Syntax Error On Dynamic SP
Feb 14, 2004
I am some what new to stored procedures. Anyhow, I am attempting one and I am getting errors. I have overlooked my code numerious times and I can't figure out where I am going wrong....
ALTER PROCEDURE sp_gener_queue2
@ccr char(20),
@techchar(10),
@zonechar(5),
@statuschar(5),
@beginchar(10),
@endchar(10),
@sort char(10)
AS
DECLARE @SQLString varchar(5000)
SET @SQLString = 'SELECT wo_id, status, priority, customer_id, customer_name_1, customer_street_1, customer_city, customer_ac_1, customer_ph_1, customer_ac_2, customer_ph_2, customer_ac_3, customer_ph_3, access, call_type, eta_hour, eta_min, van_id, usr_create, tech_id, lname as tech_name, mfst_comment
FROM (wo_master LEFT JOIN usr ON tech_id = usr_id) LEFT JOIN mfst_remarks ON wo_id = mfst_wo_id'
if @ccr <> '' AND @tech = '' AND @zone = '' AND @status = ''
begin
SET @SQLString = @SQLString + 'WHERE usr_create ='+ @ccr +' AND date_est_run BETWEEN dbo.std2jul('+@begin+') AND dbo.std2jul('+@end+') ORDER BY '+ @sort
end
exec(@SQLString)
View 6 Replies
ADVERTISEMENT
Nov 1, 2007
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
CREATE PROCEDURE [dbo].[sp_try]
@TempTable varchar(25)
AS
DECLARE @SQL nvarchar(MAX)
DECLARE @SQLINSERT nvarchar(MAX)
BEGIN
--create temp table
SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +
'(
ContactName varchar (40) NOT NULL ,
ContactId varchar (30) NOT NULL ,
ContactrMessage varchar (100) NOT NULL,
)'
EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable
SELECT @sql= 'Select * from table'
SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )
SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition
EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable
View 8 Replies
View Related
Apr 17, 2015
declare @sql nvarchar(MAX)
SELECT @sql = (SELECT 'UPDATE STATISTICS ' +
quotename(s.name) + '.' + quotename(o.name) +
' WITH FULLSCAN; ' AS [text()]
FROM sys.objects o
JOIN sys.schemas s ON o.schema_id = s.schema_id
WHERE o.type = 'U'
FOR XML PATH(''), TYPE).value('.', 'nvarchar(MAX)');
PRINT @sql
EXEC (@sql)
The below Dynamic TSQL throws Error:
Error:
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'FOR'.
USE master
GO
DECLARE @str varchar(max), @sql nvarchar(MAX), @dbName nvarchar(max);
SET @dbName = 'user_db';
PRINT N'CHECKING DATABASE ' + @dbName;
SET @sql = 'USE ' + @dbname + ';' + '(SELECT '+'''UPDATE STATISTICS ''' + '+ ' + 'quotename(s.name)'+ '+' + '''.''' + '+' + 'quotename(o.name)' + '+' + '''WITH FULLSCAN; ''' + ' AS [text()]
FROM sys.objects o
JOIN sys.schemas s ON o.schema_id = s.schema_id
WHERE o.type ' +'= ' + '''U'' FOR XML PATH('' ''),TYPE).value(''.'''+ ','+ '''nvarchar(MAX)'''+')'
Print @sql
EXEC (@sql)
Not sure, why this is an error at FOR...
View 7 Replies
View Related
May 12, 2005
This forum has helped me get to this point a couple times with this project BUT I just can't seem to get the syntax correct. Either one of these two statements do exactly what I want them to do:SELECT @RtnValue = Column0 FROM MyTable WHERE RowIndex = @RIndexSELECT @RtnValue = (SELECT Column0 FROM MyTable WHERE RowIndex = @RIndex)
@RtnValue is the value the program will work with.
The only problem is that Column0 and @RIndex need to be dynamic so I can index through each Column and Row of the table.
