i want to have a user defined function or stored procedure(i don't know which one should be used, anyway!) which returns false if the table has no records, with the table name comes with a parameter.
could you give a little code sample?
thanx
How to return an entire table from stored procedure ????
thanx in advance
I hvae a stored procedure that has this at the end of it:
BEGIN
EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, ''
END
SET NOCOUNT OFF
SELECT Something
FROM Something
Joins…..
Where Something = Something
now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure.
What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
I've built a simple VS2005 ASP.Net web app that uses Crystal Reports for generating assorted reports. More specifically, when a report is called it executes the correct SQL Server Stored Procedure and returns a Data Table populated with with appropriate data. In my testing, everything seemed to be working fine.But I just did a test where I pressed the "Submit" button on two different client browsers at almost the same time. Without fail, one browser returns the report as it should but the other one returns an empty report; all of the Crystal Reports template info is there but the report is just empty of data. Considering that each browser is running in its own session, I'm confused about why this is happening.One thing: I did login as the same user in both cases. Might this be causing the problem?Robert W.Vancouver, BC
View 7 Replies View RelatedIs it possible to return the results of a stored procedure into either a CTE or temp table?
In other words, is it possible to do this:
with someCTE as (
exec someStoredProc
)
or this:
exec someStoredProc into #tempTable
???
I have on stored procedure which returns mote than one resultset i want that to store in two different temp table how can achieve this in SQL server.
Following is the stored procedure and table that i need to create.
create procedure GetData as begin select * from Empselect * from Deptend
create table #tmp1 (Ddeptid int, deptname varchar(500),Location varchar(100))
Insert into #tmp1 (Ddeptid , deptname ,Location )
exec GetData
create table #tmp (empid int , ename varchar(500),DeptId int , salary int)
Insert into #tmp (empId,ename,deptId,salary)
exec GetData
Hi there :)
I was hoping someone could help me figure out why this doesn't work....
I have a class called ProductsDB with a method called AddProduct that looks like this:
public String AddProduct(int categoryID, int makeID, string name, double price, double saleprice, double offerprice, int homepage, string thumbpath, string imagepath, string description)
{
// Create Instance of Connection and Command Object
SqlConnection myConnection = new SqlConnection(ConfigurationSettings.AppSettings["ConnectionString"]);
SqlCommand myCommand = new SqlCommand("ProductsAdd", myConnection);
// Mark the Command as a SPROC
myCommand.CommandType = CommandType.StoredProcedure;
// Add Parameters to SPROC
SqlParameter parameterCategoryID = new SqlParameter("@CategoryID", SqlDbType.Int, 4);
parameterCategoryID.Value = categoryID;
myCommand.Parameters.Add(parameterCategoryID);
SqlParameter parameterMakeID = new SqlParameter("@MakeID", SqlDbType.Int, 4);
parameterMakeID.Value = makeID;
myCommand.Parameters.Add(parameterMakeID);
SqlParameter parameterName = new SqlParameter("@Name", SqlDbType.NVarChar, 50);
parameterName.Value = name;
myCommand.Parameters.Add(parameterName);
SqlParameter parameterPrice = new SqlParameter("@Price", SqlDbType.Money, 8);
parameterPrice.Value = price;
myCommand.Parameters.Add(parameterPrice);
SqlParameter parameterSalePrice = new SqlParameter("@SalePrice", SqlDbType.Money, 8);
parameterSalePrice.Value = saleprice;
myCommand.Parameters.Add(parameterSalePrice);
SqlParameter parameterOfferPrice = new SqlParameter("@OfferPrice", SqlDbType.Money, 8);
parameterOfferPrice.Value = offerprice;
myCommand.Parameters.Add(parameterOfferPrice);
SqlParameter parameterHomepage = new SqlParameter("@Homepage", SqlDbType.Bit, 1);
parameterHomepage.Value = homepage;
myCommand.Parameters.Add(parameterHomepage);
SqlParameter parameterThumbnail = new SqlParameter("@Thumbnail", SqlDbType.NVarChar, 50);
parameterThumbnail.Value = thumbpath;
myCommand.Parameters.Add(parameterThumbnail);
SqlParameter parameterImage = new SqlParameter("@Image", SqlDbType.NVarChar, 50);
parameterImage.Value = imagepath;
myCommand.Parameters.Add(parameterImage);
SqlParameter parameterProductID = new SqlParameter("@ProductID", SqlDbType.Int, 4);
parameterProductID.Direction = ParameterDirection.Output;
