A call to a stored procedure via the SQLCommand.ExecuteReader() is made. When the stored procedure goes into suspend state the ExecuteReader() call returns. The stored procedure is not yet finished, after the suspend state it goes into the runnable state and performs some calculations.
Is it possible to set a configuration that the ExecuteReader doesn't return when the stored procedure goes into suspend, or must an other method be used?
Hi. When SqlServer executes a procedure (any type: select, update, insert) after it´s executed can I get a default status for this executed procedure, like a return bool value from SqlServer as true for successfull and false for failed to execute?
I have a stored procedure in SQL 2005 that purges data, and may take a few minutes to run. I'd like to report back to the client with status messages as the sp executes, using PRINT statements or something similar. I imagine something similar to BACKUP DATABASE, where it reports on percentage complete as the backup is executing.
I can't seem to find any information on how to do this. All posts on this subject state that it's not possible; that PRINT data is returned after the procedure executes. However it would seem possible since BACKUP DATABASE, for example, does this.
Is there any way to send status type messages to the client as the sp is executing??
I am running a SQL Server procedure from ADO in visual C++, sometimes I get return -6 as return code from procedure.
From SQL Server documentation:
"SQL Server currently uses return values 0 through -14 to indicate the execution status of stored procedures. Values from -15 through -99 are reserved for future use."
I cannot find a description for the returns codes from SQL Server for error conditions (from -1 to -14), does anyone here knows where can I find this information?
Hi,Is it possible to somehow set a SQL Server DTS job to automaticallydisable itself, when it encounters a fail, so that future scheduledoccurrences don't happen until the problem has been fixed?I've hunted about for this on the web, but drawn a blank unfortunately!Many thanks if anyone can help at all.
Hi there, i have still some Problems with the SQL Server Express.
Sometimes (not always) it seems that the SQL Server Express "sleeps"
I write through my application every 60 seconds some values in a table , but somethimes it seems that the server is not reachable and i cannot wrote the data. but the phanomen are only happens for a record , the next time it works fine. (i check always for a open connection) if i cannot write the data , it seems that the connection is "away" and i reopen it. after that everything works
i have also try with the sql server auto close to false but with no success.
I gonna write some t-sql stored procedures,and need to log error information in a database table, but don't want that log entry to be a part of the logical transaction.
So basically i want to suspend the main transaction, perform SQL operations , commit or rollback those operations, and resume the main transaction.
I am wondering if there is any statement which I can write at the start of my script that causes some referencial integrity problem so that foriegn keys dont regulate my script and foriegn keys allow it to run.
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
a sql server database always contains two file.*.ldf *.mdf When *.ldf was deleted the database may suspend.we can repair such database through about 20 steps.
if you want repair your database .please contact me with email:cn9526@163.net or msn/email :paulyang8848@hotmail.com
you can also see our homepage http://www.haou.net/sqlother/
Hi guys , may I know is there any examples of store procedure/scripts for monitoring replication status and performance ? I just know about sp_replmonitorhelppublisher. Thx for the assistance.
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Recently we observed a problem. We are running stored procedure through our c# code. Three machines access the server and update or insert in the required tables in the server. If there is no data in the server, on installing first time our application usually our database is clean. then stored procedure works fine, it takes around 10 to 15 sec to execute. Next time if execute the time goes up to minutes like 15 mins. Next time it goes for hours around 4 hrs. Even to update 4 or 5 records it takes time. Initially we thought it was because of the size of the data and we tried to re tune on indexes, it did not solve. But now what we observe is even with less number of records in server also it wouldn't come of the execution for hours. Now are executing the just the SP in the SQL manager studio to see the time. That one also is executing for hours. when looked at the activity monitor the process goes to suspend state with wait type ASYNC_NETWORK_IO.
When we comment one of the query is working fine. Is this something to do with the query I am not sure. If that is the case it should not work every time.