This is the code I am trying to use to do this dynamically, naturally it will be in two while loop to index through each Column and Row
DECLARE @RtnValue smallintSET @RtnValue = 0
DECLARE @RIndex smallintSET @RIndex = 20
DECLARE @ColumnName varchar(10)SET @ColumnName = 'Column0'
DECLARE @MySelectString varchar(200)SET @MySelectString0 = 'SELECT @RtnValue = ( SELECT ' + @ColumnName + ' FROM MyTable WHERE RowIndex = ' + @RIndex + ' )'--SET @MySelectString1 = 'SELECT @RtnValue = ( SELECT ' + @ColumnName + ' FROM MyTable WHERE RowIndex = 1 )'
EXEC( @MySelectString0 )--EXEC( @MySelectString1 )
@MySelectString0 produces this error:Server: Msg 245, Level 16, State 1, Line 23Syntax error converting the varchar value 'SELECT @RtnValue = ( SELECT Column0 FROM MyTable WHERE RowIndex = ' to a column of data type smallint.
@MySelectString1 produces this error:Server: Msg 137, Level 15, State 1, Line 1Must declare the variable '@RtnValue'.
I have tried many different combinations of syntax but can not seem to get the magic combination. Can someone tell me the correct syntax to get this to work.
Thank you in advance.
View 2 Replies
View Related
May 14, 2008
CREATE TABLE #XYZ(
NTUser varchar(20),
FullNTName varchar(50),
FirstName varchar(20),
MiddleName varchar(20),
LastName varchar(40),
Rolename varchar(30))
DECLARE @NAME AS varchar(1000)
DECLARE @ADDRESS AS varchar(1000)
Declare CUR_C Cursor
For
Select Rolename
From DCJ_SecurityRole
Open CUR_C
Fetch Next From CUR_C
into @NAME
While @@fetch_status =0
Begin
IF @NAME not in('All','PUBLIC')
Begin
SET @ADDRESS = 'cn='+'''' + @NAME +''''+',OU=Groups, OU=AJP,DC=XYZ,DC=com'
INSERT INTO #UserDetail
EXEC ('
SELECT SAMAccountName as NTUSER,name as FULLNTNAME,givenname as FIRSTNAME,
initials as MIDDLENAME,sn as LASTNAME,''' + @NAME + ''' as Rolename FROM OPENQUERY
(ADSI, ''SELECT sAMAccountName,name,givenname,initials,sn FROM
''''LDAP://DC=XYZ,DC=com''''
WHERE
MemberOf=''''' + @ADDRESS +''''' '')
')
END
Fetch Next From CUR_C
into @NAME
END
CLOSE CUR_C
DEALLOCATE CUR_C
When I executes this code I am getting some syntax error like
Msg 102, Level 15, State 1, Line 8
Incorrect syntax near 'DCJAppDev'.where APJPRD is one of the role,
Can anyone suggest what dynamic sql part has error??
View 2 Replies
View Related
Feb 27, 2008
Hi,
I am using a simple if staement in a dynamic sql query what is its synax.
if @docType ='Doctor'
begin
select * from @tablename
end
Ranjeet Kumar Singh
View 3 Replies
View Related
Nov 12, 2007
I have a SSRS report that I'm passing a dynamic parameter to another SSRS report.
The datasourse is a SSAS cube. Can anyone tell me the if following syntax is correct for receiveing report.
I'm having trouble creating the datasource for the second report. I'm new at SSRS so any help would be appreciated.
When I parse this code in management Studio I get the following
An MDX Statement was expected. An MDX expression was specified.
'= [SELECT NON EMPTY { [Measures]].[Qty Paid]], [Measures]].[US Cost]], [Measures]].[Qty Recd]] } ON COLUMNS, NON EMPTY
{ ([Division_Plant]].[Hierarchy]].[Plant Desc]].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
FROM ( SELECT ( STRTOSET(([
+ " Parameters ! DivisionPlantDivisionDesc.Value + "[), CONSTRAINED) ) ON COLUMNS FROM [New GOLD]])
WHERE ( IIF( STRTOSET(([ " + Parameters ! DivisionPlantDivisionDesc.Value
+ " [), CONSTRAINED).Count = 1, STRTOSET(([ " + Parameters ! DivisionPlantDivisionDesc.Value + " [),
CONSTRAINED), [Division_Plant]].[Division Desc]].currentmember ) )
CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS'
View 6 Replies
View Related
Jul 12, 2007
Hi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand
View 4 Replies
View Related
Apr 20, 2007
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
View 2 Replies
View Related
Jan 23, 2008
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
View 12 Replies
View Related
Jan 7, 2004
Hi All, can someone help me,
i've created a stored procedure to make a report by calling it from a website.
