I tried to find some information about this, but surprisingly can't seem to find anything. Seems like it would be a very common scenario.
I need to send the output of a stored procedure to a flat file. First, I created an Execute SQL Task that calls the stored procedure. I selected "full result set."
My first question is, how do I capture the individual column values? For example, under "Result Set", should I create an Object variable, or should I use individual column variables? I've tried both ways, but can't seem to get to the next item, below...
Now, how do I map the variables to the flat file? If I use a data flow task, the flat file has "no available inputs". If I add an OLE DB Source before the flat file destination, there's no place to capture the result set.
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
I have stored procedure which need 4 input variables. I want to send the stored procedure output to Table or text file. Is there any way I can do it let me know. Here is the stored procedure.
I have a stored procedure that outputs an XML result. As it is right now, I will periodically go into SQL Server Mngmnt Studio and run the procedure, then save the XML output to an XML file that my website uses. The procedure takes too long run (it is recursive through the entire data set) to have the website call the procedure on its own, and wait for the results.
My question is this: Can I create a trigger that will run this stored procedure and save the results to a file? Is that possible? The trigger would call the procedure any time a specific table is updated (which will be a rare occurrence), then save the file to the path provided so the website users could always have the most up-to-date information without having long wait times caused by long waits for the procedure to run.
Any advice on how best to accomplish this will be appreciated. Thanks in advance.
I am having a Stored Procedure Or SQL Script to be attached to Job Scheduler. When this Stored procedure executes it generates some output text. I need to store this output to text file when ever this store Procedure (or) SQL Script executed by job Scheduler.
The following bcp command is present in an NT job I have scheduled each daybcp "EXECUTE DailyProd.dbo.GetIndexComponentStocks_XML '2006-04-05'" queryout "D:TABLESINPUTAPIndexComponentStocks.wrk" -S(local) -c -T -o"..IndexComponenet_XML_LOG.txt" -e"..IndexComponenet_XML_ERR.txt" My trouble is that every 2034 characters the output contains a :0D:0A (CR/Linefeed).
Other than that all the output data looks peachy.
Is there some line size setting I am missing (would it be packetsize?)?
Ideally I would just like to not have any CR/LF in my file at all...is there some way to turn it off? I see there are flags to set to change the column and row terminators, but how to turn them OFF???
I am using a simple input from an SQL data base where I have 4 dates defined as type D. I am writing to a flat file with the fileds defined with any available date format and the output on the flat file comes out as "mm/dd/yy 00:00". I'd like to just have the date portion with no time. The input does not have a time on it so I understand the 00:00 as the value. It seems that I shouldn't have to do any extra work as it is date to date. I've seen the gyrations for a date from the SQL database when it is a character field, but that's not the issue here.
Other than using the -o parameter of ISQL, is there any way to mimic the DBMS_OUTPUT.PUT_FILE capability that exists in ORACLE (also set serveroutput xxx). I have a big need to run both queries and stored procedures and have the output placed in a flat file. This flat file will then be edited and loaded into another SQLServer 7.0 table. Basically, SP or SQL stmt -> output to flat file -> external manipulation -> SQL table Thanks in advance.
I am moving data from a flat file source to a SQL Server table. But I want to add a columm that IS in the destination table, but NOT in the source file. Say the table column name is XXX in destination table, and there will be a global variable called @[User::XXX] that remains constant throughout the package. I would like to put the variable value into the destination column, even though the source file does not contain the field. Is there an easy way to do this?
I cannot seem to get my flat file to write columns in error when inserting into a SQL table. I have tried a few examples from MS and did not get anything written to my flat file output. I have set the Source Error Output on this flat file and it uses a script task to created the error description and then write it to a Flat File Destination.
I am new to SSIS and have not had any formal training on it. However, I am very familiar with VS.Net/c# and SQL 2000 DTS - I need to get this working ASAP as there are 45 total flat files that need to be processed. Once I have this solved for one, the rest will follow suit.
I have a SSIS package that dumps data from an internal table to a flat file output using standard data flow tasks. The entire table is output - no special SQL. Most of the time the records are placed in the output file in the same order as the internal DB table, but occasionally the order appears to be more random. When that happens, the record order in the internal table is correct - it is just the output.
I can find no properties that seem to affect this. I would appreciate any hints and advice that anyone can give me. Has anyone else encountered this same problem?
I am stuck with a problem and need your help. As we know, all columns that go to error flow of flat file source connection are displayed as a single column e.g. FlatFileSourceErrorOutputColumn, but my requirement is to extract the first column value from this FlatFileSourceErrorOutputColumn, my data is dilimeted by "|" pipe operator. I have created a script component to deal with this. However if we take FlatFileSourceErrorOutputColumn column as input column in script component, it comes as BLOB data. I wrote below code in transformation script component to extract BLOB data from column in string form and then do a Left function search to take first column out.
