I was all set to build some triggers on some modified date tables when in the last minute I found out that the application (built in C#) was controlling the after update trigger.
Is there a tool you can use in SSMS to see if there is a connection set up like this?
Hi,
I have created a package where in i'm running a WMI script, which is running fine but i have one problem with it i.e every package status is being written to the application event logs that is every start and finish is recorded and this packege is being executed every 10 min. Hence the logs are getting huge and unmanageable. So is there a way in which we can avoid this writes to the App log??????
regards
hi, I'm trying to write to a database from a web page. The code is throwing back no errors but it just isn't writing to the database. Am I missing something? void SubmitDetails(Object s, EventArgs e) { SqlConnection objConn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"]); SqlCommand objCmd; objCmd = new SqlCommand( "INSERT INTO Member_Information (Name, Address_Line_1, Address_Line_2, Address_Line_3, Email_Address, Contact_Number, " + "Password, Name_Of_Bank, Account_Number, Sort_Code, Bank_Address_Line_1, Bank_Address_Line_2, Bank_Address_Line_3) " + "VALUES (@Name, @Address_Line_1, @Address_Line_2, @Address_Line_3, @Email_Address, @Contact_Number, " + "@Password, @Name_Of_Bank, @Account_Number, @Sort_Code, @Bank_Address_Line_1, @Bank_Address_Line_2, @Bank_Address_Line_3)", objConn); objCmd.Parameters.AddWithValue("@Name", txtName.Text); objCmd.Parameters.AddWithValue("@Address_Line_1", txtAL1.Text); objCmd.Parameters.AddWithValue("@Address_Line_2", txtAL2.Text); objCmd.Parameters.AddWithValue("@Address_Line_3", txtAL3.Text); objCmd.Parameters.AddWithValue("@Email_Address", txtEmail.Text); objCmd.Parameters.AddWithValue("@Contact_Number", txtContact.Text); objCmd.Parameters.AddWithValue("@Password", txtPassword.Text); objCmd.Parameters.AddWithValue("Name_Of_Bank", txtBank.Text); objCmd.Parameters.AddWithValue("Account_Number", txtAN.Text); objCmd.Parameters.AddWithValue("@Sort_Code", txtSort.Text); objCmd.Parameters.AddWithValue("@Bank_Address_Line_1", txtBA1.Text); objCmd.Parameters.AddWithValue("@Bank_Address_Line_2", txtBA2.Text); objCmd.Parameters.AddWithValue("@Bank_Address_Line_3", txtBA3.Text); objConn.Open(); objCmd.ExecuteNonQuery(); objConn.Close(); }
View 4 Replies View RelatedHi,
I've been searching the internet for hours and the code i'm finding is just not what i'm wanting to do. Heres the story, I have a database file "MyDatabaseFile.mdf" I am making a form when you click a button I want it to create the "MyDatabaseFile.mdf" in MS SQL Server. Is this possible if so how?
I it something like "CREATE DATABASE MYNAME?". I jsut want the MDF file i dont want the log file inserting or anything. Is there any tools out there that anybody can recommend that will help me with T-SQL?
Cheers,
Rob
I am trying to write to the Express SQL database using the My Movie Collection sample in VS2005. It seems to work fine while the program is running but when I restart the application all of the entries in the database are gone.
What do I need to do to actual put the data in the database?
Thanks
Hello, I am trying to update a few records in my table everything seems to work fine when I hit the submit button. But it does not acutally end up writing to the database... Can someone tell me if they see anything wrong with what I have for code? public void SaveData(){//declare sql connectionSqlConnection SQLConn = new SqlConnection();SQLConn.ConnectionString = base.m_CharterBase.GetSiteKey("EDCCConnectString");SqlCommand Cmd = new SqlCommand();//Open Connections SQLConn.Open();//Set command propertiesCmd.Connection = SQLConn;Cmd.CommandText ="Declare @ID as Int " +"UPDATE [TD_FSCL_PayPeriod] " + "Set [Quota] = @Quota, [LastChangeDate] = getdate(), [LastChangeID] = @LastChangeID, [LastChangeBy] = @LastChangeBy " + " where [ID] = @ID"; //Set parameter valueSqlParameter parmQuota = new SqlParameter();parmQuota.DbType = DbType.Int16;parmQuota.ParameterName = "@Quota";parmQuota.Value = txtQuota.Text; SqlParameter parmLastChangeID = new SqlParameter();parmLastChangeID.DbType = DbType.Int32;parmLastChangeID.ParameterName = "@LastChangeID";parmLastChangeID.Value = Master.curUser.User_ID;SqlParameter parmLastChangeBy = new SqlParameter();parmLastChangeBy.DbType = DbType.String;parmLastChangeBy.ParameterName = "@LastChangeBy";parmLastChangeBy.Value = Master.curUser.Domain_Login; //Add to parameters collectionCmd.Parameters.Add(parmQuota);Cmd.Parameters.Add(parmLastChangeID);Cmd.Parameters.Add(parmLastChangeBy); //Fire the queryCmd.ExecuteNonQuery();//Close ConnectionSQLConn.Close();} protected void btnSubmit_click(Object sender, EventArgs e){// run save method and then clear methodSaveData();clear_page();}
View 2 Replies View RelatedHi, I'm relatively new to SQL and ASP.NET and I'm after some assistance to what I hope is an easily achievable goal.
