].[id],
[tblTickets].[id],
[tblTickets].[price], [tblTickets].[availability], [tblTickets].[ticket_open],
[tblCombinations_Tickets].[quantity],
[tblEvents].[event_name],
[tblEvents].[event_open],
[tblStands].[stand_name],
[tblStands].[stand_open],
[tblAdmissionDates].[admission_start_date],
[tblAdmissionDates].[admission_end_date],
[tblAdmissionDates].[date_open],
[tblBookingDates].[booking_start_date],
[tblBookingDates].[booking_end_date]
) as [tblT]
JOIN [tblCombinations] as [tblC] on [tblT].[id]=[tblC].[id]
LEFT JOIN [tblTickets] as [tblT2] on [tblT].[TicketID]=[tblT2].[id]
I want to turn this SQL into a stored proc; there are currently about 8 parameters that I want to pass into it. The field value for each will be either NULL or a positive integer, and the paramater will be passed in as an integer.
If the passed parameter value is a positive integer then it should return all records where the corresponding field value matches that integer. If the passed parameter is 0, it should return all rows regardless of whether the field value is an integer or NULL.
And I can't for the life of me figure out how to do it. Do I need an IF statement in there or something?
:confused:
Passing A Comma Delimited String Of Parameters To A Stored Proc
Jul 30, 2007Hello,
I have a number of multi-select parameters which I would like to send to a stored procedure within the dataset for use in the stored procedure's IN() statement which in turn is used to filter on or out particular rowsets.
I considered using a hidden string parameter set = " ' " + join(parameter.value, ',') + " ' " so that the hidden parameter would then contain a comma delimiated string of the values selected, which would then be sent on to the stored proc and used in the WHERE clause of one of the queries internal to the stored proc.
But before I start dedicating time to do this I wanted to inquire if anyone here with far more expertise could think of a faster or less system heavy method of creating a single string of comma delimited parameter selections?
Thanks.
Unknown Ammount Of Parameters, Parameterized Statement/split Strings In Transact Sql
Oct 26, 2007Hello,
Is there any way to run a parameterized statement against SQL when you have an unknown ammount of inputs.
Instead of doing the following:
FOR i as integer = 0 to topValuestrWhere &= " OR myColName='"& myArr(i) &"'"
NEXT
wash up the string and submit this to SQL, I want to do it with parameters. I'm calling a sproc in SQL and I would prefer just to send in a string like "1,4,42',45" in a parameter split that in SQL and run my query.The query would be something like "...WHERE myColname=1 OR myColname=2 OR myColName=3" I only want to declare one parameter and not use string concatenation as described above.It doesn't matter if there's a split function in SQL or not, as long as it solves my problem in an efficient manner. Cheers!/Eskil
Can You Trace Into A Stored Proc? Also Does RAISERROR Terminate The Stored Proc Execution.
Feb 13, 2008I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
Unknown Members In Report Parameter Causes CONSTRAINED Flag Error In STRTOSET Function When NullProcessing Unknown Member
May 1, 2007 Hi,
I'm using MS Report Designer 2005 and have created a report that uses a cube, with a dimension set up to convert null values to unknown (nullProcessing = UnknownMember).
When I create a parameter using the checkbox in the graphical design mode's filter pane, Report Designer automatically sets the constrained flag, eg:
STRTOMEMBER(@DimOrganisationBUSADDRSTATE, CONSTRAINED).
When running the report and selecting the 'Unkown' value from the parameter list, the error 'the restrictions imposed by the CONSTRAINED flag in the STRTOSET function were violated' occurrs.
How can I prevent the constrained flag from being used, or am I doing something wrong with converting null values to 'Unknown'?
Thanks
Drop Tables With Unknown Names And Unknown Quantity
Jul 20, 2005This is what I want to do:1. Delete all tables in database with table names that ends with anumber.2. Leave all other tables in tact.3. Table names are unknown.4. Numbers attached to table names are unknown.5. Unknown number of tables in database.For example:(Tables in database)AccountAccount1Account2BinderBinder1Binder2Binder3.......I want to delete all the tables in the database with the exceptionof Account and Binder.I know that there are no wildcards in the "Drop Table tablename"syntax. Does anyone have any suggestions on how to write this sqlstatement?Note: I am executing this statement in MS Access with the"DoCmd.RunSQL sql_statement" command.Thanks for any help!
