How can i create a stored procedure that count or sum value of field
e.g.
f1 f2
f3 f4 f5
record 1
1 2
3 1
and get answer like this 1=4 - 2=1 - 3=1
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Hi,
I would like to add custom paging to my ASP.Net pages. How can I use Count(*) in a query such as below to retrieve a record count?
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGO
ALTER PROCEDURE [dbo].[view_icon_photos] @Filenumber int = '0' , @Location nvarchar(50)= '-1' , @Rubric nvarchar(MAX)= '-1' , @Author nvarchar(75)= '-1' , @startRowIndex int= '-1' , @maximumRows int= '0'
As
IF @Filenumber = '0' AND @location > '-1' AND @Rubric = '-1' AND @Author = '-1' AND @startRowIndex > '-1' AND @maximumRows >'0'Select Icon, Filenumber, RowRankFrom(Select Icon, Filenumber, Row_Number () Over ( Order By Filenumber ASC ) AS RowRankFrom dbo.photosWhere Location = @Location)As IconRank Where RowRank > @startRowIndex AND RowRank <= (@startRowIndex + @maximumRows)
hello,
i have a list of Categories and each one contains a list of SubCategories, and i use a nested Repeater to show each Category with their SubCategories, but because are to many to show verticaly, i want to make 2 nested repeaters and in the first one to show only the first "n" Categories with their SubCategories and in the second Repeater should be the last n Categories, and like so they will be in 2 colums
How can i use the COUNT function in my stored procedure to take only first n Categories?
I used SELECT * FROM Categories WHERE CategoryID <= 5 but i don't want to order by the primary key i want to order by a COUNT or something like this...
here is my stored procedure (i use it for two nested Repeaters)ALTER PROCEDURE SubCategoriiInCategorii
CategoryID int)
AS
SELECT CategoryID, Name, Description FROM Categories WHERE CategoryID = @CategoryIDORDER BY Name
SELECT p.SubCategoryID, p.Name,p.CategoryID FROM SubCategorii p
ORDER BY p.Name
i hope you understand what i mean, thank you
what's wrong with the following code? COUNT for completed and exempted doesn't return correct values. they return same values. but when i remove one count it's returning right COUNT. i need to return the COUNT from two tables with a single query. how can i accomplish that??? is there anything wrong with my code below?
<code>
CREATE PROCEDURE dbo.Test AsSELECT s.StudentIdNum, c.[Name], COUNT(*) AS Completed, COUNT(*) AS exempted FROM StudentEnrolled AS s JOIN StudentCourse AS sc ON s.StudentKey = sc.StudentKey JOIN Courses AS c ON sc.CourseID = c.CourseIDLEFT JOIN ModuleEnrolment AS m ON sc.StudentCourseID = m.StudentCourseIDLEFT JOIN ModuleExemption AS e ON sc.StudentCourseID = e.StudentCourseIDWHERE m.Status = "Completed"GROUP BY s.StudentIdNum, c.[Name]
</code>
I have the following for sql server 2000...
Select b.courseName, a.courseId, count(a.courseId) as [count], avg(convert(INT, a.fldScore)) as [average], count(fldPass) as [passed], count(fldPass) as [failed] From tblTest a inner join tblTest2 b on a.courseId = b.courseId Group by a.courseId, b.courseName
Problem is the [passed] and [failed]
As it is, it's counting all of them.
I need to adjust it so passed will only read where fldPass = 'yes'
and fldPass = 'no' for the passed and failed.
Suggestions?
Thanks,
Zath
Hi all,
I'm using sql 2005. Can some one please tell me how to write dynamic sql for count. What i want is that i want to count the number of employees existing for the given department names and get the counted values as output into my vb.net 2.0 project. If any one know who to write this please send the code.. Please help me.. I want the below code to change to dynamic sql:
Alter proc GetCountforemp
@DestName varchar(200)=null,
@total int output
as
begin
SELECT @total = Count(distinct Employee.EmployeeID) FROM Employee
INNER JOIN Dest R on R.DestID=Employee.DestID
WHERE R.DestName in ('''+@DestName+''')
end
Would like to get a total count from Quantity Column for (Each individual ProductID # entered) from the ProductID Column. And insert (the New total Value count into the QtySold Column.
Does anyone have an idea how to write a stored Procedure for this?