The query makes any sence or is there any way to write it in better way
'UPDATE [server].[dbo].[DocumentMetadata] SET DocumentInfoID = b.DocumentInfoID, [Name] = b.[Name], MetadataType = b.MetadataType, [Value] = b.[Value], ValueType = b.ValueType FROM [server].[dbo].[DocumentMetadata] a WITH (UPDLOCK) INNER JOIN (SELECT c.DocumentInfoID, c.[Name], c.MetadataType, c.[Value], c.ValueType FROM MACHINENAME.[Client].[dbo].[DocumentMetadata] c INNER JOIN MACHINENAME.[Client].dbo.DocumentInfo DINF ON c.DocumentInfoID = DINF.DocumentInfoID INNER JOIN MACHINENAME.[Client].dbo.Path d on DINF.NativeFileID = d.PathID INNER JOIN MACHINENAME.[Client].dbo.ActiveDataSource ADS ON d.DataSourceID = ADS.DataSourceID WHERE ADS.ProjectID = ''' + @ProjID + ''') b ON a.DocumentInfoID = b.DocumentInfoID AND a.[Name] = b.[Name]'
'INSERT INTO [server].[dbo].[DocumentMetadata] (DocumentInfoID, [Name], MetadataType, [Value], ValueType) SELECT c.DocumentInfoID, c.[Name], c.MetadataType, c.[Value], c.ValueType FROM MACHINENAME.[Client].[dbo].[DocumentMetadata] c INNER JOIN MACHINENAME.[Client].dbo.DocumentInfo DINF ON c.DocumentInfoID = DINF.DocumentInfoID INNER JOIN MACHINENAME.[Client].dbo.Path d on DINF.NativeFileID = d.PathID INNER JOIN MYCLI.[Client].dbo.ActiveDataSource ADS ON d.DataSourceID = ADS.DataSourceID WHERE ADS.ProjectID = ''' + @ProjID + ''' AND Ltrim(rtrim(c.DocumentInfoID))+ ltrim(rtrim(c.[Name])) NOT IN (SELECT Ltrim(rtrim(DocumentInfoID))+ ltrim(rtrim([Name])) FROM [server].[dbo].[DocumentMetadata])'
We have been fighting it out for so many days. Can anybody help
We currently use a split-mirror backup strategy for our Sybase database, which has a "quiesce database" command to suspend all transactions. By quiescing the database before splitting the mirror, we suspend all transactions to ensure we get a stable backup of the environment. It works very well for us and I'm trying to understand how we could implement this with our SQL Server 2005 DB.
(I'm aware of SQL Server mirroring and that there are other ways of possibly backing up the DB. In this post however, I'm only interested in how I would make the split-mirror strategy work if I wanted to pursue it. I'm trying to avoid paying for software that uses the VDI as it's quite costly.)
Can someone help me with how I would accomplish a split-mirror backup strategy in SQL Server 2005 (without using a vendor's software that uses the VDI)? I have to imagine there's something similar to the "quiesce database" command in SQL Server...
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I want updated to few of person of any changes in database just by sending to their emails in every 2 hours as an example. I go through the example given but I do not know the step how to run stored procedures. The Information that I want to give to them is like as:
Date From : 23/02/2008 Date To: 24/02/2008 Number of user : 3
My draft table is like this
Sequence_No Submitted_Dt Name -------------------- ------------------- ------------------------
1 2/21/2008 4:16:45 PM John 2 2/22/2008 4:16:45 PM Dean 3 2/23/2008 4:16:45 PM Rick 4 2/24/2008 4:16:45 PM Van
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END. Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
IF (@i_WildCardFlag=0)BEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END PRINT @SQLString SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)' EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS GO SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric. REQUIREMENT: The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing for each user name in a temporary table (already done) total = result from execute totaling stored procedure Can you help with this Thanks
IF @@ERROR = 0 BEGIN -- Success. Commit the transaction. Commit Tran END ELSE Rollback Tran
return GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the "SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