myCommand.Parameters.Add(parameterProductID);
try
{
myConnection.Open();
myCommand.ExecuteNonQuery();
myConnection.Close();
// Calculate the ProductID using Output Param from SPROC
int productId = (int)parameterProductID.Value;
return productId.ToString();
}
catch
{
return String.Empty;
}
}
And then in another cs file for my aspx page I have an event handler for an add button in a webform, which looks like this:
// Add New Product to ProductDB database
bikescene.Components.ProductsDB accountSystem = new bikescene.Components.ProductsDB();
String productId = accountSystem.AddProduct(Int32.Parse(DDLproductcategory.SelectedValue), Int32.Parse(DDLproductmanufacturer.SelectedValue), TBproductname.Text, Double.Parse(TBproductprice.Text), Double.Parse(TBproductsaleprice.Text), Double.Parse(TBproductofferprice.Text), Int32.Parse(DDLproducthomepage.SelectedValue), thumbnailpath, imagepath, TBproductdescription.Text);
And finally, here is my stored procedure:
CREATE Procedure ProductsAdd
(
@ProductID int,
@CategoryID int,
@MakeID int,
@Name nvarchar(50),
@Price money,
@SalePrice money,
@OfferPrice money,
@Homepage int,
@Thumbnail nvarchar(50),
@Image nvarchar(50),
@Description nvarchar(500)
)
AS
INSERT INTO Products
(
productID,
categoryID,
makeID,
name,
price,
saleprice,
offerprice,
homepage,
thumbpath,
imagepath,
description
)
VALUES
(
@ProductID,
@CategoryID,
@MakeID,
@Name,
@Price,
@SalePrice,
@OfferPrice,
@Homepage,
@Thumbnail,
@Image,
@Description
)
SELECT
@ProductID = @@Identity
GO
Basically, my images are uploaded to the server just fine but nothing is being added to the database + I don't get any error messages.
Any ideas?
Many thanks indeed :)
How does one get the names and data types of the parameters of a SQL 2005 stored procedure? There does not seem to be a refresh for a command parameters object, and the syntax for the get() in I don't seem to have right in c++.
View 1 Replies View RelatedIn the web site that I am building ( in C# language ), a hypothetic customer who would buy something would then be redirected to a Secure payments company where he would make the payment and then the company would send back to my web site, information about this transaction.
My program would then save this info in a Microsoft SQL database. The problem is that this company uses to send the same info several times repeatedly and I do not want to store the same info more than once.
So I want a SQL procedure where it takes the invoice number of the customer ( contained in its string of info ) and looks inside a table to see if it was already stored there. If it is there ( or not ), it would return a value, which could be false/true or 0/1 so my program could use this value to save a new info or not and then activate ( or not ) some related tasks.
I am still learning SQL and I tried the below procedure but it is not working. Which alternative procedure could solve the problem ?
~~~~~~~~~~~~~~~~~~~~~~~~~
CREATE PROCEDURE VerifyIfInvoiceExists
(@Invoice VARCHAR(50))
AS
SELECT COUNT(*) FROM IPN_received
WHERE Invoice = @Invoice
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dear GroupI have found that table A had SELECT permissions for 'Public' but not tableB.Giving 'Public' SELECT permissions on table B did the trick.HOWEVER, I don't want anyone to be able to do a direct SELECT on table A orB but only give them access to the data by using the stored procedures. Isthere any way this can be set up?Thanks for your efforts!Have a nice day!Martin"Martin Feuersteiner" <theintrepidfox@hotmail.com> wrote in message news:...[color=blue]> Dear Group>> I'm having two stored procedures, sp_a and sp_b>> Content of stored procedure A:> CREATE PROCEDURE dbo.sp_a> SELECT * FROM a> GO>> Content of stored procedure B:> CREATE PROCEDURE dbo.sp_b> SELECT * FROM b> GO>> I have created a user that has execute permissions for both procedures.> When I run procedure A, all works fine but when running procedure B I'm> getting an error saying that the user must have SELECT permissions on> table B.>> Both tables are owned by dbo, and the security role for the user doesn't> has any SELECT permission on table a and b.> I'd be grateful if anyone could point me in a direction why this error> might come up for procedure B but not for A,> with a possible solution without giving the user SELECT permissions.>> Thanks very much for your help!>> Martin>[/color]
View 6 Replies View RelatedHow to get the details of a stored proc or sql query which updated a particular table for specified time stamp or interval. Is there any query to get this?
