I need to write a sp to fill a date field, if another field in another table is true. need the date to reflect todays date(the date the field was marked true). I know this is an easy one but I am over thinking it. please help.
View 2 RepliesThe following is NOT filling the dataset or rather, 0 rows returned.....The sp.....CREATE PROCEDURE dbo.Comms
@email NVARCHAR ,@num INT OUTPUT ,@userEmail NVARCHAR OUTPUT ASBEGIN DECLARE @errCode INT
SELECT fldNum, fldUserEmailFROM tblCommsWHERE fldUserEmail = @email SET @errCode = 0 RETURN @errCode
HANDLE_APPERR:
SET @errCode = 1 RETURN @errCodeENDGOAnd the code to connect to the sp - some parameters have been removed for easier read.....
Dim errCode As Integer
Dim conn = dbconn.GetConnection()
Dim sqlAdpt As New SqlDataAdapter
Dim DS As New DataSet
Dim command As SqlCommand = New SqlCommand("Comms", conn)
command.Parameters.Add("@email", Trim(sEmail))
command.CommandType = CommandType.StoredProcedure
command.Connection = conn
sqlAdpt.SelectCommand = command
Dim pNum As SqlParameter = command.Parameters.Add("@num", SqlDbType.Int)
pNum.Direction = ParameterDirection.Output
Dim pUserEmail As SqlParameter = command.Parameters.Add("@userEmail", SqlDbType.NVarChar)
pUserEmail.Size = 256
pUserEmail.Direction = ParameterDirection.Output
sqlAdpt.Fill(DS)
Return DS
Like I said, a lot of parameters have been removed for easier read.And it is not filling the dataset or rather I get a count of 1 back and that's not right.I am binding the DS to a datagrid this way....
Dim DScomm As New DataSet
DScomm = getPts.getBabComm(sEmail)
dgBabComm.DataSource = DScomm.Tables(0)
And tried to count the rows DScomm.Tables(0).Rows.Count and it = 0Suggestions?Thanks all,Zath
I have a table with information about a mobile account in one table, a table for mobile plans, and a table for planfeatures. Each mobile account is associated with a planid, and may be associated with any combination of the features associated with that plan. The plan features are stored in a bridgetable which contains 'invoicedate' (date stamped on the invoice in question), 'subaccountnumber' (the cell phone number), 'planid', and 'featureid'. I've tested the UpdateMobileFeature sp directly from the SQL Profiler--it works fine on it's own. I use a stored procedure to fill the mobile table (called from aspx page), and since I use three of the four columns written above for both the mobilesub and the mobilefeature tables, I tried just adding the parameter which holds the featureid's to the sp to update the mobilesub table. Then I call the UpdateMobileFeature sp from the updatemobile sp. (The code in mobilesub that is not calling UpdateMobileDetail works well). All seems to work fine--nothing crashes or anything, but nothing is being added to the mobilefeature table. Here is the code:CREATE procedure usp_updatemobile( @InvoiceDate smalldatetime, @SubaccountNumber varchar(50), @PlanId int, @FeatureList varchar(500) --added for UpdateMobileFeatures. In the form of a comma-seperated list, to imitate an array. --***irrelevant parameters removed***--)
as
exec dbo.UpdateMobileFeature '@InvoiceDate','@SubaccountNumber','@PlanId','@FeatureList' --the apparently nonfunctional call
if exists ( //select for the mobile row in question ) Begin //update row
End
Else Begin //insert new row End
GOCREATE PROC dbo.UpdateMobileFeatures( @InvoiceDate smalldatetime, @SubaccountNumber varchar(50), @PlanID int, @FeatureList varchar(500))ASBEGIN SET NOCOUNT ON
CREATE TABLE #TempList ( InvoiceDate smalldatetime, SubaccountNumber varchar(50), PlanID int, FeatureID int )
