Hi,
I have a requirement here :
I have a students table which has a field called StudentStatus.
[StudentStatus] represents the following : (-1 for deleted, 0 for edited, 1 for newly inserted).
I display the reports based on the Class and Section parameters. Now everytime the status is -1 for the student, I want the row to be striked (strikethrough) in the report. The row with 0 status needs to Italic.
How do I do this?
Thanks.
I have a 3 data flows with an oledb source, a script component and a sql server destination that reports success and that it wrote the rows to the table in question. However, the rows are not written to the SQL Server 2005 table that is the destination. I have many other data flows in the same package that work exactly the same way that insert the rows they should insert in the destination table.
An example of the message I get indicating success is as follows:
[DTS.Pipeline] Information: "component "SQL Server Destination" (75)" wrote 289 rows.
Has anyone else seen this behavior or have an idea what might be wrong? Why would the data flow report success when the rows were not, in fact, inserted in the destination table?
I have a Job that creates .CSV files at predetermined intervals (the delimiter is a tabstop) and every 5 minutes I have to retrieve These files one at a time and Import them into the relevant database.
My solution was to create a list of the files and insert this list into a temporary table where a Cursor would extract each filename one at a time and insert that Name into a BCP Statement. The BCP Statement is constructed using dynamic SQL.
Here the Cursor:
create table #filelist(filename nvarchar(100))
insert into #filelist exec xp_cmdshell 'dir C:BCP_Test /A-D /B'
declare @filename nvarchar(100)
declare @path nvarchar(100)
declare @bcp_open nvarchar(100)
[Code] ....
The code seems to work but although there are around 50000 lines in the .csv file, None of the lines are inserted.
hi friends,
i got a error while retrieving more than 100000 rows (records) from a table .. can any one tell me what is the maximum number of rows retrieve from a database to reports... and how can i overcome this issue...
comparing UNIQUEIDENTIFIER columns..This query returns several rows where the [ReportId] and [LastRunDate] columns are both NULL:
SELECT [c].[Name],[c].[ItemID],[xl].[ReportID]
, MAX([TimeStart]) [LastRunDate]
FROM [dbo].[Catalog] [c]
LEFT JOIN [dbo].[ExecutionLogStorage] [xl] on [c].[ItemID] = [xl].[ReportID]
WHERE [c].[Type] NOT IN (1,5) -- Not a folder or a data source!
group by [c].[Name],[c].[ItemID],[xl].[ReportID]
order by 4
However, trying to just list catalog reports with no execution history returns 0 rows, but I'm expecting it to return a row for every NULL [ReportId] from the above query:
SELECT *
FROM [dbo].[Catalog]
WHERE [Type] NOT IN (1,5) -- Not a folder or a data source!
AND [ItemID] NOT IN (SELECT [ReportID] FROM [dbo].[ExecutionLogStorage])
I even tried casting [ItemId] and [ReportId] columns in the 2nd query to VARCHAR(255), and still got no rows, but the following queries return 0 rows and 1 row (respectively).
select * from [dbo].[ExecutionLogStorage] where [ReportID] = '0BB2209C-7736-46C8-AD02-4614EBA4F0F1'
select * from [dbo].[Catalog] where [ItemID] = '0BB2209C-7736-46C8-AD02-4614EBA4F0F1'
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports,
Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting
or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
Hal1490
Hal9000
I have an already published application running several MS SQL Server 2000 Reporting Services report.
I need a way to find from either the reporting services log or the application server (IIS) logs or windows log
to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend?
How can I acheive this?
I have already got the IIS logs and it did not give the required info.
I have looked into the Reporting Services logs but it does not provide the info either.
Any help is appreciated
I have an already published application running several MS SQL Server 2000 Reporting Services report.
I need a way to find from either the reporting services log or the application server (IIS) logs or windows log
to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend?
How can I acheive this?
I have already got the IIS logs and it did not give the required info.
I have looked into the Reporting Services logs but it does not provide the info either.
