Stored Procedure Taking More Time Than Sql Query
Oct 6, 2005
Hi
I have one stored procedure and its taking 10 mins to execute. My stored procedure has 7 input parameters and one temp table( I am getting the data into temp table by using the input parameters) and also I used SET NOCOUNT ON. But if copy the whole code of the SP and execute that as regular sql statement in my query analyzer I am getting the result in 4 seconds. I am really puzzled with this.
What could be the reason why the SP is taking more than query,Unfortunately I can't post the code here.
Thanks.
View 1 Replies
ADVERTISEMENT
Aug 23, 2007
I have a CLR stored proceudure than runs under 2 or 3 mins when run in management studio. But when the report calls the same SP, it runs in around 30 mins and the CPU usage goes to 90 or 100% and the sqlserver service uses massive amount of memory. Previously the report worked fine, only after made a few data driven subscriptions and redeployed the reports with minor changes that it began to happen.
Please help--Iam stumped.
There are no infinite loops in the report. I checked.
View 9 Replies
View Related
Sep 13, 2001
Hi,
I am running this query and it is taking over 3 minutes.
"select * from table1 where CONVERT(varchar(10),dated,5) = '13-09-01' "
Table1 has a column called dated which is datetime datatype.
Any suggestions how can i optimize this query?I tried Non-clustered index on Dated column and time came down to less than 3 but still more than 2min.
TIA.
View 4 Replies
View Related
Nov 2, 2007
Dear All,
here i'm posting my query which is taking 3 minutes
please suggest me the best query
SELECT distinct INP.COLUMN001 REPORT_INPUT_ID, INP.COLUMN002 REPORT_ID, INP.COLUMN003 OPERATION_ID,
OPER.COLUMN004 OPERATION_CODE, OPER.COLUMN005 OPERATION_NAME, INP.COLUMN004 ITEM_ID,
CONVERT(NVARCHAR , INP.COLUMN005, 110) RECEIVED_DATE, INP.COLUMN006 LOT_NO, INP.COLUMN007 RECEIVED_QTY,
INP.COLUMN008 CONSUMED_QTY, (select CODE from view1 where item_id = INP.COLUMN004) my_val,
(select NAME from view1 where item_id = INP.COLUMN004) Item_Name, INP.COLUMN009 UOM_ID,
U.UOM_CODE, INP.COLUMN010 BASE_RECEIVED_QTY, INP.COLUMN011 BASE_CONSUMED_QTY,
case when INP.COLUMN012 ='1' then 'Progress' when INP.COLUMN012 ='2' then 'Closed' end OPERATION_STATUS,
case when INGDTL.COLUMN006 ='0' then 'Ingredient' when INGDTL.COLUMN006 ='1' then 'Intermediate' end INPUT_TYPE,
INP.COLUMNB01 COLUMNB01, INP.COLUMNB02 COLUMNB02, INP.COLUMNB03 COLUMNB03, INP.COLUMNB04 COLUMNB04,
INP.COLUMNB05 COLUMNB05, INP.COLUMNB06 COLUMNB06, INP.COLUMNB07 COLUMNB07, INP.COLUMNB08 COLUMNB08,
INP.COLUMNB09 COLUMNB09, INP.COLUMNB10 COLUMNB10, INP.COLUMND01 BRANCHID, INP.COLUMND02 COMPANYID, INP.COLUMND03 CREATEDBY,
INP.COLUMND04 CREATEDDATE, INP.COLUMND05 LASTUPDATEDBY, INP.COLUMND06 LASTUPDATEDDATE, INP.COLUMND07 ROWGUID,
INP.COLUMND08 UPDATEDSITE, INP.COLUMND09 LANGID, WC.COLUMN009 WIP_WAREHOUSE_ID,
(SELECT (sum(WIP.COLUMN011) - sum(wip.column010))
FROM TABLE066 WIP where wip.column008 = INP.column004 and WIP.COLUMN005 = '8cd741c7-1ac6-4839-88e7-df85518170f1' and wip.column006 = inp.column003 ) WIP_Qty ,
WIPM.Column005 WIP_ITEM_ID
FROM TABLE073 INP
left join view1 I on I.ITEM_ID = INP.COLUMN004
left join view2 U on U.UOM_ID = INP.COLUMN009
left join TABLE022 OPER ON OPER.COLUMN001 = INP.COLUMN003
left join TABLE066 WIP on WIP.column008 = INP.column004
