Suspended Status
Sep 25, 2007
Hi All,
Using SQL Server 2005 w/ SP2 I have a simple select query with a parameterized WHERE clause that in Management Studio runs nearly instantly, everytime. Using the same login, when I run the same query using SQL RS the results (only 6 rows) takes upwards of 5 minutes. If I look at the Activity Monitor, it shows the process as suspended and indicates a CXPACKET. Everything I have read on the forums about this indicate it is an issue with not having SP2 , which I do. Or a 64 bit version, I have 32. Or for large bulk updates, I am doing a very simple select. Does anyone have any clue on this?
regards
Bill
View 3 Replies
ADVERTISEMENT
Aug 13, 2007
Hello,
On my sql server 2005 when I run sp_who, I often see process in suspended status. These process block
my sql server so its utilization is low.
Is there any way to kill suspended process automatically, or can I set any timeoutfor these process?
View 4 Replies
View Related
Mar 4, 2015
I was running a stored procedure it was suspended for about 11 hours so I decided to kill it now its in Killed/Rollback stage for 12 hours and when check the status of roll back it says "Estimated rollback completion: 0%. Estimated time remaining: 0 seconds." its using up CPUTIME 380000 and DiskIO 970000. How to do I stop this co.mpletely
View 4 Replies
View Related
Jan 22, 2001
Is anyone aware of how to start a scheduled job once it has been marked as "suspended"? (SQL Server 7)
Thanks Brian
View 2 Replies
View Related
Apr 1, 2008
Hi All
When i see the result of Sp_who2, i see the status of a process as
"SUSPENDED" for some of the processes like logwriter, checkpoint etc.
and also found the same status for "IF @@TRANCOUNT>0 COMMIT TRAN"
Please let me know what does it mean in the context of SQL 2005
Thanks in advance.
View 8 Replies
View Related
Mar 2, 2007
Hi,
I have a database shown a SUSPENDED mode on both side of Principal and Mirror server. What should I do now?
1). Is the breaking the Mirror sesssion my only choice?
2). If I break it, how do I reestablish the Mirror again quickly. What is my potential data loss?
Thanks,
View 1 Replies
View Related
Mar 10, 2007
Hi,
I am having a problem with one package that attempts to do a join on two large tables. Within the data flow task control is the ole db source control which has the initial query that joins and filters the tables.
The total number of rows that should be returned are about 80-90million. Running this in debug mode shows the number of rows read/inserted into the ole db destination and it always hits the about the same number of records where it just stops/stalls/suspends around 75 million. I have read some possible solutions such as changing the max degrees of parrallelism but that has not worked.
I am currently using SQL Server 2005 64bit SP2 on a 64 bit platform. This is the only package that does anything like this and I am at my wit's end with this problem.
Please help!
Thanks,
Cheston
View 7 Replies
View Related
Mar 7, 2007
I'm trying to find a solution to for a report i am building and was hoping that some of you will share your expertise with me. Basically, I need to work out how long an Incident Ticket was suspended (ie it's status is "on hold").
The data is stored something similar to the following...
Ticket Date Status
------ ---- ------
333 14/03/2005 10:24:19 "to on hold"
333 14/03/2005 15:23:01 "from on hold"
334 14/03/2005 11:14:11 "to on hold"
334 14/03/2005 16:26:15 "from on hold"
335 15/03/2005 10:10:15 "to on hold"
335 15/03/2005 11:15:35 "from on hold"
335 15/03/2005 13:26:10 "to on hold"
335 15/03/2005 14:30:59 "from on hold"
335 16/03/2005 14:00:05 "to on hold"
335 16/03/2005 16:45:15 "from on hold"
336 16/03/2005 10:10:15 "to on hold"
336 16/03/2005 12:45:12 "from on hold"
This is the result i'd like to see....
Ticket Start Hold End Hold Time Suspended
------ ---------- -------- --------------
333 14/03/2005 10:24:19 14/03/2005 15:23:01 datediff(...
334 14/03/2005 11:14:11 14/03/2005 16:26:15 datediff(...