The tables name is OrderItems which contains the following columns:
uid, OrderID, ProductID, Quantity, QtySold, ProductName, Price,
Many Thanks
Having a little trouble with this sp... just need to return the count.....CREATE PROCEDURE dbo.getTotalObjectives @courseId VARCHAR(20) ASBEGIN DECLARE @errCode INT
SELECT count(*) FROM objstructure WHERE courseId = @courseId
SET @errCode = 0 RETURN @errCode Can only return one thing, @errCode, but can return others in the select statement....I did it before like.....SELECT @lessonLocation = lessonLocation FROM cmiDataModel WHERE studentId = @studentIdand got the lessonLocationAnd, in code behind, I know this may be off as well....sObjNum = command.Parameters[ "@courseId" ].Value.ToString();The @courseId should be the count????Thanks all,Zath
I am trying to determine the number of columns that are returned froma stored procedure using TSQL. I have a situation where users will becreating their own procedures of which I need to call and place thoseresults in a temp table. I will not be able to modify those usersprocedures. I figure if I have the number of columns I can dynamicallycreate a temp table with the same number of columns, at which point Ican then perform an INSERT INTO #TempTableCreatedDynamically EXEC@UserProcCalled. With that said, does anyone have any idea how todetermine the number of rows that an SP will return in TSQL?Thanks!
View 2 Replies View RelatedHi again, and so soon...Having just solved my previous issue, I am now trying to call this stored proc from my page.aspx.vb code. Firstly the stored proc looks like this:----------- ALTER PROCEDURE dbo.CountTEstAS SET NOCOUNT ON DECLARE @sql nvarchar(100); DECLARE @recCount int; DECLARE @parms nvarchar(100); SET @sql = 'SELECT @recCount1 = COUNT(*) FROM Pool 'SET @parms = '@recCount1 int OUTPUT' exec sp_executesql @sql, @parms, @recCount1 = @recCount OUTPUTRETURN @recCount -------------When tested from the stored proc, the result is: @RETURN_VALUE = 4 My code that calls this stored proc is: Dim connect As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") connect.Open() Dim cmd As New SqlCommand("CountTEst", connect) cmd.CommandType = CommandType.StoredProcedure Dim MyCount As Int32 MyCount = cmd.ExecuteScalar connect.Close() So I expext MyCount = 4 but this code returns MyCount = 0 With the RETURN statement in the stored proc, and then calling it via MyCount = cmd.ExecuteScalar, I didn't think I need to explicitly define any other parameters. Any help please. thanks,
View 5 Replies View RelatedI seem to have a little problem with my SQL. I'm attempting to use a an .NET grid-view to page a list of search results using an ObjectDataSource (ODS). It's a very simple search setup. The ODS retrieves the Search keyword from the query-string sending it to the BLL's GetResult method which then utilises the DAL's version and retrieves the result. Not all of them of course because I'm paging so it only retrieves the first page (Lets say the first 10 items). This part of the SQL works fine as the same SQL method is used else where on the site and it's well tested. But to to use the Paging function I'm using the SelectCountMethod attribute of the ODS. Again this gets the Search term from the QueryString and sends it too the BLL which retrieves the information from the DAL. Now this is where it starts playing up. The Sql count method is as follows and is run as a Stored Procedure: 1 ALTER PROCEDURE dbo.StoreName_Store_GetProductSearchCount
2 (
3 @SearchQuery nvarchar
4 )
5 AS
6 SET NOCOUNT ON
7
8 SELECT COUNT(*)
9 FROM StoreName_Products
10 WHERE Title LIKE '%' + @SearchQuery + '%'
Nice and Easy. Not a Problem... Isn't it? When I run this query by selecting the database in the Server Explorer in VS2005 and running a 'New Query', it retrieves the correct results. (I only run this query from the Start of the SELECT Query in this mode, don't add the stuff above it)When I run this query through the website as intended and retrieves the int from the Stored Procedure, it always returns the entire count of the number of products in the table.At first I thought It might be a simple error with my caching system. Nope, it's not as after I purged it, it still returns the same value. I thought, well maybe just maybe the BLL or the DAL are some point converting it to this number but I'm quite sure it wasn't... and nope it wasn't that either because the ExecuteScalar method was found to be returning this number. So I ran the Stored Procedure by opening it up and simply right clicking the SQL Query and Executing it adding a value for @SearchQuery when it requested. Bingo. It's returning the full number of the products.So my question is... What's the deal? How can the same query return two completely different results? and most of all... How do I overcome this? Is this because it's in a stored procedure and I should be executing it as a SqlCommand from my DAL? I'm a bit confused. Is there a problem running this sort of query in a stored procedure that I don't know about and probably really should?Thankful for any answers,Regards,Luke