View 3 Replies View RelatedI am trying to run an update stored procedure that will add 1 revision to the rev field and return the Value back to my Application. My number is incrementing by 2 and not 1.
Here is my Stored Procedure
CREATE PROCEDURE dbo.sp_Update_file
@kbid big,@filename nvarchar(50),@rev big OUTPUT,@moddate datetime,@owner nvarchar(50),@author nvarchar(50)AsUPDATE KBFile
SET rev = rev + 1,filename = @filename,moddate = @moddate,owner = @owner,author = @author,@rev = (Select rev from kbfile where kbid = @kbid)WHERE kbid = @kbIDGO
Ok, still a little bit novice on stored procedures, and can't see why this one doesn't return the value I need.In this case, lessonLocation.CREATE PROCEDURE dbo.getLocation @studentId VARCHAR(20), @lessonLocation VARCHAR(50) OUTPUTASBEGIN DECLARE @errCode INT
SELECT lessonLocation FROM cmiDataModel WHERE studentId = @studentId
SET @errCode = 0 RETURN @errCode RETURN @lessonLocation
HANDLE_APPERR: SET @errCode = 1 RETURN @errCodeHANDLE_DBERR:
SET @errCode = -1 RETURN @errCodeENDGOIn the query analyzer, it returns the value in the db, but always blank when run in the .Net app.Thanks all,Zath
Hi everyone!
I am new to sql server 2005 and visual studio 2005.
I have the following simple stored procedure that checks if a user exists:
-------------------------------------------------------------------------------------------------------
ALTER PROCEDURE [dbo].[sp_Users_AlreadyExists]
@UserName varchar(256)
AS
BEGIN
SET NOCOUNT ON;
IF (EXISTS (SELECT UserName FROM dbo.Users WHERE LOWER(@UserName) = LoweredUserName ))
RETURN(1)
ELSE
RETURN(0)
END
-------------------------------------------------------------------------------------------------------
I use the following code to execute the procedure on visual studio:
-------------------------------------------------------------------------------------------------------
.
.
.
cmdobj As SqlCommand
cmdobj = New SqlCommand(sp_Users_AlreadyExists, connobj)
cmdobj.CommandType = CommandType.StoredProcedure
cmdobj.Parameters.AddWithValue("@UserName", "blablalala")
cmdobj.ExecuteNonQuery()
cmdobj.Dispose()
connobj.Close()
.
.
.
-------------------------------------------------------------------------------------------------------
I expected that cmdobj.ExecuteNonQuery() would return 1 if the user
blablab exists or 0 if the user doesnt, but it just return -1 (i think
because no row was affected)
Does anyone knows how to retrieve the value that my stored procedure returns?
Thanx in advance!
Trying to get a count on records that match search and all I'm getting is 0. I'm using the same basic sp and code elsewhere and it works fine. Anyone see anything wrong here?
Stored Procedure:CREATE PROCEDURE GetResultsCount(@searchCatalog nVarchar(100))ASRETURN ( SELECT COUNT(*) FROM CatalogWHERE itemName LIKE @searchCatalog ORitemLongDesc LIKE @searchCatalog)GO
Code: Dim connStr As SqlConnection Dim cmdResultsCount As SqlCommand Dim paramReturnCount As SqlParameter Dim intResultsCount As Integer connStr = New SqlConnection(ConfigurationSettings.AppSettings("sqlCon.ConnectionString")) cmdResultsCount = New SqlCommand("GetResultsCount", connStr) cmdResultsCount.CommandType = CommandType.StoredProcedure cmdResultsCount.Parameters.Add("@searchCatalog", Request.QueryString("search")) paramReturnCount = cmdResultsCount.Parameters.Add("ReturnValue", SqlDbType.Int) paramReturnCount.Direction = ParameterDirection.ReturnValue connStr.Open() cmdResultsCount.ExecuteNonQuery() intResultsCount = cmdResultsCount.Parameters("ReturnValue").Value connStr.Close() Me.lblResultsCount.Text = intResultsCount
Im creating an app in VB.NET that calls a stored procedure which inserts data into one of my tables. I need it to return the id it creates (autonumber) to the VB.NET Program
I keep raising an exception in VB.NET...I want to make sure my stored procedure is correct first...sadly this is my first procedure ive created.
