Hello,
I have a long stored procedure that performs some inserts and updates on the table that users are accessing through a user interface. We this stored procedure runs users experience slowness, is there any way I can get the stored procedure runs with a lowest priority so that user will be able to perform their tasks first.
Hello,
I have a long stored procedure that performs some inserts and updates on the table that users are accessing through a user interface. We this stored procedure runs users experience slowness, is there any way I can get the stored procedure runs with a lowest priority so that user will be able to perform their tasks first.
Hi all,
I have a stored proc. which is going to run 3 days long. So , i was looking for some setting (or) priority , which i can set in the stored proc.
so that, if someone else is using the server, they should get high CPU Priority, and my process ( Stored Proc) should remain in suspended state, until CPU & Disk activity is low.
Note : The only way others are getting affected is because of hardware resources, because nobody is using those tables which is being used by STORED PROCEDURE.
Can anybody tell plz, how to achieve this.
Thanks.
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
OK, this should be an easy one but my brain isn't quite working right now.
I have a table, we'll call Table1 like so:
ProductID Supplier Cost
12345 A 14.50
12345 B 13.49
12345 C 12.00
43222 A 15.00
43222 B 15.21
43222 C 13.99
12312 B 14.00
15421 A 21.99
15421 C 20.00
And I want to Get the name of the Supplier with the Lowest cost,
I know I can go like:
SELECT ProductID, MIN(Cost) FROM Table1 GROUP BY ProductID
and get the lowest cost, but what would be the most effiecent way to get all three fields returned by the query? I need the ProductID, Supplier and Cost.
Thanks,
SELECT
@AppId AS Application_Id
, MB.POLICY_ID AS Policy_Id
, MH.BFN_CHG_DATEAS Date_Of_Disinvestment
, AD.X_INVEST_AMT AS Original_Investment_Value
, MB.TOTAL_AMOUNT AS Encashment_Value
, WH.TOT_COMMISSION AS Top-Up_Commission
FROM: I select from lot of table, as specified from my select statement
My output:
AppId PolicyId Date_Of_DisIn Original_Inv Encashment_Value Top-Up_Commision ???
1-1-1; 1000000; Jan-01-12; 2882.07; 3312.00; 2306; ??
My Aliases returns just one values, of which that's what I am expecting, so I need to make a comparison between Original_Investment_Value and (Encashment_Value + Top-Up_Commision), and return the lowest value
Is there a more elegant way to do the following?...declare @d1 datetime, @d2 datetimeset @d1 = '2005-01-01'set @d2 = '2005-02-01'selectcasewhen datediff(dd,@d2,@d1)is nullthen coalesce(@d1, @d2)when (datediff(dd,@d2,@d1)> 0)then @d2else @d1endCheers,..N
View 2 Replies View RelatedHi, this seems to be an easy question but I can't find a quick answer to it.
I have an asp page that communicates with a database and I want the following example to work...
Insert 5 records into the DB with primary keys 1-5.
Remove record with key number 2.
Now, if I insert a new record I want it to take the smallest available key number (in this case number 2). This will save space in the database and keep the key numbers from increasing forever.
Does auto increment work like this?
If not, how do I do it?
Thanks for any replies!
Niklas
bp server with the lowest price
Our company is a proffesional deticated bullet proof server and general server provider in china. If you're looking for a reliable and long term cooperation bp server provider, it deservers you to read our company file to know more about us.
we have the lowest price for bp server.
http://www.serverinchina.com/bpserverservice/index.htm
ICQ:226745581 MSN:dqkj#hotmail.com
ICQ:329211498 MSN:jiemie11#hotmail.com
Email: serverinchina#yahoo.com.cn
Website: www.mailinchina.com www.serverinchina.com
Im having trouble finding a solution to comparing columns to find the lowest value.
Example
Row 1
COL 1 = 10
COL 2 = 20
COL 3 = 60
COL 4 = 5
COL 5 = 35
I would want to return 5.
I tried to write a case statement such as below but am unable to use Logical Operators.
WHEN C1 <= C2 and C1<= C3 THEN C1
WHEN C2 <= C3 THEN C2
ELSE C3
any help would be great.
Thanks,
Nick
(Spam Removed)
View 1 Replies View RelatedI'm using sql express 2005. I need help with buliding a view.
I'm trying to join two tables and then, if duplicate ID's exist, retrieve the row with the lowest value in a specific column.
For instance:
TableHousehold:
ID Name Status
001 The Smith€™s A
002 The Jone€™s A
003 The Adam€™s A
004 The Grant€™s A
TableResidents
Pk HouseholdID ResidentID Name Gender
1 001 1 Mary Smith F
2 001 2 Jason Smith M
3 001 3 Rachel Smith F
4 002 1 Mike Jones M
5 002 2 Sara Jones F
6 003 2 Erik Adams M
The resident ID is auto increment and assigned by the server. It is possible for resident 1 for each household to have been deleted. It is also possible that a household does not contain any residents. Therefore, I wish to join these tables and return this:
ID HouseHoldName Status ResidentName Gender
001 The Smith€™s A Mary Smith F
002 The Jone€™s A Mike Jones M
003 The Adam€™s A Erik Adams M
004 The Grant€™s A null null
There are other columns in both tables that I will want to join, but for simplicity, the above example illustrates my need.
I was able to accomplish this by creating two views. But I€™d like to try and do this in one.