I have a stored procedure named mySP that looks basically like this:Select Field1, Field2From tblMyTableWhere Field 3 = 'xyz'What I do is to populate an Access form:DoCmd.Openform "frmMyFormName"Forms!myFormName.RecordSource = "mySP"What I want to do in VBA is to open frmContinuous(a datasheet form) ifmySP returns more than one record or open frmDetail if mySP returnsonly one record.I'm stumped as to how to accomplish this, without running mySP twice:once to count it and once to use it as a recordsource.Thanks,lq
View 1 Replies View Relatedin my procedure, I want to count the number of rows that have erroredduring an insert statement - each row is evaluated using a cursor, soI am processing one row at a time for the insert. My total count tobe displayed is inside the cursor, but after the last fetch is called.Wouldn't this display the last count? The problem is that the count isalways 1. Can anyone help?here is my code,.... cursor fetchbegin ... cursorif error then:beginINSERT INTO US_ACCT_ERRORS(ERROR_NUMBER, ERROR_DESC, cUSTOMERNUMBER,CUSTOMERNAME, ADDRESS1, ADDRESS2, CITY,STATE, POSTALCODE, CONTACT, PHONE, SALESREPCODE,PRICELEVEL, TERMSCODE, DISCPERCENT, TAXCODE,USERCOMMENT, CURRENCY, EMAILADDRESS, CUSTOMERGROUP,CUSTINDICATOR, DT_LOADED)VALUES(@ERRORNUM, @ERRORDESC,@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY,@STATE, @POSTALCODE, @CONTACT, @PHONE, @SALESREPCODE,@PRICELEVEL, @TERMSCODE, @DISCPERCENT, @TAXCODE,@USERCOMMENT, @CURRENCY, @EMAILADDRESS, @CUSTOMERGROUP,@CUSTINDICATOR, @DTLOADED)SET @ERRORCNT = @ERRORCNT + 1END --error--FETCH NEXT FROM CERNO_US INTO@CUSTOMERNUMBER, @CUSTOMERNAME, @ADDRESS1, @ADDRESS2, @CITY, @STATE,@POSTALCODE, @CONTACT,@PHONE,@SALESREPCODE, @PRICELEVEL,@TERMSCODE,@DISCPERCENT, @TAXCODE, @USERCOMMENT, @CURRENCY,@EMAILADDRESS,@CUSTOMERGROUP, @CUSTINDICATOR, @DTLOADED--IF @ERRORCNT > 0INSERT INTO PROCEDURE_RESULTS(PROCEDURE_NAME, TABLE_NAME, ROW_COUNT,STATUS)VALUES('LOAD_ACCOUNTS', 'LOAD_ERNO_US_ACCT', @ERRORCNT, 'FAILEDINSERT/UPDATE')END -- cursorCLOSE CERNO_USDEALLOCATE CERNO_US
View 1 Replies View RelatedHi Guys,
I have a sql procedure that returns the following result when I execute it in query builder:
CountE ProjStatus
6 In Progress
3 Complete
4 On Hold
The stored procedure is as follow:
SELECT COUNT(*) AS countE, ProjStatusFROM PROJ_ProjectsGROUP BY ProjStatus
This is the result I want but when I try to output the result on my asp.net page I get the following error:
DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.Source Error:
Line 271: </asp:TemplateColumn>
Line 272: <asp:TemplateColumn>
Line 273: <itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
Line 274: </asp:TemplateColumn>
Line 275: </columns>
My asp.net page is as follows:
<script runat="server">
Dim myCommandPS As New SqlCommand("PROJ_GetProjStatus")
' Mark the Command as a SPROC
myCommandPS.CommandType = CommandType.StoredProcedure
Dim num as integer
num = CInt(myCommand.ExecuteScalar)
'Set the datagrid's datasource to the DataSet and databind
Dim myAdapterPS As New SqlDataAdapter(myCommandPS)
Dim dsPS As New DataSet()
myAdapter.Fill(dsPS)
dgProjSumm.DataSource = dsPS
dgProjSumm.DataBind()
myConnection.Close()
</script>
<asp:datagrid id="dgProjSumm" runat="server"
BorderWidth="0"
Cellpadding="4"
Cellspacing="0"
Width="100%"
Font-Names="Verdana,Arial,Helvetica; font-size: xx-small"
Font-Size="xx-small"
AutoGenerateColumns="false">
<columns>
<asp:TemplateColumn HeaderText="Project Summary" HeaderStyle-Font-Bold="true" >
<itemtemplate> <%# BgColor(DataBinder.Eval(Container.DataItem, "ProjStatus" ))%> </itemtemplate>
</asp:TemplateColumn>
<asp:TemplateColumn>
<itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
</asp:TemplateColumn>
</columns>
</asp:DataGrid>
Please help if you can Im havin real trouble here.