CREATE PROCEDURE db_addtocontractInsert
@contractid int,
@playerid int,
@numyears smallint,
@year1 float(8),
@year2 float(8),
@year3 float(8),
@year4 float(8),
@year5 float(8),
@yearsremain smallint
AS
INSERT INTO db_Contracts
VALUES (@playerid,@numyears,@year1,@year2,@year3,@year4,@year5,@yearsremain)
SELECT @contractid
Return @contractid
GO
-----------------------------------------------
Any tips or corrections that need to be made would be greatly appreciated.
Thanks
Tainter
If I pass in the value of 1, the stored procedure should return the value of (.5360268), else it should return 0 for any other value(null/blank/empty/etc)
The following stored procedure is returning the value 0 if I pass in the value of 1 which is wrong. And I would need to set to 0 for any other value. I am checking only for null or empty, but the if condition should check any value (except 1) and return 0 for it.
ALTER PROCEDURE [dbo].[Calculator]
(
@ExtraCardiacArteriopathy bit
)
AS
BEGIN
declare @zarterio decimal(14,10)
[Code] .....
Hi Guys, I have a series of count statements in a Stored Procedure that return some values. What I want to do is take all of the values that have been returned by the Count statements, add them up and return the value to my .Net Code, but for some reason whenever I try I carry on getting a returned value of 0.
I have checked that the statements are in fact returning values other than 0, and I was wondering if there is something that I am doing wrong in the code below:
<code>
CREATE PROCEDURE [dbo].[UCOutstanding]
@userid int
AS
DECLARE @Num as Int
DECLARE @Num2 as Int
DECLARE @Num3 as Int
DECLARE @Num4 as Int
SET @Num = (SELECT count(*) FROM images, albums, memorial WHERE (images.active=0 AND images.albumid=albums.id AND albums.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num2 = (SELECT count(*) FROM downloads, memorial WHERE (downloads.active=0 AND downloads.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num3 = (SELECT count(*) FROM images, comments, albums, memorial WHERE (comments.active=0 AND comments.imageid=images.id AND images.albumid=albums.id AND albums.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num4 = (SELECT count(*) FROM memorial, story WHERE (story.memorialID=memorial.id and memorial.userid=@userid))
DECLARE @Total as Int
SET @Total = @Num + @Num2 + @Num3 + @Num4
Return @Total
GO
</code>
Thanks for the Help
GP
I have a Sproc shown below I want the procedure to return the New_ID value back to the calling program how can I do this.
The current approach is not working. Please help.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
.................................
ALTER PROCEDURE [dbo].[SP]
(
@Id int=NULL ,
@site_id int = null,
@Date datetime = null,
)
AS
BEGIN
Declare @New_ID varchar(10)
EXEC [dbo].[SP_GENERATEID] @New_ID output
INSERT INTO A_Table(
CODE,INT_ID,SITE_INT_ID,DATE,
)
Values
(
@New_ID,@Id,@site_id,@Date )
return @New_ID
END
Thanks
Hi All.Maybe someone in here could help on this too....Uusally I can return a value from a stored procedure without any problem.Today I ran into something I cannot figure out.Basically....what I am doing is a couple of inserts or updates depending onwhat is being passed.So in the storedproc tag, I am passing the necessary values along with 1output param. I was using an INOUT param, but I figured I would play itsafe since it wasn't working.So...in the stored procedure, I do some conditions inside transactionstatements...I don't have the code with me right now as I am home, but I figure if I cangive you the general idea, you may know what the problem is.So I have something like this...BEGIN TRANIF team_ID is nullBEGINIF target_ID > 0BEGIN--- INSERT processingSET @OutPutVariable = Scope_Identity()ENDIF target_ID < 0BEGIN--- INSERT processingSET @OutPutVariable = Scope_Identity()ENDENDIF team_ID is not nullBEGIN-- UPDATE ProcessingENDCOMMIT TRANSELECT @OutPutVariableIf I run this procedure through enterprise, i get what I need....the valueof the last inserted record. When I do it through CF, I always get 0 ORnothing at all.If I do a SELECT 100, I get a return value of 100 of course, so it seemslike it's out of scope.Any ideas?
