I did not get any reply for my previous post. So i am just trying to make my doubt clear.
I have a subquery within a distributed query.
Eg:
SELECT T1.deptID
FROM SERVER1.ACCOUNT.DBO.DEPT as T1
where deptid IN (SELECT T2.DEPTID
FROM SERVER2.DEPARTMENT.DBO.DEPT as T2
WHERE T1.DIVISIONID = T2.DIVISIONID)
In the above query.. T1.DIVISIONID is not recognoized and it says
T1 is not a table or alias name though I have declared it upfront.
You have to note that both the ACCOUNT and the DEPARTMENT database are on different servers.
If they are on the same servers, this should not be a problem at all. Also, all the security is working perfectly for running a distributed query for me.
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
Is there anyway of running a Store Procedure in Database A that's going against database B? I have a store procedure that does a select on table A in database A and a select on table B in database B.
The problem is that the user have exec rights to the store procedure, which is an object in database A. The store procedure won't run because of permission rights to table B in database B.
Is there anyway of queryiny table B without giving the user select rights to that table? Anyone out there had the same problem?
Many posted this message and no one anwered. i am facing the same problem now.
Got the error message
Server: Msg 7391, Level 16, State 1, Line 1 The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
My MSDTC is on. I had setup linked server using OLEDB.
Microsoft did'nt give enough info or solution for this. ANybody faced this prob and solved it?
I have a procedure where it runs a procedure on another server and returns the results to the calling procedure and dumps it into a temp table..
I get the following message: ----- Server: Msg 7391, Level 16, State 1, Procedure proc1, Line 60 The operation could not be performed because the OLE DB provider 'SQLOLEDB' does not support distributed transactions. [OLE/DB provider returned message: Distributed transaction error] ----
But both the servers are running the distributed transaction corordinator
example:
create procedure dbo.proc1 @param1 int as
create table #temp (col1 int col2 varchar(255) )
insert into #temp EXEC server.database.dbo.proc2 @param1 = @param1
Can anyone tell me why Query B (see below) works but Query A does not? When Query A is run the following error is received. I would love to know why using a subquery allows Query B to run.
Server: Msg 8623, Level 16, State 2, Line 1 Internal Query Processor Error: The query processor could not produce a query plan.
Query A. SELECT pt.Description, pa.Method_Order, os.LogAction, Sum(pa.Amount) Total FROM BO_PaymentAmountsApplied pa, BO_OrderStatusLog os, Members.members.dbo.MBR_PaymentTypes pt WHEREpa.LogID = os.LogID AND os.LogAction IN (1,2,3) AND pt.PmntTypeID = pa.MethodID AND pa.OrderID = 1526925 GROUP BY pt.Description, pa.Method_Order, os.LogAction
Query B. SELECT pt.Description, pa.Method_Order, os.LogAction, Sum(pa.Amount) Total FROM BO_PaymentAmountsApplied pa, BO_OrderStatusLog os, Members.members.dbo.MBR_PaymentTypes pt WHERE (pa.LogID = os.LogID) AND (os.LogAction IN (1,2,3)) AND (pt.PmntTypeID = pa.MethodID) AND (os.orderid = pa.orderid) AND (pa.OrderID in (select orderid from BO_PaymentAmountsApplied where orderid = 1526925)) GROUP BY pt.Description, pa.Method_Order, os.LogAction
I have the following distributed query. I am running it from SQL Server "CASTER" while it links databases from SQL1 and SQL2 Servers.
SELECT T1.ENTITY, T2.EMPLNAME, T1.EMPLID, T1.FISCAL_YR, T1.ACCOUNT_NBR10, T1.POSITION_NBR, JOBCLASS, FINAL_BGT_FTE, FINAL_BGT_PCT, FINAL_BGT_SAL, FINAL_BGT_FTB, TERM FROM SQL1.BUDGET.DBO.BDBPDCTB T1, SQL2.TECHRIS.DBO.TRBASCTB T2 WHERE T1.FISCAL_YR = '2003' AND T1.EMPLID > 0 AND T1.EMPLID = T2.EMPLID AND T1.ENTITY = 'H' AND T1.ORGID = 'TT' AND EXISTS (SELECT T3.EMPLID FROM SQL1.BUDGET.DBO.BDBPDCTB T3 WHERE T3.EMPLID = T1.EMPLID --------ERROR HERE AND T3.ENTITY = 'H' AND T3.FISCAL_YR = '2003' GROUP BY T3.EMPLID HAVING SUM(T3.FINAL_BGT_PCT) > 100) ORDER BY 1,2,5,6
In the error line, it says, T1 does not match with a table name or alias name used in the query.
SELECT T1.ENTITY, T2.EMPLNAME, T1.EMPLID, T1.FISCAL_YR, T1.ACCOUNT_NBR10, T1.POSITION_NBR, JOBCLASS, FINAL_BGT_FTE, FINAL_BGT_PCT, FINAL_BGT_SAL, FINAL_BGT_FTB, TERM FROM SQL1.BUDGET.DBO.BDBPDCTB T1, SQL2.TECHRIS.DBO.TRBASCTB T2 WHERE T1.FISCAL_YR = '2003' AND T1.EMPLID > 0 AND T1.EMPLID = T2.EMPLID AND T1.ENTITY = 'H' AND T1.ORGID = 'TT' AND EXISTS (SELECT T3.EMPLID FROM SQL1.BUDGET.DBO.BDBPDCTB T3,SQL1.BUDGET.DBO.BDBPDCTB T5 WHERE T3.EMPLID = T5.EMPLID --------NO ERROR AND T3.ENTITY = 'H' AND T3.FISCAL_YR = '2003' GROUP BY T3.EMPLID HAVING SUM(T3.FINAL_BGT_PCT) > 100) ORDER BY 1,2,5,6
When I am going to have the query like the above, i dont get any error.
SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=W:MyExcel.xls', 'select * from [Sheet1$]') which works on my local server with Microsoft office XP Professional installed
But keep on failing on the QA server which has MDAC installed only, no Microsoft Office installed
The error msg is 7399. I thought it's because of permission issue.
But problem still resides after I move the Excel file into that QA NT server and execute the statement with a service account which has sysadmin permission on both NT Server and SQL Server
What might be te reason?Why it's working perfectly in my Local server.
-------------------------------------- This is the error message:
Server: Msg 7399, Level 16, State 1, Line 2 OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ].
While running a distributed query i am having following problem.
' Server: Msg 7391, Level 16, State 1, Procedure t25, Line 8 The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ] OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. '
can any body give any solution for this ? Regards, Shabber.
I have 2 servers: myLocalServer (SQL2005) and myRemoteServer (SQL2000), both in the same LAN. I wish to syncronize a remote table with a local table (both share the same structure) by means of a stored procedure. The amount of rows to carry from the local to the remote table is about 20,000. The query takes more than a minute, and I would like to take down that time. Can you please help me?
myRemoteServer is declared in myLocalServer by means of a Linked Server object, and I declared a synonym called Syn_RemoteTable which represent the remote table.
First I tried a cursor, but it did not worked:
declare curLocalTable cursor local forward_only static read_only for select ID, Value from myLocalTable where UpdateTimeStamp>@LastUpdate
open curLocalTable fetch curLocalTable into @ID, @Value
while @@Fetch_Status=0 begin if exists(select ID from Syn_RemoteTable where ID=@ID) begin update Syn_RemoteTable set Value=@Value where ID=@ID end else begin insert into Syn_RemoteTable (ID, Value) values (@ID, @Value) end fetch curVentasMensuales into @ID, @Value end
close curLocalTable deallocate curLocalTable
Other way that I tried -performing equally poorly- was:
update Syn_RemoteTable set Value=T.Value from Syn_RemoteTable inner join ( select ID, Value from myLocalTable where UpdateTimeStamp>@LastUpdate ) as T on T.ID=Syn_RemoteTable.ID
insert into Syn_RemoteTable ( ID, Value ) select ID, Value from myLocalTable where UpdateTimeStamp>@LastUpdate and ID not in (select ID from Syn_RemoteTable)
Hello, I have been looking for an example of how to do an ad hoc distributed query to an MS Access database. I've tried this;
select * from OpenRowSet('Microsoft.Jet.OLEDB.4.0', '\Server1DataCorporateCPSDailyToolsTest.mdb' ;'admin';'',Names)
I recieve an OLEDB provider error when I try it this way. The version of Access is 2003. The database 'Test.mdb' is on a network share, and the table is called 'Names'. The share is located on the machine that hosts SQL Server 2000.
Is there a setting in sql server that can be set to allow/disallow ad hoc distributed queries?
I hope I'm in correct forum.. I'm working on simple OLE DB provider that should be usable in SQL server as a linked server. The provider should provide some support for SQL (certain SELECTs for now) and therefore I'd like the SQL server to delegate portions of query processing to the provider instead of fetching all rows and doing SELECT on its own.
Alas, I'm no OLE DB expert and my provider apparently doesn't implement enough things to actually make SQL server pass the query to it. My provider's session currently implements mandatory interfaces + couple of others (IDBCreateCommand, IDBSchemaRowset) and via provider properties, I 'claim' to have full support for SQL92. I'm testing the provider with SQL Server 2005 ('Express edition').
I'd like to know what am I missing in the implementation, or whether/how can I find out what makes SQL server decide between fetching full rowset and creating a command to let rthe query run in provider.
Three weeks ago we began a project that involved importing data from an AIX DB2 6 environment via a linked server configuration. Following the data import a second query was executed against the db2 environment using data that resides in the new table within SQL 7 in the join statement (a very basic example is provided below) This was all accomplished in sequence via a package.
SELECT F_NAME, L_NAME, PASSWD
FROM SQL7.LOCALSRV.dbo.NEWUSERTBL as new, DB2.SYSIBM.MASTERTBL.OLDUESRTBL as old
WHERE new.USER_ID = old.USER_ID
Originally we had no problems and while the execute time was not exactly speedy it was tolerable as we would revisit optimization after we established if what we were trying to accomplish was feasible. At the outset the first data import to build the local table was immeadeate and then the distributed query to retirieve more info to build another local table against the DB2 server took aproxiamtly 1 minute per user row returned. Currently we are looking at still having an immeadeate data import (a matter of seconds to build the first table)but now we are looking at more than 1 hour returned for 1 correesponding row of data off of DB2. We are utilizing the the IBM DB2 ODBC DRIVER.
Any input or suggestions as to what could be causing this or perhaps a more efficeint way to code the statement would be much appreciated. Thanks in advance.
Below given query is being executed on a Sql 2k box with 4CPU and 2GB RAM testXX.DB_GRP.dbo.group1-----> is a sql 7 box with single CPU and 512MB RAM The result set is abt 30,000 rows . This whole Process is taking abt 5 mins to do the Insert Process. Is there a way to optimise the query and bring down the execution time
insert into testXX.DB_GRP.dbo.group1 select num, group_num,group_desc from group2 where id = 20
--------------- If we just run the select num, group_num,group_desc from group2 where id = 20
it takes 10 secs to execute this selct statement so i was wondering why it takes 5 mins to do the insert process across the network thru linked server query.
I have created the following Distributed Query to maintain the current data between local server and Remote server:
EXEC SP ADDLINKEDSERVER 'SSNTDB2' go
-----UPATE asp org table set identity insert tn.asp org on go insert into tn.asp orhh ( ao key, ao name, ao pid, ao login link, ao login instr top, ao login instr bot,ao login link nm, ao lms enabled, ao lms prefix )SELECT ao key, ao name, ao pid, ao login link, ao login instr top, ao login instr bot,ao login link nm, ao lms enabled, ao lms prefix from SSNTDB2.icomm live.tn.asp org jung w WHERE jung.ao key not in ( select ao key from tn.asp orhh )
go set identity insert tn.asp org off go
---update themesw table
set identity insert tn.themesw on
go
insert into tn.themews (seq nbr,name,source dir,th desc,update by,update dt,partner id,Inst Payer Nbr,def lang key,t status,def audience key) SELECT seq nbr,name,source dir,th desc,update by,update dt,partner id,Inst Payer Nbr,def lang key,t status,def audience key FROM SSNTDB2.icomm live.tn.themes jun WHERE jun.seq nbr not in (select seq nbr from tn.themes) go
set identity insert tn.themesw off GO
EXEC droplinkedserver 'SSNTDB2'
I want to create the stored procedure to make this script run automatically and create a scheduled job so that the local server can be updated it's records periodically. What is the best way to do this? Any tips will be appreciated..
We have an interesting performance issue with a distributed query. When run by a system-administrator account, the remote computer returns the requested row set. It does the same thing for small row counts (<=7) for user accounts. On larger row counts, however, the user account returns the ENTIRE rowset from the remote table, and performs the restrict operation locally. Performance-wise, this results in a difference between 11 seconds and 12 MINUTES. I'm assuming it's some sort of security issue in DTC, but the remote server is on Windows Server 2000, and there's no security button for DTC under Component Services.