View 2 Replies View RelatedStored Proc - Calling A Remote Stored Proc
Aug 24, 2006I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
Stored Proc Question : Why If Exisits...Drop...Create Proc?
Jun 15, 2006Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies View RelatedASP Cannot Run Stored Proc Until The Web User Has Run The Proc In Query Analyzer
Feb 23, 2007I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies View RelatedStored Procedure With Unknown Numer Of Paramters, How?
Mar 29, 2006I have one table with categoriestblCategoriescat_id | cat_name-----------------1 | cat 12 | cat 23 | cat 34 | cat 45 | cat 56 | cat 6and one table with projects which relates to tblCategoriestblProjectsproj_id | proj_name | cat_id----------------------------1 | proj 1 | 22 | proj 2 | 23 | proj 3 | 34 | proj 4 | 2How would you create stored procedure for searching some string infiled proj_name but within multiple categoriesfor exampleCREATE PROCEDURE [spSearch](@SEARCH_STRING nvarchar(200),@CAT_ID int)ASBEGINSELECT proj_idFROM tblProjectsWHERE (proj_name LIKE '%' + @SEARCH_STRING + '%') AND (cat_id =@CAT_ID)ENDBut that one works only with one categorie and i need to search for oneor more categories at once, does anyone have a solution? Is theresomething like ellipsis (...) in C++ for MSSQL?
View 7 Replies View RelatedCalling A Stored Proc From Within Another Stored Proc
Feb 20, 2003I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
Stored Proc Calls Another Stored Proc
Jan 13, 2006Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
Calling Stored Proc B From Stored Proc A
Jan 20, 2004Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
Calling T SQL Stored Proc From CLR Stored Proc
Aug 30, 2007I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
Giving A Proc Database And Table Names As Parameters
Jan 10, 2007Hello!Is it possible to pass a stored procedure a parameter, say @table anduse it as a table in the sql command?Finally i want a proc to copy tables from a database to another database.THERE IS MY CODE:CREATE PROCEDURE [user].[copytable]@dbSRC varchar(100),@dbTRGT varchar(100),@table varchar(100)ASBEGIN TRANSACTION FreeAndCopyTableTRUNCATE TABLE [@dbTRGT].admin.[@table]INSERT INTO [@dbTRGT].admin.[@table]SELECT *FROM [@dbSRC].admin.[@table]COMMIT TRANSACTION FreeAndCopyTableIF @@error <0 GOTO E_Copy_FailE_Copy_Fail:ROLLBACK TRANSACTION FreeAndCopyTableGOthanks in advance,muh
View 2 Replies View RelatedData Driven Sub Calling Proc With Multiple Parameters
Aug 31, 2007I have a couple of questions that I hope someone might be able to provide some direction on.
1. Why can't you call a proc when the proc uses temp tables? I wrote a simple proc (select * from table) and the data subscription works perfect. I then take that same query and put it into a temp table and the data set can't be validated by the subscription, Why?
2. Why can't you pass a simple execute statement in a data subscription? (execute dbo.RptTakeTheLeadFLSDinnerCompetition @FiscalQuarter ='2007-Q3', @StoreRegionID = '9231', @StoreType = 'Full-Line Store') works perfect in SQL but once you try and validate in the data subscription is fails.
3. Another question, why if I dumb down the proc and the number of parameters does it work? Are there limitations on the number of parameters you can pass into a proc from a data driven subscription?
Basically, I want to declare a few variables dynamically and pass them into a execute statement that calls the proc. Which in turn runs the report.
Any ideas on where I seem to be going wrong?
ADO.NET 2-VB 2005 Express Form1:Printing Output Of Returned Data/Parameters From The Parameters Collection Of A Stored Procedure
Mar 12, 2008Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
User 'Unknown User' Could Not Execute Stored Procedure - Debugging Stored Procedure Using Visual Studio .net
Sep 13, 2007Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
Execute Stored Procedure Y Asynchronously From Stored Proc X Using SQL Server 2000
Oct 14, 2007I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies View RelatedHow Can I Call One Or More Stored Procedures Into Perticular One Stored Proc ?
Apr 23, 2008Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
Calling A Stored Procedure From Within A Stored Proc
Dec 18, 2007Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
Any and all help appreciated.
Kal
Under Which Filegroup Are Stored Proc. Stored?