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I have a little problem that I just haven't been able to solve. I don't think it is very difficult but I can't seem to make it work. Here's the scenario:
I have a database with the following values:
Model Make Price
DA1100 GTN$88.00
DA1100 GTN $100.00
DA1000 GBN$110.00
DA668 GTN$100.00
DA880 GTN$200.00
In this case DA1100 is listed twice with 2 different prices. I only want to display the one with the lowest price. So the result I want is:
Model Make Price
DA1100 GTN$88.00
DA1000 GBN$110.00
DA668 GTN$100.00
DA880 GTN$200.00
finding the first value to cross a specific threshold in SQL Server
LoadTemp1 LoadTemp2 LoadTemp3 TimeStamp
300 350 200 12-10-2013 13:30
177 238 333 12-10-2013 13:05
240 190 170 12-10-2013 12:45
How do I design query to find the first LoadTemp* that cross a threshold of 340 degrees per TimeStamp.
I need to display the difference between the highest and lowest salaries. Label the column DIFFERENCE. like below:
From what I came up with is should look something like so:
<b>SQL> select * from 'salary' order by salary desc limit
select * from 'salary' order by salary desc limit 1,1 </b>
DIFFERENCE
------------------
4200
Let's say I have a result set (records) containing numbers such as:01239162145100101102103104105106How might someone write a procedure to get the next lowest number inthis sequence? In this case it would be: 4. Some combination ofSelect, Min & When, I am sure, but it escapes me at the moment.Thoughts? Thanks...
View 5 Replies View RelatedI am attempting to only query the lowest year, and month from my entire production database. I am using the following query and when I do it individually it will bring back the lowest year but also with additional years. How can I remove those other years so I can only query the lowest year and month from the entire database?
Code:
select distinct RRCID, MIN(YEAR)as YEAR, MONTH
from Gas_Prodv1
where RRCID = 1221376
group by RRCID, MONTH
order by YEAR, MONTH
Results:
122137620071 <----- Only want this record
122137620072
122137620073
122137620075
122137620076
122137620077
122137620078
122137620079
1221376200710
1221376200711
1221376200712
ID (PK), userID (FK), from [Datetime], to[datetime], type [int] , value [nvarchar]
Conditions
I want to select the column "to" which is a datetime-column for all users within the table.
One user can have multiple registered rows in "mytable", so I want to select the row that contains the newest "from" date.The newest "from"-column for a specific user is where I am struggling... Because if the "to"-column of any of the registered rows by the current user is equal to the newest "from -1 day" column for the user, I want to select the second newest from-date.
Code:
//Handwritten
DECLARE @from DATETIME //Current Selected datetime [the newest of the current user doing the query]
DECLARE @id INT //userID
DECLARE @tbl TABLE (from datetime, userid int)
[code]....
But for user ID 201 [all users with Type = 1], I need to run through some more code, to figure out which date we want... Which date do I want? The "from"-date that is the newest, but if "to" is just 1 day before "from", I want to select the "from" at that row instead... Example with numbers [integers] instead of Date:
Code:
From - To
5 8
10 15
16 20
I want to select "10" in the from column as the maximum "from"-integer, and not 16. Because in the "To" column we have a match in the "from" column on the condition "To + 1" [15+ 1 == 16], so then I want the "from" value where "To" equals 15, which is 10. The top row I do not want, because the difference between From and To [10 - 8 is larger than 1]...
This means that the Image shown... I am first selecting the "1", then I do some checks, if the "to" for the user is 1 day earlier than the MAX(from) I grab a new "from" value...
Code:
SELECT MIN (t1.from) FROM table as t1
WHERE
t1.from IN
(
SELECT t2.to+ 1 FROM table as t2
WHERE t2.userID = @id
)
I have a table and am usuing ASP to query the database, the connection is to a MS Access table at the moment but am working to convert to SQL Server.
Question:
I need to select the last 20 records, by a date field, then from those 20 records select the 10 lowest scores.
Example is a member logs on an that member has say 80 total records in the table. Then I need to select the last 20 records entered by the date field then select the lowest 10 scores out of those 20.
I am new to more compex SQL Statements any help would be mostly appreciated!
table = HC_ID
date field = date
member_id = member
score = ScoreHC
ID
Original_Date
Date1
Date2
Lowest_Date
1
12/2/07
14/02/07
18/02/2007
14/02/2007
2
01/03/07
23/3/2007
11/3/2007
11/03/2007
3
15/4/2007
14/05/2007
16/05/2007
14/5/2007
4
6/6/07
8/6/07
9/6/06
8/6/07
I have a select query that looks like this
Select table1.id, table1.original_date,
(select €¦€¦..from €¦..) as Date1,
(select €¦€¦..from€¦..) as Date2
from table1
Date 1 and Date 2 are both complex subqueries that retrieve a date from other tables. I would like another column displaying the oldest date between date1 and date2. Can anyone help?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,
consider my table,
s.no priority status
1 2 pending
2 3 pending
3 0 completed
4 1 pending
5 0 completed
Now, if I insert a record as,
6 1 pending
the priority must be reset as follows,
s.no priority status
1 3 pending
2 4 pending
3 0 completed
4 2 pending
5 0 completed
6 1 pending
Im using c# and sql server. How can i do it?
Thanks,
Jasmeeta.
Hi guys.
Is there anyway to increase the priority of a Service in NT services in processing like we have in SQL Server.
-MAK
Hi,
Is it possible to change/set the priority of databases? (Win2K, SQL 2K)
We have an evnironment which is somewhat lacking in resource, and would like to place the priority of one of the databases lower than the other so that the processing on the main database is carried out before the secondary one.
If there isn't any way to do this for the database level - is it possible for a specific user?
Hopefully I havnt been too vague here - but if there is any more info I should be passing on let me know.
Thanks in advance.
Cheers