335 15/03/2005 10:10:15 15/03/2005 11:15:35 datediff(...
335 15/03/2005 13:26:10 15/03/2005 14:30:59 datediff(...
335 16/03/2005 14:00:05 16/03/2005 16:45:15 datediff(...
336 16/03/2005 10:10:15 16/03/2005 12:45:12 datediff(...
Has anybody done something along the same lines? If so, could you point me in the right direction?
Thanks in anticipation
Jon
View 6 Replies
View Related
Dec 4, 2007
Hello. We recently ran into extremely large transaction log sizes on our SQL 2005 box...turns out they were not being backed up. After doing some research, I found that they should be backed up very frequently in order to kee their sizes down. I kind of inherited the mess, but got three maintenance plans set up:
FULL Backup that runs weekly
DIFFERNTIAL Backup that runs nightly
TRANSACTION LOG backup that runs hourly
However, since I implemented the plans there has been high CPU utilization at all times. I finally figured out what was causing it today...the BACKUP LOG process is hanging in "Suspended" mode when I view processes. I have to manually kill them to release the CPU utilization.
How can I trace the cause of the hang? Is there a better way to backup/truncate the log files?
Regards,
Matthew
View 2 Replies
View Related
Aug 10, 2015
I have checked my Production databases, both are went to Disconnected state, both are unable to connect to the application, i checked all the services and its working fine. and restarted the end points on Principal and Mirror, still issue not solved, after restart the witness server End point both the databases are working fine.
View 3 Replies
View Related
Feb 23, 2007
SP2 refuses to install for the Database Engine because €œthe previous upgrade did not complete€?, i.e. it detects a suspended installation. The same thing happened to me when I installed SP1. I then remember opening the maintenance dialog and completing the setup, after which SP1 installed just fine.
When I try to do the same thing this time, I€™m presented with the €?complete the suspended installation€? option, which when I run it reports the installation completed successfully. However, in reality the installation still remains in suspended mode for whatever reason. If I reboot and open the maintenance dialog, I€™m still presented with the €?complete the suspended installation€? option. I€™ve even tried to run it more than once, but it doesn€™t help. Needless to say, SP2 still refuses to install.
I don't know why the installation is in a suspended state. I know every part of SP1 installed successfully in the end, and the computer never crashed during the installation. I've been using it every day since then, without any problems. All other parts of SP2 did install successfully.
I created a feedback entry on Microsoft Connect, where you can find the log files created by Windows Installer. The URL is:
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=259606
Any ideas what I can do to resolve this problem?
View 1 Replies
View Related
Feb 18, 2015
SQL Server 2008 r2 - 6 GB memory...I attempted a backup on a 500GB database but it was taking way too long. I checked the resources on the box and saw the CPU at 100%. I checked the SQL Server activity log and saw a hung query (user was not even logged on) that had multiple threads so I killed it and now the CPU utilization is back to normal.
Trouble is, now all of the threads in the activity monitor for the backup show 'suspended' and the backup appears to be not doing anything.
View 3 Replies
View Related
Mar 15, 2007
If I create an adhoc db backup that takes, say 30 miuntes to complete, should I suspend the tran log backups that run every 10 minutes, until the full backup is complete?
Drew
View 9 Replies
View Related
Jan 7, 2008
Hi Experts,
I am extracting data from SQL Server 2005 to flat file destination. I am using SQL Command to specify the data selection query. One of my query uses Replicate function to derive a column value. When I execute this package it fails with the error "Data conversion failed. The data conversion for column "value" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page".
The reason for the problem is that, it is taking the InputColumnWidth of the flat file destination as 8000 and I specified the OutputColumnWidth as 4.
If I change the OutputColumnWidth to 8000, it is working without any error but resulting in the column width of 8000.
I tried using DerivedColumn Transformation's Type cast and DataConversion Transformation but still I am getting the same error in the respective Transformation components.
Can anyone suggest how to solve this issue.
View 11 Replies
View Related
May 3, 2005
Returning "completed" when status = 1 and "not completed when status = 0
View 3 Replies
View Related
Aug 28, 2002
SQL7, sp3, NT4...