Aug 23, 2007When you create a Stored procedure, is it automatically stored under the default Filegoup?
How can I see under which Filegroup my Stored Procedures and Triggers are stored?
FoxPro Triggers Call FoxPro Stored Proc Calls SQL Server Stored Procedure
Mar 10, 2005I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
Sql And Stored Proc
Jul 19, 2007Im trying to perform an update with a stored procedure thats all working but
an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key
I understand whats going on but how do you update some ones details if its protected this way.
?
Help With SQL Stored Proc
Feb 22, 2008I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE) )BEGIN SET @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT @attendanceID = SCOPE_IDENTITY()ENDGO Kindly help with this
View 5 Replies View RelatedSQL Stored Proc
Jan 15, 2004Hi,
I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,
I want to create a Geneirc search Proc that can handle a few criteria
I was wondering if it is possible to create a VB like Select case
depending on Information supplied to the stored proc
i.e
@Loc_Thing
@Loc_OtherThing
SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE
Select case @Loc_Thing
Case "Mickey"
LastName = @Loc_OtherThing
Case "Walt"
Company = @Loc_OtherThing
...... etc
is it possible to create a strored proc like this?
I have found a Select case in SQL, but it doesn't work I would like it?
Any Idea's?
My First Stored Proc
Nov 29, 2004Hello,
So I created my first SP today which returned data to populate a datagrid. Worked to perfection. Now I'm trying to do a simple login and I'm having a hard time getting it together. I want the user to enter in a username and pass then if user exists, to return their userid and update their last login date. But I can't get it. Any help would be awesome.
Here's my SP...
CREATE PROCEDURE [dbo].[userLogin] @username varchar(50), @pass varchar(50) AS
declare @x int
declare @userid int
if exists (SELECT userid FROM users WHERE username = @username AND password = @pass)
set @x = 1
else
set @x = 0
if @x = 1
UPDATE users SET lastlogin = getdate() WHERE userid = (SELECT userid AS name FROM users WHERE username = @username AND password = @pass)
else
return '0'
if @x = 1
SET @userid = (SELECT userid FROM users WHERE username = @username AND password = @pass)
return @userid
GO
Any constructive criticism on my SP is welcome. Also, should I be using Print or Return if I want to send back a value to my VB code?
And my VB:
Dim user As String = txtUsername.Text
Dim pass As String = txtPassword.Text
Dim objDataSet As DataSet
Dim objAdapter As SqlDataAdapter
Try
Dim cmd As New SqlCommand
'Enter Param's here
Dim myParam1 As SqlParameter = cmd.Parameters.Add("@username", SqlDbType.VarChar)
Dim myParam2 As SqlParameter = cmd.Parameters.Add("@pass", SqlDbType.VarChar)
myParam1.Value = user
myParam2.Value = pass
objAdapter = New SqlDataAdapter
objAdapter.SelectCommand = cmd
objAdapter.SelectCommand.Connection = SqlConn
objAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
objAdapter.SelectCommand.CommandText = "userLogin"
SqlConn.Open()
Dim str As String = cmd.Parameters("@userid").Value()
cmd.ExecuteNonQuery()
If str = "0" Then
'Error Login Page
Response.Redirect("login_err.aspx")
Else
Session("userid") = str
Response.Redirect("home.aspx")
End If
SqlConn.Close()
Catch ex As SqlException
SqlConn.Close()
End Try
Need Help With Stored Proc
Feb 13, 2006I have 2 tables, lets say: Table1 and Table2.
Table1 has an ID field that is unique (PK).
Table2 has the same ID field and a date field which are both
unique (PK, FK)
I need to write a stored procedure that will query the ID
field from table1 like
Select distinct(id) from Table1
Would return:
ID
1
2
3
4
5
Now on the first of every month I want a job to run that
would create a new record for EACH ID from the above query. The new record would be created in Table2
with the ID and a date (that I will determine), resulting in:
ID DATE
1 01/01/06
2 01/01/06
3 01/01/06
4 01/01/06
5 01/01/06
The following month, after running it again, the table would
look like:
ID DATE
1 01/01/06
1 02/01/06
2 01/01/06
2 02/01/06
3 01/01/06
3 02/01/06
4 01/01/06
4 02/01/06
5 01/01/06
5 02/01/06
I have no idea how to “loop� through this record set for
each record in Table1 and in turn insert into Table2.