I'm passing a comma delimited string to my SP, e.g.:
"3,8,10,16,23,24"
I need to retreive each number in this string and for every number found I need to execute some sode, say add "AND SportID="+numberfound
How can I do that?
Hello,
I have a number of multi-select parameters which I would like to send to a stored procedure within the dataset for use in the stored procedure's IN() statement which in turn is used to filter on or out particular rowsets.
I considered using a hidden string parameter set = " ' " + join(parameter.value, ',') + " ' " so that the hidden parameter would then contain a comma delimiated string of the values selected, which would then be sent on to the stored proc and used in the WHERE clause of one of the queries internal to the stored proc.
But before I start dedicating time to do this I wanted to inquire if anyone here with far more expertise could think of a faster or less system heavy method of creating a single string of comma delimited parameter selections?
Thanks.
I am trying to pass a comma delimited llist of names to a stored procedure. I am getting a syntax error and I can't seem to figure out why. When i plug the names by hand into my select statement in query analyzer it all works fine.
Just a little background so i don't have to put all the code in... the list of name is built dynamically.
Below are all the code snippets. Thanks for your help in advance.
The is the list of names and the call to the stored procedure:
Code:
employeeList = 'name1','name2',name3','name4','name5'
SQL="sp_REVIEW @ACTION='lde', @CURRENT_USER='" & currentUser & "', " &_
"@EMPLOYEE_LIST='" & employeeList & "'"
Here is the stored procedure
Code:
SELECT ww.ORACLE_USER_NAME, ww.LAST_NAME + ', ' + ww.FIRST_NAME as employeeName,
ww1.DIVISION + ' - ' + ww1.COST_CENTER + ' - ' + ww1.COST_CENTER_DESC as department
FROM WHOS_WHO.dbo.HR_PEOPLE_V ww
LEFT JOIN WHOS_WHO.dbo.HR_DEPARTMENTS_V ww1 ON ww.DEPARTMENT_ID = ww1.ORG_ID
WHERE ww.SEARCHABLE = 1 AND ww.ORACLE_USER_NAME IS NOT NULL AND ww.PERSON_TYPE = 'Employee'
AND (ww.ORACLE_USER_NAME IN (@EMPLOYEE_LIST)
OR ww.DEPARTMENT_ID IN (SELECT ud.department_id
FROM USER_DEPARTMENT ud
WHERE ud.nt_id = @CURRENT_USER))
ORDER BY ww.LAST_NAME, ww.FIRST_NAME
I have a stored procedure that I want to use to update multiple records. I'm using ASP and the request form collection is returning values in a comma delimited list.
Example:
name1 = value1, value2, value3, etc.
name2 = value1, value2, value3, etc.
name3 = value1, value2, value3, etc.
Here is how I wrote my stored procedure:
CREATE PROCEDURE dbo.Sp_Update_ABR_Record
(
@abrID int,
@ddo varchar(50),
@ay varchar(50),
@strategy varchar(10),
@budgacct varchar(10),
@budgobj varchar(10),
@origamt
varchar(50),
@incrdecr varchar(50),
@review char(10),
@abrdetlsID varchar(50)
)
AS
UPDATE DIM_ABR_REQ_HDR
SET ABR_review = @review
WHERE ABR_ID = @abrID
UPDATE DIM_ABR_REQ_DETLS
SET ABR_DETLS_DDO = @ddo, ABR_DETLS_AY = @ay,
ABR_DETLS_STRATEGY = @strategy, ABR_DETLS_BUDG_ACCT = @budgacct,
ABR_DETLS_BUDG_OBJ = @budgobj, ABR_DETLS_FUND_ORIG_AMT = convert(money, @origamt), ABR_DETLS_FUND_INCR_DECR = convert(money, @incrdecr)
WHERE
ABR_DETLS_ID = @abrdetlsID
GO
The second update is where the comma delimited list needs to be handled. The first update is only updating one field once.
Is there a way to write the procedure to handle the comma delimited list? Or, is the way I have the stored procedure okay and I just need to handle the comma delimited list within the ASP code? I'm not sure which way I can accomplish this?
Thanks for any help.
-D-
I am simplifying things here. Basically I have:
SELECT ......... (my selection criteria)
where Id in (@Haulers);
@Haulers is supposed to be a comma delimited list. What do I need to do to make it filter correctly?
