TO all
I have tabel
autonumber value
11
25
36
48
59
610
712
813
98
1010
and if i want sum with increment 2
autonumber value
1 - 2 1 + 5 = 6
3 - 4 6 + 8 = 14
5 - 6 19
7 - 8 25
9 - 10 18
please help.............. trims
Hello,
I Have a table that needs to have 2 unique number.
detail_id and detail_print_id.
detail_id is already an IDENTITY.
both fields need to be different, because when importing, it imports the same data into a table twice, with only a slight data change (and id is not one of the changes).
So I thought i could do the following:
detail_id INT NOT NULL IDENTITY(1,2),
detail_print_id INT NOT NULL IDENTITY(2,2),
--blah blah
that way, the detail_id will always be odd, and the detail_print_id will always be even. however SQL Server 2005 only allows 1 identity per table, and both these fields need to be auto generated when the field is inserted, so as to prevent double data.
is there anyway I can create a int column to auto increment, without the column being an IDENTITY??
also, I would prefer to not have to create a second table with a single column just for this work.
Thanks,
Justin
i have got 22,000 rows in a table, i want to update the records to have to start id of 70000 which increments to 70001, 70002 ? how would i go about doing this ?
View 3 Replies View RelatedIs there an easy and fast way to increment a value by 1 in a database? For example if a value is 106 I will need to make it 107. Is there a fast way to do this?
View 9 Replies View RelatedIf there is one field such as Seq No in a table and if we entered some data ..
and if we update one record of Seq No then the below records of Seq No should be incremented in that table
for example there are 10 seq no's and if i had updated the seq no 4 to 5 then the
5 shuld b inc 6 and 6 to 7 etc............
at preasent i wrote only
update in sp of that particular record:
like this
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UpdateSelected]
(
@Description NVARCHAR(30),
@SequenceNo int
)
AS
UPDATE Sequence SET
Description = @Description,
SequenceNo = @SequenceNo
WHERE
SectionID = @SectionID
but now i need additional functionaly like inc the remaining sq no above that given no...
Regards,
Anushka
1. I have a table lets say ABC in which the datatype of one of the column lets say MNO is int identity.
3. Inserted some records into this table using SSIS. the values in the column MNO are from 1 till 20
2. i want insert more records into this table ABC using SQL task in SSIS
How do i do this. can any body help me out.
Thanks in advance
1. I have a table lets say ABC in which the datatype of one of the column lets say MNO is int identity.
3. Inserted some records into this table . the values in the column MNO are from 1 till 20
2. i want insert more records into this table ABC
How do i do this. can any body help me out.
Thanks in advance
I have a table with an automatic count int. What I want to know is there an sql statement to return the next increment from the sequence. Any help would be appreciated.
View 4 Replies View RelatedHi,
This is my first SSIS query. I have just started with ssis and have the following task
I am looping text files in a folder using foreach. I transfer text file data to sql server. I want to count the total rows are that transferred in all the text files after the foreach loop finishes. I user RowCount but it gives count of only current textfile. It gets reset each time the loop iterates. I want something like @count = @count + currentnoofrows in current text file.
lalit.
I'm using SQL Server 2000 with MS Management Studio. I have a table that has 400 rows. I have setup the Primary key to increment automatically. How do I setup so that the next record starts at 4001 and up? Right now it starts at 1274, for example. So besides dropping the table and re-creating it, how do reset it so it counts from sequentially from the last row inserted?
View 5 Replies View RelatedHow can you increment row by row through a table using a stored procedure?
I am trying this but getting error on SET statement - Line 6: Incorrect syntax near '.'.
PROCEDURE asuodem.spA_LinkSpinner ASWHILE (tblLinkInfo_OLD2.L_ID IS NOT NULL)BEGINIF (tblLinkInfo_OLD2.L_Rank > 10) AND (tblLinkInfo_OLD2.L_Rank < 300)SET tblLinkInfo_OLD2.L_Rank = Convert(int, (250-25+1)*RAND())ELSE CONTINUEENDRETURN
DIAGID is the
field in database which is integer. i want to increment this when page is
loaded.but it is not working..
plz
find mistake ... thanks in advance
SqlCommand sqlCmd = new SqlCommand("Select max(DIAGID) from tblDxactual",
sqlCon);
SqlDataReader sqlDr;
sqlCon.Open();
sqlDr = sqlCmd.ExecuteReader();
if (sqlDr.Read())
{
txtbxDiagID.Text = sqlDr[0].ToString()+ "1"
;
}
else
txtbxDiagID.Text="1";
sqlCon.Close();
It's been a long time since I've had to check an index for the highest value, then add 1, to create a new unique key. These past few years, it seems this is usually done for you. But now that I'm working with MS-SQL, I don't see it. Is it there? It's doesn't seem to be inherent in the definition.
View 5 Replies View RelatedHello,
Firstly Hello to everyone I'm new the forum and fairly new to .net
I'm working on web datbase application using visual studios 05 and MS SQL05 I've used 2003 (briefly) before but 2005 is very new to me.
To my problem I download the GUI interface from microsoft so I can now setup a local database and do my own testing.
I have created the table and fields with in it however on a particular table i have made a primary Key and left it as an INT but I would like to set it as auto increment ! I dont know how to select that option as i was used to mysql way of doing things or does this have to be done as a stored procedure ?
Any assistance much appreciated.
I am very new to using SQL server 7. I've always used mysql in the past. I cant figure out howto create a autoincrementing key for my tables... is it possible to do in SQL7?? If so.. how.. i thought you just set the datatype to auto increment etc...
sorry for any oversights...
dave
Hello!