Cheers
I have a process that keeps check on the row counts of about 100 stored procedures. The input parameters and "certified" row counts for all of the stored procedures are stored in a database. The process runs every day and executes all of the stored procedures using the parameters from the database with syntax below. The row count returned is compared against the known "certified" row count. If the counts are different, we receive an email alerting us that something has changed with the data or the sp query.
(This code is dynamically generated for all 100 + stored procedures)
SELECT COUNT(*) FROM OPENQUERY(SQLSERVER,'EXEC 'usp_HR_My_Stored_Procedure @inputparam1="12345",@inputparam2="12345"')
This worked well until I upgraded from SQL Server 2008 R2 to SQL Server 2014. Evidently Microsoft fixed this for me. The error below is now received anytime we attempt to execute a stored procedure with dynamic SQL through OPENQUERY.
The metadata could not be determined because statement 'EXEC (@sql_str)' in procedure 'usp_HR_My_Stored_Procedure ' contains dynamic SQL. Consider using the WITH RESULT SETS clause to explicitly describe the result set.
The stored procedures that are monitored change frequently, so it isn't reasonable to create tables with fixed column structures for all for all of the stored procs.
I need to create a stored procedure for total count of the user's. If User from front end invites other user to use my tool, that user will be stored into a table name called "test",lets say it will be stored as"Invited 1 User(s)" or if he invites 2 users it will store into table as "Invited 2 User(s)."
But now we have changed the concept to get the ISID (name of the user) and now when ever the user invites from the front end, the user who have invited should stored in two tables "test" and " test1" table .
After we get the data into test and test1 table i need the total count of a particular user from both tables test and test1.
if i invite a user , the name of the user is getting stored in both test and test1 tables.Now i want to get the count of a user from both tables which should be 1,but its showing 2.
Reason: Why i am considering the count from 2 tables is because before we were not tracking the usernames and we were storing the count in single test table.,but now we are tracking user names and storing them in both tables(test and test1).
Here is my sample code:
I need to sum it up to get the total user's from both the table but I should get 1 instead of 2
SELECT
(select distinct COUNT(*) from dbo.test
where New_Values like '%invited%'
and Created_By= 'sam'
+
(select distinct count (*) from dbo.test1
where invited_by ='sam'
hi all,
I want to know that how can i write a stored procedure that takes an input param, i.e., a string and returns the count of the matching words between the input parameter and the value of a column in a table. e.g. I have a table Person with a column address. now my stored procedure matches and counts the number of words that are common between the address of the person and the input param string. I am looking forward for any help in this matter. I am using Sql server 2005.
SQL Server 2012 Standard SP 1.
Stored procedure A calls another stored procedure B. Rowcount is set properly in called procedure B, but does not seem to return it to calling procedure A. Otherwise the two stored procedures are working correctly. Here is the relevant code from the calling procedure A:
declare @NumBufferManagerRows int = 0;
exec persist.LoadBufferManager @StartTicks, @EndTicks, @TimeDiff, @NumBufferManagerRows;
print 'BufferManagerRows';
print @NumBufferManagerRows;
Print statement prints @NumBufferManagerRows as 0.
Here is the called stored procedure B:
CREATE PROCEDURE [persist].[LoadBufferManager]
-- Add the parameters for the stored procedure here
@StartTicks bigint,
@EndTicks bigint,
@TimeDiff decimal(9,2),
@NumRows int OUTPUT
[Code] ...