View 5 Replies View RelatedI have a stored procedure below that returns a table of coaches. It worked before now it does not. It returns nothing, in vistual studio 2005 and on my asp.net webpage. But when I execute it in query analyzer with just SELECT * FROM Coaches it returns the rows. There is no error just will not return what I need. I recreated the database and stored procedure still doing the same thing. Any ideas? Would this be on my server hosting side? ALTER PROCEDURE [dbo].[GetCo]ASSELECT * FROM Coaches
View 2 Replies View RelatedHi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Project](
[ProjID] [varchar](300) NOT NULL,
[ProjType] [varchar](20) NULL,
[ProjectTitle] [varchar](max) NULL,
[ProjectDetails] [varchar](max) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](max) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED
(
[ProjID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
-----------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Report](
[ReportName] [varchar](50) NOT NULL,
[ProjID] [varchar](300) NULL,
[DeptCode] [varchar](50) NULL,
[ProjType] [varchar](50) NULL,
[ProjectTitle] [varchar](500) NULL,
[ProjectDetails] [varchar](3000) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](50) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED
(
[ReportName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
--------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectStatus](
[ProjectStatusID] [int] IDENTITY(1,1) NOT NULL,
[ProjectStatus] [varchar](max) NULL,
CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED
(
[ProjectStatusID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
-----------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectManager](
[ProjectManagerID] [int] IDENTITY(1,1) NOT NULL,
[FName] [varchar](50) NULL,
[LName] [varchar](50) NULL,
[Inactive] [int] NULL,
CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED
(
[ProjectManagerID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetReportQuery]
(
@ReportName varchar(100)
)
AS
BEGIN
SET
NOCOUNT ON
IF @ReportName IS NULL
BEGIN
RETURN -1
END
ELSE
BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50)
SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus
FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S
WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName))))
AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL)
AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL)
AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL)
AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL)
AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL)
AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL)
)
END
END Can someone see what's wrong? Thanks.
Hi,
I created a temporary table inside a stored procedure called TmpCursor and the last time I include this..
Select * from #TmpSummary
GO
Inside my web page, I have the following code...
QrySummary = "Exec TmpCursor"
Set rsSummary = Server.CreateObject("ADODB.RecordSet")
rsSummary.Open QrySummary, cnCentral
cnCentral is my sqlconnection string..
This is the error I got when viewing the page
Error Type:
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
BTW, the stored procedure works fine in Query Analyzer.
TIA
Hi,
How to return values from stored procedures?? I have a value whose variable would be set thru this sp and it should return this value. How to do this?
Thanks,
Anyone know how to return a sql command from a sql server stored procedure using asp.net c# and sql server 2000?I'm trying to debug the stored proc and thought the easiest way would be to return the insert command and debug it in the query analyzer.Thanks.Doug.
View 2 Replies View RelatedHELP HELP HELP!!
I have two questions.
I'm using VB 6.0 with ADO to SQL 7.0. My stored procedure works fine with Query Analyzer. I pass one parameter.
sp_test "1234"
And I get a recordset returned.
The stored procedure looks like this:
CREATE PROCEDURE sp_test
@facility_key varchar(255) = null
AS
/*DECLARE @sql1 varchar(255)*/
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
/*IF @facility_key <> null
PRINT "0"
BEGIN
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
END*/
When I uncomment the commented lines, I can still get a recordset returned using the query analyzer. And I get the same recordset returned when I use VB ADO and leave the stored proc lines commented out. However, when I call the procedure using the same VB code with the stored proc lines uncommented, I get -1 returned for rs.recordcount:
Private Sub Main_Click()
On Error GoTo Err_Main
Dim lsFacility As String
Dim lsReportName As String
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Dim gconn As ADODB.Connection
Dim param_facility_key As ADODB.Parameter
Dim gConnString As String
gConnString = "Trusted_Connection=Yes;UID=sa;PWD=yoyo;DATABASE=y ada;SERVER=ya;Network=dbnmpntw;Address=ya;DRIVER={ SQL Server};DSN=''"
Set gconn = New ADODB.Connection
Set rs = New ADODB.Recordset
Set cmd = New ADODB.Command
gconn.Open gConnString
cmd.Parameters.Refresh
lsFacility = "1234"
Set param_facility_key = cmd.CreateParameter("facility_key", adVarChar, adParamInput, 255)
cmd.Parameters.Append param_facility_key
param_facility_key.Value = lsFacility
cmd.CommandType = adCmdStoredProc
cmd.CommandText = "sp_reimbursement_report_test"
cmd.Name = "sp_reimbursement_report_test"
Set cmd.ActiveConnection = gconn
rs.Open cmd, , adOpenKeyset, adLockOptimistic
MsgBox rs.RecordCount
Exit_Main:
Screen.MousePointer = vbNormal
gconn.Close
rs.Close
Exit Sub
Err_Main:
Screen.MousePointer = vbNormal
MsgBox "Error " & Err.Number & " has occurred: " & Err.Description
End Sub
Here are my questions:
1. Why don't I get a recordset returned to VB if I have anything (the commented lines) except a simple SELECT statement in the stored proc.
