Stored Procedure Runs Slow Only Sometimes
Jan 6, 2006
When i execute a stored procedure it generally takes about half a second to run but sometimes it takes 20 to 30 seconds. I am the only one using the server so I know it is not due to other traffic. I have looked at Profiler and nothing looks out of the ordinary. Another observation is that the slow ones are always near eachother. I will have about 10 fast executions and then 3 slow ones and then back to fast ones. Has anyone seen anything like this before?
View 5 Replies
ADVERTISEMENT
Apr 23, 2008
Performance issue.
I have a very complex Stored Procedure called by a Job that is Scheduled to run every night.
It's execution takes sometimes 1 or 2 hours and sometimes 7 hours or more.
So, if it is running for more than 4 hours I stop the Job and I run the procedure from a Query Window and it never takes more than 2 hours.
Can anyone help me identify the problem ? I want to run from the Job and not to worry about it.
Some more information:
- It is SQL 2000 Enterprise with SP4 in a Cluster (It happens the same way in any node).
- The SQL Server and SQL Agent services run using a Domain Account that have full Administrative access.
- When I connect to a Query Window I also use a Windows Account.
- There is no locks or process bloking or being blocked while the job is running.
- Using the Task Manager the processor activity is ok, no more than 30 % in any processor.
View 15 Replies
View Related
Oct 9, 2001
I have a stored proceedure (which I will tag on at the end for those interested) which is taking at least 15 minutes to run when executed, but completes in 1 minute when the tsql statement is run in Query Analyser. Why is this?
I suspect that it may be connected to table indexing, but why then is this bypassed when QA is used?
Any advice appreciated.
Derek
************************************************** ***********************
IF EXISTS (SELECT * FROM sysobjects WHERE id = object_id(N'dbo.sp_ValidateAIGL') AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE dbo.sp_ValidateAIGL
GO
CREATE PROCEDURE dbo.sp_ValidateAIGL
@IGLPeriodIDInt,
@IGLProgramIDInt
AS
/* ************************************************** ************************
Name:sp_ValidateIGL
Author:CL
Date:19-Jan-2001
Notes:
************************************************** ************************ */
--SET NOCOUNT ON
DECLARE@TaxYearChar(5),
@FrequencyChar(1),
@PeriodNo Int,
@ProgramLogIDInt
SELECT@TaxYear = TaxYear,
@PeriodNo = PeriodNo,
@Frequency = Frequency
FROMtbl_IGLPeriods
WHEREIGLPeriodID = @IGLPeriodID
SELECT @ProgramLogID = (SELECT ProgramLogID FROM tbl_SYSProgramLogs WHERE IGLProgramID = @IGLProgramID AND IGLPeriodID = @IGLPeriodID)
CREATE TABLE #IGLErrors
(
KeyFieldChar(24),
ErrorIDInt,
DescriptionVarChar(255)
)
-- *** Global Non Program Specific Data Errors ***
-- CHECK - that there are records in the DEB_IGL_PAYROLL_OUTPUT file.....none and the routine failed...
IF NOT EXISTS(SELECT * FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 100, 'No records were processed by the IGL run!'
SELECT * FROM #IGLErrors
-- CHECK - search for any records where the employee's EXPENSE_CODE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
2,
'Employee "' + COALESCE(NULLIF(RTRIM(EmpNo), ''),
'<Missing Employee>') + '" (Organisation Unit - ' + COALESCE(RTRIM(OrgUnitCode),
'<No Organisation Unit>') + ') does not have a EXPENSE_CODE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(ExpenseCode, '') IS NULL
ANDIGLProgramID = @IGLProgramID
SELECT * FROM #IGLErrors
-- CHECK - check that the BALANCE of DEBITs match the balance of CREDITs
IF (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 1 AND IGLProgramID = @IGLProgramID) <> (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 0 AND IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 3, 'The total cash value for DEBIT elements does not match the total cash for CREDIT elements.'
SELECT * FROM #IGLErrors
-- *** Program 1 and 2 errors ***
IF @IGLProgramID IN (1, 2)
BEGIN
-- CHECK - search for any records where the employee's COST_CENTRE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
1,
'Employee "' + NULLIF(RTRIM(EmpNo), '') + '" (Organisation Unit = ' + RTRIM(OrgUnitCode) + ') does not have a COST_CENTRE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(CostCenter, '') IS NULL
ANDIGLProgramID = @IGLProgramID
SELECT * FROM #IGLErrors
-- Check for EMPLOYEEs that were not transfered to the PAYROLL output (usually caused by missing ORG_UNITs or not picked up in
-- the DEB_VIEW_APPOINTEE view...)
INSERT INTO #IGLErrors
SELECT DISTINCT
EMP_NO,
11,
'Employee "' + RTRIM(EMP_NO) + '" was excluded from the summary. Check their Organisation Unit codes!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERENOT EMP_NO IN (SELECT DISTINCT EmpNo FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
ANDPERIOD_NO = @PeriodNo
ANDTAX_YEAR = @TaxYear
SELECT * FROM #IGLErrors
-- Check that there are no ELEMENTS in the COSTING_OUTPUT table that don't exist in the tbl_IGLElements table
INSERT INTO #IGLErrors
SELECT DISTINCT
ELEMENT,
12,
'Element "' + RTRIM(ELEMENT) + '" does not exist in the IGL Interface Elements table!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERE ELEMENT NOT IN
(
SELECT DISTINCT Element
FROM tbl_IGLElements
)
ANDPERIOD_NO = @PeriodNo
SELECT * FROM #IGLErrors
END
-- *** Add a error to indicate the number of errors ***
IF EXISTS (SELECT * FROM #IGLErrors)
INSERT INTO #IGLErrors
SELECT 0,
0,
'Warning, there are ' + CAST(Count(*) AS VarChar(5)) + ' recorded errors!'
