Substracting Values

Oct 22, 2007

Hi All,

I just want to calculate this formula in my report.

my code is as follows.






Code Block
WITH CDsTotalOutstandingCTE AS
(
SELECT type = 'CDs Total Out Standing'
, TotalOutStandingValue = (select sum(Amount)
from CertificateDeposit
where State = 'Current')

),
LoansTotalOutstandingCTE AS
(
SELECT type = 'Loans Total Out Standing'
, TotalOutStandingValue = (select sum(Amount)
from Loan
where State = 'Current')
),

combinedCTE AS
(
SELECT * FROM CDsTotalOutstandingCTE
UNION ALL
SELECT * FROM LoansTotalOutstandingCTE

)
SELECT *

FROM combinedCTE






Now I want to add another row to my table which would give Net Total Outstanding value.

It is calculated as follows.

Net outstanding value = TotalOutstandingValue(Calculated from CD table) - TotalOutstandingValue(Calculated from Loan table)


Can any one help me please?

View 3 Replies


ADVERTISEMENT

Precision Lost On Substracting Two Floats

Nov 2, 2007

Hi, first than nothing the query, I'm on sqlserver 2000:

--------------------------------------------------------------------------------------------------------
declare @ordered float
declare @convertion float

set @ordered = 49.0
set @convertion = 24.0

SELECT
CAST((@ordered / @convertion) AS float) as colA,
CAST((@ordered / @convertion) AS INT) as colB,

cast(CAST((@ordered / @convertion) AS float) - CAST((@ordered / @convertion) AS INT) as float) as [colA - colB],

ABS(CAST((@ordered / @convertion) AS float) - CAST((@ordered / @convertion) AS INT)) * @convertion as [The reminder]

--------------------------------------------------------------------------------------------------------

If you run that you'll get this result:

colA colB colA - colB The reminder
2.04166666666667 2 0.0416666666666665 0.999999999999996

You'll notice the workaround to get the decimal part of a number, if you wonder why its because sql2000 in the operand % only supports integers. Anyway, try on your calculator ( 2.04166666666667 - 2 ) it probably answer: 0.04166666666667.

BUT SQL NOT! you see how the result is amazingly 0.0416666666666665 ????

Does anybody knows a solution for this??? What am I doing wrong???

If you try the query but instead of 49.0 use 25.0, it returns the correct value !!.

I really appreciate any comment about this.

View 1 Replies View Related

Substracting Date, But With Hour Format As Results

Mar 25, 2008

Hi All,

i want to substracting two dates but the results in hh:mm format.

anybody know how to do that?

thanks!
Addin

View 7 Replies View Related

T-SQL (SS2K8) :: Count Number Of Values That Exist In A Row Based On Values From Array Of Numbers

Apr 16, 2014

How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:

Table Name: test1
Columns: m1 (int), m2 (int), m3 (int) >>> etc
Array/Row1: 1 2 3 4 5 6 7 8 9 10

------
Table Name: test2
Columns: n1 (int), n2 (int), n3 (int), n4 (int), n5 (int)

Row 1: 3, 8, 18, 77, 12
Row 2: 1, 4, 5, 7,18, 21
Row 3: 2, 4, 6, 8, 10

Answer: 2 out of 5
Answer: 4 out of 5
Answer: 5 out of 5

View 2 Replies View Related

Lookup / Merge Join / Script - Howto Look Up Values By Comparing To A Range Of Values?

Jun 4, 2007

Hello all,

I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:



"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _

" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _

" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _

" AND street_suff = @street_suff AND street_post = @street_post " & _

" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _

" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"



My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value



Any suggestions?



thanks for your time...

View 5 Replies View Related

NULL Values Returned When Reading Values From A Text File Using Data Reader.

Feb 23, 2007

I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?

View 12 Replies View Related

Power Pivot :: Calculating Values For Future Dates Based On Past Values

Nov 13, 2015

I am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?