I get the message error "241: Syntax error converting datetime from character string" all the time, i tryed some converting things but nothig works, probably it is me that isn't working but i hope someone can help me.
The code i use is:
CREATE proc CP_Cashbox @mID varchar,@startdate datetime,@enddate datetime
as
set dateformat dmy
go
declare @startdate as varchar
declare @enddate as varchar
--print "query aan het uitvoeren"
select sum(moneyout) / sum(moneyin)*100 as cashbox
from dbo.total
where machineID = '@mID' and njdate between '@startdate' and '@enddate'
GO
Thanx in front
Cya
View 14 Replies
View Related
Nov 24, 2004
Hello,
the following alter table statement:
ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY NONCLUSTERED
is answered with:
Server: Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'PRIMARY'.
which I consider to be interesting. Anyone has an idea why? I checked documentation but I do not see an error.
Note that:
ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL
DOES get executed, and
ALTER TABLE [dbo].[CalCalendar]
ALTER COLUMN [OID] uniqueidentifier NOT NULL PRIMARY KEY
produces the same error.
Now, in my understanding this has nothing to do with an index may already exist etc. - the eror indicates a SYNTAX error, before any checking. Makes no sense to me, though, reading the documentation.
So - anyone an idea?
View 4 Replies
View Related
Jan 31, 2008
I would like to fail a package depending on the error. The package extracts data from Excel files. I would like to continue processing if an Excel file is badly formatted, but stop processing if there is a serious issue. like the file server hosting the Excel files crashed.
I was thinking about dynamically changing the MaxeErrorCount property based on the Error ID or description.
Any ideas on an intelligent/simple way to do this
View 1 Replies
View Related
Aug 1, 2004
Hi,
I'm writing a stored procedure and when I click on the Check Syntax button its giving me the error in the subject. I'm not really sure whats wrong with this. Here is my Stored Procedure code. Any help wud be appreciated.
CREATE PROC CabsSchedule_Insert
{
@JulianDatesmallint,
@SiteCodesmallint,
@CalendarDaysmallint,
@BillPeriodsmallint,
@WorkDaysmallint,
@CalDayBillRcvd varchar(30),
@Remarksvarchar(50)
}
AS
INSERT INTO CabsSchedule
(JulianDate, SiteCode, CalendarDay, BillPeriod, WorkDay, CalDayBillRcvd, Remarks)
VALUES
(@JulianDate, @SiteCode, @CalendarDay, @BillPeriod, @WorkDay, @CalDayBillRcvd, @Remarks)
Thanks,
View 2 Replies
View Related
Apr 7, 2007
Hi Guys, I'm hoping somebody can help me with this really frustrating problem that I'm having.......
I'm developing a peer to peer file sharing application (final year degree project) in which I use a web service & sql database as the management server. For some strange reason, I'm getting an SQL syntax error on some machines but not on others when I call the method to submit a file list to the server (see below for code for the method). Another strange thing is that on different machines, I'm getting a different error. I've seen "incorrect syntax near 'd' ". and also "incorrect syntax near 've' ", while on two other machines it works just fine - It appears that the connection to the webservice and to the database is working just fine on all machines as before this method I have a login which works perfectly and the data is represented in the database.
Does anybody have any pointers or even the slighest idea what can cause an error like this or have seen anything like this before. Hoping to get this sorted pretty soon as the deadline is nearing. All and any help is very much appreciated!!!!