Unless I grant a developer "system admin" role, they are unable to see whether or not any job *not* owned by themselves is running?
EX: Developer A can't see whether Developer B's job is executing? Why? I've granted them both db_owner in msdb, and all permissions possible in msdb. Is there an extended sp I can look for?
Thanks,
View 1 Replies
View Related
Mar 4, 2004
Hi Gurus,
can any one help me to get the job status of a sql job.
My requirement is as under
ordinary user (not SA) will query pass job name as argument to stored procedure and sp has to give me the job status.
Thanks in advance
View 1 Replies
View Related
Jul 23, 2005
I have a table with columns c1, c2, c3, c4.if all nulls or blanks. Status = 0if c1 assigned but no c2, c3, and c4, then status = 1if c2 assigned but no c3 and c4, then status = 2if c3 .. then ..if c4 .. then ..I want to have one SQL to get the status like (ignored checking forblanks here for demo)SELECT Status = (if not c4 is null then 4else not c3 is null then 3else not c2 is null then 2else not c1 is null then 1else 0)FROM mytable.Thought of using CASE ... WHEN ... but it is only on one colum.Any better idea.ThanksJohn
View 1 Replies
View Related
Sep 25, 2006
In SQL 2000, go to Management, than Jobs, you will see a list of all jobs and their running status. I would like to programmatically display the same on my web page. I can call sysjobs table to get the jobs and use sysjobschedules to determine whether it's been scheduled or not. Then use sysjobhistory to obtain their running history. But how and where do I get the Next Run Date information? Is this calculated or stored somewhere?Can anyone give me some help on how to work with sysjobs, sysjobschedules, and sysjobhistory tables? All I am trying to do is to build a web-based app that does the same thing as the Enterprise Manager is doing - create and schedule a job, and monitor the job status.Thanks a lot!Penn
View 1 Replies
View Related
Sep 1, 2007
Hi all - am having trouble working out what would be the best way to do this (most efficient)I have written an order, despatch and accounts system. To get a list of orders ready for despatch, I have written a query which calculates the amount of items ordered against the amount of items despatched from that order. If there are any outstanding items, then this order is in the list of orders which are outstanding for despatch.
I am having trouble working out how to go about creating a list of orders ready do be invoiced... Orders that are ready to be invoiced can be completely despatched orders or part despatched orders. That is to say that if an order is only half despatched, my client still wants to be able to raise an invoice against that part of the order. I envisage creating a query which checks my orderline table to see if the item has been invoiced and creating the list from there. But as the application is used more and more, this query will take longer to run? ANy ideas?
Thanks.
Steve.
View 1 Replies
View Related
Jul 9, 2001
Hello,
Can anyone guide me to monitor whether Production Sql server is up and running and would e-mail or page me if by chance it has stopped.
Any help is appreciated.
Thanks.
Priti
View 5 Replies
View Related
Jun 24, 2000
is there any way to make the status of a package execution to be success without caring about failure of certain steps in the package?
View 1 Replies
View Related
Sep 26, 2002
I need to know the meaning of the status bit in sysdatabases because BOL only reports some of them.
For SQL 7.0 SP1 I have some database with a status bit equal to 0 (zero) and equal to 12.
For SQL 2000 SP2 I have some database with a status bit equal to 0 (zero),24,20 and 1073741840.
So I would really appreciate if someone can explain the meaning of these status bits.
Thank you very much.
Franco
View 2 Replies
View Related
Apr 14, 2003
Hi,
Is there any way to update the status bar in Query Analyzer.
Suppose I am running a script which updates data to a file. I want to know the status showing the percentage it completed.
Thanks
:confused:
View 1 Replies
View Related
Jun 8, 2007
I just started working with MS SQL. I'm attempting to find the equivalent of the MySQL commands STATUS and SHOW STATUS.
Essentially, I want to connect to the database from a .net app, check the status, such as how many connections, table locks, errors, etc... and display that information on my application.
Any recommendations?
View 5 Replies
View Related
Jun 27, 2004
I have a question I hope someone can help me with.