DECLARE @FeatureID varchar(10), @Pos int SET @FeatureList = LTRIM(RTRIM(@FeatureList))+ ',' SET @Pos = CHARINDEX(',', @FeatureList, 1)
IF REPLACE(@FeatureList, ',', '') <> '' BEGIN WHILE @Pos > 0 BEGIN SET @FeatureID = LTRIM(RTRIM(LEFT(@FeatureList, @Pos - 1))) IF @FeatureID <> '' BEGIN INSERT INTO #TempList (InvoiceDate, SubaccountNumber, PlanID, FeatureID) VALUES (@InvoiceDate, @SubaccountNumber, @PlanID, CAST(@FeatureID AS int)) --Use Appropriate conversion END SET @FeatureList = RIGHT(@FeatureList, LEN(@FeatureList) - @Pos) SET @Pos = CHARINDEX(',', @FeatureList, 1)
END END
--SELECT o.FeatureID, CustomerID, EmployeeID, FeatureDate --FROM dbo.Features AS o -- JOIN -- #TempList t -- ON o.FeatureID = t.FeatureID
Insert Into MobileFeatures Select InvoiceDate, SubaccountNumber, PlanID, FeatureID From #TempList ENDGOHere is the method I used to call the first sp: (also with irrelevant stuff removed)public void saveCurrentMobile() {
calculateTotals();
InvoiceDataSet dataset = InvoiceDataSet.GetInstance();
SqlConnection conn = (SqlConnection)Session["connection"];
SqlCommand cmdUpdateMobile;
cmdUpdateMobile = new SqlCommand("usp_updatemobile", conn); cmdUpdateMobile.CommandType = CommandType.StoredProcedure;
SqlParameter invoicedate = cmdUpdateMobile.Parameters.Add("@InvoiceDate", SqlDbType.SmallDateTime); invoicedate.Value = DateTime.Parse(Request.Params["InvoiceDate"].ToString());
SqlParameter cellnumber = cmdUpdateMobile.Parameters.Add("@SubaccountNumber", SqlDbType.VarChar, 50); cellnumber.Value = txtCellNumber.Text.Trim();
SqlParameter plan = cmdUpdateMobile.Parameters.Add("@PlanId", SqlDbType.Int); plan.Value = planid;
SqlParameter featurelist = cmdUpdateMobile.Parameters.Add("@FeatureList", SqlDbType.VarChar, 500); featurelist.Value = planform.FeatureList;
//Response.Write(isthirdparty.ToString()); Response.Write(thirdpartycompany);
SqlParameter cycle = cmdUpdateMobile.Parameters.Add("@Cycle", SqlDbType.Int); cycle.Value = Convert.ToInt32(Request.Params["Cycle"]);
int returnvalue = runStoredProcedure(cmdUpdateMobile); //the sp is called within this method.
if (returnvalue != 0) { dataset.fillMobileTable(); Response.Write("Mobile Subaccount Saved!"); } }
i explain
what i mean is if i have stored procedure with 7 conditions
for evry day in the week one condition
like this i have 7 code blocks for Sunday,Monday , .....Saturday
Code Block
CREATE PROC YourProc
@StartDate datetime = NULL,
@EndDate datetime = NULL
AS
SET @StartDate = COALESCE(@StartDate,DATEADD(d,DATEDIFF(d,0,GETDATE()),0))--defaulting to todays date if not supplied
SET @EndDate=COALESCE(@EndDate,DATEADD(m,1,@StartDate))--defaults to 1 month from today
WHILE @StartDate <= @EndDate
BEGIN
SELECT CASE
WHEN DATENAME( dw,@StartDate)='Sunday' AND
empid IN (SELECT empid FROM v_un WHERE (shift =51 )
THEN 1
WHEN DATENAME( dw,@StartDate)='Monday' AND
empid IN (SELECT empid FROM v_un WHERE (shift =11 )
THEN 2
............
WHEN DATENAME( dw,@StartDate)='Saturday' AND
...
THEN ..
END
SET @StartDate=DATEADD(d,1,@StartDate)
END
GO
like this until the last day of the month
TNX
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies View RelatedI am trying to run the query :
SELECT Payment_Date
FROM dbo.tbl_PaymentDt
WHERE Payment_Date BETWEEN '08/06/2002' AND
'08/07/2002'
In the table, Payment_Date is stored as default value getdate(). The above query results in the records for '08/06/2002' only, even if the records are present for '08/07/2002'. This problem is probably due to the format in which date is stored. Here date is stored along with time.