I need some help with a stored procedure to insert multiple rows into a join table from a checkboxlist on a form. The database structure has 3 tables - Products, Files, and ProductFiles(join). From a asp.net formview users are able to upload files to the server. The formview has a products checkboxlist where the user selects all products a file they are uploading applies too. I parse the selected values of the checkboxlist into a comma delimited list that is then passed with other parameters to the stored proc. If only one value is selected in the checkboxlist then the spproc executed correctly. Also, if i run sql profiler i can confirm that the that asp.net is passing the correct information to the sproc:
exec proc_Add_Product_Files @FileName = N'This is just a test.doc', @FileDescription = N'test', @FileSize = 24064, @LanguageID = NULL, @DocumentCategoryID = 1, @ComplianceID = NULL, @SubmittedBy = N'Kevin McPhail', @SubmittedDate = 'Jan 18 2006 12:00:00:000AM', @ProductID = N'10,11,8'
Here is the stored proc it is based on an article posted in another newsgroup on handling lists in a stored proc. Obviously there was something in the article i did not understand correctly or the author left something out that most people probably already know (I am fairly new to stored procs)
CREATE PROCEDURE proc_Add_Product_Files_v2/*Declare variables for the stored procedure. ProductID is a varchar because it will receive a comma,delimited list of values from the webform and then insert a rowinto productfiles for each product that the file being uploaded pertains to. */@FileName varchar(150),@FileDescription varchar(150),@FileSize int,@LanguageID int,@DocumentCategoryID int,@ComplianceID int,@SubmittedBy varchar(50),@SubmittedDate datetime,@ProductID varchar(150)
ASBEGIN
DECLARE @FileID INT
SET NOCOUNT ON
/*Insert into the files table and retrieve the primary key of the new record using @@identity*/ INSERT INTO Files (FileName, FileDescription, FileSize, LanguageID, DocumentCategoryID, ComplianceID, SubmittedBy, SubmittedDate) Values (@FileName, @FileDescription, @FileSize, @LanguageID, @DocumentCategoryID, @ComplianceID, @SubmittedBy, @SubmittedDate)
Select @FileID=@@Identity
/*Uses dynamic sql to insert the comma delimited list of productids into the productfiles table.*/ DECLARE @ProductFilesInsert varchar(2000)
SET @ProductFilesInsert = 'INSERT INTO ProductFiles (FileID, ProductID) SELECT ' + CONVERT(varchar,@FileID) + ', Product1ID FROM Products WHERE Product1ID IN (' + @ProductID + ')' exec(@ProductFilesInsert) EndGO
I have a scenario where in I need to use a comma delimited string as input. And search the tables with each and every string in the comma delimited string.
Example:
DECLARE @StrInput NVARCHAR(2000) = '.NET,Java, Python'
SELECT * FROM TABLE WHERE titleName = '.NET' AND titleName='java' AND titleName = 'Python'
As shown in the example above I need to take the comma delimited string as input and search each individual string like in the select statement.
I am trying to build a dynamic where statement for my sql stored prcoedure
if len(@Office) > 0 select @strWhereClause = N'cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText( ' + @vchOffice + ',' + ''',''' + '))' + ' and ' + @strWhereClause
In this case users can enter comma delimited string in their search criteria. So if they enter we1, we2, we3 then my sql statement should look like
select @strWhereClause = cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText('we1', 'we2', 'we3'),',')
My csfParseDeLimitedText function looks like this
Create FUNCTION [dbo].[csfParseDeLimitedText] (@p_text varchar(4000), @p_Delimeter char(1))RETURNS @results TABLE (id varchar(100))ASBEGIN declare @i1 varchar(200)declare @i2 varchar(200)declare @tempResults Table (id varchar(100))while len(@p_text) > 0 and charindex(@p_Delimeter, @p_text) <> 0beginselect @i1 = left(@p_text, charindex(@p_Delimeter, @p_text) - 1)insert @tempResults select @i1select @p_text = right(@p_text, len(@p_text) - charindex(@p_Delimeter,@p_text))endinsert @tempResults select @p_text
insert @resultsselect *from @tempResultsreturnEND
My problem is it does not put quotes around the comma delimited stringso I want to put 'we1' , 'we2'. These single quotes are not coming in the dynamic sql statement. How can I modify my query so that single quotes around each entry should show up.