2. Why must I do a Print "0" (or anything) command in the stored procedure within the IF statement to see a recordset return?
TIA for any help you can give....this one has been keeping me up....and my company down.
JWB
Dear all,
I have a big problem in using SQL Server stored procedures:
When I have two select statement in the same procedure, the first one will use for returning specific information for the second one to select appropiate result to the client, but the stored procedure just return the first select statement recordset! What can I do? (I use VB Data Environment to access the stored procedures)
This is a strange issue I'm encountering. I have a websphere application that calls a basic Stored Procedure in SQL Server 2000. The SP works fine. Now, if I create a TEMP table in the SP, I no longer get a resultset. No results are returned by the websphere. Even if I do not use the temp table... that is, I just create the temp table like so:
SELECT region_code,
OperGroup_Code,
country_name,
MajorGroup_Name,
RptgEntity_Name,
shell_code,
CRC,
' ' as right_type
INTO #tmpTShell FROM TShell WHERE 1=0
But I then grab my records using the query that works (querying another table), I still get NULL for records returned. Only when I comment out the above TEMP table creation do I get the results back in websphere. Another strange thing is that this works fin in SQL analyzer. WRegardless of whether I have the temp table creation commented out or not, it always works in the Query Analyzer whe I call the SP. It just seems to effect WebSphere or my java code in that it returns null if I create the temp table.
Has anyone ever experienced anthying like this? Any help would be greatly appreciated!
Thanks.
I can't even think how I would go about beginning to solve this problem, so any tips/pointers would help immensely.
I'm running a query that builds a time line of a process using messages in a table called Event. The Event table is joined with a table called Charge_Info based on N_Charge, the charge number. It builds the time line by looking in the Message field for various text strings that signify a specific point has been reached in the process and builds a record for each charge number with data from N_Charge and timestamps from the events table.
The problem I have is that there aren't records for every event in the Event table, ie, for every charge that doesn't have a "Heating Complete" event, the returned recordset has no mention of that charge. The system recording these events is pretty much crap, but there's nothing to be done about that right now. What I want to happen is for the query to return every record in N_Charge and a null string or NULL in place of the non-existing events.
The stored procedure is pasted below. I pass the dates I want and select from the Event table into a temporary table and then do the join/text search on that table. It helped performance tremendously compared to the text search searching all 400,000+ records in the Event table and then doing the date select.