Kevin
public void submitFiles(FileObject[] files, string peerID)
{
foreach (FileObject fo in files)
{ System.Text.StringBuilder submit = new System.Text.StringBuilder("INSERT INTO SharedFiles (FileID, FileName, FileType, FileSize, PeerID) VALUES ('" + fo.guid.ToString() + "', '" + fo.name + "' ,'" + fo.name + "', '" + fo.size + "', '" + peerID + "')");
SqlConnection con = new SqlConnection(connectionString);
SqlCommand cmd = new SqlCommand(submit.ToString(), con);
try { con.Open();
cmd.ExecuteNonQuery();
} finally { con.Close(); }
}
}
View 2 Replies
View Related
Aug 8, 2007
Hello, I have this sql quiery: sqlcommand2.CommandText = "Select Count(UserIP) From InboundTraffic Where InboundURL Contains('" & SiteDomain(i).ToString & "') and DateTimeReceived > " & Last30Days
SiteDomain is placing a string variable such as website.com and Last30Days is a date variable which = now - 30days
Im getting this error "Syntax error (missing operator) in query expression 'InboundURL Contains('website.com') and DateTimeReceived > 7/9/2007 8:20:30 PM'"
What am I mising? THANKS!
View 5 Replies
View Related
Jan 17, 2008
Could someone help me with this error message:
Syntax error converting the varchar value '180 Ways to Walk the Leadership Talk by John Baldoni' to a column of data type int.
Getting error on the Titles.title column. Tried casting it but it still does not work. What am I missing?
CREATE procedure GetRequestInfo@Requestorid int
ASselect distinct requestors.Requestorid, CAST(Titles.title AS VARCHAR(255)), requestors.requestorEmail,Requestors.requestdate, fname, lname, phonenum,StreetAddress1, City, State, Zip,LibraryRequest.ShipDate,LibraryRequest.DueDate,LibraryRequest.ReturnDate,
Cast(DATEPART(m, requestors.requestDate) as Varchar(5)) + '/' +Cast(DATEPART(d, requestors.requestDate) as Varchar(5)) + '/' + Cast(DATEPART(yy, requestors.RequestDate) as Varchar(5)) as 'RequestDate'
from Requestorsjoin Titles on titles.Titleid = requestors.Titleidjoin libraryRequest on LibraryRequest.Titleid = LibraryRequest.Titleidwhere Requestors.requestorid = requestors.requestoridGO
View 2 Replies
View Related
Apr 17, 2008
Can anyone tell me why I get a syntax error on the THEN and the ELSE?
@Start datetime,@End datetime,@EmailAck bit,@SelectedProcess nvarchar(25)ASBEGINIF @SelectedProcess = 'Monthly' THENUPDATE tblReminderSchedule SETPrintedDate=GETDATE(),[Status]=1FROM tblReminderSchedule INNER JOIN tbllOAN ON tblReminderSchedule.lOAN_ID = tbllOAN.lOAN_IDWHERE (tblReminderSchedule.ReminderDate BETWEEN @Start AND @End) AND (dbo.tblReminderSchedule.ReceivedDate IS NULL) AND (tbllOAN.ReminderByEmail = @EmailAck) AND (tbllOAN.Frequency = 'Monthly')ELSEUPDATE tblReminderSchedule SETPrintedDate=GETDATE(),[Status]=1FROM tblReminderSchedule INNER JOIN tbllOAN ON tblReminderSchedule.lOAN_ID = tbllOAN.lOAN_IDWHERE (tblReminderSchedule.ReminderDate BETWEEN @Start AND @End) AND (dbo.tblReminderSchedule.ReceivedDate IS NULL) AND (tbllOAN.ReminderByEmail = @EmailAck) AND (tbllOAN.Frequency <> 'Monthly')END
View 4 Replies
View Related
Mar 21, 2004
I am trying to open a table in my DB to check for login ids:
The code I used is below> I will appreciate any help on this matter
<CODE>
Public Function Authorize(ByVal Username As String, ByVal Password As String) As Integer
Dim sql As String
Dim con As New SqlConnection("data source=localhost; initial catalog=Jasist; Integrated Security = SSPI")
sql = "Select * from USER Where User_Name = '" & Username & "' and User_Passwd = '" & Password & "'"
con.Open()
Dim cmd As New SqlCommand(sql, con)
Dim Id1 As Integer
Dim dr As SqlDataReader = cmd.ExecuteReader
If dr.Read Then
Id1 = 1
con.Close()
dr.Close()
Return Id1
Else
con.Close()
dr.Close()
Return 0
End If
End Function
<CODE>
THE ERROR GENERATED WAS->
Server Error in '/Jasist' Application.