My situation:
I have a single-step job in SQL Server, which runs a stored procedure, A. This stored procedure invokes another stored procedure, B. In B, one of the statements is a 'BACKUP DATABASE' command, and a database is backed up to a file.
The job is started by an application. Once started, the application then uses the SQL-DMO property CurrentRunStatus to periodically check the status of the job. When the property returns the value SQLDMOJobExecution_Idle (indicating the job has completed), the application code then continues processing, and attempts to access the .dat file produced by the 'BACKUP DATABASE' command.
My problem:
On occasion, the application will hit the problem where either the backup file cannot be located, or the file is still being locked by another process (Error=The process cannot access the file because it is being used by another process).
Is anyone able to shed some light on this?
I assume that the job will only return a completed status after:
(a) both A and B have completed execution, and
(b) the BACKUP operation has completed
Is it possible that even though SQL Server indicates the job has finished, that the BACKUP operation still hasn't completely ended?
Thanks for any help,
Andrew
View 2 Replies
View Related
Mar 27, 2008
Hi
My boss and I have recently started designing a new database, and we've got into a bit of a debate about creating status tables (e.g. order statuses).
It was my intial instinct to create a separate table for each kind of status (e.g. an OrderStatuses table, a JobStatuses table, etc), however my boss wanted to create one table containing all the statuses, with an extra field for defining what kind of status it is.
I was just wondering what others thought was the best approach.
Thanks
Tom
View 5 Replies
View Related
Jun 3, 2008
Hi Gurus,
While iam connecting to servers through management studio iam facing
iam seeing like few servers are connected with Green colour (like>)and few are connected with circle as white.Frm these how can i decide the server status.
Is there any comand to view server status ?
Thanks,
ServerTeam
View 3 Replies
View Related
Jun 5, 2008
Hello All,
Can someone help me with this query?
I have the following table and data structure
Table1: Orders
Field1: OrderID
Table2: OrderStatus
Field1: OrderStatusID
FIeld2: OrderID
Field3: StatusID
Field4: InsertDate
Sample Data:
Table1:
11
12
Table2:
1,11,1,6/1/2008
2,12,1,6/1/2008
3,11,2,6/2/2008
4,12,2,6/2/2008
5,11,3,6/3/2008
6,11,4,6/4/2008
Wanted Results:
11,4,6/4/2008
12,2,6/2/2008
View 3 Replies
View Related
Jul 16, 2013
How can i exclude those with more than one status? i tried using rows but it seems doesn't work.
ID status
1 new
1 new
1 close
2 new
2 close
3 close
3 close
4 new
4 close
the result should appear as:
ID status
2 new
2 close
4 new
4 close
View 4 Replies
View Related
Mar 7, 2015
I have a table of status_Master where the details are maintained by street name with status but I need the result of total count by each status against the street name.
Status_Master
Sl NoStreetNameStatus
1       Delhi        Pending
2       Delhi        Working
3       Delhi        Working
4       Mumbai        Pending
5       Mumbai        Pending
6       Delhi        Working
7       Delhi        Problem
8       Mumbai        Working
9       Mumbai        Problem
50Â Â Â Â Â Â Â . Â Â Â Â Â Â Â .
100       .       .
200       .       .
Result as below
StreetNameWorkingPendingProblem
Delhi              3           1           1
Mumbai          1           2           1
View 2 Replies
View Related
May 12, 2006
table1 has 3 fields:
bookNumber
123
234
345
status -- status defaul value is 0
partnerNumber
1
2
3
table 2 has 2 fields
bookNumber
234
345
567
789
partnerNumber
1
2
3
4
A stored procedure named remove_books, which remove books if the conditions are true.
If stored procedure is executed. That means, it removes the bookNumbers from table2 if the conditions are true. Lets say it removes 234 from table2
then
do update in table1 status = 1 for BookNumber 234.
View 19 Replies
View Related
Aug 6, 2007
I need to know how can i see the replication status. I have 4 servers with ms sql 200 standard server and hundreds of commnad to replicate. Sometime is important to know how mush of this commnads is replicated.
Thank You.
View 10 Replies
View Related