View 6 Replies View Related

Transact SQL :: Convert Comma Separated String Values Into Integer Values

Jul 28, 2015

I have a string variable

string str1="1,2,3,4,5";

I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :

declare @id varchar(50)
set @id= '3,4,6,7'
set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype
select *from ehsservice where id in(@id)

But this query throws following error message:

Conversion failed when converting the varchar value '3,4,6,7' to data type int.

View 4 Replies View Related

How Do I Enter In A Default Values For A Report Parameter That Accepts Multi Values

Apr 11, 2008



I have my stored procedure set to
Territory_code IN (@Territory)

, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?

The field is a Varchar 20

View 1 Replies View Related

Compare Incoming Input File Row Values With Database Row Values In SSIS

Jan 23, 2008

Hi All,

I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?

Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.

I found some thing to achieve the above thing.
1. Take the input row and check in the database.
2. If the row is not found in the database then treat it as new row.
3. If row is found in the database then
a) Take the source row and prepare a concatenated string for all the columns
b) Take the database row and prepare a concatenated string for all the columns
c) Find out the hash code for the 2 strings and then compare hash codes for equal.

The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.

Can anybody suggest a good method to do this?

What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do?
Will it generates hash code based on all the columns values?

Pls clarify.

Regards
Venkat.

View 1 Replies View Related

Reporting Services :: SSRS - Get Common Values Between Two Columns Where Values Sorted Comma Separated

May 6, 2015

I have a situation in SSRS to get the common values between the two columns where the values are sorted comma separated as below.Ex:

ColumnA :  abc,cde,efg    
ColumnB : cde,xyz,abc    

the result in    

ColumnC : cde,abc

similarly Column A and B will have n number records. I need to right an expression or the Code function to get the required result in ColumnC. I am using SharePoint Lists as Datasource. Cannot write SQL query to achieve this requirement.

View 5 Replies View Related

Reporting Services :: Selecting Multiple Parameters Values For Comma Separated Values In SSRS?

Jun 17, 2012

I am SSRS user, We have a .net UI from where we want to pass multi select values, but these values are comma separated in the database. how can I write a sql query such that when I select multi values on my UI, the comma separated values are take care of.

View 5 Replies View Related

SQL 2012 :: Generating Date Range Values (start / End Dates) From Month Columns With Boolean Values

Jan 13, 2015

I've got some records like this:

ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0

where each month field has a 0 or 1, depending on if the person was enrolled that month.

I'm being asked to generate a table like this:

ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014

Is there some slam dunk way to do this without a bunch of If/Then statements?

The editor compressed all my space fields, so the column headers are off in some places.

View 8 Replies View Related

T-SQL (SS2K8) :: Dynamically Change Values In Script Based On 3 Values

Feb 27, 2014

I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the

1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:

where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)

2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.

3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)

If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9]
...
[8_4],[8_7]
...
[14_1], [14_2],...[14_10]
etc.

Again, the series are usually discontinuous and specific to each specialty.

Here's the portion of the script (it's at the end) that I'm talking about:

--change values in square brackets below for each specialty as needed and change the denom number in the very last query.

if object_id('tempdb..#tempAllergy') is not null
drop table #tempAllergy
select *
into #tempAllergy
from
dbo.#temp2 T

[Code] ....

If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.

View 6 Replies View Related

SQL Server 2012 :: Replace All Values In String With Values From Look Up Table

Mar 19, 2014

I have a table that lists math Calculations with "User Friendly Names" that look like the following:

([Sales Units]*[AUR])
([Comp Sales Units]*[Comp AUR])

I need to replace all the "User Friendly Names" with "System Names" in the calculations, i.e., I need "Sales Units" to be replaced with "cSalesUnits", "AUR" replaced with "cAUR", "Comp Sales Units" with "cCompSalesUnits", and "Comp AUR" with "cCompAUR". (It isn't always as easy as removing spaces and added 'c' to the beginning of the string...)