left join TABLE015 WC on WC.COLUMN001 = OPER.COLUMN008
left JOIN TABLE040 INGDTL ON INGDTL.COLUMN002 = INP.COLUMN004 AND WIP.column008 = INGDTL.COLUMN002
left join TABLE065 WIPM on WIPM.column005 = INP.column004
where INP.COLUMN002 = '057f87aa-7884-43fa-8984-9b74c971da62' order by my_val
thank you very much
View 7 Replies
View Related
Aug 2, 1999
I have a stored procedure that normally takes about 5 hours to complete:
DELETE tblX WHERE PROC_DT < dateadd(day, -93 , getdate())
tblX has about 55 million records and has an index on PROC_DT.
I have this running as a scheduled task. Over the weekend, the task executed and it is still running 56+ hours later. Does anybody have any ideas as to where I should look for the problem? I am afraid to kill the process because of the rollback time.
View 4 Replies
View Related
May 16, 2007
I'm running a query (see below) on my development server and its taking around 45 seconds. It hosts 18 user databases ranging from 3 MB to 400 MB. The production server, which is very similar but with only 1 25 MB user database, runs the query in less than 1 second. Both servers have been running on VMWare for almost 1 year with no problems. However last week I applied SP 2 to the development server, and yesterday I applied Critical Update KB934458. The production server is still running SQL Server 2005 Standard SP 1. Other than that, both servers are identical and running Windows 2003 Server Standard SP 1. I'm not seeing this discrepancy with other queries running against user databases.
use MyDatabase
GO
select db_name(database_id) as 'Database', o.name as 'Table',
s.index_id, index_type_desc, alloc_unit_type_desc, index_level, i.name as 'Index Name',
avg_fragmentation_in_percent, fragment_count, avg_fragment_size_in_pages,
page_count, avg_page_space_used_in_percent, record_count,
ghost_record_count, min_record_size_in_bytes, avg_record_size_in_bytes, forwarded_record_count,
schema_id, create_date, modify_date from sys.dm_db_index_physical_stats (null, null, null, null, 'DETAILED') s
join sys.objects o on s.object_id = o.object_id
join sys.indexes i on i.object_id = s.object_id and i.index_id = s.index_id
where db_name(database_id) = 'MyDatabase'
order by avg_fragmentation_in_percent desc
--order by avg_fragment_size_in_pages desc
--order by page_count desc
--order by record_count desc
--order by avg_record_size_in_bytes desc
View 4 Replies
View Related
Apr 9, 2008
Hi there i have a sql server 7 database that i copied across to another server this time running windows 2003 and sql server 8. I have a routine that runs every night on each machine. on the old machine it take about 2 hours to do. on this new machine it is taking up to 5.5 hours to do the exact same job. the results are the same but the time delay could become an issue later on so i would like to nip it in the bud now.
Does anyone ahe any suggestions as to why the code would run so much slower on a newer and better spec machine.
I have copied everything across so there is no difference in tables or stored procedures. is there an optimisation tool i can run ??
has anyone got any ideas ?
View 6 Replies
View Related
May 2, 2006
I have a stored procedure that is taking too long to complete. I'ved narrowed the problem down to the following code. Is there any reason why this should take long to complete for about 40,000 records?