Pl tell me the work around so that when dates are compared, time is ignored.
Pl tell me a function available in SQl which only give date minus time from a field stored as GetDate().
Thanks. Waiting for ur reply.
Hi everyone,
the last years I solved tons of "problems" with plain SQL, but
I think this one will require some programming...
a stored procedure, a vb, I don't know ...
Here is the point:
I'm trying to build a simple OLAP-cube out of personal data.
I get table_person with number, name, birthdate, and so on.
I get table_costcenter with costcenternumber and description and
I get a table_person_costcenter with the following structure:
person-number, costcenter, FROM-Date (and some other data, e.g.
workinghours per week(this and headcount are the measures in the cube))
so...
Person 1 is on costcenter CC01 FROM-Date: 01.01.1998
person changed next year
1 CC02 FROM-Date: 01.01.1999
...
2 CC02 01.05.1999
2 CC03 01.01.2000
and so on....
I can think of loops reading the hole table (roundabout 2000 records),
than the one, two or more records with the person-number 1 and so on
and fill in the missing Dates (every first of a month) BETWEEN the
first FROM-Date to the next FROM-Date and so on till the last record with personnumber X which will lead to CURRENT DATE....
but I never programmed in MS SQL. :-(
So every code examples are heartly wellcome...
many thanks in advance
Michael
PS:
The result-table should look like this
person costcenter date
1 CC01 01.01.1998 january
1 CC01 01.02.1998 feb
1 CC01 01.03.1998 march
..
1 CC02 01.01.1999
1 CC02 01.02.1998
.. when no other connections "1" to costcenter ...
1 CC02 01.02.2004 (current month)
Hello Everyone,
I have the following stored procedure:
set ANSI_NULLS OFF
set QUOTED_IDENTIFIER OFF
GO
ALTER PROCEDURE [dbo].[usp_MLSReport_LRR]
@UserId int,
@ReportGroupId int = null,
@BranchTranType varchar(50) = null,
@BranchDivision varchar(50) = null,
@BranchRegion varchar(50) = null,
@BranchNbr int = null,
@BranchSatId varchar(1) = null,
@BeginDate datetime,
@EndDate datetime
AS
-- DECLARE @UserId int,
-- @ReportGroupId int,
-- @BranchTranType varchar(50),
-- @BranchDivision varchar(50),
-- @BranchRegion varchar(50),
-- @BranchNbr int,
-- @BranchSatId varchar(1),
-- @BeginDate datetime,
-- @EndDate datetime
--
-- SET @UserId = 4602
-- --SET @ReportGroupId = 46
-- SET @BranchDivision = 'DENVER DIRECT'
-- SET @BeginDate = '4/27/05'
-- SET @EndDate = '9/30/05'
SET NOCOUNT ON
DECLARE @UseCTD int
SET @UseCTD = CASE WHEN @BranchTranType IS NULL
AND @BranchDivision IS NULL
AND @BranchRegion IS NULL
AND @BranchNbr IS NULL
AND @BranchSatId IS NULL THEN 1 ELSE 0 END
SELECT DISTINCT
L.ProviderId,
L.OriginalProviderId,
S.SourceCode,
SG.SourceGroupCode,
SGDescription=SG.Description,
RG.ReportGroupId ,
ReportGroupDesc=RG.Description ,
L.VendorId,
VEN.VendorName,
B2.BranchTranType,
B2.BranchDivision,
B2.BranchRegion,
B2.BranchName,
L.BranchNbr,
L.BranchSatId ,
Branch=CONVERT(varchar, L.BranchNbr) + L.BranchSatId,
LoNbr = ISNULL(L.LONbr, 9999),
LoName = ISNULL(LO.LOName, ' - NOT ASSIGNED -') ,
LoEmploymentStatus = LO.EmploymentStatus,
LeadCount = 1,
Completed = CASE WHEN L.RecCompleted = 'C' THEN 1 ELSE 0 END,
InCompleted = CASE WHEN L.RecCompleted = 'I' THEN 1 ELSE 0 END ,
NoContact = CASE WHEN LD.Disposition = 16 THEN 1 ELSE 0 END,
Contacted = CASE WHEN LD.Disposition <> 16 THEN 1 ELSE 0 END,