FROM#IGLErrors
-- Transfer the records to the ErrorsLog table ready for the user to view...
DELETE FROM tbl_SYSErrorsLog
INSERT INTO tbl_SYSErrorsLog (IGLProgramID, OutputLogID, KeyField, ErrorID, Description)
SELECT@ProgramLogID,
@IGLPeriodID,
KeyField,
ErrorID,
Description
FROM #IGLErrors
ORDER BY ErrorID
DROP TABLE #IGLErrors
SELECT *
FROM tbl_SYSErrorsLog
ORDER BY ErrorID
--SET NOCOUNT OFF
GO
GRANT EXECUTE ON dbo.sp_ValidateAIGL TO Public
GO
View 2 Replies
View Related
Jan 22, 2008
I think I may need help with query optimization.
We have a customer table and an address table. Each customer can have 1 or more addresses in the address table.
The task is to synchronize customer information from 2 entirely separate systems. I have a stored procedure that reads a text file (exported from the 'master' system) and updates all the customer records in the second system (which is in the sql server db). The queries themselves work. The data is accurate. My issue is with how long it takes the stored procedure to run. With over 11,000 records in the text file, the stored procedure sometimes takes over 3 hours to run.
That seems excessive to me. (and probably to those of you snickering in the back)
As an overview: my stored procedure does the following.
1) creates a temp table
2) dumps the data from the text file into the temp table
3) updates the address table with data from the temp table (records already there)
4) inserts records into the address table from the temp table (records not already there)
5) updates the customer table with an address id
6) drops the temp table
Any help/suggestions is appreciated. If you need more info, let me know.
View 10 Replies
View Related
Jan 8, 2008
Ok, I'll admit right off the bat that I never suspected that I'd ever raise this complaint, much less worry about how to fix the "problem" associated with it!
We're preparing to take a large set of changes (projects) to PeopleSoft Financials from development to test. The code is still somewhat rough, but it has been "desk checked" to ensure that it does what the developers think that it ought to do, and they've blessed it at that point. The code is now moving into the test phase, and the QA team is finding locking/blocking issues that we've never seen in this code before... Sort of a "lock avalanche" where no one process locks for very long, but many of them block one another to the point where applications actually "freeze" while almost never hitting a deadlock.
My solution was to create a "blitzkrieg" query / stored procedure that would periodically sample master.dbo.sysprocesses, master.dbo.sysdatabases, and apply one of the dm_ functions to gather information on locking, blocking, and deadlocking. My procedure runs nicely (it never hangs) and gets about 99.3% of the data that I want.
The problem is that the blasted query / stored procedure runs either too fast or too slow, depending on how you look at it. Because the dm_ function takes a few ms to run, there can be a situation where either a row appears as a false positive or as a missing row because of timing... Either the culprit shows up as a blocker, but by the time the victim spid is evaluated the block has cleared, or the row is skipped and by the time the victim is evaluated the block has occured.
The whole process runs in well under 100 ms when there is nothing to report, and I've never seen it run 200 ms yet under the worst conditions it has faced, so the code is fast... The problem is that I really don't want to try to enforce any kind of locking to resolve the issue, because that locking would impact performance and that is EXACTLY what I do NOT want to do.
Any suggestions?
-PatP
View 8 Replies
View Related
Oct 8, 2007
I have a stored procedure that syncs 2 databases. It runs fine if I go into the stored procedures and execute it manually, there are a few errors but it doesnt choke on them it completes with the desired end result. However if I create a job to run this dbo, it fails, The error log shows this:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
10/03/2007 16:06:00,sync,Error,0,MACHINENAME,sync,(Job outcome),,The job failed. The Job was invoked by User MACHINENAMEAdministrator. The last step to run was step 1 (sync).,00:00:19,0,0,,,,0
10/03/2007 16:06:00,sync,Error,1,MACHINENAME,sync,sync,,Executed as user: companyname. ... 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles __noelle(5281) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0(5036) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) New DNN User [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0000000(3795) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 007(8) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exis... The step failed.,00:00:19,14,3621,,,,0
So the error is 3621, and the severity is 14 which as I understand it means Insufficient Permissions.
I have already tried this:
Making the Job Agent service logon as MACHINeNAME/Administrator instead of System, giving the user here (companyname) more permissions, but I am at a loss as to why this runs ok when manually executed but fails when run as a job. I have created the job by scripting the dbo "Execute to a file" and having the job run that file as a step, I have also tried copying and pasting the code from the stored procedure into the job step. It always fails for the same reason.
I must say I am very new to SQL, I am a network admin and have inherited this database and server from another client and have to get this sync task to run daily at certain intervals.
Please can anyone shed light on this issue?
Thanks,
View 7 Replies
View Related
Dec 29, 2003
I have an stored procedure that takes 23 seconds to execute. However, the same query is executed in 4 seconds.
All the tests where made using the Query Analizer.
What could be wrong?
Thanks a lot in advance.
View 13 Replies
View Related
Apr 19, 2007
Hi there everybody,
I am writing a sales managing software using C# in .NET 2005.
The program was used to work properly with sql server 2000.
I decided to write a "FILE Version" of sofware using sql server express 2005 , and detached db from 2000 , attaching it to 2005 using AttachDBFileName clause in connection string.
But the problem is when program executes something like this:
EXEC [AddOrder] ...
two rows inserted instead of one.and when I use server explorer of VS2005 to launch SP, it works fine.
I should mention again that same code works correctly when I change connection string and force it to use sqlserver 2000.
Any ideas?
Kind Regards: Ali
View 6 Replies
View Related
Nov 8, 2006
I have a rather complex sp that runs for 4 minutes in SQL2000. It computes some messy oil and gas revenue/cost transactions. It involves lots of calls to functions that return single values of all types and also returns recordsets. There are all kinds of joins with temp and memory tables, etc. Just a mess, but it works. However, in SQL2005, it runs and apparently hangs, as it never ends.