Any help will be greatky appreciated.
Thanks
Hello
I have a table with column Options where each field contains a comma delimited list of ID numbers.
I want to select any records where a certain ID number appears in that list.
So something like:
SELECT * FROM Table t1
WHERE MyID IN (SELECT Options FROM Table t2 WHERE t1.ID = t2.ID)
But that gives me the error:
Syntax error converting the varchar value '39,20' to a column of data type int.
I feel I'm close though! Could anyone point me in the right direction?
Many thanks
Square
I have a problem in a stored procedure trying to insert a comma delimited list into rows.The parameters for example would be somthing like....
@GarageID int = 20,
@Cars nVarChar(200) = Ford~Fiesta,BMW~320,Volvo~340,Jaguar~XJS
I need to split where the comma is for each new row, and separate each value from either side of the '~' like so....
GarageID Make Model
--------------------------------
20 Ford Fiesta
20 BMW 320
20 Volvo 340
20 Jaguar XJS
I have a string like say: '3:4:5:4,2:4:1,4:1:2:5:2'. Now I need to split the substrings delimited by commas. So my final output shall be
3:4:5:4
2:4:1
4:1:2:5:2
I did write a piece of code to achieve the same, but I feel its not so efficient. Can anyone suggest me a better way, if any? My code is as follows:
Declare @person as varchar(255), @cnt smallint,@loc smallint,@prevloc smallint, @str varchar(255)
Select @prevloc=0,@loc=1,@cnt=1,@person = '3:4:5:4,2:4:1,4:1:2:5:2'
While @loc != 0
begin
set @prevloc=(case when @loc = 1 then 0 else @loc end) +1
set @loc = charindex(',',@person,@loc+1)
Set @str = substring(@person,@prevloc,(Case when @loc = 0 then len(@person) - @prevloc + 1 else @loc - @prevloc end))
print 'String = ' + @Str
set @cnt=@cnt+1
end
RESULT
------
String = 3:4:5:4
String = 2:4:1
String = 4:1:2:5:2
Note: My actual purpose is to also sub split it again with ':' delimiter too. So looking for an efficient code.
if i send the string
2,3,4,5 to a stored procedure...
is there a way i could split those values for input into the database? no, right? i would need a seperate stored procedure that would take each value one at a time...correct?
SP to parse a delimited string and insert the result in a table. I am using SQL Server 2008 R2. I have 2 tables - RawData & WIP. I have Robots on a manufacturing line capable of moving data to a DB. I move the raw data to RawData. On insert [RawData], I want to parse the string and move the contents to WIP as indicated below. I will run reports against the WIP Table.
Also, after the string is parsed, I'd like to change the Archive column, the _0 at the end of the raw string to 1 in the WIP table to indicate a successful parse.
Sample Strings - [RawData Table]
04102015_114830_10_013_9_8_6_99999_Test 1_1_0
04102015_115030_10_013_9_8_6_99999_Test 2_1_0
Desired Output - [WIP Table]
Date Time Plant Program Line Zone Station BadgeID Message Alarm Archive
-----------------------------------------------------------------------------------
04102015 114830 10 13 9 8 6 99999 Test 1 1 1
04102015 115030 10 13 9 8 6 99999 Test 2 1 1
I have the following table:id name1 yes2 no3 what4 is5 this6 niceThe amount of rows can vary from 1 to 50. I only need the name column.What SQL statement do I have to execute to get the following:yes,no,what,is,this,nice, (trailing , is acceptable)Thanks!
View 1 Replies View RelatedHi,I would like to parse out each value that is seperatedby a comma in a field and use that value to join to another table.What would be the easiest way to do so without having towrite a function or routine ?EX.Table AAACOL1 COL21 11, 124, 1562 11, 505, 600, 700, ...Table BBBCOL1 COL211 Desc11124 Desc124156 Desc 156
View 2 Replies View RelatedI have a parameter called Id in my SP which will be of nvarchar data type and i'm going to get the multiple ids at a time seperated by commas in that parameter from the application. Now my requirement is to update a table with these comma seperated ids in seperate rows.
For example, if i have 2 parameters called Id1 and Id2. Id1 will contain only one value and will be of int data type and Id2 will be of nvarchar data type as i can get multiple ids delimited by a comma from the application.