Pending = CASE WHEN LD.Disposition IS NULL THEN 1 ELSE 0 END,
NoSale = CASE WHEN LD.Disposition <> 1 THEN 1 ELSE 0 END,
Apps1003 = CASE WHEN LD.Disposition = 1 THEN 1 ELSE 0 END ,
AppraisalsOrdered = CASE WHEN ISNULL(T3._@8034, 0) = 0 THEN 0 ELSE 1 END,
ClosedApps= CASE WHEN (@UseCTD = 1 AND SMT2._H0770 IS NOT NULL) OR SMT._H0770 IS NOT NULL THEN 1 ELSE 0 END,
LoanVolume = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(T1._@2026, 0) ELSE ISNULL(T1._@2026, 0) END,
OrigLoanBalance = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(SMT2._H0360, 0) ELSE ISNULL(SMT._H0360, 0) END,
Revenue = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(SMT2.calc_TotalIncomeDollars, 0) ELSE ISNULL(SMT.calc_TotalIncomeDollars, 0) END,
MarketingCost = CASE WHEN L.VendorId IN (59, 60) THEN 0 ELSE ISNULL(S.Cost, 0) END,
CAM.LeadTypeId,
SMT.calc_TotalIncomeDollars,
SP.SubjectAddrState,
SP.SubjectSCF,
S.LeadFormLabel
FROM MLS..tbl_MLS_Leads L (NOLOCK)
INNER JOIN MLS..tbl_MLS_LeadDispositions LD (NOLOCK) ON (LD.ProviderId = L.ProviderId)
INNER JOIN MLS..tbl_MLS_Branches B1 (NOLOCK) ON (B1.BranchNbr = L.BranchNbr AND B1.BranchSatId = L.BranchSatId)
INNER JOIN MLS..vw_MLS_AUCodeSecurity AU (NOLOCK) ON (B1.AUCode = AU.AUCode AND AU.UserId = @UserId)
INNER JOIN CHEC..SMT_Branches B2 (NOLOCK) ON (B1.BranchNbr = B2.BranchNbr)
INNER JOIN MLS..tbl_MLS_SubjectProperties SP (NOLOCK) ON (SP.ProviderId = L.ProviderId)
LEFT JOIN CHEC..TMRPT100 T1 (NOLOCK) ON (T1._@LOAN# = LD.TMOLoanNbr)
LEFT JOIN CHEC..TMRPT300 T3 ON (T1._@LOAN# = T3.R3LOAN)
LEFT JOIN CHEC..SMT3 SMT (NOLOCK) ON (SMT._H0010 = LD.TMOLoanNbr)
LEFT JOIN CHEC..SMT3 SMT2 (NOLOCK) ON (SMT2._H0010 = LD.CTDLoanNbr)
LEFT JOIN CHEC..SRVDSR SRV (NOLOCK) ON (SMT._H0010 = SRV._LOAN_NUM)
LEFT JOIN CHEC..SRVDSR SRV2 (NOLOCK) ON (SMT._H0010 = SRV2._LOAN_NUM)
LEFT JOIN MLS..tbl_MLS_MarketingSources S (NOLOCK) ON (S.SourceId = L.SourceId)
LEFT JOIN tbl_MLS_MarketingSourceGroups SG (NOLOCK) ON (S.SourceGroupId = SG.SourceGroupId)
LEFT JOIN tbl_MLS_ReportGroups RG (NOLOCK) ON (RG.ReportGroupID = SG.ReportGroupID)
LEFT JOIN (
SELECT
LONbr,
LOName = FullName,
EmploymentStatus,
ReHireDate,
HireDate,
TermDate
FROM MLS..vw_MLS_UsersWithLONbrs (NOLOCK)
) LO ON (LO.LONbr = L.LONbr)
LEFT JOIN MLS..tbl_MLS_Campaigns CAM (NOLOCK) ON (CAM.CampaignId = SG.CampaignId)
LEFT JOIN MLS..tbl_MLS_Vendors VEN (NOLOCK) ON (VEN.VendorId = L.VendorId)
WHERE L.DateReceived BETWEEN @BeginDate AND @EndDate + ' 23:59:59'
AND (CASE WHEN @ReportGroupId IS NULL THEN 1 WHEN @ReportGroupId = RG.ReportGroupId THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchTranType IS NULL THEN 1 WHEN @BranchTranType = B2.BranchTranType THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchDivision IS NULL THEN 1 WHEN @BranchDivision = B2.BranchDivision THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchRegion IS NULL THEN 1 WHEN @BranchRegion = B2.BranchRegion THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchNbr IS NULL THEN 1 WHEN @BranchNbr = L.BranchNbr THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchSatId IS NULL THEN 1 WHEN @BranchSatId = L.BranchSatId THEN 1 ELSE 0 END) = 1
AND L.ProviderId = L.OriginalProviderId
AND L.VendorId NOT IN (59, 60, 131) -- Exclude Turndown or Ghost leads
AND L.Deleted = 0
I need to add the field DateReceived from the following view:
dbo.vw_MLS_Leads
How should I code this?
As always thanks for the great answers and suggestions in advance.
Have a great day!
Kurt
Hello,I have a stored procedure: -- Get an individual league match by IDALTER PROCEDURE [dbo].[mb_League_GetLeagueMatchByID]( @LeagueMatchID int)ASSET NOCOUNT ONSELECT * FROM mb_LeagueMatch WHERE mb_LeagueMatch.LeagueMatchID = @LeagueMatchIDThe mb_LeagueMatch table has a column named IsActive that is a bit datatype.The value for all rows is set to true (in database explorer in visual studio 2005).When I execute the above stored procedure I always get -1 (I'm guessing that means null) as a result for IsActive if it was true and 0 when false (as expected).However, when I run a query on the database for the same parameter, I get the expected 1 as the value for IsActive.Has anyone seen this before?Thanks,Howard
View 4 Replies View RelatedHow can i create a stored procedure that count or sum value of field
e.g.
f1 f2
f3 f4 f5
record 1
1 2
3 1
and get answer like this 1=4 - 2=1 - 3=1
I need to update a field with the code below, is it possible to do this with a table join? The Query Analyzer is giving me an error at "Join".
An example:
(ManufSerNo is a field in table ASSETS,
Status is a field in table HISTORY)
GO
CREATE PROCEDURE sp_ChngeAssetStatus
@ManufSerNochar(10),
@Statusvarchar(1)
AS
UPDATE HISTORY
SET Status = @Status
JOIN ASSETS
ON HISTORY.AssetID = ASSETS.AssetID
WHERE ManufSerNo = @ManufSerNo
--ELSE
--RAISERROR ('Sorry, but the Asset ID specified does not exist. Record not updated.', 10 , 1)
GO
I am writing a utility that creates Java code to access a database. I am looking for a way to get a list of fields and types that are returned by an sproc. Is there any easy way to get this from the master? Do you need to parse the SQL? This list would be like what Visual Studio.NET shows, or interdev if I remember correctly.
Thanks,
Larry
I am very new to stored procedures and fairly new to SQL in general. I have a stored procedure that looks like this:
CREATE PROCEDURE sp_UpdateProductsTable
@prodName varchar(50),
@prodManufacturer varchar(50),
@prodShortDescrip text,
@prodLongDescrip text,
@prodCatId int,
@prodPrice varchar(6),
@prodSortOrder int,
@prodActive int,
@prodId int
AS
if( @prodId <> 0 )
begin
update Products set
Name = @prodName,
Manufacturer = @prodManufacturer,
ShortDescription = @prodShortDescrip,
LongDescription = @prodLongDescrip,
CategoryID = @prodCatId,
Price = @prodPrice,
SortOrder = @prodSortOrder,
Active = @prodActive
where ID = @prodId;
select ID as prodId from Products where ID = @prodId
end
if( @prodId = 0 )
begin
insert into Products ( Name, Manufacturer, ShortDescription, LongDescription, Price, CategoryID, SortOrder, Active )
values( @prodName, @prodManufacturer, @prodShortDescrip, @prodLongDescrip, @prodPrice, @prodCatId, @prodSortOrder, @prodActive );
SELECT SCOPE_IDENTITY() AS prodId
end
GO
I have recently added two new fields to the database that I need the stored procedure to act upon, but adding them into the above code does not work. I read somewhere that this would happen with new fields, but I do not know how to fix this issue. Could someone point me in the right direction and help me out? I also have some other tables and SP's that I need to update, but its the same issue, I think so fixing this one should help me out across the board.