--------------------------------------------------------------------------------
Incorrect syntax near the keyword 'USER'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'USER'.
Source Error:
Line 19: con.Open()
Line 20: Dim cmd As New SqlCommand(sql, con)
Line 21: Dim Id1 As Integer
Line 22: Dim dr As SqlDataReader = cmd.ExecuteReader
Line 23:
Source File: C:InetpubwwwrootJasistClass1.vb Line: 21
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
View 2 Replies
View Related
Mar 27, 2001
Hi, hope someone can spend a minute checking out my script error. The following is part of my SQL statement. It has got syntax error near "="
I was hoping the script could run 100 times and print number 1 to 100.
DECLARE @ID int
SET @id = 1
EXEC (' WHILE ' + @id + ' <= 100 ' + ' BEGIN SELECT ' + @id +
' SET ' + @id + ' = ' + @id + ' + 1 ' + ' END ' )
Any input is most welcome.
Richard
View 4 Replies
View Related
Oct 17, 2000
Can anyone tell me what is wrong with the script below?
INSERT INTO #SUBSCRIBERLIST(EMEMBER_GUID,EHBSID)SELECT (M.EMEMBER_GUID,@EHBSID)
FROM EMEMBER M WHERE M.EMEMBER_GUID = @EM_ID1 AND M.MEMBERTYPE <>1
This is the error I am getting.
Server: Msg 170, Level 15, State 1, Line 5
Line 5: Incorrect syntax near ','.
Thanks in advance.
Matt
View 1 Replies
View Related
Aug 31, 2004
hi
i am getting this error while running SQL query : syntax error near '='
Query is :
SELECT People.People, People.Name,
Sum(([ProjectStatusReport].[Week]), 0, ([ProjectStatusReport].[Week] = #8/27/2004#, 1, 0)) AS Created,
Sum((ProjectStatusReport.Week), 0, (ProjectStatusReport.Week = #8/27/2004#, (ProjectStatusReport.Accomplishments) Or (ProjectStatusReport.Plans), 0, 1, 0)) AS Complete,
People.email FROM Register INNER JOIN SR_Status ON Register.SR_Status = SR_Status.SR_Status
LEFT JOIN ProjectStatusReport ON Register.Register = ProjectStatusReport.Project INNER JOIN StakeHolders
ON Register.Register = StakeHolders.Register INNER JOIN People ON StakeHolders.People = People.People
WHERE SR_Status.Status='Active' AND StakeHolders.Status = 'Yes' GROUP BY People.People, People.Name, People.email
HAVING (Sum(ProjectStatusReport.Week), 0, ((ProjectStatusReport.Week) = #8/27/2004#, 1, 0) > 0))
AND Sum(ProjectStatusReport.Week),0,((ProjectStatusRep ort.Week) = #8/27/2004#,(ProjectStatusReport.Accomplishments) Or (ProjectStatusReport.Plans),0,1,0)>0
ORDER BY People.People
Any help
Regards
View 2 Replies
View Related
Feb 6, 2007
Hi All,
When I run the following portion of my stored procedure, I get the following error message:
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Here is the script:
set @dttimestr = 'select @dttime = substring(convert(varchar(11),getdate(),120),1,4)+
substring(convert(varchar(11),getdate(),120),5,3)'
EXECUTE sp_executesql @dttimestr, N'@dttime datetime output', @dttime output
print @dttime
Can you please tell me how to fix it?
View 3 Replies
View Related
Jul 1, 2004
Quick question..
SELECT * FROM Table_1
INTERSECT
SELECT * FROM Table_2
INTERSECT
SELECT * FROM Table_3;
Syntax error in FROM clause, and it highlights the second select.. whats wrong with this statement? does it not like the *'s?