Thanks for any help in advance,
TimC
SELECT EVENT.Time_Stamp, EVENT.N_CHARGE, EVENT.Message
INTO #EVENT_FILTERED
FROM EVENT
WHERE (EVENT.TIME_STAMP >= @StartDate) AND (EVENT.TIME_STAMP < @EndDate)
SELECT CHARGE_INFO.TIME_STAMP, CHARGE_INFO.N_CHARGE, CHARGE_INFO.BASE,
CHARGE_INFO.N_RECIPE, CHARGE_INFO.N_FCE, CHARGE_INFO.N_CH,
CHARGE_INFO.HEIGHT, CHARGE_INFO.CREW_EOC, CHARGE_INFO.CREW_SOC,
CHARGE_INFO.TIME_START, CHARGE_INFO.TIME_FCE_SET,
CHARGE_INFO.TIME_FCE_IGNITED, CHARGE_INFO.TIME_FCE_REMOVED,
CHARGE_INFO.TIME_CH_SET, CHARGE_INFO.TIME_CH_REMOVED,
CHARGE_INFO.WEIGHT, CHARGE_INFO.TIME_POST_PRG_COMPLETE,
EVENT.TIME_STAMP AS IC_Set,
EVENT_1.TIME_STAMP AS Cycle_Started,
EVENT_2.TIME_STAMP AS Leak_Test_Done,
EVENT_3.TIME_STAMP AS End_N2_PrePurge,
EVENT_4.TIME_STAMP AS Heating_Complete,
EVENT_5.TIME_STAMP AS Split_Temp_Met,
EVENT_6.TIME_STAMP AS End_N2_Final_Purge,
EVENT_7.TIME_STAMP AS Inner_Cover_Removed,
EVENT_8.TIME_STAMP AS Cycle_Complete,
EVENT_9.TIME_STAMP AS Post_Purge_Time_Met
FROM dbo.CHARGE_INFO CHARGE_INFO LEFT OUTER JOIN
#EVENT_FILTERED EVENT_9 ON CHARGE_INFO.N_CHARGE = EVENT_9.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_7 ON CHARGE_INFO.N_CHARGE = EVENT_7.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_6 ON CHARGE_INFO.N_CHARGE = EVENT_6.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_8 ON CHARGE_INFO.N_CHARGE = EVENT_8.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_5 ON CHARGE_INFO.N_CHARGE = EVENT_5.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_3 ON CHARGE_INFO.N_CHARGE = EVENT_3.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_1 ON CHARGE_INFO.N_CHARGE = EVENT_1.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_4 ON CHARGE_INFO.N_CHARGE = EVENT_4.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_2 ON CHARGE_INFO.N_CHARGE = EVENT_2.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT ON CHARGE_INFO.N_CHARGE = EVENT.N_CHARGE
WHERE (EVENT.MESSAGE LIKE '%Inner Cover Set%') AND
(EVENT_1.MESSAGE LIKE '%Cycle Started%') AND
(EVENT_2.MESSAGE LIKE '%Leak Test Done%') AND
(EVENT_3.MESSAGE LIKE '%End of N2 PrePurge%') AND
(EVENT_4.MESSAGE LIKE '%Heating Complete%') AND
(EVENT_5.MESSAGE LIKE '%Split Temp Met%') AND
(EVENT_6.MESSAGE LIKE '%End N2 Final%') AND
(EVENT_7.MESSAGE LIKE '%Inner Cover Removed%') AND
(EVENT_8.MESSAGE LIKE '%Cycle Complete%') AND
(EVENT_9.MESSAGE LIKE '%Post Purge Time Met%') AND
(CHARGE_INFO.TIME_STAMP >= @StartDate) AND
(CHARGE_INFO.TIME_STAMP < @EndDate)
ORDER BY CHARGE_INFO.BASE, CHARGE_INFO.TIME_STAMP DESC
The stored procedure I created returns all records from the table if no parameters are passed, as expected. When I pass in the only parameter, I get 0 records returned when there should be one or more returned. I'm sure it's something simple in my syntax, but I don't see it.
This call returns all records:
exec webservices_BENEFICIAL_USES_DM_SELECT
This call returns 0 records, when it should return 1:
exec webservices_BENEFICIAL_USES_DM_SELECT @DISPOSAL_AREA_NAME='Cell 8'
Here is the stored procedure:
ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT]
-- Add the parameters for the stored procedure here
@DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @DISPOSAL_AREA_NAME IS NULL
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
END
ELSE
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
WHEREDISPOSAL_AREA_NAME = '@DISPOSAL_AREA_NAME'
END
END
ALTER PROCEDURE [dbo].[getFavoriteList]
as
begin
SET NOCOUNT ON
select manufacturer_name from dbo.Favorite_list
end
execute getFavoriteList
It reruns infinite data and finally i got message as
Msg 217, Level 16, State 1, Procedure getFavoriteList, Line 15
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
I am trying to return the dataset from stored procedure.
Hi All. My question is this. I have a complex stored procedure in SQLServer which works fine when I run it in Query Analyzer. However, whenI call it within my ASP script, it returns nothing, and sometimes locksup. If I change my script to call other existing stored procedures itworks fine. It's just with this particular stored proc. I have triedvarious DB calls in ASP, such as opening the recordset through an ADOconnection and through the Command object but to no avail. Here is mySQL:SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOALTER PROCEDURE dbo.sp_getProfessionalsByTypeID@typeID intASdeclare @catID intdeclare @userID intdeclare @strUserName varchar(100)declare @strFirstName varchar(100)declare @strLastName varchar(100)declare @strTypeName varchar(100)declare @strCategoryName varchar(100)declare @strPictureURL varchar(100)declare @sql varchar(1000)declare @a varchar(100)declare @b varchar(100)declare @c varchar(100)declare @d varchar(100)beginset @a=''set @b=''set @c=''set @d=''--Create Temp TableCREATE TABLE #QueryResult (nCatID int, nTypeID int, nUserID int,strUserName varchar(100), strFirstName varchar(100), strLastNamevarchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100))--Search QuerybeginINSERT #QueryResultSELECTdbo.tbl_musician_type.nCatID, dbo.tbl_musician_type.nTypeID,dbo.tbl_users.nUserID, dbo.tbl_users.strUserName,dbo.tbl_users.strLastName,dbo.tbl_users.strFirstName,dbo.tbl_musician_type.strTypeName, dbo.tbl_category.strCategoryName,dbo.tbl_professionals.strPictureURLFROMdbo.tbl_musician_type INNER JOINdbo.tbl_category ON dbo.tbl_musician_type.nCatID= dbo.tbl_category.nCategoryID INNER JOINdbo.tbl_profile ONdbo.tbl_musician_type.nTypeID = dbo.tbl_profile.nTypeID INNER JOINdbo.tbl_users ON dbo.tbl_profile.nUserID =dbo.tbl_users.nUserID LEFT OUTER JOINdbo.tbl_professionals ON dbo.tbl_users.nUserID= dbo.tbl_professionals.nUserIDWHEREdbo.tbl_musician_type.nTypeID = @typeIDend--Create Temp TableCREATE TABLE #QueryResult2 (ID int IDENTITY,nCatID int, nTypeID int,nUserID int, strUserName varchar(100), strFirstName varchar(100),strLastName varchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100), strArtist varchar(100),strAlbumTitle varchar(100), strRecordLabel varchar(100), strYearvarchar(100))--Now Declare the Cursor for Speakersdeclare cur_musicians CURSOR FOR--Combined Results Groupedselect distinct nCatID, nTypeID, nUserID, strUserName, strLastName,strFirstName, strTypeName, strCategoryName, strPictureURLFrom #QueryResultopen cur_musiciansfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURL--Loop Through Cursorwhile @@FETCH_STATUS = 0beginSELECT TOP 1 @a = strArtist, @b=strAlbumTitle,@c=strRecordLabel, @d=strYearFROM dbo.tbl_profile_discogwhere nTypeID = @typeID AND nCategoryID = @catID AND nUserID =@userIDinsert #QueryResult2select @catID as nCatID, @typeID as nTypeID, @userID as nUserID,@strUserName as strUserName, @strLastName as strLastName, @strFirstNamestrFirstName, @strTypeName as strTypeName, @strCategoryName asstrCategoryName, @strPictureURL as strPictureURL, @a ashighlightArtist, @b as highlightAlbumTitle, @c as highlightRecordLabel,@d as highlightYearfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURLset @a = ''set @b=''set @c=''set @d=''endselect * from #QueryResult2 TI--Clean Upclose cur_musiciansdeallocate cur_musiciansdrop table #QueryResultdrop table #QueryResult2endGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
View 5 Replies View RelatedHi Using Following Stored Procedure,
Which always returns Null,
What s the error,
CREATE PROCEDURE prLoginAuth
(
@pStrUserName varchar(50),
@pStrPassword varchar(50),
@pOutput Varchar(20) Output
)
AS
Declare @V_Facilities Varchar(50)
SELECT Facilities=@V_Facilities From UserLoginFacilities where LoginID=(Select LoginID From UserLogin where LoginName=@pStrUserName and Password=@pStrPassword)
If(@V_Facilities=null)
Set @pOutput = @V_Facilities
Return @pOutput;
Else
Set @pOutput = @V_Facilities
Return @pOutput;
GO
Anyone correct this query , I want return the output from this procedure
Thanx in advance
Selva.R