I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."
How can i capture this error without having the script fail? Is there another way to get this done?
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I want to get Email address from sql database. But whenever I executed stored procedure I get an error message "Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int" If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*), CASE WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)' WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)' WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)' ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max) this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient Imports system.web.configuration
Partial Class Admin_emag_insert Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click Me.VersionTextBox.Text = "" End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click Dim objConnection As SqlConnection Dim objDataCommand As SqlCommand Dim ConnectionString As String Dim record_date As Date Dim version As String Dim emagSQL As String
'save form values in variables record_date = Record_DateTextBox.Text version = VersionTextBox.Text
'Create and open the connection objConnection = New SqlConnection(ConnectionString) objConnection.Open() emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _ "values('" & record_date & "','" & version & "')"
'Create and execute the command objDataCommand = New SqlCommand(emagSQL, objConnection) objDataCommand.ExecuteNonQuery() objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
here is my code the falue of pr_h_reqby is "Test" Dim strconn As New SqlConnection(connstring) Dim myReqdata As New DataSet Dim mycommand As SqlDataAdapter Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & "" mycommand = New SqlDataAdapter(sqlstr, strconn) mycommand.Fill(myReqdata, "mydata") If myReqdata.Tables(0).Rows.Count > 0 Then 'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString() lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString() lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString() lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString() lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString() txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString() End If
a) Date: I have a table called Table1. It has a field called HDate(nvarchar type). The records are like this; HDate H01042008 H01082008 H01102006 H01112008
Each records always start with an H charatcter, the remaining characters always represents date in the format of DDMMYYY. I want to convert this format into the date format of YYYYMMDD. So once coverted, the record should be as follows; HDateConverted 2008-04-01 2008-08-01 2006-10-01 2008-11-01
b) In the same table I have another field called NoID of nvarchar type. The records are like this; NoID 00. 000 001 002 003 004 005 006 007 008 010
I want to convert it to Integer. Once converted the records for above example should be like this; NoIDConverted 0 0 1 2 3 4 5 6 7 8 10
How can I solve both these conversions?.. Thanks a million for your qucik help.
I have a web page which executes a stored procedure with several parameters. On execution I get an error for the following piece of code. I will be passing null value to the stroed procedure for this parameter "ActiveDate". Dim parameterActivedate As SqlParameter = objCommand.Parameters.Add("@Activedate", SqlDbType.DateTime) parameterActivedate.Value = "" The error is: System.InvalidCastException: Conversion from string "" to type 'Date' is not valid. at Microsoft.VisualBasic.CompilerServices.Conversions.ToDate(String Value) at webpage.Do_Update(Object Sender, EventArgs e)
I am trying to execute a custom DTS package i made using VB. The SQL datatypes that I am using are short, VarChar and Single in SQL. Would anybody happen to know the equivalent data types in MSAccess 97?
Im running the following join on derived/real tables. I get 18 rows when I run query1 mentioned below & I get 122 rows in query 2. Column, id is nvarchar & column membernumber is INT. Im converting nvarchar to INT ...but it is still not fetching desired results..
Thanks Anil Kumar.
Query1--
select isnull(ea.id,0) , coalesce(sum(ea.earn),0) , coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0) from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea left outer join (select A.Membernumber, A.RecruitingBonus from (select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus from beebusiness bb join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid join beeentity be on be.beeentityguid = bb.beeentityguid where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B -- on B.Membernumber = ea.id -- where ea.earn != 0 or b.RecruitingBonus != 0 group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)
Query 2--
select isnull(ea.id,0) , coalesce(sum(ea.earn),0) , coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0) from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea left outer join (select A.Membernumber, A.RecruitingBonus from (select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus from beebusiness bb join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid join beeentity be on be.beeentityguid = bb.beeentityguid where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B -- on B.Membernumber = convert(int, ea.id) -- where ea.earn != 0 or b.RecruitingBonus != 0 group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)
im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks
Hi, I'm using this code to export record from sql to excel and i got this error message "Implicit conversion from data type text to nvarchar is not allowed. use the convert function to run this query"
Excel file is already created columns in the view and excel file are the same and cell format of the excel is converted to text.
--- code used insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=c:filename.xls;', 'SELECT * FROM [filename$]') select * from ViewName
I am not sure if this is the right place to post, although I am new to SQL Server.
I upsized a database from MS Access to SQL Server 2005 on my local machine. I am trying to change the primary key from int to uniqueidentifier, but I get this error: "conversion from int to uniqueidentifier is not supported on the connected database server". I have tried googling around to see if anyone has posted an answer, but haven't found a solution. I have also tried detaching the database, but that doesn't help either.
Can someone help me understand what the error is meaning by "connected database server", and how I can make it possible to change the data type?
Hi guys I exported some data from a text file to sql server. Here is the sample data..
This table has about 2 million rows.There is a date field in the table which comes as a 'nvarchar' in sql .When i try to convert it to a 'datetime' , i get an error as operation timed out..
Here is the data from the text file...
Date dispensed Outliers Formulation ID Provider Number (dispensing) NSS flag Patient category Units dispensed Total days supply 1/01/2006 12:00:00 a.m. normal 106509.00 7952 I A 120.00 30.00 1/01/2006 12:00:00 a.m. normal 106509.00 8208 I A 360.00 90.00 1/01/2006 12:00:00 a.m. normal 106509.00 9460 I A 120.00 30.00 1/01/2006 12:00:00 a.m. normal 106509.00 10184 I A 120.00 60.00 1/01/2006 12:00:00 a.m. normal 106509.00 10291 I A 120.00 60.00 1/01/2006 12:00:00 a.m. normal 106509.00 11149 I A 120.00 30.00 1/01/2006 12:00:00 a.m. normal 106509.00 11294 I A 120.00 60.00 1/01/2006 12:00:00 a.m. normal 106509.00 11777 I A 120.00 30.00 1/01/2006 12:00:00 a.m. normal 106509.00 12048 I A 120.00 30.00
I have a stored procedure a portion of which looks like this:
IF (CAST (@intMyDate AS datetime)) IN ( SELECT DISTINCT SHOW_END_DATE FROM PayPerView PP WHERE PP_Pay_Indicator = 'N' ) BEGIN --ToDo Here END
where: @intMyDate is of type int and is of the form 19991013 SHOW_END_DATE is of type datetime and is of the form 13/10/1999
however when I run the procedure in sql query analyzer as:
EXEC sp_mystoredproc param1, param2
i get the error:
Server: Msg 242, Level 16, State 3, Procedure usp_Summary_Incap, Line 106 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
what is the proper way of doing the conversion from int to datetime in stored procedure?
When i am running package thru SQL server job and getting follwing error:
SIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.". SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029.
In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.
Here are couple of points:
1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.
INSERT INTO stg_billing_table (Billing_date) SELECT Billing_date FROM stg_billing_table;
2) When I am running package from Solution explorer then also it works fine.
Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.
One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.
Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?
I have a problem while transforming data from an Access DB to an SQL 2005 DB.
Context:
- Migration of packages from SQL 2000 to SQL 2005 - DB SQL 2005 is a back up from SQL 2000 - The access DB is the same than the one used with SQL 2000
Error:
[OLE DB Source [1]] Error: There was an error with output column "ID" (32) on output "OLE DB Source Output" (11). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Access Source:
tblSource
ID DateID ConfigIDRequest FromTime ToTime
43221 01.01.2007 362 00.00 05.30
43233 01.01.2007 362 21.10 23.59
43234 01.02.2007 362 00.00 05.30
43244 01.02.2007 362 21.10 23.59
43247 01.03.2007 362 00.00 05.30
...
SQL Destination:
Destination table SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[tblDestination]( [ID] [int] NOT NULL, [DateID] [nvarchar](10) NULL, [ConfigIDRequest] [int] NULL, [FromTime] [nvarchar](5) NULL, [ToTime] [nvarchar](5) NULL ) ON [PRIMARY]
SSIS Package description:
- Control Flow:
* Data Flow Task - Data Flow:
* OLE DB Source pointing to tblSource, using AccessCon * OLE DB Destination pointing to tblDestination, using SQL2005Con - Connections:
* AccessCon : Native OLE DBMicrosoft Jet 4.0 OLE DB Provider pointing to AccessSource.mdb * SQL2005Con : Native OLE DBMicrosoft OLE DB Provider for SQL Server
NB: All those components are default configured
Previous tests executed:
1. OLE DB Source Preview : OK, same records. 2. Error redirection to flat file for ID column : here are the first records
3. Execute the transformation on the SQL2000 server, for the same Access DB, to the initial SQL 2000 DB : OK, no error.
Questions:
- Do you have an idea of what differs between SQL2000 and SQL2005 in this kind of situation? - Why is this working for 2000 and not 2005? - Why the error message says "output column "ID" (32) on output "OLE DB Source Output" (11). ". Shouldn't it be something like "output column "ID" (32) on input "ID" (11). " (with the second ID column for the SQL DB). - May be the error comes from my connections parameters, one parameter which doesn't exists in SQL2000?
I am using SQL Server 2000. I have created a Store Procedure to insert information, 4 of the fields are date types. I am using OleDb Data Provider (System.Data.OleDb) namespace.
The dates are filled by a form (web form) on submit event, I created a class that has functions to create my OleDb Parameters. I add the parameters to the command and execute it through a SQL Server Stored Procedure. In the event that I must have coded something wrong, I tested in the SQL Query Analyzer and the IN parameters for the date I used the getDate() method. This is where I know it is OleDb and SQL Server Parameters.
What Converstion Format should I use in the SP for the date? OleDb.date are doubles from some date in 1979 or something or another. So I used an OleDbDataType.DBDate. It seems that when the Stored Procedure uses the IN Parameters dates provided by OleDbDataType.Date or DBDate, that it doesn't like the int format. I am guessing that I am not converting the date in the parameters in the Insert of the Store Procedure... this is basically what I have...
Function to add parameters and execute SP
private int _startdate = DateTime.Now; private int _finishdate = DateTime.Now.AddDays(30);
CREATE PROCEDURE myInsert @StartDate datetime, @FinishDate datetime AS
INSERT INTO myTable (STARTDATE, FINISHDATE) VALUES (Convert(datetime, @StartDate), Convert(datetime, @FinishDate))
Please keep in mind that I am using System.Data.OleDb namespace..... please don't tell me to use SQLClient, it seems since I've been so adaptive of using OleDb, that it sould work just as well. I am way too far into this to change my Provider to SQL Client, but I promise myself that the next project (if using SQL Server, I will be using SQLClient and I will keep using OleDb for Oracle.) *sigh*
My query was working fine until I added the yellow highlighted areas below. Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate. Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