I is true that SQL-Server use lower values than last integer value (in auto incremet field). Is there option that i could prevent that. So the Server would always put + 1 for the auto increment value.
Thanks
Juissi
I would like to avoid using a cursor. I am updating several rows in a table with sequential numbers starting at a number I pass into the Stored Procedure. Is there a way to do this with one update statement?
Thanks,
Ken Nicholson
Sara Lee Corporation
Hey,
Here is what happened:
Users for a long time have been able to post new topics in our forums. However, a short time ago, the some users began to experience problems. What I have narrowed it down to is that upon inserting into the table, sometimes id value for the topic is the same as an id that is already in the table, so it fails to insert the record (due to a constraint). However, the topic id column is an auto-increment column and should just assign the next number for the id value.
Any ideas?
If delete all the records from a table that has an incremental identity. Is there a TSQL way of reset the first number on an insert back to be 1 again without going to the table taking it off then saving it the putting it back on again?
View 2 Replies View RelatedI have the following table:
Code:
CREATE TABLE [dbo].[apcName](
[SysID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[RIN] [int] NOT NULL,
[Name] [varchar](80) NOT NULL,
[DimTab] [tinyint] NOT NULL,
[code]....
If I have an Insert trigger to set the RIN field to the next available number in the sequence of the RIN column, why does the following work for inserting 1 and only 1 record at a time but fails if doing multiple rows with a single insert?
Code:
-- Insert Trigger
UPDATE xRec
SET RIN = (Select MAX(RIN) + 1 from apcName)
FROM apcName xRec
JOIN inserted ins
ON ins.sysID = xRec.sysID
-- Works, RIN is populated correctly
Code:
Insert apcName (Name, DimTab) VALUES ('Test Name', 1)
Does Not Work. Returns 1 for all RIN's
Code:
Insert apcName (Name, DimTab) VALUES
('Test Name1', 1),
('Test Name2', 2)
I have important a table from mircosoft access into ms sql server 2000, I've created a new ID row and set the primary key - but I need to use the ID from microsoft access as well. therefore I'd like to add an auto increment +1 on the old access ID field... but how do I do that?
View 1 Replies View Relatedhi, i have columns(name,id,salary) in my emp table,see to that there is no primary key in my table, but i want to do auto increment, in my table id has to be auto incremented,so please give me coding to do that,pleaseeeeeeee
View 3 Replies View Relatedi want to write a SQL statement to increment the salary by 10% for technicians who have done three tests on a particular date.
there are two employee types.(1)technicians (2)traffic controllers.
employee category is defined in "Type" attribute of Employee table. the increment should happen only to technicians.thank you in advance.
Employee (EmployeeID,Name,Salary,Tpye)
TestEmployee(TestNo,EmployeeID,Hrs)
Test(TestNo,TestDate,Result)
Hi. I am new in sql and i need help for increment rows. This is my script
I worked in ms sql 2000
SELECT cool.Podchl,cool.Datumchl, cool.Textchl, cool.Timechl,
cast ((substring(cool.Datumchl,7,4)) as int ) as year,
cast ((substring(cool.Datumchl,4,2)) as int ) as month,
cast ((substring(cool.Datumchl,1,2)) as int ) as day,
cast ((substring(cool.Datumchl,13,2)) as int ) as hour,
cast ((substring(cool.Datumchl,16,2)) as int ) as min
FROM zih2.dbo.cool cool
WHERE (cool.Timechl<>'00')
ORDER BY year,month,day,hour,min
I need add new colum, where first colum will be order. I made it but after execute order by I have got 2,3,4,1,5... and i need 1,2,3,4,5,...
Hi,
How do I increment the value of a variable? let's say from initial value of var1 = 0 it becomes 1
Thanks!
cherriesh
Hi,
I have one table:
Appid | Cols
1 | xx
2
3
In this table Appid is the primary key. I want to change the Appid column as Auto increment column. How to change the appid to Auto increment with data in that column. Is it possible?
Thanks in advance
Hi.
Am creating a database in SQL and one of the field of my table is customer_id. I want this customer_id to be auto generated and auto increment. I was reading about Identity but it was too complicated to grasp. So how can that be done in a very simple way.
Thanks
Hey guys,
I am doing a project that has start time and end time. i was given only the start time of cases, but not the end time.
for example:
start time
01:30:00
10:00:00
09:24:00
11:25:00
.
.
.
.
It was like, thousands of start time. I need to create an end time (smalldatetime) which is one hour passed the start time. can anyone tell me how to do it in sql query? thanks.
Jul
Hello, I need some help writing a script to generate Identity keys. I cannot use the row number generator because I would like to start the identity at a package level variable. Is this possible?
Thank you in advance
Hi
please how to create an increment into a sql server column? (count=count+1 into sql query)
NameA 1
NameB 2
NameC 3 etc
Thanks a lot
Howdy team,
How would I increment a field of type 'int' with a stored proceedure with sql2005
Thanks.
Is there a way to make the primary ID as Identity Column to always be in order? For example, I have 5 rows with ID 1,2,3,4,5. If I delete record number 5 and then added another record, the ID shows up as 6 and not 5. Or if I delete record number 3, the next ID is going to be 6 instead of 3. I like to keep all my ID in order if possible and not skipping if that is even possible or should I use that practice.
View 9 Replies View RelatedHow do I make a Primary Key in a table automatically increment as a new row of data is entered? do i have to do it with a trigger?? if so what is the code behind it....what I have is a Applicant table, which holds the ApplicantID (<<<needs auto incremented), FirstName, LastName, Address, City, State, Zip, and PhoneNumber. I enter all the other information through visual web developer, and what I need to do when the hit submit on the form with the data i want to automatically set an id right there. any suggestions will help!
View 3 Replies View Related