Thanks in advance for your help.
I have this stored procedure that loops through a table and updates acouple of fields. For some reason one of the fields is not beingupdated. If I run the same code from query analyzer, it works fine.Let me know if anyone can figure out why @lastscandate would ever beNULL. If it is null it should be equal to @maildate. The senerio thatseems to fail is when no records are returned from the select statementto fill in @lastscandate. This should then active the next ifstatement and set the @lastscandate equal to the @maildate. MailDateis always filled in in the database and LastScanDate will be NULL.Thanks for your help.DECLARE c1 CURSOR LOCAL FORSELECT m.id, m.acctno, m.ordid, m.cycle FROM master m WITH (nolock)WHERE m.printstatus IN ('ST', 'ML') AND (m.batchid IS NULL OR m.batchid= 0) AND (m.maildate ='' OR m.maildate IS NULL)AND NOT EXISTS(SELECT * FROM packagemaster p WITH (nolock)WHERE m.acctno = p.acctno AND m.ordid = p.ordid AND m.cycle = p.cycleAND p.status NOT IN ('BM', 'PM'))OPEN c1FETCH FROM c1 INTO @mid, @acctno, @ordid, @cycleWHILE @@fetch_status = 0BEGIN--Get MailDate from Manifest - if NULL then use GetDateset @maildate = NULLSELECT @maildate = MAX(whenmailed) FROM manifest WITH (nolock)WHERE acctno = @acctno AND ordid = @ordid AND cycle = @cycleif @maildate is NULLset @maildate = getdate()--Get Last Scan Date from Transactions - if NULL then use MailDateset @lastscandate = NULLselect @lastscandate=max(actiondate) from transactions whereacctno=@acctno and ordid=@ordid and cycle=@cycle and actionid=303if @lastscandate is NULLset @lastscandate = @maildateBEGIN TRANSACTIONUPDATE master SET printstatus = 'ML', maildate = @maildate,lastscandate=@lastscandateWHERE id = @midINSERT INTO transactions (initials, actionid, machinelogin, acctno,ordid, cycle, program) VALUES ('RLT', 55, 'Mars', @acctno, @ordid,@cycle, 'Update Mail Dates')COMMIT TRANSACTIONFETCH NEXT FROM c1 INTO @mid, @acctno, @ordid, @cycleENDCLOSE c1
View 1 Replies View RelatedHow can I format a datetime field in a stored procedure to return just the date in MM/DD/YYYY format?
View 13 Replies View RelatedHello,
I am looking at writing a SP without much success which enables multiple filtering on one field. Something like below:
Input field: Product Description
So if the user enters: "Large Drill" OR "Drill Large" the same resultset will be returned.
SELECT * FROM products WHERE products.prod_desc contains both "Large" AND "Drill"
I guess there'll need to be a nested Select and loop to parse the space separated input field.
Any pointers would be appreciated.
Thank you
Lee
Is there a way to add a field or a stored procedure to a server running MSDE? Like a script on the command line or?? how can this be done.
Thank you,
Here's the deal:
I import a flat file from a legacy system, and then convert it into a single table. That works simply enough.
Then I have a SP that querys that table using a parameter for an accountID. My business tier calls that SP and returns the results to the calling tier (my web application). Easy enough...
Now for the question. The people who created the flat file (written in COBOL) decided to use "codes" to represent data. So, for instance, if I'm looking for the account plan, I can expect to see characters like ], or [, or +, etc... These characters have a special meaning, like:
] = Plan A
[ = Plan B
+ = Plan C, and so on.