UPDATE Entries
SET EntryStatus = 1, reason = 'code entered more than once'
WHERE TimeSubmitted > @StartOfPeriod AND TimeSubmitted < @EndOfPeriod
AND TimeSubmitted <> @t and ShortCode = @ShortCode
AND verbatim = @v
View 4 Replies
View Related
Feb 21, 2002
HI,
I have an interesting situation. I have created a stored procedure which has a select union query and it accepts some parameters. When I execute this procedure it takes 8 minutes. When I copy the script in stored procedure and run it directly in Query Analyzer it takes 2 1/2 minutes?? Same numbers of rows are returned either way in the result set with about 13,000.
I cannot figure this out and it is almost the same thing except that in Query Analyzer I declare the parameters variables and its values?
Any feedback would be appreciated!
Thanks in advance...
View 2 Replies
View Related
Jun 25, 2007
The query below runs in sub second time if I don't call it as a stored procedure. I have looked at the execution plan for both the query and the query as a stored procedure and they are the same.
When I put the query into a stored procedure it takes over 2 minutes to run.
All feedback (even the ugly stuff) is more than welcome. I want to master this issue and forever put it behind me.
This is the sql when I just execute it outright:1 DECLARE
2 @WebUserID nvarchar(20)
3 ,@DocumentTypeID int
4 ,@RouteID nvarchar(10)
5 ,@CustomerID nvarchar(15)
6 ,@DocumentIDPrefix nvarchar(20)
7 ,@StartDate datetime
8 ,@EndDate datetime
9 ,@OversoldOnly bit
10 ,@DexCustomersOnly bit
11 ,@DeviationsOnly bit
12 ,@CashNoPaymentOnly bit
13 ,@SignatureName nvarchar(45)
14 ,@SortExpression varchar(200)
15 ,@StartRowIndex int
16 ,@MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 WITH OrderedDocumentHistory AS
32 (
33 SELECT
34 dh.DocumentHistoryID
35 ,dh.DocumentID
36 ,dh.DocumentTypeID
37 ,dh.DocumentTypeDesc
38 ,dh.RouteID
39 ,dh.RouteDesc
40 ,dh.CustomerID
41 ,dh.CustomerName
42 ,dh.DocDate
43 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
44 ,ddt.Description AS 'SignatureReason'
45 ,a.Amount
46 ,ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC) AS 'RowNumber'
47 FROM
48 DocumentHistory dh
49 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
50 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
51 INNER JOIN
52 (
53 SELECT
54 DocumentHistoryID
55 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
56 FROM
57 DocumentHistoryItems dhia
58 GROUP BY
59 dhia.DocumentHistoryID
60 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
61 LEFT OUTER JOIN
62 (
63 SELECT DISTINCT
64 dca.DocumentID
65 ,1 AS 'HasReceipt'
66 FROM
67 DocumentCollections dca
68 ) AS dc ON dh.DocumentID = dc.DocumentID
69 WHERE
70 dh.DocDate BETWEEN @StartDate AND @EndDate
71 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
72 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
73 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
74 AND dh.DocumentID LIKE @DocumentIDPrefix
75 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
76 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
77 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
78 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
79 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
80 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
81 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
82 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
83 OR @WebUserID IS NULL)
84 )
85
86 SELECT
87 DocumentHistoryID
88 ,DocumentID
89 ,DocumentTypeDesc
90 ,RouteID
91 ,RouteDesc
92 ,CustomerID
93 ,CustomerName
94 ,DocDate
95 ,Amount
96 ,HasReceipt
97 ,SignatureReason
98 FROM
99 OrderedDocumentHistory
100 WHERE
101 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows) Here is the sql for creating the stored procedure. 1 CREATE Procedure w_DocumentHistory_Select
2 (
3 @WebUserID nvarchar(20)
4 ,@DocumentTypeID int
5 ,@RouteID nvarchar(10)
6 ,@CustomerID nvarchar(15)
7 ,@DocumentIDPrefix nvarchar(20)
8 ,@StartDate datetime
9 ,@EndDate datetime
10 ,@OversoldOnly bit
11 ,@DexCustomersOnly bit
12 ,@DeviationsOnly bit
13 ,@CashNoPaymentOnly bit
14 ,@SignatureName nvarchar(45)
15 ,@SortExpression varchar(200)
16 ,@StartRowIndex int
17 ,@MaximumRows int
18 )
19 AS
20 SET NOCOUNT ON
21
22 IF LEN(@SortExpression) = 0 OR @SortExpression IS NULL