Thx
View 2 Replies
View Related
Sep 14, 2004
I get the following errors with the script below:
I am novice with SQL and have been unable to figure out the syntax just yet. The line for the errors are marked blue
Server: Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'user'.
Server: Msg 170, Level 15, State 1, Line 26
Line 26: Incorrect syntax near '='.
Server: Msg 170, Level 15, State 1, Line 29
Line 29: Incorrect syntax near 'auto_increment'.
Server: Msg 170, Level 15, State 1, Line 44
Line 44: Incorrect syntax near '='.
Server: Msg 170, Level 15, State 1, Line 53
Line 53: Incorrect syntax near '='.
-----------------------------------------------------------
CREATE TABLE admin (
user varchar(100) NOT NULL default,
pass varchar(100) NOT NULL default ''
) TYPE=MyISAM;
INSERT INTO admin VALUES ( 'admin', 'pass456');
CREATE TABLE affiliates (
refid varchar(30) NOT NULL default '',
pass varchar(20) NOT NULL default '',
company varchar(100) NOT NULL default '',
title varchar(5) NOT NULL default '',
firstname varchar(40) NOT NULL default '',
lastname varchar(40) NOT NULL default '',
website varchar(100) NOT NULL default '',
email varchar(100) NOT NULL default '',
payableto varchar(100) NOT NULL default '',
street varchar(100) NOT NULL default '',
town varchar(100) NOT NULL default '',
county varchar(100) NOT NULL default '',
postcode varchar(20) NOT NULL default '',
country varchar(100) NOT NULL default '',
phone varchar(30) NOT NULL default '',
fax varchar(30) NOT NULL default '',
date varchar(40) NOT NULL default ''
) TYPE=MyISAM;
CREATE TABLE banners (
number int(3) NOT NULL auto_increment,
name varchar(50) NOT NULL default '',
image varchar(60) NOT NULL default '',
description varchar(200) NOT NULL default '',
PRIMARY KEY (number)
) TYPE=MyISAM;
CREATE TABLE clickthroughs (
refid varchar(20) default 'none',
date date NOT NULL default '0000-00-00',
time time NOT NULL default '00:00:00',
browser varchar(200) default 'Could Not Find This Data',
ipaddress varchar(50) default 'Could Not Find This Data',
refferalurl varchar(200) default 'none detected (maybe a direct link)',
buy varchar(10) default 'NO'
) TYPE=MyISAM;
CREATE TABLE sales (
refid varchar(20) NOT NULL default '',
date date NOT NULL default '0000-00-00',
time time NOT NULL default '00:00:00',
browser varchar(100) NOT NULL default '',
ipaddress varchar(20) NOT NULL default '',
payment varchar(10) NOT NULL default ''
) TYPE=MyISAM;
HELP!
View 1 Replies
View Related
Jun 30, 2004
Code:
str_IntroducerInfo = "UPDATE tblPolicy SET " & _ "Saluation = '" & saluation & "', " & _
"ClientName = '" & tempName & "', " & _
"ClientNRIC = '" & nric & "', " & _
"Submitted = '" & submitted & "', " & _
"Inforced = '" & inforced & "', " & _
"PolicyNo = '" & policyno & "', " & _
"ProductName = '" & productname & "', " & _
"ProductProvider = '" & productprovider & "', " & _
"ModalPremium = '" & modalpremium & "', " & _
"Freq = '" & freq & "', " & _
"Method = '" & method & "', " & _
"NextBirth = '" & nextbirth & "', " & _
"PremTerm = '" & premiumterm & "', " & _
"PolicyTerm = '" & policyterm & "', " & _
"Status = '" & pstatus & "', " & _
"ApplType = '" & appltype & "', " & _
"ApplType(A&H) = '" & appltypeah & "', " & _
"SupervisorAgree = '" & supervisoragree & "', " & _
"SupervisorRemarks = '" & superremarks & "', " & _