Currently, the web application displays those characters, but I want it to display the actual plan name. Is there a way that when I execute the SP, the SP could pull the necessary records, and whenever it encounters a certain "plan" character, it could convert it into a "readable" name? Say that it sees that the plan_type field has a value of "]" for twenty records, so it converts those twenty records' plan_type value from "]" into "Plan A"? I'm not sure if I can do that, but I want to at least evaluate the option if I can.
I've evaluated other options, like using a CASE statement in my code, but I shot that down quickly...for obvious reasons. I don't wanna be changing my web application or business tier each time these guys update a plan name, or add a new one, delete an existing one, etc...
I've also thought about creating a dictionary table than contains the plan's code and its name, and then just INNER JOIN the first table with the dict table. This would keep my SP very simple (it's very straight-forward right now, and I like that). That way, if a plan name is ever changed, or a new one is added, I simply update the dict table using a simple query. However, if my SP is doing the conversion, I could just as easily update the SP.
Either of these methods would work for me, and I *do* know how to do the latter (dict table). However, there are quite a few other fields that I may have to do this for. I believe when I left for the day on Friday, my last count was 14 fields total that needed translation. That would mean 14 different dict tables! That could certainly affect my SP performance with all those INNER JOINS!
Therefore, I'm certainly interested in figuring out if it's possible to do the former method (SP), and then I shall decide which method is best for my situation.
Feel free to include your thoughts on which process you think is better as well. I'm really riding the fence with this one. However, if I can't find out how to change field values in my SP, then obviously I'll make a decision very quickly...
Thanks in advance.
I want to sort a stored procedure based on a variable passed to it... what is the easiest way to do this? Here's an example of what I want to do:
sp_select_thing 10, 'thing_name', 'asc'
It would run the query then somehow evaluate parameters 2 and 3 to be placed in the ORDER BY clause. I'm not sure if they should be quoted as strings or not, I don't have an idea how to pass a "reference to a variable" as a parameter to a stored procedure... or even if such a thing is possible
Thanks!
Hello everybody,
i have a problem with copying (read it from one row and set it to another) a ntext field in a stored procedure. I know how
to get a pointer to the data and how to read from it.
But i want to copy the whole data.
Does anybody know how to do that?
Thanks in advance
A.Gempp
-------------------------------
I'm using SQL Server 2000
I am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list.
Example
ItemID description DisplayOrder Action0 item 1 0 Moveup/move down1 item 2 1 Moveup/move down2 item 3 2 Moveup/move down
So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions?
Thanks - Mark
If I have a column named "Login" in a SQL Table (I am sharing with another application) that I am using a stored procedure to acquire the information from, how can I trranspose its name to match code already written in a Web App to get the data.
There is a web app already created that has the followig code to get the data from the database
Dim strSQL ast string = "UsersSelectCommand"
intLoginID = objDataReader("LoginID")
My stored procedure is the following:
CREATE PROCEDURE UsersSelectCommand/* ( @parameter1 datatype = default value, @parameter2 datatype OUTPUT )*/AS Select Lastname, FirstName, Login from Users Order by LastName
GO
The stored procedure will return "Login" instead of "LoginID" that I am wanting. How can I modify the Stored Procedure to change the LoginID to Login.
i have a student table and i created a stored procedure to insert a new student in this table but student_id field wich i put it as primary key got error because allready record has same value .how i can know the last row's student_id value and input a new valid value in one stored procedure thanks
View 1 Replies View Relatedbest solution for this stored procedure query.I'm getting the following error:
Column 'dbo.Applicants.submitted' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause. Here is my select query:
Code:
SELECT DISTINCT DATENAME(MONTH, submitted) AS mon, MAX(submitted) AS SubmitDate
FROM dbo.Applicants
WHERE ((CASE WHEN MONTH(submitted) > 8 THEN YEAR(submitted) + 1 ELSE YEAR(submitted) END) = @AcYr)
ORDER BY SubmitDate
The submitted field is a date field.I don't want to add the submitted field to Group By as I want to group by month not date.Is there any solution to avoid grouping by date?