I am run a stored procedure using Execute SQL task in, I want to log information of number of record inserted update in my table. I want to enable SSIS logging after from where I get information number of record inserted update.
I am using SQL server 2008R2 standard edition.
Hello Everyone,
I have the following stored procedure:
set ANSI_NULLS OFF
set QUOTED_IDENTIFIER OFF
GO
ALTER PROCEDURE [dbo].[usp_MLSReport_LRR]
@UserId int,
@ReportGroupId int = null,
@BranchTranType varchar(50) = null,
@BranchDivision varchar(50) = null,
@BranchRegion varchar(50) = null,
@BranchNbr int = null,
@BranchSatId varchar(1) = null,
@BeginDate datetime,
@EndDate datetime
AS
-- DECLARE @UserId int,
-- @ReportGroupId int,
-- @BranchTranType varchar(50),
-- @BranchDivision varchar(50),
-- @BranchRegion varchar(50),
-- @BranchNbr int,
-- @BranchSatId varchar(1),
-- @BeginDate datetime,
-- @EndDate datetime
--
-- SET @UserId = 4602
-- --SET @ReportGroupId = 46
-- SET @BranchDivision = 'DENVER DIRECT'
-- SET @BeginDate = '4/27/05'
-- SET @EndDate = '9/30/05'
SET NOCOUNT ON
DECLARE @UseCTD int
SET @UseCTD = CASE WHEN @BranchTranType IS NULL
AND @BranchDivision IS NULL
AND @BranchRegion IS NULL
AND @BranchNbr IS NULL
AND @BranchSatId IS NULL THEN 1 ELSE 0 END
SELECT DISTINCT
L.ProviderId,
L.OriginalProviderId,
S.SourceCode,
SG.SourceGroupCode,
SGDescription=SG.Description,
RG.ReportGroupId ,
ReportGroupDesc=RG.Description ,
L.VendorId,
VEN.VendorName,
B2.BranchTranType,
B2.BranchDivision,
B2.BranchRegion,
B2.BranchName,
L.BranchNbr,
L.BranchSatId ,
Branch=CONVERT(varchar, L.BranchNbr) + L.BranchSatId,
LoNbr = ISNULL(L.LONbr, 9999),
LoName = ISNULL(LO.LOName, ' - NOT ASSIGNED -') ,
LoEmploymentStatus = LO.EmploymentStatus,
LeadCount = 1,
Completed = CASE WHEN L.RecCompleted = 'C' THEN 1 ELSE 0 END,
InCompleted = CASE WHEN L.RecCompleted = 'I' THEN 1 ELSE 0 END ,
NoContact = CASE WHEN LD.Disposition = 16 THEN 1 ELSE 0 END,
Contacted = CASE WHEN LD.Disposition <> 16 THEN 1 ELSE 0 END,
Pending = CASE WHEN LD.Disposition IS NULL THEN 1 ELSE 0 END,
NoSale = CASE WHEN LD.Disposition <> 1 THEN 1 ELSE 0 END,
Apps1003 = CASE WHEN LD.Disposition = 1 THEN 1 ELSE 0 END ,
AppraisalsOrdered = CASE WHEN ISNULL(T3._@8034, 0) = 0 THEN 0 ELSE 1 END,
ClosedApps= CASE WHEN (@UseCTD = 1 AND SMT2._H0770 IS NOT NULL) OR SMT._H0770 IS NOT NULL THEN 1 ELSE 0 END,
LoanVolume = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(T1._@2026, 0) ELSE ISNULL(T1._@2026, 0) END,
OrigLoanBalance = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(SMT2._H0360, 0) ELSE ISNULL(SMT._H0360, 0) END,
Revenue = CASE WHEN @UseCTD = 1 AND LD.CTDLoanNbr IS NOT NULL THEN ISNULL(SMT2.calc_TotalIncomeDollars, 0) ELSE ISNULL(SMT.calc_TotalIncomeDollars, 0) END,