The new formulas need to look like the following:

([cSalesUnits]*[cAUR])
([cCompSalesUnits]*[cCompAUR])

I have created a CTE of all the "Look-up" values, and have tried all kinds of joins, and other functions to achieve this, but so far nothing has quite worked.

How can I accomplish this?

Here is some SQL for set up. There are over 500 formulas that need updating with over 400 different "look up" possibilities, so hard coding something isn't really an option.

DECLARE @Synonyms TABLE
(
UserFriendlyName VARCHAR(128)
, SystemNames VARCHAR(128)
)
INSERT INTO @Synonyms
( UserFriendlyName, SystemNames )

[Code] .....

View 3 Replies View Related

SQL 2012 :: Find Out Values Of Parameters When SP Is Executed With Default Values?

May 30, 2014

I am working with SP. How can we find out values of parameters when the SP is executed with the default values?

View 9 Replies View Related

Generate Values Between A Starting And Stopping Point (time Values).

Apr 23, 2007

[RS 2005]

Given the starting and stopping points (time values), how do I generate values between these points.

For example, if I have 08 (representing Hour) as a starting point and 12 as a stopping point.

From this I would like to generate a data sequence like 08, 09, 10, 11, and 12.

So how do I accomplish this? In SQL or in the RS?

The only thing I can think of is using a WHILE loop and a temporary table in SQL (not to keen on doing this).



//Håkan

View 7 Replies View Related

Transact SQL :: CTE To Peg Char Values To Int Values In Radio-style Chart

Aug 26, 2015

I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements?  I've updated my query as below. Although this sample query works, it's not working for my real data.  Instead, I get an error.  At the bottom is the error part of my real query.I copied all of the tables from the first query block below.  But when I wrote the bottom query block, it underlined in red the words "answer" and "question."  It says "Invalid column name". 

if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values')
) DROP TABLE #hard_values;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data')
) DROP TABLE #dummy_data;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')

[code]...

View 13 Replies View Related

Execute Package Utility / Set Values / How To Set Property Path And Values

Feb 4, 2008

Hi
I have one problem in SSIS for passing Variable Values while executing Package. I'm giving in details as below:

I opened Microsoft SQL Server Management Studio
Made Connection to Integration Services
To Execute Package I Right Clicked and Click on Run Package
Then I Clicked on Execute and package was executed successfully.

Problem is that if I try to Set Values then Package through Error
DTExec: Could not set ProcessMode value to M.

Basically I could not understand in which format I should pass the Variables.
What I tried is listed below:

ProcessMode;M
Package.Variables[User:rocessMode].Value;M
Package.Variables[ProcessMode].Value;M
But every time I got errors.

And then I tried from Command Line
DTEXEC /DTS "MSDBLoad_Order" /SERVER SERVERNAME /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V /SET Package.Variables[ProcessMode].Value;M

First time Process run successfully. And it has changed the ProcessMode to M also. But after that it was also not changing the ProcessMode Value to M.

Please help in regarding. I tried a lot from Site examples also, but could not get proper solution.


Thanks in advance
Bhudev

View 12 Replies View Related

Integration Services :: SSIS Reads Nvarchar Values As Null When Excel Column Includes Decimal And String Values

Dec 9, 2013

I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?

CREATE TABLE [dbo].[Import_CustomerSales](
 [CustomerId] [nvarchar](50) NULL,
 [CustomeName] [nvarchar](50) NULL,
 [CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]

View 5 Replies View Related

T-SQL (SS2K8) :: Aggregate Monthly Values From Interval Values?

May 14, 2014

I want to aggregate to monthly values for the reading. I want to display Reading value for Oct 2010, November 2010 likewise My question is simple and I have tried to follow the etiquette.

Currently it is displaying.....