23 SET @SortExpression = 'Number DESC'
24
25 IF @StartRowIndex IS NULL
26 SET @StartRowIndex = 0
27
28 IF @MaximumRows IS NULL
29 SELECT
30 @MaximumRows = COUNT(dh.DocumentHistoryID)
31 FROM
32 DocumentHistory dh;
33
34 WITH OrderedDocumentHistory AS
35 (
36 SELECT
37 dh.DocumentHistoryID
38 ,dh.DocumentID
39 ,dh.DocumentTypeID
40 ,dh.DocumentTypeDesc
41 ,dh.RouteID
42 ,dh.RouteDesc
43 ,dh.CustomerID
44 ,dh.CustomerName
45 ,dh.DocDate
46 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
47 ,ddt.Description AS 'SignatureReason'
48 ,a.Amount
49 ,CASE
50 WHEN @SortExpression = 'Number DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID DESC))
51 WHEN @SortExpression = 'Number ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID ASC))
52 WHEN @SortExpression = 'CustomerName DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName DESC))
53 WHEN @SortExpression = 'CustomerName ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName ASC))
54 WHEN @SortExpression = 'CompletedDate DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC))
55 WHEN @SortExpression = 'CompletedDate ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate ASC))
56 WHEN @SortExpression = 'RouteDescription DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc DESC))
57 WHEN @SortExpression = 'RouteDescription ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc ASC))
58 END AS 'RowNumber'
59 FROM
60 DocumentHistory dh
61 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
62 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
63 INNER JOIN
64 (
65 SELECT
66 DocumentHistoryID
67 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
68 FROM
69 DocumentHistoryItems dhia
70 GROUP BY
71 dhia.DocumentHistoryID
72 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
73 LEFT OUTER JOIN
74 (
75 SELECT DISTINCT
76 dca.DocumentID
77 ,1 AS 'HasReceipt'
78 FROM
79 DocumentCollections dca
80 ) AS dc ON dh.DocumentID = dc.DocumentID
81 WHERE
82 dh.DocDate BETWEEN @StartDate AND @EndDate
83 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
84 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
85 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
86 AND dh.DocumentID LIKE @DocumentIDPrefix
87 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
88 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
89 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL((SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
90 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
91 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
92 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
93 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
94 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
95 OR @WebUserID IS NULL)
96 )
97 SELECT
98 DocumentHistoryID
99 ,DocumentID
100 ,DocumentTypeDesc
101 ,RouteID
102 ,RouteDesc
103 ,CustomerID
104 ,CustomerName
105 ,DocDate
106 ,Amount
107 ,HasReceipt
108 ,SignatureReason
109 FROM
110 OrderedDocumentHistory
111 WHERE
112 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows)
Here is the code for calling the stored procedure:1 DECLARE @RC int
2 DECLARE @WebUserID nvarchar(20)
3 DECLARE @DocumentTypeID int
4 DECLARE @RouteID nvarchar(10)
5 DECLARE @CustomerID nvarchar(15)
6 DECLARE @DocumentIDPrefix nvarchar(20)
7 DECLARE @StartDate datetime
8 DECLARE @EndDate datetime
9 DECLARE @OversoldOnly bit
10 DECLARE @DexCustomersOnly bit
11 DECLARE @DeviationsOnly bit
12 DECLARE @CashNoPaymentOnly bit
13 DECLARE @SignatureName nvarchar(45)
14 DECLARE @SortExpression varchar(200)
15 DECLARE @StartRowIndex int
16 DECLARE @MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 EXECUTE @RC = [Odom].[dbo].[w_DocumentHistory_Select]
32 @WebUserID
33 ,@DocumentTypeID
34 ,@RouteID
35 ,@CustomerID
36 ,@DocumentIDPrefix
37 ,@StartDate
38 ,@EndDate
39 ,@OversoldOnly
40 ,@DexCustomersOnly
41 ,@DeviationsOnly
42 ,@CashNoPaymentOnly
43 ,@SignatureName
44 ,@SortExpression
45 ,@StartRowIndex
46 ,@MaximumRows
View 3 Replies
View Related
Jun 11, 2015
Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies
View Related
Jun 11, 2002
I have a VB application which uses SQL server as the database and uses Crystal reports for reporting.We are using a stored procedure to create a report and we pass ID from the vb side to run the stored procedure.