I have run the Upgrade Advisor and otherwise, have not found any information that tells me that there are issues with functions or SQL-specific functions, tables, etc. that might cause this. Does anyone on this forum have some pointers on where I might look for assistance on this matter? Surely someone knows something about things working differently in 2005.
Thanks,
Jim
View 4 Replies
View Related
Jun 25, 2007
The query below runs in sub second time if I don't call it as a stored procedure. I have looked at the execution plan for both the query and the query as a stored procedure and they are the same.
When I put the query into a stored procedure it takes over 2 minutes to run.
All feedback (even the ugly stuff) is more than welcome. I want to master this issue and forever put it behind me.
This is the sql when I just execute it outright:1 DECLARE
2 @WebUserID nvarchar(20)
3 ,@DocumentTypeID int
4 ,@RouteID nvarchar(10)
5 ,@CustomerID nvarchar(15)
6 ,@DocumentIDPrefix nvarchar(20)
7 ,@StartDate datetime
8 ,@EndDate datetime
9 ,@OversoldOnly bit
10 ,@DexCustomersOnly bit
11 ,@DeviationsOnly bit
12 ,@CashNoPaymentOnly bit
13 ,@SignatureName nvarchar(45)
14 ,@SortExpression varchar(200)
15 ,@StartRowIndex int
16 ,@MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 WITH OrderedDocumentHistory AS
32 (
33 SELECT
34 dh.DocumentHistoryID
35 ,dh.DocumentID
36 ,dh.DocumentTypeID
37 ,dh.DocumentTypeDesc
38 ,dh.RouteID
39 ,dh.RouteDesc
40 ,dh.CustomerID
41 ,dh.CustomerName
42 ,dh.DocDate
43 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
44 ,ddt.Description AS 'SignatureReason'
45 ,a.Amount
46 ,ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC) AS 'RowNumber'
47 FROM
48 DocumentHistory dh
49 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
50 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
51 INNER JOIN
52 (
53 SELECT
54 DocumentHistoryID
55 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
56 FROM
57 DocumentHistoryItems dhia
58 GROUP BY
59 dhia.DocumentHistoryID
60 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
61 LEFT OUTER JOIN
62 (
63 SELECT DISTINCT
64 dca.DocumentID
65 ,1 AS 'HasReceipt'
66 FROM
67 DocumentCollections dca
68 ) AS dc ON dh.DocumentID = dc.DocumentID
69 WHERE
70 dh.DocDate BETWEEN @StartDate AND @EndDate
71 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
72 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
73 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
74 AND dh.DocumentID LIKE @DocumentIDPrefix
75 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
76 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
77 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
78 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
79 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
80 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
81 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
82 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
83 OR @WebUserID IS NULL)
84 )
85
86 SELECT
87 DocumentHistoryID
88 ,DocumentID
89 ,DocumentTypeDesc
90 ,RouteID
91 ,RouteDesc
92 ,CustomerID
93 ,CustomerName
94 ,DocDate
95 ,Amount
96 ,HasReceipt
97 ,SignatureReason
98 FROM
99 OrderedDocumentHistory
100 WHERE
101 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows) Here is the sql for creating the stored procedure. 1 CREATE Procedure w_DocumentHistory_Select
2 (
3 @WebUserID nvarchar(20)
4 ,@DocumentTypeID int
5 ,@RouteID nvarchar(10)
6 ,@CustomerID nvarchar(15)
7 ,@DocumentIDPrefix nvarchar(20)
8 ,@StartDate datetime
9 ,@EndDate datetime
10 ,@OversoldOnly bit
11 ,@DexCustomersOnly bit
12 ,@DeviationsOnly bit
13 ,@CashNoPaymentOnly bit
14 ,@SignatureName nvarchar(45)
15 ,@SortExpression varchar(200)
16 ,@StartRowIndex int
17 ,@MaximumRows int
18 )
19 AS
20 SET NOCOUNT ON
21
22 IF LEN(@SortExpression) = 0 OR @SortExpression IS NULL
23 SET @SortExpression = 'Number DESC'
24
25 IF @StartRowIndex IS NULL
26 SET @StartRowIndex = 0
27
28 IF @MaximumRows IS NULL
29 SELECT
30 @MaximumRows = COUNT(dh.DocumentHistoryID)
31 FROM
32 DocumentHistory dh;
33
34 WITH OrderedDocumentHistory AS
35 (
36 SELECT
37 dh.DocumentHistoryID
38 ,dh.DocumentID
39 ,dh.DocumentTypeID
40 ,dh.DocumentTypeDesc
41 ,dh.RouteID
42 ,dh.RouteDesc
43 ,dh.CustomerID
44 ,dh.CustomerName
45 ,dh.DocDate
46 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
47 ,ddt.Description AS 'SignatureReason'
48 ,a.Amount
49 ,CASE
50 WHEN @SortExpression = 'Number DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID DESC))
51 WHEN @SortExpression = 'Number ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID ASC))
52 WHEN @SortExpression = 'CustomerName DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName DESC))
53 WHEN @SortExpression = 'CustomerName ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName ASC))
54 WHEN @SortExpression = 'CompletedDate DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC))
55 WHEN @SortExpression = 'CompletedDate ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate ASC))
56 WHEN @SortExpression = 'RouteDescription DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc DESC))
57 WHEN @SortExpression = 'RouteDescription ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc ASC))
58 END AS 'RowNumber'
59 FROM
60 DocumentHistory dh
61 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
62 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
63 INNER JOIN
64 (
65 SELECT
66 DocumentHistoryID
67 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
68 FROM
69 DocumentHistoryItems dhia
70 GROUP BY
71 dhia.DocumentHistoryID
72 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
73 LEFT OUTER JOIN
74 (
75 SELECT DISTINCT
76 dca.DocumentID
77 ,1 AS 'HasReceipt'
78 FROM
79 DocumentCollections dca
80 ) AS dc ON dh.DocumentID = dc.DocumentID
81 WHERE
82 dh.DocDate BETWEEN @StartDate AND @EndDate
83 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
84 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
85 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
86 AND dh.DocumentID LIKE @DocumentIDPrefix
87 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
88 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
89 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL((SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
