Hi all
as like there is a query in oracle as
select * from tab
we get all tables
Like wise is their any query in sql server 2005
b'coz
I want all system procedures
as like sp_password or sp_help
i want list of all procedures
for that i wrote query as
select * from sysobjects
but in output i don't find any name starting with sp_
Thanks in advance
Malathi Rao
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
hi, i see there are lots of system store procedures available but could you specify me the ones that are used in day to day work as a DBA??
View 6 Replies View RelatedI am trying to determine which are undocumented system procedures used to satisfy our company's security audit. Well, the nature of undocumented system procedures is it's undocumented. Hence, it's hard to find.
So, is there a way I can get a list of SQL Server documented system procedures?
About a year ago we inherited a SQL server (7.0) from another division of our company. The time has come to migrate the SQL Server functionality onto a new machine. Before I do this though, I need to figure out what the initial installation configuration was so I can set up the new server with the same specs. I am looking for a system stored procedure(s) that can tell me the following:
Case sensitivity, accent sensitivity, SQL build (SP), character set, etc. Basically I need to know what checkboxes were ticked during the initial set up of the server.
Any help would be greatly appreciated. TIA.
So every database i created has no system stored procedures. I didn't know how that could happen as I am not the person who installed sql2000. What should I do to get all the system stored procedures back?
TIA
I am trying to edit a system stored(sp_add_dtspackage) procedure and cannot for the life of me find where to edit. This procedure does a check to keep users from saving changes to a package they do not own. I need users to be able to change the the packages when they are not always the one who created.
View 2 Replies View RelatedI have a SQL Server installation that is missing the stored procedures used for mail (xp_startmail, xp_stopmail, etc.). Is there a way that I can put these on the server without having to reinstall SQL? I tried to generate them from other servers but SQL won't allow you to do this with these particular stored procedures.
View 1 Replies View RelatedWhen I create a new database, the system stored procedures are missing;
dt_addtosourcecontrol_u
dt_checkinobject_u
etc.
I'm logged in as sa.
I need to create a stored procedure in the master database (yes, I know it's not that good of an idea). I'm working with SQL 2K5, SP2 Whenever I create it, it is marked as a system stored procedure no matter what I name it, what schema I put it in, or what user I use to create it (sysadmin or minimal permissions).
As soon as I create it, if I do any of the following, I can see it to be a system stored procedure and not a regular user sp.
1) SELECT * FROM sys.objects where is_ms_shipped = 1
2) SELECT * FROM sys.procedures where is_ms_shipped = 1
3) Looking in SSMS... There is a special folder for system stored procedures in SSMS, and mine is in there.
At least in my case, the only thing it hurts is that you have to be a sysadmin to execute that stored procedure (and I need to have a non sysadmin be able to execute it). Other than that, it executes normally when run by a sysadmin.
Any suggestions on why this is happening? It's only happening on 1 out of about 80 SQL servers we have.
I tried this morning to check some of the system stored procedures and ran into trouble. Only four of them executed: sp_alterdiagram, sp_creatediagram, sp_dropdiagram and sp_helpdiagramdefinition. I could not check all the rest, I did it selectively. The typical error message was: Invalid object on RETURN statement. Some had syntactical errors.
sp_ActiveDirectory_Obj
Invalid object name 'sys.sp_ActiveDirectory_SCP' Line 171
sp_ActiveDirectory_SCP
Invalid object name 'sys.sp_ActiveDirectory_SCP' Line 171
sp_ActiveDirectory_Start
Invalid object name 'sys.sp_ActiveDirectory_Start' Line 19
Invalid object name 'sys.sp_add_agent_parameter' Line 60
Invalid object name 'sys.sp_add_agent_profile' Line 123
Invalid object name 'sys.sp_add_data_file_recover_suspect_db' Line 17
sp_addalias
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 44
Incorrect syntax near '%'.
Msg 195, Level 15, State 10, Procedure sp_addalias, Line 64
'get_sid' is not a recognized built-in function name.
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 78
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 119
Incorrect syntax near '%'.
sp_bindefault
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 95
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 134
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 182
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 208
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 228
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 264
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 273
Incorrect syntax near '%'.
sp_databases
Invalid object name 'sys.sp_databases'. Line 6
sp_tables
Invalid object name 'sys.sp_tables'
Is there a chance that these errors are due to the fact that I executed them without parameters?
Thanks
In SQL 2000 for Procedures
View 5 Replies View RelatedI know there are a lot of undocumented system stored procedures such as xp_ntsec_enumdomains, xp_instance_regread etc, that exist on SQL Server.
Does anyone know of any good websites that contain descriptions of what these stored procedures do? In particular I know that a default installation of SQL Server 2000 leaves permission to execute many of these granted to public and I am interested in finding out what the implications of each one of these are? I have tried Googling this topic but there doesn't seem to me much or there (or what is there is in Chinese and I don't really want to click on to!)
Once again thanks for the help.
i found that some stored procedure get created automatically in sqlserver 2000 (system stored procedures) ,while doing my work i accidentally deleted those stored procedures can any body answer following questions1: why these stored procedures are there and automatically created2: what happen en if i deleted those stored procedures3: how to recreate those stored procedures with limited user permission thanks in advance
View 2 Replies View RelatedI recall that stored procedures created in the master database and having a name beginning with sp_ are available from all databases. However, I've found varying results when invoking such a procedure from a different database. For example:
DECLARE tables CURSOR FOR
select name from sysobjects
where type='U'
order by name
for read only
populates a cursor with the list of tables in the database from which you are running the procedure. However this query in the same stored procedure:
SELECT count(*)
FROM sysExcludeMaint
WHERE @tablename like tablename
fails with "Invalid object name 'sysExcludeMaint'." if the table sysExcludeMaint
doesn't exist in the master database (it does exist in the database from which I've invoked the proc). I'm not clear on why the different results. Anyone know?
A system stored procedure got accidentally deleted, and all backups aresince the stored procedure was deleted (wonderful!)Can the SQL for the stored procedure be extracted from another serverand loaded as opposed to removing everything and then rebuilding theserver?Thanks in advance!
View 1 Replies View RelatedHello, I want to export/import a non system stored procedures from one DB to another. How Should I proceed ?
Thanks in advance.
how to implement the replication with the System Stored Procedures or the Transact-SQL ?
i want to encapsula my replication and make it be reusable and ease to use.So i want to do the replication in a script file.how can i do this?
Thanks.
Hi there
View 5 Replies View RelatedWhat system stored procedures have changed between SQL 2000 and SQL 2005?
View 4 Replies View RelatedHello,
We are trying to be proactive and stop a potential performance issue by reducing the number of recompiles in our SQL 2000 database application. This database is replicated. After viewing output from Profiler and PerfMon it seems that over 90% of the recompiles are due to system stored procedures generated by replication merge agents. Can anything be done about this?
Thanks
I have created a store procedure in sql server 2005.
At first, it shows up as a normal user defined store procedure in Object explorer.
Recently, I found I could not found the procedure in normal place. But the execution is fine.
Finally I found it stays under system procedure folder.
How this could happen?
disable the following system stored procedure (xp_grantlogin and xp_revokelogin)?
View 5 Replies View RelatedHi all,
I would like to enable users that do not belong to groups (server roles) such as sysadmin, serveradmin and don't have db permissions such as ddl_admin or db_owner to run some of the system stored procedures (such as sp_addumpdevice sp_configure sp_serveroption ...) and DBCC commands (such as DBCC CHECKFILEGROUP - requires ob_owner or sysadmin permission).
Is it possible to change permissions of SQL Server system stored procedures?
Is it possible to change permissions of SQL Server DBCC commands?
Thanks,
Assaf
Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
Reporting services is configured to use a custom security extension in the following Environment.
Windows xp
IIS 5.0
when i go to http://servername/reports , the UIlogon.aspx page loads fine and i enter username and password. but i get logon failed.
when i go to http://servername/reportserver , the logon.aspx does not load and i get the following error message :
"Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
any idea ? .
chi
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
Hello!
Hopefully someone can help me.
I have scripts to refresh database as SQL daily jobs. (O.S is Win2K3 and SQL server 2000 and SP4) It was worked and I got the following message this morning from SQL error log.
Internal I/O request 0x5FDA3C50: Op: Read, pBuffer: 0x0D860000, Size: 65536, Position: 25534864896, RetryCount: 10, UMS: Internal: 0x483099C8, InternalHigh: 0x0, Offset: 0xF1FF1E00, OffsetHigh: 0x5, m_buf: 0x0D860000, m_len: 65536, m_actualBytes: 0, m_errcode: 1450, BackupFile: \XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK
BackupMedium::ReportIoError: read failure on backup device '\XAPROD12MASTERXAPRODXAPROD_db_200701290000.BAK'. Operating system error 1450(Insufficient system resources exist to complete the requested service.).
Hi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedHello,
I am getting the following error from my SqlClr proc. I am using a third party API, which is making call to some webservice.
System.InvalidOperationException: There is an error in XML document (11, 2). ---> System.ArgumentException: Item has already been added. Key in dictionary: 'urn:iControl:Common.ULong64' Key being added: 'urn:iControl:Common.ULong64'
System.ArgumentException:
at System.Collections.Hashtable.Insert(Object key, Object nvalue, Boolean add)
at System.Collections.Hashtable.Add(Object key, Object value)
at System.Xml.Serialization.XmlSerializationReader.AddReadCallback(String name, String ns, Type type, XmlSerializationReadCallback read)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.InitCallbacks()
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, Boolean elementCanBeType, String& fixupReference)
at System.Xml.Serialization.XmlSerializationReader.ReadReferencingElement(String name, String ns, String& fixupReference)
at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReader1.Read5926_get_failover_stateResponse()
at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer8221.Deserialize(XmlSerializationReader reader)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, Xml
...
System.InvalidOperationException:
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at iControl.SystemFailover.get_failover_state()
at F5CacheManager.GetActiveLBIPaddress()
Found a similar problem in a different thread, but couldn't find any solution. I was wondering if there is an open case for this issue?
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=398142&SiteID=1
Hi,I have a few things on my databases which seem to be neither true systemobjects or user objects - notably a table called 'dtproperties' (createdby Enterprise manager as I understand, relating to relationship graphingor something) and some stored procs begining with "dt_" (some kind ofsource control stuff, possible visual studio related). These show up whenI use"exec sp_help 'databaseName'"but not in Ent. Mgr. or in Query Analyzer's object browser, and also notin a third party tool I use called AdeptSQL. I am wondering how thosetools know to differentiate between these types of quasi-system objects,and my real user data. (This is for the purpose of a customized schemagenerator I am writing). I'd prefer to determine this info with systemstored procs (ie sp_help, sp_helptex, sp_...etc) but will dip into thesystem tables if needed.Thanks,Dave
View 1 Replies View Related