In boston the report shows up in 4 sec.But in california it takes 7 min.
We have a very good network(T3).Why it is taking more time in california ?.
Any ideas ?
View 1 Replies
View Related
Oct 12, 2007
Dear Experts,
i've one table named table11. in this perticular table, i've 30 columns and 40,000 rows of data.
this table is taking 35 sec for select * from table11.
defnetly it will take more time if i used this in some places like procedures and functions or views like that.
where is the problem? generally it takes that much of time or is there any problem?
guidence please.....
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 4 Replies
View Related
Jun 3, 2002
I have a stored procedure when I run it manually it takes 23 seconds.
I Scheduled a job to run the same stored procedure.It is taking 33 minutes.
Any ideas why it is taking so much time ?
View 3 Replies
View Related
Dec 6, 1999
Hi guys.
I am having trouble in time issues while backuping my database.
My database size is around 50GB. It is taking around 5hrs.
Is there any way to reduce the 5 hr backup time to 3 or less.
Thanks in advance
MAK
View 1 Replies
View Related
May 23, 2007
Hello All,
I have SQL Server 2005 installed on my machine and I am firing following query to insert 1500 records into a simple table having just on column.
Declare @i int
Set @i=0
While (@i<1500)
Begin
Insert into test2 values (@i)
Set @i=@i+1
End
Here goes the table definition,
CREATE TABLE [dbo].[test2](
[int] NULL
) ON [PRIMARY]
Now the problem with this is that on one of my server this query is taking just 500ms to run while on my production and other test server this query is taking more than 25 seconds.
Same is the problem with updates. I have checked the configurations of both the servers and found them to be the same. Also there are no indexes defined on either of the tables. I was wondering what can be the possible reason for this to happen. If any of u people has any pointers regarding this, will be really useful
Thanks in advance,
Mitesh
View 6 Replies
View Related
Sep 4, 2007
Hi:
I have a query which returns approximately 50000 records, I am using a linked server to connect to two databases and retrieve data. For some reason it is taking a liitle more than hour to execute the query, but on MS Sql Server query window it comes after few minutes but the query runs for a long time.
How can expediate my query execution process.
Environment details
Database: MS Sql Server 64bit 2005
MS Sql jar file: sqljdbc_1.2.jar
OS: Windows both server and client.
Connect String in java code:
jdbcqlserver://sample_server:1433;databaseName=sample_db;user=admin_user;password=admin_pwd
and use PreparedStatement and ResultSet.
Regards
Arup
View 2 Replies
View Related
Apr 14, 2008
Hi,
I have a DTS in SQL Server 2000, Where I am importing some data from a remote server (SQL 2000) to local server (SQL 2000).And this is working fine. it is taking max of 1 min to execute the package.
Now I have created the same DTS in sql server 2005 (SSIS) where the source server is sql server 2000 and the destination server is 2005.and I have created the ssis in that server. The same logic which i have created in sql 2000. But here it is taking almost 10 min to execute the package.