90 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
91 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
92 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
93 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
94 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
95 OR @WebUserID IS NULL)
96 )
97 SELECT
98 DocumentHistoryID
99 ,DocumentID
100 ,DocumentTypeDesc
101 ,RouteID
102 ,RouteDesc
103 ,CustomerID
104 ,CustomerName
105 ,DocDate
106 ,Amount
107 ,HasReceipt
108 ,SignatureReason
109 FROM
110 OrderedDocumentHistory
111 WHERE
112 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows)
Here is the code for calling the stored procedure:1 DECLARE @RC int
2 DECLARE @WebUserID nvarchar(20)
3 DECLARE @DocumentTypeID int
4 DECLARE @RouteID nvarchar(10)
5 DECLARE @CustomerID nvarchar(15)
6 DECLARE @DocumentIDPrefix nvarchar(20)
7 DECLARE @StartDate datetime
8 DECLARE @EndDate datetime
9 DECLARE @OversoldOnly bit
10 DECLARE @DexCustomersOnly bit
11 DECLARE @DeviationsOnly bit
12 DECLARE @CashNoPaymentOnly bit
13 DECLARE @SignatureName nvarchar(45)
14 DECLARE @SortExpression varchar(200)
15 DECLARE @StartRowIndex int
16 DECLARE @MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 EXECUTE @RC = [Odom].[dbo].[w_DocumentHistory_Select]
32 @WebUserID
33 ,@DocumentTypeID
34 ,@RouteID
35 ,@CustomerID
36 ,@DocumentIDPrefix
37 ,@StartDate
38 ,@EndDate
39 ,@OversoldOnly
40 ,@DexCustomersOnly
41 ,@DeviationsOnly
42 ,@CashNoPaymentOnly
43 ,@SignatureName
44 ,@SortExpression
45 ,@StartRowIndex
46 ,@MaximumRows
View 3 Replies
View Related
Mar 23, 2015
I have simple query which creates tables by passing database name as parameter from a parameter table .
SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .
Note** I am not passing any database of name '20'
Exception handler error :
ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------
Error in SSIS
[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .
View 6 Replies
View Related
Jul 18, 2006
Some users complain that there computers run slow around noon. later it is fine. Anybody can tell me what is the problem? We have entivirus software installed on. Also i am runing back up database on the server. Many thanks.
View 6 Replies
View Related
Sep 27, 2001
Hello ,
I'm a newbie,I programmed a store procedure,and when it runs in query analyzer,
I get results very fast,but when I add it in a job,then this job run very very slow,
(I add records and delete records in the SP), WHY?
TIA!
James
View 2 Replies
View Related
Oct 22, 2007
We are having issues w/ a stored proc call in our application. When I run the proc through a query window in Mgmt Studio, it comes back in .3 seconds. However, when the application runs the proc (w/ the same parameters), it takes 30 seconds for the proc to complete. When I run a trace with the proc call through Mgmt Studio, it says 4000 read, but through the app, it says 4 million reads. What is happening?? (app uses Hibernate 3.2/ Java 1.5/ JDBC)
Thanks.
View 9 Replies
View Related
Apr 30, 2008
When the same code is executed in query analyzer it takes 2s instead of 20s when executing the sp. Any idea?
View 9 Replies
View Related
Feb 16, 2001
I have SQL Server and OLAP Server running on an NT Server box, and a pc running NT Workstation which has OLAP Manager installed on it. I can register the OLAP Server just fine in OLAP Manager, but it takes about 30sec to a minute for the pc to actually connect to the server.
We've also installed SQL Server and OLAP Server on a Win 2000 machine, and the OLAP connection is faster.
Could this be related to a network routing issue, OLAP or SQL server install issue?
View 2 Replies
View Related
Jan 20, 2005
Dear Reader(s),
Is there anyway to write the following stored procedure without the loop so that it goes much faster? :confused:
----------------------------------------------------------------------------
use MJ_ReportBase
go
if exists(select 1 from sysobjects where type='P' and name='sp_Periode')
begin
drop procedure sp_Periode
end
go
create procedure sp_Periode
@start int
, @stop int
as
declare @x int
set @x = 0
set @x=@start
delete from tbl_periode
while (@x>=@stop)
begin
-- ---
-- ---
-- Create table tbl_inout
if exists(select 1 from sysobjects where type='U' and name='tbl_inout')
begin
drop table tbl_inout
end
select datetimestamp,accname,badgeid,personname,inoutreg into tbl_inout from WinXS..x18 where convert(varchar,datetimestamp,120)+' '+ltrim(str(id))+' '+ltrim(str(badgeid)) in
(select convert(varchar,max(datetimestamp),120)+' '+ltrim(str(max(id)))+' '+ltrim(str(badgeid)) as datetimestamp from WinXS..x18 where (accname='Kelder -1' or accname='Tnk Entree') and convert(varchar,datetimestamp,105)=convert(varchar ,getdate()-abs(@x),105) group by badgeid)
and badgeid>0
order by personname
-- ---
-- ---
-- Create table tbl_result
if exists(select 1 from sysobjects where type='U' and name='tbl_result')
begin
drop table tbl_result
end
-- ---
-- ---
select
convert(varchar,datetimestamp,105) 'DATUM'
, badgeid 'PAS'
, initials 'VOORNAAM'
, personname 'NAAM'
, convert(varchar,min(datetimestamp),108) 'MIN'
, convert(varchar,max(datetimestamp),108) 'MAX'
into
tbl_result
from
WinXS..x18
where
convert(varchar,datetimestamp,105)=convert(varchar ,getdate()-abs(@x),105)
and
accname in ('Kelder -1','Tnk Entree')
and badgeid>0
group by
convert(varchar,WinXS..x18.datetimestamp,105)
, badgeid
, initials
, personname
order by
initials
, personname asc
, convert(varchar,datetimestamp,105) asc
-- ---
-- ---
-- Rapportage tabel
insert into
tbl_periode
select
tbl_result.datum as DATUM
, ltrim(ltrim(rtrim(tbl_result.naam))+' '+ltrim(rtrim(isnull(tbl_result.voornaam,' ')))) as NAAM
, tbl_result.min as MIN
, tbl_result.max as MAX
, case tbl_inout.inoutreg when 1 then 'in' when 2 then 'out' else 'err' end as [IN/OUT]
, substring('00000',1,5-len(tbl_result.pas))+ltrim(str(tbl_result.pas)) as PAS
from
tbl_inout,tbl_result
where
tbl_result.datum+' '+tbl_result.max+' '+ltrim(str(tbl_result.pas))
= convert(varchar,tbl_inout.datetimestamp,105)+' '+convert(varchar,tbl_inout.datetimestamp,108)+' '+ltrim(str(badgeid))
order by
tbl_result.naam asc
-- ---
-- ---
--
set @x=@x-1
end
go
print 'Klaar!'