Hallo !I have a Table with a column "ordernumber"ordernumberA12A45A77A88Is it possible to create a stored procedure which makes a string of these column ?Result: string = ('A12','A45','A77','A88')Thanks !aaapaul
View 3 Replies View RelatedHello:I have a stored procedure for generating our invoices in CrystalReports. I have added a new field to the SP, but when I try to add thefield to my Crystal Report invoice, the field isn't available in thelist. However, if I create a new, blank report using the same storedprocedure as the datasource, the field is available. I've seeminglytried every iteration of "Verify Database" to no avail.The obvious answer would be to simply drop the sp from my existingreport and then re-add it. However, if you do this, all your fields onthe report are dropped.Any ideas?Thanks,Scott
View 1 Replies View RelatedBasically, I have a complex stored procedure that combines two tables and fills a cursor.
I would like to fill another cursor in another stored procedure from the results of this first stored proc, rather than have to type it all in again.
The reason being that I am doing a one time import of some data from two tables into one new table based on some complex linking/querying.
Can I fill a cursor from the output of another stored procedure rather than an inline SELECT statement?
Does the sp I am using have to have cursor as an out parameter?
There is a stored procedure to run each Sunday. I would like to get the order date from previous Sunday through Saturday. Right now we code as
"OrderDate Between convert(datetime, '05/02/99') AND
convert(datetime, '05/08/99') "
Each week the dates have to be manually changed. How to use the date function to make it automated?
Hi all,I am trying to write a stored procedure that will delete records in atable that are older then 30 days. I am checking against a field thatis called PositionDate. Can someone point me in the right direction?TIA
View 4 Replies View RelatedI am trying to to a transaction count (per day) running a stored procedure that does a group by date. The problem is that since the date has a time stamp (I assume) it sees each date as a different group even if it's the same day. Is there a way to format the date in the stored procedure so that it sees all of the transactions on the same day as one or is there another way to do this.
Select count(recordid),transactiondatefrom sometable group by transactiondate
Thanks
in advance
Hi there,
I am trying to ascertain how many users have registered with my site today. I am using the following stored procedure:
CREATE Procedure spGetUserCountToday
As
Return ( SELECT Count(*) FROM tblUserList WHERE role= "User" AND registerDate >= GETDATE()
)
GO
However the issue is the GetDate() function will only return those that have resgistered at the exact moment the query is run.
How can I change the GetDate to return only those users who have registered in??
Thanks in advance,
TCM
Hi, I ran into some problem here. The case scenerio is supposed to be like this:
- Each member can only make one appointment at any one time and only
make another appointment after the existing appointment expired.
- Each member is allowed to make an appointment at any time and must be at least 5 days in advance.
I managed to do the reservation for at least 5 days in advance but I
can't allow the member to make only one appointment. The member can
keep making appointments even though the existing appointment has not
expired. Can someone pls help? Thanks!
ALTER PROCEDURE spReserveAppt(@AppDate DATETIME, @AppTime CHAR(4), @MemNRIC CHAR(9))
AS
BEGIN
IF NOT EXISTS(SELECT MemNRIC FROM DasMember WHERE MemNRIC = @MemNRIC)
RETURN -300
BEGIN
IF EXISTS
(SELECT COUNT(@MemNRIC)
FROM DasAppointment
WHERE (DATEDIFF(DAY, GETDATE(), @AppDate) < 5)
GROUP BY MemNRIC
HAVING COUNT(@MemNRIC) <> 0)
RETURN -301
ELSE IF EXISTS
(SELECT MemNRIC
FROM DasAppointment
WHERE (DATEDIFF(DAY, @AppDate ,GETDATE()) > GETDATE()))
RETURN -302
END
END
INSERT INTO DasAppointment(AppDate, AppTime, MemNRIC) VALUES (@AppDate, @AppTime, @MemNRIC)
IF @@ERROR <> 0
RETURN @@ERROR
RETURN
DECLARE @status int
EXEC @status = spReserveAppt '2005-08-16', '1900', 'S1256755J'
SELECT 'Status' = @status