Suggestions?
The query in question is: EXEC ("INSERT INTO #XML (vin, ws_xml, lang_id) SELECT slo.vin, br.xml, br.lang_id FROM #SALE_LINEUP_ORDER slo INNER JOIN RemoteServer.mydatabase.dbo.build_record br ON slo.vin = br.vin INNER JOIN #LANGUAGE_IDS li ON br.lang_id = li.lang_id")
Hi Chaps!! I am in serious problem that My production sql 2000 server with winSp 4 and sqlSP 2 with slammer hotfix is not executing four part distributed query well when I combine the query with begin tran statement it enter into hang mode... else without begin tran it is fine.
request to all of u to get rid of this situation as some modules of our applicaiton is not functioning...
can sp3a installation help or going back to winSp2/3 will be helpfull. (recently we have applied winsp4 but i don't think this is concerned with it)
I am working on a linked server where a few of the queries use almost exclusively remote tables from 1 other server. I have read somewhere that there are options to specify where a query is performed but can't find it anywhere. Could someone tell me the command and how to use it or point me to something to read about it.
I have a huge problem as mentioned in my previous queries some of my applications is using Link Server Query as "select * from sm-matrix.matrix.dbo.stage_orders" this doesn't work it gives following error:-
ODBC: Msg 0, Level 18, State 1 SqlDumpExceptionHandler: Process 62 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. [OLE/DB provider returned message: Unspecified error]
I understand best method to use is "select * from openquery(sm-matrix,"select * from stage_orders")" but i can't do away with above mentioned query as lot of places in application it has been using.
This was working fine till i moved to Windows 2003 from Windows 2000.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
I am trying to store the column value to a variable from a distributed query.
The query is formed on the fly.
i need to accomplish something like this
declare @id int declare @columnval varchar(50) declare @query varchar(1024) @Query = "select @columnval = Name from server.database.dbo.table where id ="+convert(varchar,@ID) exec (@query) print @Columnname
The distributed query seems to work on the management studio of the server where I have linked the other server to but not accross the network on other management studio with the same impersonated logins. The error I get is.
OLE DB provider "SQLNCLI" for linked server "usbo-sql01" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
TestMachine1 runs SQL2005 SP2 and has as linked server myRemoteServer (SQL2000) server. I run an stored procedure in TestMachine1 which inserts about 20,000 rows to a table in myRemoteServer and brings back a similar quantity of rows. This stored procedures take about 1.5min to complete, but no error appears.
When running the same stored procedure in TestMachine2 (also SQL2005SP2), the following error appears after about 1 minute of execution (not the exact text):
SQLNCli. TCP Provider: network name is no longer available - communication link failure.
Please note that this stored procedure worked before on TestMachine2 (but with less than 10,000 rows) and that connectivity is proven among TestMachine1 and myRemoteServer, since I can execute "select * from synonym_MyRemoteTable" with no problems at all in the TestMachine2's Management Studio.
TestMachine1 and TestMachine2 have Windows XP Professional SP2; myRemoteServer has Windows 2003 and SQL Server 2000 SP4.
I'm experiencing issues importing XML data using a distributed query with the following statement which is run from an XP client named WorkstationA connecting to SQL2005 SP2 ServerB, the XML data is located on ServerC.
AdHoc Queries using OpenRowSet has been enabled and verified.
The SQL Server service is running using a domain user account with permissions to read the remote files. I have logged in locally to the SQL server and verified this. It still fails even if the SQL services are running using LocalSystem.
User on Workstation A is authenticated with Integrated security (SQL Admin) and has rights to read the XML files on ServerC.
WorkStationA = SQL2005 Mgt Studio running the query ServerB = SQL2005 SP2 ServerC = XML data files
DECLARE @xml XML SELECT @xml =CONVERT(XML, bulkcolumn, 2) FROM OPENROWSET(BULK '\SERVERCSHAREPATHDATAFILE.XML', SINGLE_BLOB) AS x SELECT @xml
Results: Msg 4861, Level 16, State 1, Line 2
Cannot bulk load because the file "\SERVERCSHAREPATHDATAFILE.XML" could not be opened. Operating system error code 5(Access Denied).
The query fails when it is run from Workstation A connected to SQL ServerB querying data on ServerC via a UNC. The query is succesful when it is run from the local SQL ServerB. The problem is with distributed queries. The query is succesful when the XML files are local to the SQL server including referencing them via a local UNC