MarketingCost = CASE WHEN L.VendorId IN (59, 60) THEN 0 ELSE ISNULL(S.Cost, 0) END,
CAM.LeadTypeId,
SMT.calc_TotalIncomeDollars,
SP.SubjectAddrState,
SP.SubjectSCF,
S.LeadFormLabel
FROM MLS..tbl_MLS_Leads L (NOLOCK)
INNER JOIN MLS..tbl_MLS_LeadDispositions LD (NOLOCK) ON (LD.ProviderId = L.ProviderId)
INNER JOIN MLS..tbl_MLS_Branches B1 (NOLOCK) ON (B1.BranchNbr = L.BranchNbr AND B1.BranchSatId = L.BranchSatId)
INNER JOIN MLS..vw_MLS_AUCodeSecurity AU (NOLOCK) ON (B1.AUCode = AU.AUCode AND AU.UserId = @UserId)
INNER JOIN CHEC..SMT_Branches B2 (NOLOCK) ON (B1.BranchNbr = B2.BranchNbr)
INNER JOIN MLS..tbl_MLS_SubjectProperties SP (NOLOCK) ON (SP.ProviderId = L.ProviderId)
LEFT JOIN CHEC..TMRPT100 T1 (NOLOCK) ON (T1._@LOAN# = LD.TMOLoanNbr)
LEFT JOIN CHEC..TMRPT300 T3 ON (T1._@LOAN# = T3.R3LOAN)
LEFT JOIN CHEC..SMT3 SMT (NOLOCK) ON (SMT._H0010 = LD.TMOLoanNbr)
LEFT JOIN CHEC..SMT3 SMT2 (NOLOCK) ON (SMT2._H0010 = LD.CTDLoanNbr)
LEFT JOIN CHEC..SRVDSR SRV (NOLOCK) ON (SMT._H0010 = SRV._LOAN_NUM)
LEFT JOIN CHEC..SRVDSR SRV2 (NOLOCK) ON (SMT._H0010 = SRV2._LOAN_NUM)
LEFT JOIN MLS..tbl_MLS_MarketingSources S (NOLOCK) ON (S.SourceId = L.SourceId)
LEFT JOIN tbl_MLS_MarketingSourceGroups SG (NOLOCK) ON (S.SourceGroupId = SG.SourceGroupId)
LEFT JOIN tbl_MLS_ReportGroups RG (NOLOCK) ON (RG.ReportGroupID = SG.ReportGroupID)
LEFT JOIN (
SELECT
LONbr,
LOName = FullName,
EmploymentStatus,
ReHireDate,
HireDate,
TermDate
FROM MLS..vw_MLS_UsersWithLONbrs (NOLOCK)
) LO ON (LO.LONbr = L.LONbr)
LEFT JOIN MLS..tbl_MLS_Campaigns CAM (NOLOCK) ON (CAM.CampaignId = SG.CampaignId)
LEFT JOIN MLS..tbl_MLS_Vendors VEN (NOLOCK) ON (VEN.VendorId = L.VendorId)
WHERE L.DateReceived BETWEEN @BeginDate AND @EndDate + ' 23:59:59'
AND (CASE WHEN @ReportGroupId IS NULL THEN 1 WHEN @ReportGroupId = RG.ReportGroupId THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchTranType IS NULL THEN 1 WHEN @BranchTranType = B2.BranchTranType THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchDivision IS NULL THEN 1 WHEN @BranchDivision = B2.BranchDivision THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchRegion IS NULL THEN 1 WHEN @BranchRegion = B2.BranchRegion THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchNbr IS NULL THEN 1 WHEN @BranchNbr = L.BranchNbr THEN 1 ELSE 0 END) = 1
AND (CASE WHEN @BranchSatId IS NULL THEN 1 WHEN @BranchSatId = L.BranchSatId THEN 1 ELSE 0 END) = 1
AND L.ProviderId = L.OriginalProviderId
AND L.VendorId NOT IN (59, 60, 131) -- Exclude Turndown or Ghost leads
AND L.Deleted = 0
I need to add the field DateReceived from the following view:
dbo.vw_MLS_Leads
How should I code this?
As always thanks for the great answers and suggestions in advance.
Have a great day!