Where as the same in sql server 2000 taking max of 1 min. Why this happening.. Is there any configuration to execute the SSIS package.?
View 12 Replies
View Related
Dec 14, 2006
I have a SSIS package where a small table of 270 rows are fuzzy looked up with a table in another sql server and inserts the records to a temporary table. This takes more than 3 hours in debug mode or so and never goes beyond this step.I have used a OLE DB destination to insert to temporary table and temporary table doesn't get a value.
View 2 Replies
View Related
May 31, 2007
i have sql 2000 db of about 120 GB. its taking about 10 -12 hours to restore on the same disk as new database.
server configuration is good.
when i try to restore another db of about 10 GB size, its restoring in about 5 minutes.
View 2 Replies
View Related
Oct 13, 2003
Sometime is necessary to stop MSSQLSeverOLAPServieces to do a full backup in my OLAP Server disks. After backup had finished and I tried to star MSSQLSeverOLAPServieces but it takes almost 30 minutes to the services starts.
What can it be causing that?
Paulo
View 5 Replies
View Related
Mar 7, 2002
Hi,
I have a table with 48 million rows,when i executed following update query it is taking 10 HOURS in SQL SERVER 2000 with SP1.
Where as when i executed same query in SQL SERVER7.0 with same table then it is taking 13 MINUTES. Comming to Machine...SQL 2000 Server has more processors and greater memory than SQL 7.0 m/c.
It looks strange but this is true.Does any one faced such problem..is there any bug in SQL 2000?????
Here is Query::
update cus_pay_jan_dist set univ_regdate = b.dayid
from cus_pay_jan_dist a with (nolock), tm_dayids b with (nolock)
where a.univ_regdate = b.dayidnum and a.univ_regdate like '2001%'
Thanks
Ananth
View 6 Replies
View Related
Sep 19, 2007
Hi All,
Scenario:
There are two applications running on different server say ServerA and ServerB. Both applications are using same database server SQL Server 2005 say ServerB. Called the application as ApplicationA and ApplicationB with respect to Server names
It means for ServerA the database is remote and for ServerB, database is local.
Both the applications are Java application and using datasource to connect to the database. The driver used are SQL Server 2000 driver (which includes 3 jars). This can be a question that why 2000 driver is used for 2005. The reason is, application on ServerA is getting error while using SQL Server 2005 as Driver not proper.
Problem Area:
When ApplicationB (local to database) is doing some DB operations (which includes select and then batch insert), ApplicationA (remote) is trying to insert a record which is taking too long time (around 40 sec.). This is causing timed out in ApplicationA.
ApplicationA is inserting the data into the same table from where ApplicationB is selecting the data.
Any help????
Cheers
Nitin
View 2 Replies
View Related
Dec 11, 2007
Does the validation time of DTSX package depend on the amount of data?
I have a data transfer task which contains a oledb source data from a SQL Server 2005 view. Then the data go through 3 Lookup transfromations before going into another view, also on SQL Server 2005 but a different database.
The purpose of this package is to load fact data, so it has to deal with few million of rows. Before setting DelayValidation to true, it takes few minutes just to open the package in BI Studio. Now with DelayValidation set to false, I can open the package without any problem. But it takes more than 5 minutes during Validation, Prepare for Execution and Pre-execution Phase. During the time the memory usage and cpu time on SQL Server goes up significantly. The CPU doesn't hit 100% though. My client machine doesn't have any significant activity.
I have similar packages ( Oledb view -> 3 or 4 lookup Transformations -> Oledb Table) but dealing with dimension data. With DelayValidaion set to False, those packages can be opened in BI Studio within few seconds. They also take only few seconds during those 3 phases before starting actual execution phase.
So I have an impression that the validation time depends on the amount of data in the database. Shouldn't it just depends on the metadata?