--------------------------------------------------------------------------
What it does is determining the minimum entry time and the maximum exiting time per day of people going true the main entrance of a building.
Many thanks in advance.
:)
View 3 Replies
View Related
Jun 29, 2007
Hello,
I have a big problem with slow execution of stored procedure in SQL Server 2005 but I really don't understand the reason. I have a database with large table (about 400 million rows) and simple stored procedure to get data from that table (one select statement to select time and value columns).
Strange thing is that if I call that stored procedure from .net application (native SqlDataProvider) it takes about 6 seconds to execute but if I call the same procedure with the same parameters from within SQL Server Management Studio it takes only 25 milliseconds to execute!
I've noticed that from .net, procedure is called with binary data and in Management Studio sql script is executed so I've copied/pasted the script from Management Studio to .net code and again the same thing happens (6 seconds from .net and 25ms from Management Studio). I traced executions with SQL Profiler and everything seems to be identical for both applications except it takes much longer time for .net application.
Both SQL Server Management Studio and .net application are on the same machine and SQL Server is on another.
This is the query that when executed in Management Studio takes 25ms:
EXEC [dbo].[GetRawData] @pcu = N'DV_ZERJ_HEV1',@tag = N'MJERENO',@from = N'20070629 07:00:00',@to = N'20070629 08:00:00'
This is the same query in .net application code that takes 6 seconds to execute:
sqlCommand = new SqlCommand("EXEC [dbo].[GetRawData] @pcu = N'DV_ZERJ_HEV1',@tag = N'MJERENO',@from = N'20070629 07:00:00',@to = N'20070629 08:00:00'",sqlConnection);
sqlReader = sqlCommand.ExecuteReader();
At first I thought that Management Studio somehow caches results but if I change parameters of stored procedure it always takes less than 30ms to execute.
I really don't understand this. Please, help!
View 7 Replies
View Related
Jan 9, 2008
We have a stored procedure which is running fine on a SQL server 2000 from Query Analyzer. However, when we try to execute the same stored procedure from ADO.NET in an executable, the execution is hung or takes extremely long. Does anyone have any ideas or suggestions about how it could happen and how to fix. thanks
View 22 Replies
View Related
May 24, 2008
I am using SSIS packages for data transfer, When i run the package on virtual server it takes more time as when run on a PC. After analysing i found that Package when run on Virtual server takes time in startup around (50 sec) or so.Could anyone help me with a little bit of detail description as to why it runs slow.
View 10 Replies
View Related
Jul 25, 2006
Hi all,
I have a webpage with a Datagrid that populates using a table adapter from a Stored procedure that exists in my SQL Database...If I run the Stored procedure in SQL Directly then it takes 20 Secs to return all records...If I run the webpage then it takes just over 20 Secs..
Great you say..But If I have the sorting option set in ASP.net and I click on a column to sort then off the page goes for another 20 secs to sort the data..
Is there a better way to do what I am doing here that will speed up the page load..
Ie..the data is returned once and then sorted...
Is it Better / Quicker for me to create a table using the stored procedure and link to this from the website..Updating the table every couple of minutes ?
Any advice please ?
Ray..
View 4 Replies
View Related
Dec 5, 2006
I have developed a stored procedure that filters a view that is a union of several different tables. This provides status information for items across our warehouse management system. This system seems to work very well and normally processes results very quickly (< 3 seconds). However, occasionally (every few days) we begin to see timeouts on the query after 3 minutes of processing. I can watch this process in SQL Profiler and see that the query is timing out after 180 seconds, which is the timeout we have for the query within the DAL. When I copy the line from the SQL Profiler and execute it directly in SSMS, the query executes in less than 2 seconds. I first thought that somehow this had to do with execution plans, but when I try to reload the page again, which executes the query, it still times out. I did add a OPTION(KEEPFIXED PLAN) to the sproc, and that seemed to speed things up for the time, but I am not sure if this is even the problem and what the optimal solution would be. Any thoughts spring to mind?
Thanks, Steve
View 3 Replies
View Related
Mar 1, 2005
I have a big table A_newHistory (more than 2 million rows) with primary key fund_id + date_price . This table has to be updated every 2 hours from XML.
Every row in XML must be inserted or updated (if current id and date already exist in the table) in the A_newHistory.