Kurt
Hello,I have a stored procedure: -- Get an individual league match by IDALTER PROCEDURE [dbo].[mb_League_GetLeagueMatchByID]( @LeagueMatchID int)ASSET NOCOUNT ONSELECT * FROM mb_LeagueMatch WHERE mb_LeagueMatch.LeagueMatchID = @LeagueMatchIDThe mb_LeagueMatch table has a column named IsActive that is a bit datatype.The value for all rows is set to true (in database explorer in visual studio 2005).When I execute the above stored procedure I always get -1 (I'm guessing that means null) as a result for IsActive if it was true and 0 when false (as expected).However, when I run a query on the database for the same parameter, I get the expected 1 as the value for IsActive.Has anyone seen this before?Thanks,Howard
View 4 Replies View RelatedI need to update a field with the code below, is it possible to do this with a table join? The Query Analyzer is giving me an error at "Join".
An example:
(ManufSerNo is a field in table ASSETS,
Status is a field in table HISTORY)
GO
CREATE PROCEDURE sp_ChngeAssetStatus
@ManufSerNochar(10),
@Statusvarchar(1)
AS
UPDATE HISTORY
SET Status = @Status
JOIN ASSETS
ON HISTORY.AssetID = ASSETS.AssetID
WHERE ManufSerNo = @ManufSerNo
--ELSE
--RAISERROR ('Sorry, but the Asset ID specified does not exist. Record not updated.', 10 , 1)
GO
I am writing a utility that creates Java code to access a database. I am looking for a way to get a list of fields and types that are returned by an sproc. Is there any easy way to get this from the master? Do you need to parse the SQL? This list would be like what Visual Studio.NET shows, or interdev if I remember correctly.
Thanks,
Larry
I am very new to stored procedures and fairly new to SQL in general. I have a stored procedure that looks like this:
CREATE PROCEDURE sp_UpdateProductsTable
@prodName varchar(50),
@prodManufacturer varchar(50),
@prodShortDescrip text,
@prodLongDescrip text,
@prodCatId int,
@prodPrice varchar(6),
@prodSortOrder int,
@prodActive int,
@prodId int
AS
if( @prodId <> 0 )
begin
update Products set
Name = @prodName,
Manufacturer = @prodManufacturer,
ShortDescription = @prodShortDescrip,
LongDescription = @prodLongDescrip,
CategoryID = @prodCatId,
Price = @prodPrice,
SortOrder = @prodSortOrder,
Active = @prodActive
where ID = @prodId;
select ID as prodId from Products where ID = @prodId
end
if( @prodId = 0 )
begin
insert into Products ( Name, Manufacturer, ShortDescription, LongDescription, Price, CategoryID, SortOrder, Active )
values( @prodName, @prodManufacturer, @prodShortDescrip, @prodLongDescrip, @prodPrice, @prodCatId, @prodSortOrder, @prodActive );
SELECT SCOPE_IDENTITY() AS prodId
end
GO
I have recently added two new fields to the database that I need the stored procedure to act upon, but adding them into the above code does not work. I read somewhere that this would happen with new fields, but I do not know how to fix this issue. Could someone point me in the right direction and help me out? I also have some other tables and SP's that I need to update, but its the same issue, I think so fixing this one should help me out across the board.
Thanks in advance for your help.
I have this stored procedure that loops through a table and updates acouple of fields. For some reason one of the fields is not beingupdated. If I run the same code from query analyzer, it works fine.Let me know if anyone can figure out why @lastscandate would ever beNULL. If it is null it should be equal to @maildate. The senerio thatseems to fail is when no records are returned from the select statementto fill in @lastscandate. This should then active the next ifstatement and set the @lastscandate equal to the @maildate. MailDateis always filled in in the database and LastScanDate will be NULL.Thanks for your help.DECLARE c1 CURSOR LOCAL FORSELECT m.id, m.acctno, m.ordid, m.cycle FROM master m WITH (nolock)WHERE m.printstatus IN ('ST', 'ML') AND (m.batchid IS NULL OR m.batchid= 0) AND (m.maildate ='' OR m.maildate IS NULL)AND NOT EXISTS(SELECT * FROM packagemaster p WITH (nolock)WHERE m.acctno = p.acctno AND m.ordid = p.ordid AND m.cycle = p.cycleAND p.status NOT IN ('BM', 'PM'))OPEN c1FETCH FROM c1 INTO @mid, @acctno, @ordid, @cycleWHILE @@fetch_status = 0BEGIN--Get MailDate from Manifest - if NULL then use GetDateset @maildate = NULLSELECT @maildate = MAX(whenmailed) FROM manifest WITH (nolock)WHERE acctno = @acctno AND ordid = @ordid AND cycle = @cycleif @maildate is NULLset @maildate = getdate()--Get Last Scan Date from Transactions - if NULL then use MailDateset @lastscandate = NULLselect @lastscandate=max(actiondate) from transactions whereacctno=@acctno and ordid=@ordid and cycle=@cycle and actionid=303if @lastscandate is NULLset @lastscandate = @maildateBEGIN TRANSACTIONUPDATE master SET printstatus = 'ML', maildate = @maildate,lastscandate=@lastscandateWHERE id = @midINSERT INTO transactions (initials, actionid, machinelogin, acctno,ordid, cycle, program) VALUES ('RLT', 55, 'Mars', @acctno, @ordid,@cycle, 'Update Mail Dates')COMMIT TRANSACTIONFETCH NEXT FROM c1 INTO @mid, @acctno, @ordid, @cycleENDCLOSE c1
View 1 Replies View RelatedI am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
How can I format a datetime field in a stored procedure to return just the date in MM/DD/YYYY format?