View 5 Replies
View Related
Mar 27, 2008
I have an update statment in my SSIS that use to take 10 minutes in SQL 2000 dts and now its take 1 hour 15 minutes in SQL 2005.
this is my sql update statment -
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null
It is using ole db connection. About 36,000 records that it is updating.
I have read ole db can be slow and to use staging table. Does that mean on all updates like this I have to use a staging table and then insert. I didn't use to have to do this in SQL 2000. Has it changed. Are there any other options?
any input greatly appreciated.
View 7 Replies
View Related
Mar 30, 2007
Hello,
I'm trying to figure out why my transaction log backup is taking up to an hour to complete. I started off with a full recovery model with a Full database back up every Sunday, differential backups every Tuesday/Thursday and log backups every 5 minutes. I would have thought that the log file backups would execute much quicker because I'm backing them up more often.
Here is my backup statement, I'm hoping I've got a wrong option that you can point out to me:
BACKUP LOG [xxxx] TO [LogFilexxxxBackups] WITH NOINIT , NOUNLOAD , NAME = N'xxxx log backup', SKIP , STATS = 10, NOFORMAT
View 1 Replies
View Related
Mar 9, 2008
hi,
I'm using a OLE DB COMMAND component to perform an update (SQL statement) but the procces takes about 9 hours, so I changed it to a stored procedure but it was the same, I need to update about a a million of rows and the package is very simple.
How can I improve the time, Can I use another component or startegy?
thanks
View 3 Replies
View Related
Apr 30, 2008
The process is as follow,
The destination table is truncated and indexes are dropped before loading and after data being inserted we re-create the indexes.
Before this, a view extracts data from more than 22 tables from a staging database and tries to insert this data in the destination table.
it used to take 12-15 mins, but since yesterday loading one particular table never completes. While loading, the database is set to Simple recovery. There are no blocking. It's part of a daily batch thats loads 6 GB of data everyday. But while loading on particular table it's just keep running for hours. I tried rebuilding the indexes and re-starting the SQL Server but of no use.
Any help is much appreciated as this production batch job.
Thanks in advance.
View 4 Replies
View Related
Sep 1, 2006
Good afternoon everyone, I have written a view that pulls customer demographic infomration as well as pulling data from multiple scalar-valued functions. I am using this view to pull and send data from one database to another in the same SQL server. The problem that I am having is that I am running this import as a scheduled job in windows. The job is taking almost 24 hours to complete this task. The total number of records that are being pulled is around 21,000+. I have tried removing the functions from the view and it only takes the view 20 seconds to pull the demographic information from the same 21,000+ records but when I add the function calls this is where the time to complete goes through the roof. Has anyone encountered this before if so what would you suggest doing? Any help would be appreciated. Here is the syntax for my view: SELECT TOP 100 PERCENT CUS_EMAIL AS Email, CUS_CUSTNUM AS MemberID, CUS_PREFIX AS Prefix, CUS_FNAME AS FirstName,
CUS_LNAME AS LastName, CUS_SUFFIX AS Suffix, CUS_TITLE AS Title, CUS_STATE AS State, CUS_COUNTRY AS Country, CUS_ZIP AS ZipCode,
CUS_SEX AS Gender, CAST(CUS_DEMCODEA AS nvarchar(20)) + ',' + CAST(CUS_DEMCODEB AS nvarchar(20))
+ ',' + CAST(CUS_DEMCODEC AS nvarchar(20)) + ',' + CAST(CUS_DEMCODED AS nvarchar(20)) AS DemoCodes,