MeterIDReadingdateReading
3969 22/10/2013 0:150
3969 22/10/2013 0:300
3969 22/10/2013 0:450
3969 22/10/2013 1:000
3969 22/10/2013 1:150
3969 22/10/2013 1:300
3969 22/10/2013 1:450
3969 22/10/2013 2:001
3969 22/10/2013 2:150
MeterId int
ReadingDate datetime
Reading real

-===== If the test table already exists, drop it

IF OBJECT_ID('TempDB..#mytable','U') IS NOT NULL
DROP TABLE #mytable

--===== Create the test table with

CREATE TABLE #mytable
(
meterID INT PRIMARY KEY,
Readingdate DATETIME,
reading real
)

--===== Setup any special required conditions especially where dates are concerned

SET DATEFORMAT DMY
SELECT '4','Oct 17 2013 12:00AM','5.1709' UNION ALL
SELECT '4','Oct 17 2013 12:15AM','5.5319' UNION ALL
SELECT '4','Nov 17 2013 12:00AM','5.5793' UNION ALL
SELECT '4','Nov 17 2013 14:00AM','5.2471' UNION ALL
SELECT '5','Nov 17 2013 12:00AM','5.1177' UNION ALL
SELECT '5','Nov 17 2013 14:00AM','5.5510' UNION ALL
SELECT '5','Dec 17 2013 15:00AM','5.5128', UNION ALL
SELECT '5','Dec 17 2013 16:00AM','5.5758' UNION ALL

Output should display as

MeterId Period Reading

4 Oct 13 10.20
4 Nov 13 10.40
5 Oct 13 10.20
5 Nov 13 10.40
4 Dec 13 11.15

View 4 Replies View Related

Analysis :: Bitmask Column Values As Dimension Values

Jun 18, 2015

Bitmask fields! I am capturing row changes manually via a high frequency ETL task.  It works effectively however i am capturing the movement of multiple fields.  A simple example, for Order lines, i have a price, a discount and a date.  I am capturing a 001, 010, 100 respectively for each change.  

I would like my users to be able to select from a dimension which has the 3 members in it and they can select one, multiples, or all values (i.e. only want to see rows that have had the date and price changed). 

Obviously if i only had 3 columns i would use bit's and be done with it, i have many different values (currently around 24 and growing).

View 2 Replies View Related

Default Values Does Not Include All The Values (Cascading Parameters)

Mar 18, 2007

A have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.

One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).

If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with  Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.

What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.

 

View 8 Replies View Related

Null Values For Datetime Values Converted To '0001-01-01'

Mar 29, 2006

Hi

can somebody explain me how I can assign a NULL value to a datetime type field in the script transformation editor in a data flow task.
In the script hereunder, Row.Datum1_IsNull is true, but still Row.OutputDatum1 will be assigned a value '0001-01-01' which generates an error (not a valid datetime). All alternatives known to me (CDate("") or Convert.ToDateTime("") or Convert.ToDateTime(System.DBNull.Value)) were not successful.
Leaving out the ELSE clause generates following error: Error: Year, Month, and Day parameters describe an un-representable DateTime.




If Not Row.Datum1_IsNull Then

Row.OutputDatum1 = Row.Datum1

Else

Row.OutputDatum1 = CDate(System.Convert.DBNull)

End If



Any help welcome.

View 1 Replies View Related

Adding Values To A Parameter That Can Take Multiple Values

Jun 6, 2007

If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?

View 2 Replies View Related

How To Delete All The Values In A Table Before Inserting New Values.

Jun 9, 2008

Gurus,
I have two list boxes, user can move items back n forth, from second listbox I am inserting values into a table. So far everything is working fine.
Now I want to delete all the existing  values from the table before inserting evertime..Please help me in this I dont know what to do.
thanks
 kalloo
 

View 8 Replies View Related

Checking To See If Values Are In A Table Or Not -- If Not Then Inserting The Values.