View 13 Replies View RelatedHello,
I am looking at writing a SP without much success which enables multiple filtering on one field. Something like below:
Input field: Product Description
So if the user enters: "Large Drill" OR "Drill Large" the same resultset will be returned.
SELECT * FROM products WHERE products.prod_desc contains both "Large" AND "Drill"
I guess there'll need to be a nested Select and loop to parse the space separated input field.
Any pointers would be appreciated.
Thank you
Lee
Is there a way to add a field or a stored procedure to a server running MSDE? Like a script on the command line or?? how can this be done.
Thank you,
Here's the deal:
I import a flat file from a legacy system, and then convert it into a single table. That works simply enough.
Then I have a SP that querys that table using a parameter for an accountID. My business tier calls that SP and returns the results to the calling tier (my web application). Easy enough...
Now for the question. The people who created the flat file (written in COBOL) decided to use "codes" to represent data. So, for instance, if I'm looking for the account plan, I can expect to see characters like ], or [, or +, etc... These characters have a special meaning, like:
] = Plan A
[ = Plan B
+ = Plan C, and so on.
Currently, the web application displays those characters, but I want it to display the actual plan name. Is there a way that when I execute the SP, the SP could pull the necessary records, and whenever it encounters a certain "plan" character, it could convert it into a "readable" name? Say that it sees that the plan_type field has a value of "]" for twenty records, so it converts those twenty records' plan_type value from "]" into "Plan A"? I'm not sure if I can do that, but I want to at least evaluate the option if I can.
I've evaluated other options, like using a CASE statement in my code, but I shot that down quickly...for obvious reasons. I don't wanna be changing my web application or business tier each time these guys update a plan name, or add a new one, delete an existing one, etc...
I've also thought about creating a dictionary table than contains the plan's code and its name, and then just INNER JOIN the first table with the dict table. This would keep my SP very simple (it's very straight-forward right now, and I like that). That way, if a plan name is ever changed, or a new one is added, I simply update the dict table using a simple query. However, if my SP is doing the conversion, I could just as easily update the SP.
Either of these methods would work for me, and I *do* know how to do the latter (dict table). However, there are quite a few other fields that I may have to do this for. I believe when I left for the day on Friday, my last count was 14 fields total that needed translation. That would mean 14 different dict tables! That could certainly affect my SP performance with all those INNER JOINS!
Therefore, I'm certainly interested in figuring out if it's possible to do the former method (SP), and then I shall decide which method is best for my situation.
Feel free to include your thoughts on which process you think is better as well. I'm really riding the fence with this one. However, if I can't find out how to change field values in my SP, then obviously I'll make a decision very quickly...
Thanks in advance.
I want to sort a stored procedure based on a variable passed to it... what is the easiest way to do this? Here's an example of what I want to do:
sp_select_thing 10, 'thing_name', 'asc'
It would run the query then somehow evaluate parameters 2 and 3 to be placed in the ORDER BY clause. I'm not sure if they should be quoted as strings or not, I don't have an idea how to pass a "reference to a variable" as a parameter to a stored procedure... or even if such a thing is possible
Thanks!
I need to write a sp to fill a date field, if another field in another table is true. need the date to reflect todays date(the date the field was marked true). I know this is an easy one but I am over thinking it. please help.
View 2 Replies View Related