"Remarks = '" & remarks & "', " & _
"DateSig = '" & datesig & "', " & _
"AuthPerson = '" & authPerson & "', " & _
"CorFax = '" & corfax & "', " & _
"Contact = '" & number1 & "', " & _
"Contact1 = '" & number2 & "', " & _
"CorAddress = '" & address & "', " & _
"CorEmail = '" & email & "', " & _
"CorNature = '" & nature & "', " & _
" WHERE ID = '" & introducerID & "';"
response.Write(str_IntroducerInfo)
set rs_IntroducerInfo=conn.Execute(str_IntroducerInfo)
The output from the line
Code:
UPDATE tblPolicy SET Saluation = 'Miss', ClientName = 'Karlam Pte Ltd', ClientNRIC = 'S7908121X', Submitted = '24 February 2003', Inforced = '25 February 2003', PolicyNo = '30', ProductName = 'Shop Care', ProductProvider = 'Liberty Insurance', ModalPremium = '50000', Freq = 'Yearly', Method = 'Cheque', NextBirth = ' ', PremTerm = '5', PolicyTerm = '2', Status = 'EE', ApplType = 'AWS', ApplType(A&H) = 'A', SupervisorAgree = 'Yes', SupervisorRemarks = 'Good', Remarks = 'Bad', DateSig = '21 March 2004', AuthPerson = 'Ho LiLi', CorFax = '68525687', Contact = '68523652', Contact1 = '65825588', CorAddress = '20 Robotson Road, Robot Tower B, #03-98, S(263673)', CorEmail = 'karlam@kar.com', CorNature = 'Trading', WHERE ID = '80017-S7908121X';
The error
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/Ivan-Test/ops/comm.asp, line 1851
My Access table fields
ID
PolicyNo
Submitted
Inforced
Saluation
ClientName
ClientNRIC
FACode
Type
ProductProvider
ProductName
ModalPremium
Freq
Method
NextBirth
PremTerm
PolicyTerm
Status
ApplType
ApplType(A&H)
SupervisorAgree
DateSig
SupervisorRemarks
Remarks
AuthPerson
Contact
Contact1
CorAddress
CorFax
CorEmail
CorNature
View 3 Replies
View Related
Jun 6, 2004
I have finally created (with your help) a stored procedure that is working and giving me the correct results,but when I have included the last part of my select statement where I am always trying to grab dates for the previous month it gives me the following syntax error "Incorrect syntax near '01'."
Here comes the precudere:
DECLARE @returnDay int
DECLARE @query varchar(8000)
--Looking at current date,
SELECT @returnDay = DatePart(day,GetDate())
If @returnDay = 8
BEGIN
SELECT @query = 'bcp "SELECT a.HospitalName,a.HospitalCode,c.ProductName,b.Unit sDiscarded,d.FateOfProducts,b.DateEntered,b.DateCo mpleted,b.CompiledBy FROM Ivana_test.dbo.Units b INNER JOIN Ivana_test.dbo.Hospitals a ON (a.HospitalID = b.HospitalID)INNER JOIN Ivana_test.dbo.Products c ON (b.ProductID = c.ProductID)INNER JOIN Ivana_test.dbo.FateOfProducts d ON (d.FateID = b.FateID) where b. DateEntered = DateAdd(month, -1, Convert(CHAR(8), GetDate(), 121) + '01')ORDER BY a.HospitalID" queryout c: est.txt -c -test -Usa -Ptest'
EXEC master.dbo.xp_cmdshell @query
EXEC master.dbo.xp_sendmail @recipients=test@test.com',
@copy_recipients = test@test.com',
@message='Submitting BloodBank Results for the previous month.
@subject='BloodBank results for the previous month',@attachments = '\testc$ est.txt'
SELECT @@ERROR As ErrorNumber
END
Could somebody help me and suggest something as I am going crazy......here...
Thanks
View 1 Replies
View Related
Jan 19, 2007
I have a syntax error of
Server: Msg 170, Level 15, State 1, Line 21
Line 21: Incorrect syntax near '<'.
When running the following.
I have highlighted the offending character.