The following procedure works but very slow...
How can I optimize that?
================================================== =======
CREATE PROCEDURE spSaveFundsAdjustedClose
@XML ntext
AS
DECLARE @fund_id int
DECLARE @date_price datetime
DECLARE @adj_closed float
DECLARE @XMLDoc int
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
BEGIN TRANSACTION
EXEC sp_xml_preparedocument @XMLDoc OUTPUT, @XML
DECLARE MutualFunds_Cursor CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT *
FROM OPENXML (@XMLDoc , '/xml/a', 1)
WITH ([id] INT,[date] datetime, price float)
OPEN MutualFunds_Cursor
FETCH NEXT FROM MutualFunds_Cursor
INTO @fund_id, @date_price, @adj_closed
WHILE @@FETCH_STATUS = 0
BEGIN
IF EXISTS (SELECT * FROM A_newHistory
WHERE id_fund = @fund_id AND date_price = @date_price)
BEGIN
UPDATE A_newHistory
SET adj_close = @adj_closed
WHERE id_fund = @fund_id AND date_price = @date_price
END
ELSE
BEGIN
INSERT INTO A_newHistory
VALUES(@fund_id, @date_price, @adj_closed)
END
IF @@Error <> 0
BEGIN
ROLLBACK TRANSACTION
SELECT -1
RETURN
END
FETCH NEXT FROM MutualFunds_Cursor
INTO @fund_id, @date_price, @adj_closed
END
EXEC sp_xml_removedocument @XMLDoc
CLOSE MutualFunds_Cursor
DEALLOCATE MutualFunds_Cursor
COMMIT TRANSACTION
SELECT 0
GO
================================================== =======
View 1 Replies
View Related
Jul 20, 2005
Hi,Plz, I need some info (SQL2000) :)A stored procedure is like this:"Select table1.id, table1.txt, (select table2.nr from table2 wheretable2.fk_table1=table1.id) as nr where table1.id<>10"The essence here is that "select table2.nr from table2 wheretable2.fk_table1=table1.id" returns either the integer in table2.nr, or NULLif there isnt a match. The whole sentence runs EXTREMELY slow...3-4 sec.What is wrong?"select table2.nr from table2 where table2.fk_table1=table1.id" runs quicklyoutside the stored procedure. The original sentence without the "nr" (Selecttable1.id, table1.txt where table1.id<>10) runs quickly too...But together it slows down dramatically..why? I should mention that thesub-query could return NULL if theres no match in table2...But i cant seewhy that should slow things down (remember - it runs fine outside the SP)?Thx,PipHans---Outgoing mail is certified Virus Free.Checked by AVG anti-virus system (http://www.grisoft.com).Version: 6.0.518 / Virus Database: 316 - Release Date: 11-09-2003
View 3 Replies
View Related
Feb 19, 2007
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
View 3 Replies
View Related
Nov 30, 2007
I hav the following problem. I have written an stored procedure in sql server 2000 as the following
CREATE PROCEDURE dbo.pa_rellena
@pFechaInicio datetime
AS
declare @pFechaFin datetime
declare @auxcod_cen char(10)
declare @importeEfectivo decimal(17,2)
declare @importeTarjetas1 decimal(17,2)
declare @importeTarjetas2 decimal(17,2)
declare @importeVales decimal(17,2)
declare @importeTalones decimal(17,2)
declare @importeGastos decimal(17,2)
select @pFechaFin=@pFechaInicio+1
--Borramos las tablas temporales si las hemos creado con anterioridad y no se han borrado
if object_id('tmpCentros') is not null
drop table tmpCentros
if object_id('tmpCentros2') is not null
drop table tmpCentros2
if object_id('tmpMaxCajas') is not null
drop table tmpMaxCajas
if object_id('tmpCajasCentro') is not null
drop table tmpCajasCentro
if object_id('tmpVales') is not null
drop table tmpVales
if object_id('tmpDiarioEfectivo') is not null
drop table tmpDiarioEfectivo
if object_id('tmpDiarioTalones') is not null
drop table tmpDiarioTalones
if object_id('tmpDiarioTarjetas') is not null
drop table tmpDiarioTarjetas
if object_id('tmpDiarioSegundaForma') is not null
drop table tmpDiarioSegundaForma
if object_id('tmpDiarioGastosTarjetas') is not null
drop table tmpDiarioGastosTarjetas
if object_id('temp1') is not null
drop table temp1
--Seleccionamos todos los centros de Salvador Bachiller
select * into tmpCentros2
from centros
where centros.tienda=1
order by cod_cen
--Seleccionamos el maximo de cajas por cada centro
select cod_cen, max(cod_caja) as cajas into tmpMaxCajas
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
order by cod_cen
--Mezclamos los centros con el maximo de cajas
select c.cod_cen, c.Centro, c.Direccion, c.localidad, c.provincia, c.cpostal, c.telefono, m.cajas, operaciones, cajas_tot, tienda, franquicia into tmpCentros
from tmpCentros2 as c left outer join tmpMaxCajas as m on c.cod_cen=m.cod_cen
--Cajas por centro
select distinct cod_cen as cod_cen, cod_caja as cod_caja into tmpCajasCentro
from cierrecaja
where fecha>=@pFechaInicio and fecha<@pFechaFin
--Los vales de cada centro
select cod_cen,sum(importe) as imp1 into tmpVales
from vales where
fecha>=@pFechaInicio and fecha<@pFechaFin
group by cod_cen
--Efectivo de cada centro
select cod_cen,'01' as vendedor,'EFECTIVO' as descripcion, (sum(diario.TotEuro)-Sum(Diario.Imppa2)) as importe1,0 as exp1, (sum(Diario.TotEuro)-sum(Diario.imppa2)) as importe2 into tmpDiarioEfectivo
from diario
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='01'
group by cod_cen
--Talones por centro
select centros.cod_cen,'02' as vendedor,'TALONES' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro) as importe2 into tmpDiarioTalones
from centros inner join diario on centros.cod_cen=diario.cod_cen