Suppose Id1 = 1 and Id2 = '1,2,3,4'. Then I have to update id2 in the tables seperately like wherever Id1 is '1' i need to update Id2 column for 4 rows with the value 1, 2, 3, 4 respectively in different rows.
how can i do this in T-SQL? How can i split the data of parameter Id2 in 4 different rows?
I am passing in a string of dates, delimited by a comma.
So
01/01/04, 02/01/04, 03/01/04
etc
I would like to enter each of these values into a table via an INSERT stored procedure.
Does anyone have any code for this?
Hello,
I was wondering if it's possible to pass in a comma separated string
"12,14,16,18" and use it in a stored procedure with "IN" like this:
@SubRegions varchar(255) <-- my comma separated string
SELECT *
FROM myTable
WHERE tbl_myTable.SubRegionID IN (@SubRegions)
It tells me it has trouble converting "'12,14,16,18'" to an INT. :(
I have 3 tables:tblUsersuserID int PK(...)tblSportsSportID int PK(...)tblUsersAndSports (contains the link between users and sports..a single user may have multiple entries in this table)Usercode intSportID intNow I want a stored proc that enables visitors to search on all user that have a specific sportID.The SportIDs to search on are in the var @sports as a comma delimited string,like '3,6,7'@sports may also be null (or an empty string if that is more convenient for building the SQL) when a visitor does not want to search on any of the sports a user practices, in that case no selection based on the sport criteria should be done, so ONLY filter on sports when the value of @sports is not nullpseudo code:select * from tblUserswhere if @sports not null user.sports in @sportsand username=@usernameand age=@agehelp is greatly appreciated!
View 10 Replies View RelatedUsing Flat File Connection Manager, I am specifying Text Qualifier = Double quotes{"}, and i have TXT file with one column for lastname and first name as "LN,FN", and settings are set to comma delimted, now the connectin manager is creating two different columns for LN and FN,
it was never a problem in DTS 2000.
any work around.
Thanks,
I want to allow visitors to filter a list of events to show only those belonging to categories selected from a checklist.
Here is an approach I am trying:
TABLE Events(EventID int, Categories varchar(200))
EventID Catetories
--------------------------
1 ‘6,8,9’
2 ‘2,3’
PROCEDURE ListFilteredEvents
@FilterList varchar(200) -- contains ‘3,5’
AS
SELECT EventID FROM Events
WHERE (any value in Categories) IN @FilterList
Result:
EventID
----------
2
How can I select all records where any value in the Categories column
matches a value in @FilterList. In this example, record 2 would be
selected since it belongs to category 3, which is also in @FilterList.
I’ve looked at the table of numbers approach, which works when
selecting records where a column value is in the parameter list, but I
can’t see how to make this work when the column itself also contains a
comma delimited list.
Can someone suggest an approach?
Any examples would be greatly appreciated!
Gary
We have the following two tables :
Link ( GroupID int , MemberID int )
Member ( MemberID int , MemberName varchar(50), GroupID varchar(255) )
The Link table contains the records showing which Member is in which Group. One particular Member can be in
multiple Groups and also a particular Group may have multiple Members.
The Member table contains the Member's ID, Member's Name, and a Group ID field (that will contains comma-separated
Groups ID, showing in which Groups the particular Member is in).
We have the Link table ready, and the Member table' with first two fields is also ready. What we have to do now is to
fill the GroupID field of the Member table, from the Link Table.
For instance,
Read all the GroupID field from the Link table against a MemberID, make a comma-separated string of the GroupID,
then update the GroupID field of the corresponding Member in the Member table.
Please help me with a sql query or procedures that will do this job. I am using SQL SERVER 2000.
Hi,
Good evening! I have a problem. I have a namelist coming from a distribution list of an active directory. When I converted it to csv file, the members reside in just one column and separated by a comma. I want the names to be separated in a row one by one. I tried it on excel and I used the transpose column but to no avail. My last resort is to import it on sql but the names on the column was cut and not complete. Do you have any idea how to do this. Your help is highly appreciated.
this is the sample file..
names
kelly.yap, lizzy.fox, yahoo, finance.dep, hope.miller, porly.john
the maximum names in a row is 566.
thanks in advance.
myBU
Would like to have a view created to display the result at the bottom of this message. We will be using Dreamweaver to display the information from this view. Also, for the record, we are using sql 2000. Any help would be greatly appreciated.
tblservers
servid servername
1 server1
2 server2
3 server3
tblapplications
appid appname
1 app1
2 app2
3 app3
tblapplink
id appid servid
1 1 1
2 1 2
3 1 3
4 2 1
5 2 3
6 3 1
we want to display this information as below:
appname serverlist
app1 server1, server2, server3
app2 server1, server3
app3 server1
Thank you very much,
mrtwo
Suppose I have a table named Test (referred in the query below)
Category Indicators
ctgy1Y,,,,
ctgy2Y,Y,Y,N,
ctgy3,Y,,Y,
and If I would like to transform this table to
Category Indicators
ctgy1Y
ctgy2Y
ctgy2Y
ctgy2Y
ctgy3Y
ctgy3Y
I am able to do it using the logic below
CREATE TABLE dbo.Numbers (Number INT IDENTITY(1,1) PRIMARY KEY CLUSTERED)
WHILE COALESCE(SCOPE_IDENTITY(), 0) < 5
BEGIN
INSERT dbo.Numbers DEFAULT VALUES
END
SELECT category,
SUBSTRING( Value, Number, CHARINDEX( ',', Value + ',', Number ) - Number ) as program
FROM Test
inner
JOIN Numbers
ON SUBSTRING( ',' + Value, Number, 1 ) = ','
and CHARINDEX( ',', Value+',', Number ) - Number <> 0
where Number <= Len(Value) + 1
But I would like to Transform this table into something like the one below (where if 'Y' before 1st comma then Q1, if 'Y' Before 2nd comma then Q2 and so on
Category Indicators
ctgy1Q1
ctgy2Q1
ctgy2Q2
ctgy2Q3
ctgy3Q2
ctgy3Q4
What is the best and efficient way to obtain this? Any help will be greatly helpful.
Thanks
Ram
I need to import comma delimited text files into sql tables. in one of the column, there is a comma in the string itself. e.g.
Cust_ID Name Phone Address1 Address2
Date that I have:
001,juia, anderson,4694568855,,Cedar Spring
The data does not have double quote as text qualifiers. but as you see, on the Name column, there is a comma, which is not a delimiter. can anybody give any suggestions on how i can deal with that? i would appreciate it so much.
thanks
Is it possible to get a comma delimited list of the views in a DB?
View 7 Replies View RelatedHow can I get a comma delimited list of the views in my db?
("view1","view2","view3",etc...)
Dear SQL,
Lets say I have a field: User_Names
and it can have more than one name
example: "Yovav,John,Shon"
How can I select all the records that has "Yovav" in them ?
I try some like this:
SELECT * FROM User_Table WHERE User_Names IN ('Yovav')
but it only works if the field User_Names only has "Yovav" in it with no extras...
is there some SQL function to tell if string is found in a field ?
Any hope 4 me ?
Hi I'm pretty new to using Microsoft Visual C# .NET and I want to upload a comma delimited text file from my local machine into a table in an sql server database through a web app. How would I go about programming this and what controls do I need? Any help would be much appreciated. Thanks in advance.
View 4 Replies View RelatedIs this possible? I find it hard to believe that this could be sooo difficult. I have a simple select stored procedure that has one parameter. My application is passing a comma delimited string of values to be used in the IN clause.
Ex: Where x In(@parametername)
the x column is an integer. How can one work around this???
Thanks!
Hi,
I have a complex query where each row in the final dataset is a
product.
However each product has a number of authors associated with it.
What I
would like to do is have a query/subroutine join the authors to the
product,
as a string:
ProductID
Title
Authors
1 The Sacred and the Profane John Rieggle, George
Alexi
2 Dancing
in the Dark Dan
Brown, Peter Kay, Paul
Dwebinski
Products
Table
==============
ProductID
Title
Authors
Table
=============
AuthorID
Name
Product Authors
Table
=====================
AuthorID
ProductID
Is this at all
possible?
Thanks
jr.
I have a row in a SQL table that has 4 numerical values, separated by comma. I'd like to take this and make it 4 separate columns. Values are not always the same length, but are always delimited by commas.
Any ideas how I could do this in T-SQL?