Any help is appreciated
Hi does anyone know how to do the above with out going through reportserver url?
Preferably by using a cmd tool ? such rs.exe
or through the backend in the reportserver DB?
Thanks
Dave
Hi Friends,
Could I migrate the reports which are developed on SQL 2000 to SQL 2005. If Yes then How ...
Could anyone explain me. How it works.
Thanks
sqlferns
My issue is with converting multi-value parameters:
In Crystal Reports, you can set a parameter to accept multiple vales (Discrete, Range or Discrete and Range).
As an example:
I have a database table with a column called ID.
I can create a parameter called param_id and set the options of the parameter to "Allow multiple range values".
With this setup, I can limit the result set of the report by comparing the param_id parameter to the ID column in the database. Because param_id is a multi-value range parameter, I can pass it the following data:
1 - 50
60 - 80
150 - 127
This will only return results within those ranges.
Does anyone know if SSRS provides this kind of functionality?
Thanks,
Patrick Conway
Is there a way to copy reports from other users "My reports" folder? I am logging onto the management studio reporting services using an administrative account and I am able to view the reports from all users' "My Reports" folder. But I am not able to export them as an rdl file. I am able to export reports from other common folders, but not from the "My Reports" folder.
The reason I need to do this is some of the users have created some reports in one environment and the reports are available in their respective "My Reports" folder. I need to move these reports to their corresponding "My Reports" folder in another environment.
Is there a way to do this?
Thanks for your help.
Hi all,
I have two problems.
1. I downloaded ChartFXRSTrial and created one chart, and able to deploy it in ReportServer, but the problem is the reports are not showing there, i checked the configuration of .dll files in the help provided by chartFX, but couldn't get anything, so could help me on this.
2. How to give Tooltip for the X- axis or Y- axis values in the ReportServer , i tried using chartproperties of .rdl file, but didnt understand it. can help me on this, and one more i tried with Dundas too, If im giving tooltip as #valy then, it is showing samething in reportserver instead the values of 'Y-axis'.
Thanks,
Mahesh Manthena
I have 3 tables...
JobRequirements (A)
JobID int
QualificationTypeID int
EmployeeQualifications (B)
EmployeeID int
QualificationTypeID int
Employee (C)
EmployeeID int
EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
Hi,
We just deployed a report solution and I would like to know when and how much each report is used. Is there a report for it ?
With regards,
Constantijn Enders
Hi All,
I am using sql server 2005. I stuck out in a strange problem.
I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
But nothing is improving
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
Any sort of help would be highly appreciated.
Thanks,
I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.
How I can use this variable to email fellow users. For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.
Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Any sort of help would be highly appreciated.
Thanks,
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Hi i tried designing a SSIS package which loads only those rows which were different from existing rows in the table , i need to timestamp the existing row with an inactive date when a update of that row is inserted (ex: same studentID )
and the newly inserted row with a insert time stamp
so as to indicate the new row as currently active, in short i need to maintain history and current rows in same table , i tried using slowly changing dimension but could not figure out, anyone experience or knowledge regarding the Data loads please respond.
example of Data would be like
exisiting data
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
New row to insert would be
12 DDS 15 M DFG ST 4/5/07
the data should reflect
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 4/5/07
12 DDS 15 M DFG ST 4/5/07 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
Please provide your input as much as you can even though it might not be a 100% solution.
I had created a trigger which sees that whether a database is updated if it is its copy the values of the updated row into another control table now I want to read the content of control_table into BIzTalk and after reading I want to delete it.Can any one suggest the suitable ay to do this?
View 3 Replies View Related I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
Environment:
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows
2) importing each column into sql table
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
I managed to transpose rows into columns.