where fecha>=@pFechaInicio and fecha<@pFechaFin and diario.cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and diario.cod_pago='02'
group by centros.cod_cen
--Tarjetas por centro
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion, sum(diario.TotEuro) as importe1,0 as exp1, sum(Diario.TotEuro*(FPago.Descuento/100)) as importe2, sum(Diario.TotEuro) - sum(Diario.TotEuro*(FPago.Descuento/100)) as importe3 into tmpDiarioTarjetas
from FPago left join Diario on fpago.Cod_pago=Diario.cod_pago
where fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
--Segunda Froma de Pago
select cod_cen,'03' as vendedor,'TARJETAS' as descripcion,sum(diario.imppa2) as importe1 into tmpDiarioSegundaForma
from fpago left join Diario on Fpago.cod_pago=diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pfechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
--Comisiones tarjetas de pago
select cod_cen,'10' as vendedor, 'GASTOS (-)' as descripcion, sum(Diario.imppa2*(fPago.Descuento/100)) as importe2 into tmpDiarioGastosTarjetas
from Fpago left join Diario on FPago.cod_pago= Diario.cod_pa1
where fPago.cod_pago<>'99' and fecha>=@pFechaInicio and fecha<@pFechaFin and cod_cen in (select cod_cen from tmpCentros) and cod_caja in (select cod_caja from tmpCajasCentro) and Fpago.Descuento<>0
group by cod_cen
/*
--Venta neta por centro
declare cursortemporal cursor for select cod_cen from TmpCentros2
open cursortemporal
delete detallecaja_aux
fetch next from cursortemporal into @auxcod_cen
while @@fetch_status=0
Begin
select @importeVales=imp1 from tmpVales where cod_cen=@auxcod_Cen
select @importeEfectivo=importe2 from tmpDiarioEfectivo where cod_cen=@auxcod_Cen
select @importeTalones=importe2 from tmpDiarioTalones where cod_cen=@auxcod_cen
select @importeTarjetas1=importe3 from tmpDiarioTarjetas where cod_cen=@auxcod_cen
select @importeTarjetas2=importe1 from tmpDiarioSegundaForma where cod_cen=@auxcod_cen
select @importeGastos=importe2 from tmpDiarioGastosTarjetas where cod_cen=@auxcod_cen
select @importeVales=isnull(@importeVales,0)
select @importeEfectivo=isnull(@importeEfectivo,0)
select @importeTalones=isnull(@importeTalones,0)
select @importeTarjetas1=isnull(@importeTarjetas1,0)
select @importeTarjetas2=isnull(@importeTarjetas2,0)
select @importeGastos=isnull(@importeGastos,0)
print @auxcod_cen
print @importeVales
print @importeEfectivo
print @importeTalones
print @importeTarjetas1
print @importeTarjetas2
print @importeGastos
insert into detallecaja_aux (cod_cen,importe1)
values(@auxcod_cen, @importeVales+@importeEfectivo+@ImporteTalones+@ImporteTarjetas1+@importeTarjetas2-@importeGastos)
fetch next from cursortemporal into @auxcod_cen
select @importeVales=0
select @importeEfectivo=0
select @importeTalones=0
select @importeTarjetas1=0
select @importeTarjetas2=0
select @importeGastos=0
end
close cursortemporal
*/
select * from detallecaja_aux
GO
When I try to run it from visual basic it slow down the sql server.
What can I do?
View 2 Replies
View Related
May 14, 2008
When I launch Outlook, it takes forever for the program to finally open. With any inbound email, it stops processing whatever is underway at the time....and frequently there is a 2-3 second lag between keyboard input and what appears on the screen. SQLserver is usually consuming upwards of 1-gb of memory....help. Mike
View 1 Replies
View Related
Jul 23, 2005
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
View 2 Replies
View Related
Apr 18, 2008
Hi there,
I was wondering if someone can point out the error or the thing I shouldn't be doing in a stored procedure on SQL Server 2005. I want to switch from SQL Server 2000 to SQL Server 2005 which all seems to work just fine, but one stored procedure is causing me headache.
I could pin the problem down to this query:
DECLARE @Package_ID bigint
DECLARE @Email varchar(80)
DECLARE @Customer_ID bigint
DECLARE @Payment_Type tinyint
DECLARE @Payment_Status tinyint
DECLARE @Booking_Type tinyint
SELECT @Package_ID = NULL
SELECT @Email = NULL
SELECT @Customer_ID = NULL
SELECT @Payment_Type = NULL
SELECT @Payment_Status = NULL
SELECT @Booking_Type = NULL
CREATE TABLE #TempTable(
PACKAGE_ID bigint,
PRIMARY KEY (PACKAGE_ID))
INSERT INTO
#TempTable
SELECT
PACKAGE.PACKAGE_ID
FROM
PACKAGE (nolock) LEFT JOIN BOOKING ON PACKAGE.PACKAGE_ID = BOOKING.PACKAGE_ID
LEFT JOIN CUSTOMER (nolock) ON PACKAGE.CUSTOMER_ID = CUSTOMER.CUSTOMER_ID
LEFT JOIN ADDRESS_LINK (nolock) ON ADDRESS_LINK.SOURCE_TYPE = 1 AND ADDRESS_LINK.SOURCE_ID = CUSTOMER.CUSTOMER_ID
LEFT JOIN ADDRESS (nolock) ON ADDRESS_LINK.ADDRESS_ID = ADDRESS.ADDRESS_ID
WHERE
PACKAGE.PACKAGE_ID = ISNULL(@Package_ID,PACKAGE.PACKAGE_ID)
AND PACKAGE.CUSTOMER_ID = ISNULL(@Customer_ID,PACKAGE.CUSTOMER_ID)
AND PACKAGE.PAYMENT_TYPE = ISNULL(@Payment_Type,PACKAGE.PAYMENT_TYPE)
AND PACKAGE.PAYMENT_STATUS = ISNULL(@Payment_Status,PACKAGE.PAYMENT_STATUS)
AND BOOKING.BOOKING_TYPE = ISNULL(@Booking_Type,BOOKING.BOOKING_TYPE)
-- If this line below is included the request will take about 90 seconds whereas it takes 1 second if it is outcommented
--AND ADDRESS.EMAIl LIKE '%' + ISNULL(@Email, ADDRESS.EMAIL) + '%'
GROUP BY
PACKAGE.PACKAGE_ID
DROP TABLE #TempTable
The request is performing quite well on the SQL Server 2000 but on the SQL Server 2005 it takes much longer. I already installed the SP2 x64, I'm running the SQL Server 2005 on a x64 environment.