dbo.GetSubScribedDateMLA(CUS_CUSTNUM, CUS_EMAIL) AS MLASubscribedDate, dbo.GetSubScribedDateMLP(CUS_CUSTNUM, CUS_EMAIL)
AS MLPSubscribedDate, dbo.GetSubScribedDateLDC(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubscribedDate, dbo.GetMLAExpiration(CUS_CUSTNUM,
CUS_EMAIL) AS MLASubExpireDate, dbo.GetMLPExpiration(CUS_CUSTNUM, CUS_EMAIL) AS MLPSubExpireDate,
dbo.GetLDCExpiration(CUS_CUSTNUM, CUS_EMAIL) AS LDCSubExpireDate, dbo.IsProspect(CUS_CUSTNUM, CUS_EMAIL) AS AGMProspect,
dbo.IsCurrentCustomer(CUS_CUSTNUM, CUS_EMAIL) AS AGMCurrentCustomer, dbo.IsMLAMember(CUS_CUSTNUM, CUS_EMAIL) AS MLAMember,
dbo.IsMLPMember(CUS_CUSTNUM, CUS_EMAIL) AS MLPMember, dbo.IsLDCMember(CUS_CUSTNUM, CUS_EMAIL) AS LDCMember,
dbo.CalculateTotalRevenue(CUS_CUSTNUM, CUS_EMAIL) AS AGMTotalRevenue, dbo.GetPubCodes(CUS_CUSTNUM, CUS_EMAIL)
AS ProductsPurchased, dbo.GetEmailType(CUS_CUSTNUM, CUS_EMAIL, CUS_RENT_EMAIL) AS EmailType, CUS_COMPANY AS Company,
CUS_CITY AS City
FROM dbo.CUS
WHERE (CUS_EMAIL IS NOT NULL) AND (CUS_EMAIL <> '') AND (CUS_EMAIL_VALID = 'Y') AND (CUS_EMAIL LIKE '%@%.%') AND (CUS_RENT_EMAIL = 'Y' OR
CUS_RENT_EMAIL = 'R' OR
CUS_RENT_EMAIL = 'I') AND (CHARINDEX(' ', CUS_EMAIL) = 0) AND (CUS_EMAIL NOT LIKE '@%')
Thanks in advance Michael Reyeros
View 9 Replies
View Related
Apr 18, 2002
I have a backup mainentance plan that does a full backup daily at 03:00am and then 2 minute transaction log backups throughout the day to a raided hard drive (It is set to overwrite after 2 weeks), When i go into enterprise manager and select the database to restore it just seems to take too long to read the backup history in. Can this time be reduced as i need to be able to restore the database A.S.A.P but still need a point in time restore to within 2 minutes of going down??
Thanks
View 1 Replies
View Related
Apr 19, 2006
I have SSIS Projects taking a long time to open with packages with a large number of data flows. Is there a way to turn off validation of metadata when a package opens? Turn off validation during execution on SSIS Service (after previously validated in dev)? Or be able to control when validation takes place in general?
In my one package (1 of 5) I have 43 data flows (with a single source to target mapping) in 4 sequence containers, and it takes approximately 2-3 seconds per source to target mapping and sequence container to validate which will translate to 1 ½ to 2 ½ minutes to open. When the project with all 100+ tables for the data warehouse goes through validation, I can make coffee in the time it takes to open the project. I have to delete *.suo file (or verify all packages are closed in the designer and save the project file), and when I open the project, I have to jump immediately to SSISÃ Work Offline to set it to not validate the metadata to be able to work in a timely fashion. DelayValidation=TRUE does not help much.
Running in debug mode, has an effect of causing packages that were not open and validated to go through validation though I am not running those packages. Validate once during design and run forever.
Even if I re-open a package that I just closed from designer and had gone through validation, it will go through the validation process again.
It would be great if there could be an on-demand option off the menu bar to allow one to control when validation can take place for a project, or a more granular validation option for a specific data flow or container.
View 7 Replies
View Related
Jan 14, 2006
Hi,
Why is taking so long to open/create/render the reports for the first time? Is there any configuration to change this? I don€™t think this behavior is related to Report Execution or cache! I think there is something else going on! Thanks.
View 12 Replies
View Related