;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
Dear All
I have a table with the following structure in sql server 2005
create table app(
sno int,
name varchar(50),
add varchar(50),
city varchar(50),
state varchar(50)
)
it contains the follwing data
------------------------------------------
sno name add city state
------------------------------------------
1 mark street no1 newcity newstate
2 mark street no1 newcity newstate
3 mark street no1 newcity newstate
4 mark street no1 newcity newstate
5 mark street no1 newcity newstate
6 mark street no1 newcity newstate
7 mark street no1 newcity newstate
8 mark street no1 newcity newstate
9 mark street no1 newcity newstate
10 mark street no1 newcity newstate
11 mark street no1 newcity newstate
12 mark street no1 newcity newstate
13 mark street no1 newcity newstate
14 mark street no1 newcity newstate
15 mark street no1 newcity newstate
16 mark street no1 newcity newstate
17 mark street no1 newcity newstate
18 mark street no1 newcity newstate
19 mark street no1 newcity newstate
20 mark street no1 newcity newstate
----------------------------------------
I want to retrive previous 5 records, next 5 records and the record that meet the where condition of a select query.
When I run
select sno,add,name,city,state from app where sno=7
I want the following result
------------------------------------------
sno name add city state
------------------------------------------
2 mark street no1 newcity newstate |
3 mark street no1 newcity newstate |
4 mark street no1 newcity newstate | -- previous 5 records
5 mark street no1 newcity newstate |
6 mark street no1 newcity newstate |
7 mark street no1 newcity newstate --- searched record
8 mark street no1 newcity newstate |
9 mark street no1 newcity newstate |
10 mark street no1 newcity newstate |--- next 5 records
11 mark street no1 newcity newstate |
12 mark street no1 newcity newstate |
----------------------------------------
if there is a method to get the above result set, kindly post the query.
Hi, I need to write a query which I have never attempted before and could do with some help.... I have a Groups table and a Users_Groups look up table. In this model, users can only be assigned to 1 group. If a group is deleted, a trigger should fire and delete any rows in User_Groups having a matching Groups.Ref. Unfortunately, the trigger hasn't been firing and I now have a load of defunct rows in Users_Groups relating users to groups which do not exist.I now need to find all of these defunct rows in Users_Groups so that I can delete them. How can I find rows in Users_Groups where the parent rows and refs in Groups are null? I've tried searching the net for something similar but don't even know how to word the search properly to get any half relevant results. Cheers PS, I do realise I need to tighten the constraints on my database
View 5 Replies View RelatedI'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
Dear Gurus,I have table with following entriesTable name = CustomerName Weight------------ -----------Sanjeev 85Sanjeev 75Rajeev 80Rajeev 45Sandy 35Sandy 30Harry 15Harry 45I need a output as followName Weight------------ -----------Sanjeev 85Rajeev 80Sandy 30Harry 45ORName Weight------------ -----------Sanjeev 75Rajeev 45Sandy 35Harry 15i.e. only distinct Name should display with only one value of Weight.I tried with 'group by' on Name column but it shows me all rows.Could anyone help me for above.Thanking in Advance.RegardsSanjeevJoin Bytes!
View 4 Replies View Relatedhelo..
I have 100,000 rows in the database and I want to read results for eg: from 5000 to 5050 by DataReader.
I wrote this code to do this but its too slow:
Dim SlctStr As String = "select * from topicstbl where partID like '" & PagePartID & "'"
Dim ReadCom As New SqlClient.SqlCommand
ReadCom.CommandText = SlctStr
ReadCom.Connection = MainLib.MyConnection
Dim MyReader As SqlClient.SqlDataReader = ReadCom.ExecuteReader()
Dim StartTNum As Long = 5000
For IR As Long = 0 To StartTNum - 1
MyReader.Read()
Next
Do While MyReader.Read
StartTNum += 1
If StartTNum > 5500 Then Exit Do
'''''''''''''''''''
Loop
MyReader.Close()
is there another way to do the same thing better off than this code?
Dear Friends,
Is there any way to display a table data separately like odd rows and even rows?I dont know this is possible or not?If it is possible means how can i achieve it?Please guide me a proper way.
Thanks all!
kiruthika
http://www.ictned.eu