As I stated in the comment in the query it takes 90 seconds to finish with the line included, but if I exclude the line it takes 1 second.
I think there must be something wrong with the join's or something else which has maybe changed in SQL Server 2005. All the tables joined have a primary key.
Maybe you folks can spot the error / mistake / wrong type of doing things easily.
I would appreciate any help you can offer me to solve this problem.
On the web I saw that there is a Cumulative Update 4 for the SP2 which fixes the following:
942659 (http://support.microsoft.com/kb/942659/)
FIX: The query performance is slower when you run the query in SQL Server 2005 than when you run the query in SQL Server 2000
Anyhow I think the problem is something else, I haven't tried out the cumulative update yet, as I think it is something different, more general why this query takes ages to process.
Thanks again for any help
Best regards,
Pascal
View 9 Replies
View Related
May 13, 2002
My procedure compliles and runs. l 'm running it as 'exec Statement' it should prompt me for the start and end date but it does not. Where
have l gone wrong in my logic l've declared all the variables need. Please advice
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Statement]')
and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[Statement]
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Create Procedure Statement
As
Begin
declare @Startdate As datetime
declare @Enddate As datetime
declare @Customer_No As char(15)
declare @loanno As char(15)
declare @transaction_date As datetime
declare @transaction_type As char(3)
declare @reference As varchar(20)
declare @notes As varchar(255)
declare @transaction_amount As decimal (9,2)
declare @transaction_description As varchar(50)
declare @debit_amount As decimal (9,2)
declare @credit_amount As decimal (9,2)
declare @counter As int
declare @balance As decimal (9,2)
declare @user_changed As char(8)
declare c2 CURSOR FOR
SELECT loan_no
FROM loan
where customer_no = @Customer_No
ORDER BY loan_no
OPEN c2
FETCH NEXT FROM c2 INTO @loanno
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
declare c1 CURSOR FOR
SELECT transaction_record.loan_no,
transaction_record.transaction_date,
transaction_record.transaction_type,
transaction_record.reference_no,
transaction_record.notes,
transaction_record.transaction_amount,
transaction_type.[description]
FROM transaction_record
inner join transaction_type
on transaction_type.transaction_type = transaction_record.transaction_type
where loan_no = @loanno and transaction_Date between @startdate and @enddate and transaction_amount <> 0
ORDER BY transaction_date
OPEN c1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
If (@transaction_amount < 0)
Begin
set @credit_amount = @transaction_amount
set @debit_amount = 0
End
Else
Begin
set @debit_amount = @transaction_amount
set @credit_amount = 0
End
If (@counter = 0)
Begin
set @balance = @transaction_amount
End
Else
Begin
set @balance = @balance + @transaction_amount
End
insert into Statement (customer_no,loan_no,
transaction_date,transaction_type,transaction_desc ription,
reference, notes, debit_amount, credit_amount, balance,
user_changed, transaction_no)
Values (@Customer_No,
@loanno,
@transaction_date,
@transaction_type,
@transaction_description,
@reference,
@notes,
@debit_amount,
@credit_amount,
@balance,
@user_changed,
@counter)
set @counter = @counter+1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
End
CLOSE c1
DEALLOCATE c1
FETCH NEXT FROM c2 INTO @loanno
End
CLOSE c2
DEALLOCATE c2
END;
Go
View 1 Replies
View Related
May 24, 2004
This is my procedure and the error is incorrect syntax near '01'
DECLARE @returnDay int
--Looking at current date,
SELECT @returnDay = DatePart(day,GetDate())
--If is the 7th of the current moth then
If @returnDay = 24
EXEC master.dbo.xp_sendmail
@query = 'SELECT a.HospitalName,a.HospitalCode,c.ProductName,b.UnitsDiscarded,d.FateOfProducts,b. DateEntered,
b.DateCompleted,b.CompiledBy FROM test.dbo.Units b inner join Hospitals a ON (a.HospitalID = b.HospitalID)
inner join Products c ON (b.ProductID = c.ProductID)
inner join FateOfProducts d ON (d.FateID = b.FateID)
where b. DateEntered = DateAdd(month, -1, Convert(CHAR(8), GetDate(), 121) + '01') order by a.HospitalID',
@recipients=test@hotmail.com', @message='Submitting Results for the previous month',
@subject=' results for previous month', @attach_results = 'true', @separator = '/s'
SELECT @@ERROR As ErrorNumber
What am I missing here now, I am quite new to stored procedures
REgards
View 12 Replies
View Related
Jan 31, 2007
Hi. I've got a report with 4 different sections - the datasets coming from some tables that are populated via a stored procedure. I'd love it if the the first thing this report did was run that stored procedure and then the data would be available for the actual reporting piece. Is that possible? And if so, how do I make it work?
Thanks!
View 10 Replies
View Related
Nov 1, 2007
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
View 1 Replies
View Related