Jun 22, 2005

I'm trying to checking my production table table_a against a working table table_b (which i'm downlading data to)Here are the collumns i have in table_a and table_bDescription | FundID (this is not my PK) | Money I'm running an update if there is already vaule in the money collumn.  I check to see if table_a matches table_b...if not i update table a with table b's value where FundID match up.What i'm having trouble on is if there is no record in table_a but there is a record in table_b.  How can I insert that record into table_a?  I would like to do all of this (the update and insert statement in one stored proc. if possible.  )If anyone has this answer please let me know.Thanks,RB

View 3 Replies View Related

Select Values From One Table Based Upon Values In Another...

May 19, 2006

How do I:Select f1, f2, f3, from tb1 where f1=Select f1 from tb2 where f1='condition'?

View 3 Replies View Related

Use Order By But Want NULL Values As High Values

Nov 9, 2000

Hi,

My query "select blah, blah, rank from tablewithscores" will return results that can legitimately hold nulls in the rank column. I want to order on the rank column, but those nulls should appear at the bottom of the list

e.g.

Rank Blah Blah
1 - -
2 - -
3 - -
NULL - -
NULL - -

At present the NULLs are at the top of the list, but I do not want my ranking in descending order. Any suggestions?

Thanks
Dan

View 1 Replies View Related

How Can I Insert Date Values From Char Values

Jan 4, 1999

My process return a date in char format like "3/12/1998",
How could I put this data ( in char ) directly to date ISQ Server field ?

Thank's

View 1 Replies View Related

'Insert Into' For Multiple Values Given A Table Into Which The Values Need To Go

Sep 1, 2007

Please be easy on me...I haven't touched SQL for a year. Why given;



Code Snippet
USE [Patients]
GO
/****** Object: Table [dbo].[Patients] Script Date: 08/31/2007 22:09:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Patients](
[PID] [int] IDENTITY(1,1) NOT NULL,
[ID] [varchar](50) NULL,
[FirstName] [nvarchar](50) NULL,
[LastName] [nvarchar](50) NULL,
[DOB] [datetime] NULL,
CONSTRAINT [PK_Patients] PRIMARY KEY CLUSTERED
(
[PID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF


do I get

Msg 102, Level 15, State 1, Line 3

Incorrect syntax near ','.
for the following;




Code Snippet
INSERT INTO Patients
(ID, FirstName,LastName,DOB) VALUES
( '1234-12', 'Joe','Smith','3/1/1960'),
( '5432-30','Bob','Jones','3/1/1960');


Thank you,
hazz

View 3 Replies View Related

Breaking Monthly Values Down Into Daily Values

May 18, 2007

Hi all, I'm new to MDX and am getting very confused with a script.

I'm running into problems breaking down monthly measures to daily values. If I have a monthly measure of 50, I would like to divide it by the number of days in the month to come up with daily values.

I believe I have set the proper granularity for the measurement relationship against the time dimension and have added the following script to my MDX script:

[Date].[Date].Members = [Measures].CurrentMember / [Date].[Calendar].CurrentMember.Parent.Children.Count

When I submit a query like this:

SELECT [Measures].[Measurement Objective] ON 0,
MTD([Date].[Calendar].[Date].&[20070207]) ON 1
FROM [Cube]

Everything looks good. The query returns seven rows, each with a properly scaled version of the monthly measurement. However, when I write the following query to return a single MTD value:

SELECT [Measures].[Measurement Objective] ON 0
FROM [Cube]
WHERE MTD([Date].[Calendar].[Date].&[20070207])

It doesn't work. It gives me the error:

The MDX Function CURRENTMEMBER failed because the coordinate for the
'Calendar Year' attribute contains a set

I'm sure this is just a matter of me misunderstanding MDX. Any help would be appreciate.
Thanks,
Richard

View 5 Replies View Related

Transact SQL :: Getting Primary Key Values As A List Of Values

Oct 14, 2015

I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below

Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved