I am using SqlServer 2005 and I have created small sample table with culumns that have Extended properties. FirstName have [First Name] extended propery called M_Caption. Then I created a view from the table to use in an access database. My problem is, I can't get the table column extended properties to show up in the view column extended properties.
Here is the table
/****** Object: Table [dbo].[Person] Script Date: 04/07/2008 14:42:01 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Person]( [Id] [int] NULL, [FirstName] [nvarchar](50) NULL, [LastName] [nvarchar](50) NULL ) ON [PRIMARY] GO EXEC sys.sp_addextendedproperty @name=N'MS_Caption', @value=N'First Name' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE',@level1name=N'Person', @level2type=N'COLUMN',@level2name=N'FirstName' GO EXEC sys.sp_addextendedproperty @name=N'MS_Caption', @value=N'Last Name' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'TABLE',@level1name=N'Person', @level2type=N'COLUMN',@level2name=N'LastName'
I created this view
/****** Object: View [dbo].[View_1] Script Date: 04/07/2008 14:50:32 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE VIEW [dbo].[View_1] AS SELECT FirstName, LastName FROM dbo.Person GO EXEC sys.sp_addextendedproperty @name=N'MS_DiagramPane1', @value=N'[0E232FF0-B466-11cf-A24F-00AA00A3EFFF, 1.00] Begin DesignProperties = Begin PaneConfigurations = Begin PaneConfiguration = 0 NumPanes = 4 Configuration = "(H (1[40] 4[20] 2[20] 3) )" End Begin PaneConfiguration = 1 NumPanes = 3 Configuration = "(H (1 [50] 4 [25] 3))" End Begin PaneConfiguration = 2 NumPanes = 3 Configuration = "(H (1 [50] 2 [25] 3))" End Begin PaneConfiguration = 3 NumPanes = 3 Configuration = "(H (4 [30] 2 [40] 3))" End Begin PaneConfiguration = 4 NumPanes = 2 Configuration = "(H (1 [56] 3))" End Begin PaneConfiguration = 5 NumPanes = 2 Configuration = "(H (2 [66] 3))" End Begin PaneConfiguration = 6 NumPanes = 2 Configuration = "(H (4 [50] 3))" End Begin PaneConfiguration = 7 NumPanes = 1 Configuration = "(V (3))" End Begin PaneConfiguration = 8 NumPanes = 3 Configuration = "(H (1[56] 4[18] 2) )" End Begin PaneConfiguration = 9 NumPanes = 2 Configuration = "(H (1 [75] 4))" End Begin PaneConfiguration = 10 NumPanes = 2 Configuration = "(H (1[66] 2) )" End Begin PaneConfiguration = 11 NumPanes = 2 Configuration = "(H (4 [60] 2))" End Begin PaneConfiguration = 12 NumPanes = 1 Configuration = "(H (1) )" End Begin PaneConfiguration = 13 NumPanes = 1 Configuration = "(V (4))" End Begin PaneConfiguration = 14 NumPanes = 1 Configuration = "(V (2))" End ActivePaneConfig = 0 End Begin DiagramPane = Begin Origin = Top = 0 Left = 0 End Begin Tables = Begin Table = "Person" Begin Extent = Top = 6 Left = 38 Bottom = 99 Right = 189 End DisplayFlags = 280 TopColumn = 0 End End End Begin SQLPane = End Begin DataPane = Begin ParameterDefaults = "" End End Begin CriteriaPane = Begin ColumnWidths = 11 Column = 1440 Alias = 900 Table = 1170 Output = 720 Append = 1400 NewValue = 1170 SortType = 1350 SortOrder = 1410 GroupBy = 1350 Filter = 1350 Or = 1350 Or = 1350 Or = 1350 End End End ' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'VIEW',@level1name=N'View_1' GO EXEC sys.sp_addextendedproperty @name=N'MS_DiagramPaneCount', @value=1 , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'VIEW',@level1name=N'View_1'
Plz help me to know whats wrong with following script:
EXEC sp_addextendedproperty @name = 'col_Programs_ID_Description', @Value = 'The Unique Identifier for a specific Program', @level1Type = 'Programs', @level2Type = 'ID'
I get the following error: Server: Msg 15600, Level 15, State 1, Procedure sp_addextendedproperty, Line 42 An invalid parameter or option was specified for procedure 'sp_addextendedproperty'.
NOTE: If I dont use the last 2 parameters this procedure runs fine, but it adds the Extended Property to the Database Level while I'm trying to add it to the TABLE-->COLUMN level.
Does anyone know of a good primer on extended properties and why I would want to use them. I have you the on-line books sections but that does a clear "why". I have search for white papers and similar documents.
I understand they are good for documentation, but I was looking for something that explain Microsoft long-term vision. How I might use them in template scripts, VSTS, etc.
Under SSMS I can add simple text and carriage returns to an extended property associated with a column. SSMS preserves the <CRLF> formatting that I used. But when I try to read this same text using, for example,
Hello, Can I read and write the extended properties with Access?
If it€™s possible is better create a project (ADP) or a classic MDB?
When I try with this query in the query panel (in a MDB)
SELECT objtype, objname, name, value FROM fn_listextendedproperty (NULL, 'schema', 'Person', 'table', default, NULL, NULL)
I have this error message:
The size of a field is too long
If I try with an ADP, when I ask a new query in design view, I have a message for some roblems between the Access version (2003) and SQL Server version (2005) and I can€™t save the query.
Hi!I have a user on my database that has only "select" access(db_datareader).Problem is, I also want him to also be able to create/update extendedproperties on tables or views, but without modifying the tables'schema.I played around with GRANT but apparently, a member of "db_datareader"cannot create/modify extended properties on an object if he's not theowner of this object. I tried making this user a member of"db_datawriter", but it didn't work.Nothing short of making him member of "db_ddladmin" worked... but thenthis is too much, the user can now alter to delete tables: i DON'T wantthat!Any ideas anyone? Cheers!Ben
"Object is invalid. Extended properties are not permitted on 'dbHSPS.dbo.Conflict', or the object does not exist."
However I can SELECT * FROM dbHSPS.dbo.Conflict and it returns results, and I know the test_me extended property exists for table "Conflict" in dbHSPS.dbo ...
When one deploys a CLR DLL that contains [SqlFunction]'s, Visual Studio creates three extended properties on the SQL function that is created: these are,
AutoDeployed, SqlAssemblyFile, SqlAssemblyFileLine. What I haven't found anywhere on Help or MSDN online is what these extended properties mean. Could someone enlighten me? 1. What is a description of the above properties? 2. What is the benefit of using them (clearly the function works without using them). Does it help debugging? 3. Does the developer need to manually keep for instance the SqlAssemblyFileLine in sync with changes in the .NET code?
I have documentation in the form of extended properties for tables which are subscribers in a replication scheme. The documentation describes the tables in reference to their replication scheme. I don't want to apply them to the source and have them published.I can't apply the extended properties receiving the error, 'don't have permission' yet I am DB creator on all systems. The theory is that I can't modify the subscription. Which makes sense.Can I turn off the replication, apply the extended properties, then turn on replication without causing harm?
I am trying to create a hard copy of all the table definitions in the database and have not found a way to do so. The report would have all the columns for a partcular table and each property assigned to the column. For instance Customers table has CustomerId, FirstName, LastName, Phone, etc. The CustomerId is PK, Identity, Auto Increment, BIGINT, NOT NULL. FirstName is NVARCHAR(30), NULL. LastName is NVARCHAR(30), NULL. Phone is NVARCHAR(20), NULL. Can anyone point me to the right system function or sp to get this info?
I store files in db in sql server 2008 by filestream. But when a column would be added to table which have filestream, properties of table would be changed. by every things change on table, retrieve files will faced to error. but store process work probably.
and filestream filegroup at following address will be empty. why?
Right click on table --> properties --> storage --> filestream filegroup
I have 2 tables: Order(ID, Quantity) and Product(ID,Name, Price) and I want to add a calculated field in Order table based on the price column in the Product table. How do i do that?
this query returns the values i want in the table.
select a.quantity * b.price from tblCustomerPurchases as a join tblProduct as b on a.ID=b.ID
Hi,I'm trying to import data to my database on the live server from my local server. However when I do this it doesn't seem to be importing the properties for the fields in the tables. How can I import the properties of the fields too?Thanks,Curt.
In my application, I have a master table that stores information about some other user tables. These other tables are all of different types, that is, the number and type of columns need not match across the user tables.
From the application perspective, logically each of these user tables is nothing but a column field within the master table.
I have seen references about "table" data type in SQL Server. It is possible to create a table that actually has a table data type as its field?
I want to store user-id and passwords in a table in SQL Server. But as passwords are very secure, I want to encrypt them while storing and may be decrypt them when reqd.
I want to store user-id and passwords in a table in SQL Server. But as passwords are very secure, I want to encrypt them while storing and may be decrypt them when reqd.
Have written stored procs to insert/update/drop column extended props but can't quite figure out how to drop all extended props for a particular table::column.
I have a date column that has 1/1/1900 entries and I want to write a formula..(i think)...in the column formula section that when this date is encountered, the column should show NULL. I don't know the syntax to use in the formula section of the column properties. Can anyone give some syntax examples.
I'm building a custom component and UI and am a bit confused on where I need to create and/or set custom column properties?
My UI will have a datagrid with three columns: 1) a check box to select a column for use by the component, 2) the input column name, and 3) a "differentiator" checkbox that indicates an extra property about some of the columns that have the first column checkbox checked (For example, my component may be using five input columns, but three of those need to be used in a slightly different way.)
The problem is, I don't understand when or where I'm supposed to create the custom property for the input column. SetUsageType is where I've been thinking, but I don't know if I'm supposed to be creating it for an input column or a virtual input column. I'd appreciate any guidance.
I am converting the contents of 64 lookup tables from individual tables (each called lookup_xxxxx) into a single LookupReference table. The individual lookup tables are my OLE DB Source objects. I want to derive the variable part of the lookup_xxxxx table name from the OLE DB Source 'OpenRowset' property as a variable and make it into a derived column (which will be the lookup Type column in the output table). For example, extract "SpeciesType" from the input source called 'lookup_SpeciesType' and put it into the derived column.
I cannot find a System variable that refers to the input data source. Does anyone know how I can do this?
I put togehter a package that opens a flat file, parses the data based on the semi-colon delimeter, and imports the rows into a database table. Thats the fun easy part.
What I cant figure out is how to add a variable that will hold a constant ID value that will be persisted with the same value to all rows inserted to the DB. Making the problem harder, I would like that this value be defined in a properties file or database table of some sort so that I can do a lookup based on the file name / location to find out what value should be used.
Any suggestions? I hope my explanation makes at least some sense - but basically I want to do a look up in a configuration of some sort, pull out a single value, and add it to a data import.
i have created the folowing function but keep geting an error.
Only functions and extended stored procedures can be executed from within a function.
Why am i getting this error!
Create Function myDateAdd (@buildd nvarchar(4), @avdate as nvarchar(25)) Returns nvarchar(25) as Begin declare @ret nvarchar(25) declare @sqlval as nvarchar(3000)
set @sqlval = 'select ''@ret'' = max(realday) from ( select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'
Hi guys, I need to get a column with the sum of the field "SUF" from table "JurnalTransMoves_1" when that field ("SUF") is ordered by the field "REFERENCE" from table "Stock", and Show the value only once.
The desired result should by something like:
Stock.REFERENCE JurnalTransMoves.SUF SUM(JurnalTransMoves.SUF) Group By Stock.REFERENCE
5752 10 60
5752 20
5752 30
5753 400 3000
5753 500
5753 600
5753 700
5753 800
5754 7 15
5754 8
Is there any chance to do that? Thanks in advance, Aldo.
Code Snippet SELECT Accounts.FULLNAME AS 'ACCOUNTS.FULLNAME', Accounts.ACCOUNTKEY AS 'ACCOUNTS.ACCOUNTKEY', Accounts.FILTER AS 'ACCOUNTS.FILTER', Accounts.SORTGROUP AS 'ACCOUNTS.SORTGROUP', AccSortNames.SORTCODENAME AS 'AccSortNames.SORTCODENAME', Accounts.CreditTermsCode AS 'Accounts.CreditTermsCode', CreditTerms.DETAILS AS 'CreditTerms.DETAILS' CreditTerms.CURRENF AS 'CreditTerms.CURRENF' CreditTerms.MONTH AS 'CreditTerms.MONTH', CreditTerms.DAYS AS 'CreditTerms.DAYS', CreditTerms.SHAREPRC AS 'CreditTerms.SHAREPRC', CreditTerms.TEMF AS 'CreditTerms.TEMF',
CASE WHEN CAST(Accounts.VatExampt AS int) = 0 THEN 'x' WHEN CAST(Accounts.VatExampt AS int) = 1 THEN 'y' ELSE 'Undefined' END AS 'VAT',
Stock.DOCUMENTID AS 'Stock.DOCUMENTID', DocumentsDef.DOCNAME As 'DocumentsDef.DOCNAME',
CASE WHEN CAST(Stock.DOCUMENTID as int) = 1 THEN Stock.DOCNUMBER WHEN CAST(Stock.DOCUMENTID as int) = 3 THEN Stock.DOCNUMBER WHEN CAST(Stock.DOCUMENTID as int) = 35 THEN Stock.DOCNUMBER WHEN CAST(Stock.DOCUMENTID as int) = 120 THEN Stock.DOCNUMBER WHEN CAST(Stock.DOCUMENTID as int) = 31 THEN Stock.REFERENCE WHEN CAST(Stock.DOCUMENTID as int) = 44 THEN Stock.REFERENCE WHEN CAST(Stock.DOCUMENTID as int) = 34 THEN Stock.REFERENCE WHEN CAST(Stock.DOCUMENTID as int) = 43 THEN Stock.REFERENCE WHEN CAST(Stock.DOCUMENTID as int) = 40 THEN Stock.REFERENCE ELSE '' END AS 'Invoice No',
Stock.VALUEDATE AS 'Stock.VALUEDATE', JurnalTrans.DESCRIPTION AS 'JurnalTrans.DESCRIPTION', JurnalTrans.REF2 AS 'JurnalTrans.REF2', JurnalTransMoves.SUF AS 'JurnalTransMoves.SUF', JurnalTransMoves_1.SUF AS 'JurnalTransMoves_1.SUF', JurnalTransMoves.TRANSID AS 'JURNALTRANSMOVES.TRANSID'
FROM JURNALTRANSMOVES AS JurnalTransMoves_1 INNER JOIN JURNALTRANSMOVES AS JurnalTransMoves INNER JOIN (SELECT DISTINCT JURNALTRANSID, RECEIPTSTOCKID, FULLMATCH, TABLFNUM, CKCODE, RSORT, RUSEFID FROM RECEIPTJURNALMATCH) AS ReceiptJurnalMatch_1 ON ReceiptJurnalMatch_1.JURNALTRANSID = JurnalTransMoves.ID INNER JOIN ACCOUNTS AS Accounts ON JurnalTransMoves.ACCOUNTKEY = Accounts.ACCOUNTKEY INNER JOIN JURNALTRANS AS JurnalTrans ON JurnalTransMoves.TRANSID = JurnalTrans.TRANSID INNER JOIN STOCK AS Stock ON JurnalTrans.STOCKID = Stock.ID ON JurnalTransMoves_1.TRANSID = JurnalTrans.TRANSID AND JurnalTransMoves_1.ACCOUNTKEY = Accounts.ACCOUNTKEY LEFT OUTER JOIN ITEMS AS Items INNER JOIN STOCKMOVES ON Items.ITEMKEY = STOCKMOVES.ITEMKEY INNER JOIN ITEMSORTNAMES AS ItemSortNames ON Items.SORTGROUP = ItemSortNames.ITEMSORTCODE ON Stock.ID = STOCKMOVES.STOCKID LEFT OUTER JOIN ACCSORTNAMES AS AccSortNames ON Accounts.SORTGROUP = AccSortNames.ACCSORTCODE LEFT OUTER JOIN CREDITTERMS AS CreditTerms ON Accounts.CREDITTERMSCODE = CreditTerms.CREDITTERMSCODE LEFT OUTER JOIN DOCUMENTSDEF AS DocumentsDef ON Stock.DOCUMENTID = DocumentsDef.DOCUMENTID
WHERE Accounts.SORTGROUP Between '3001' And '3020' AND Accounts.ACCOUNTKEY IN ('123456')
Can anyone help me with displaying several table properites at once. I know I can use sp_help 'tablename' to get one at time. What is the best method to get several databases at a time?
Hello. I just started using SQL Server Management Studio Express. I am creating a new table by right-clicking the "Tables" folder and selecting "New Table". Then i hit F4 to bring up the "Properties" (because I want to associate a Schema to the table, but when the "Properties" section appears, it's blank. I can't figure out a way to get anything to appear there. Any ideas? Thanks!...
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