When I am running this script component I am getting '??????????' question marks as a result in Row.Pname.
Can anyone please help me understand if I am doing anything wrong in this script or suggest a better way to take the data out?
I appreciate your help.
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
I have a text file that is comma delimited and im pulling it in with a flatfile connection manager. I want to read some of the data, then output another flat file but in a fixed column width. What settings do I made to the connection manager of the output flatfile ?
how do I make the output columns padded with extra space ? I intentionally set my output width larger than the input width, but the generated file is still jamming all the columns next to each other
I want to make a very simple package: Export all rows in a table to a flat file. This package I can create pretty much by only using the wizards. Now to my problems:
H is a header post, in this case with date and time following. D is a details post, that is all the rows that was exported. E is and end post, containing only the number of rows in the file, including H and E posts.
2) I need to set the file name dynamically, preferably using date and time to name the file.
I´ve done this very same thing in T-SQL, like so:
Code Snippet USE AVK GO SET TRANSACTION ISOLATION LEVEL SNAPSHOT; GO SELECT * FROM tempProducts GO CREATE VIEW EXPORT_ORDERS AS SELECT 1 AS ROW_ORDER, 'H' + REPLACE(CONVERT(char(8), GETDATE(), 112) + CONVERT(char(8), GETDATE(), 108), ':', '') AS Data_Line UNION ALL SELECT 2 AS ROW_ORDER, 'D' + COALESCE (CONVERT(char(10), LBTyp), '') + COALESCE (CONVERT(char(50), Description), '') + COALESCE (CONVERT(char(5), Volume), '') AS Data_Line FROM dbo.tempProducts UNION ALL SELECT 3 AS ROW_ORDER, 'E' + RIGHT('0000000000' + RTRIM(CONVERT(char(13), COUNT(*) + 2)), 11) AS Data_Line FROM dbo.tempProducts AS tempProducts_1 GO IF @@ROWCOUNT > 0 BEGIN BEGIN TRANSACTION SELECT * FROM tempProducts DECLARE @date char(8) DECLARE @time char(8) DECLARE @sql VARCHAR(150) SELECT @date = CONVERT(char(8), getdate(),112) SELECT @time = CONVERT(char(8), getdate(),108) SELECT @time = REPLACE(@time,':','')
DECLARE @dt char(14) SELECT @dt = @date + '_' + @time SELECT @sql = 'bcp "SELECT Data_Line FROM avk..EXPORT_ORDERS ORDER BY ROW_ORDER" queryout "c:AVK_' + @dt + '.txt" -c -t -U sa -P dalla' EXEC master..xp_cmdshell @sql
--WAITFOR DELAY '0:00:10'; DELETE FROM tempProducts
COMMIT TRANSACTION END DROP VIEW EXPORT_ORDERS GO
But I´m sure it can be done in SSIS aswell, giving me some nice options for i.e. error handling aswell. Pointers please
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
I have a simple SSIS package that runs a query on the db and outputs a fixed width flat file. I have all my column widths defined and in the connection manager i can preview the output. Everything looks great. All the fields fall where they should and each record is on it's own line.
When i run the SSIS program and then go open my text file with a text editor the ouput is all on the same line. I have tried changing my file format from fixed width to ragging right and adding a row delimiter but that doesn't work either. I feel like i'm missing something small here. It could even be an issue w/ my text editor (although i've tried to open the text file in multiple editors). In the flat file connection manager I have my file defined to be 187 characters long, So figure every 187 characters it should output a new line (it should add the carraige return right?).
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
I have a variable @NetPay as type money, and a stored proc spGetNetPay. The output of spGetNetPay has one column NetPay, also with type of money, and always has one row.
Now I need assgin output from spGetNetPay to user variable @NetPay. How can I do That?
Set @NetPay = (Exec spGetNetPay) Sorry this does not work. Is it possible to create a user defined function?
I have little knowledge about User defided function. Is is the way I should go?
Hi I am running a stored procedure which first puts the data in a temp table and then gives the output... the output is supposed to generate a report based on data from temp table
However when i run it, the first 2 statements are
(15345 row(s) affected)
(407 row(s) affected)
abd then the select statement runs...due to this, the report in ASP returns an error...does anyone know how i can suppress the first 2 lines and get only the actual data as output
When I run a script in query analyzer using a script (A "GO" statement exists after each SQL) I get the results on screen as soon as each query completes. When I run thru stored proc, I can get the result only after the whole procedure completes execution. Is there any way to get the outpout immediately as soon as each query completes? This will be useful in tracking thre progress of a stored proc. Thanks Satish