DECLARE @Todayvarchar(30)SET @Today = GetDate()
DECLARE @Aprilvarchar(30)SET @April = '01/04/'
DECLARE @Augustvarchar(30)SET @August = '01/08/'
DECLARE @LastYear varchar(30)SET @LastYear = YEAR(DATEADD(yy,-1,GetDate()))
DECLARE @ThisYear varchar(30)SET @ThisYear = YEAR(GetDate())
SELECTe.employee_numberAS 'Employee Number',
e.known_as_and_surnameAS 'Name',
b.benefit_codeAS 'Benefit Code'
FROMpwa_master.employeee,
pwa_master.benefitb
WHEREe.unique_identifier = b.parent_identifier
ANDb.benefit_code = 'BONUS'
ANDe.company_reference IN ('NGB','NGBO','BMS')
ANDe.payment_method = 'MONTHLY'
ANDb.benefit_start_date >=
(
CASE @Today < @April + @ThisYear
THEN
@LastYear
ELSE
(
CASE @Today > @April + @ThisYear
THEN
(
CASE e.company_reference WHEN 'NGB'
THEN
@April + @ThisYear
ELSE
@April + @LastYear
END
)
ELSE
(
CASE @Today > @August + @ThisYear
THEN
@April + @ThisYear
END
)
END
)
END
)
GROUP BY employee_number, known_as_and_surname, benefit_code, e.company_reference
Can anyone tell me why this happens?
I swear I have made case statements like this before (usign variables and greater-than signs etc).
It is hopefully me just being a dumba** but I can't see what's wrong with it.
-GeorgeV
View 14 Replies
View Related
Feb 7, 2007
Hi All,
When I run the following portion of my stored procedure, I get the following error message:
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Here is the script:
set @dttimestr = 'select @dttime = substring(convert(varchar(11),getdate(),120),1,4)+
substring(convert(varchar(11),getdate(),120),5,3)'
EXECUTE sp_executesql @dttimestr, N'@dttime datetime output', @dttime output
print @dttime
Can you please tell me how to fix it?
View 8 Replies
View Related
Apr 2, 2008
Does anyone know why this blows up with a syntax error?
declare @dbccpage table (
ParentObject sysname,
Object sysname,
Field sysname,
VALUE sysname
)
insert into @dbccpage
exec ('dbcc page (<dbid>, <file-id>, <page-in-file>) with TableResults')
select Field, VALUE
from @dbccpage
where Field like 'Metadata:%'
View 5 Replies
View Related
Apr 17, 2008
Syntax error converting the varchar value '1,876.43 ' to a column of data type int.
i got this error im not really sure what its all about.
View 2 Replies
View Related
Jun 24, 2008
This is a simple error but for some reason i've been staring at it for 30 mins and still can't seem to find whats wrong!! If someone can help that would be greatly appreciated. i'm getting the error:
Msg 102, Level 15, State 1, Procedure LibraryAddAdult, Line 12
Incorrect syntax near '('.
THERE IS NO ( NEAR LINE 12!
USE Library
GO
CREATE PROC LibraryAddAdult
@firstname shortstring,
@lastname shortstring,
@street shortstring,
@city shortstring,
@state statecode,
@zip zipcode,
@member_no member_no,
@middleinitial letter = ' ',
@phone_no phonenumber = ' ',
@expr_date datetime = dateadd(year, 1, getdate())
OUTPUT
AS
IF (
(@firstname = ' ') OR
(@lastname = ' ') OR
(@street = ' ') OR
(@city = ' ') OR
(@state = ' ') OR
(@zip = ' ') OR
(@member_no = ' ')
)
RETURN SELECT 'You must insert appropriate name, street, city, state, zip'
INSERT INTO member(firstname, lastname, middleinitial)
VALUES (@firstname, @lastname, @middleinitial)
INSERT INTO adult(street, city, state, zip, phone_no, expr_date)
VALUES (@street, @city, @state, @zip, @phone_no, @expr_date)
SET @member_no = SCOPE_IDENTITY()
RETURN
SELECT 'Member has been successfully added to the database'
SELECT (lastname + ' ' + middleinitial + ' ' + lastname) AS Name, street, city, state, zip, phone, expr_date
FROM member
INNER JOIN adult
ON member.member_no = adult.member_no
View 1 Replies
View Related