I need to upload some files (.pdf, .doc, .jpg - whatever) to a directory on my webserver. Once this has been done, I'd like to write some data to an SQL Database Table that will contain information about these files in a datagrid (or something similar) along with a link to download them.
E.g I upload car.jpg which is located at /images/secure/car.jpg and is a photo of car. When a user logs in, they will be shown a datagrid which pulls information from said SQL database and in this datagrid will be something like:
Filename Description Link
car.jpg A pic of a car Download
If anyone is able to help me out with regards to linking to a file from an SQL dB it would be greatly appreciated, and if you require any further information just let me know :)
Ben.
I am having an issue connecting to my database. I have copied the code below. I get no error messages, but my data is not getting written to the database. Can anybody help me figure what I am doing wrong. This is my first attempt at doing this in .NET. Thanks.
<%@ Page Language="VB" %>
<script runat="server">
Protected Sub btnFileUpload_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Try
' Get the HttpFileCollection
Dim hfc As HttpFileCollection = Request.Files
For i As Integer = 0 To hfc.Count - 1
Dim hpf As HttpPostedFile = hfc(i)
If hpf.ContentLength > 0 Then
hpf.SaveAs(Server.MapPath("MyFiles") & "" & Path.GetFileName(hpf.FileName))
Dim strConn As String = "Provider=SQLNCLI;Server=.SQLExpress;AttachDbFilename=|App_Data|tblFiles.mdf; Database=tblFiles.mdf;Trusted_Connection=Yes;"
Dim strsql As String = "InsertCommand=INSERT INTO [PruFiles] ([TheFileName]) VALUES ('" & hpf.FileName & "')"
Dim myconn As New OleDbConnection(strConn)
Dim myCommand As New OleDbDataAdapter(strsql, myconn)
End If
Next i
Catch ex As Exception
' Handle your exception here
End Try
End Sub
</script>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>ASP.NET 2.0 FileUpload Control Sample</title>
<link rel="stylesheet" type="text/css" media="screen" href="Stickman.MultiUpload.css" />
<script src="mootools.js"></script>
<script src="Stickman.MultiUpload.js"></script>
<script type="text/javascript">
window.addEvent('domready', function(){
// Use defaults: no limit, use default element name suffix, don't remove path from file name
new MultiUpload( $( 'myForm' ).myFileUpload );
});
</script>
</head>
<body>
<form id="myForm" runat="server">
<div>
<asp:FileUpload ID="myFileUpload" runat="server" />
<asp:Button ID="btnFileUpload" runat="server"
Text="Upload File"
OnClick="btnFileUpload_Click"
/><br />
<span id="Span1" runat="Server"></span>
</div>
<p>
</p>
<p>
</p>
<p>
</p>
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
DeleteCommand="DELETE FROM [PruFiles] WHERE [FileID] = @FileID"
InsertCommand="INSERT INTO [PruFiles] ([FileID], [TheFileName]) VALUES (@FileID, @TheFileName)"
SelectCommand="SELECT * FROM [PruFiles]"
UpdateCommand="UPDATE [PruFiles] SET [TheFileName] = @TheFileName WHERE [FileID] = @FileID">
<DeleteParameters>
<asp:Parameter Name="FileID" Type="Object" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="TheFileName" Type="String" />
<asp:Parameter Name="FileID" Type="Object" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="FileID" Type="Object" />
<asp:Parameter Name="TheFileName" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</form>
</body>
</html>
Also here is my web.config file:
<configuration>
<configSections>
<sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/>
<section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/></sectionGroup></sectionGroup></sectionGroup></configSections><appSettings/>
<connectionStrings>
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory| blFiles.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<httpRuntime
executionTimeout="200"
maxRequestLength="102400"
requestLengthDiskThreshold="256"
useFullyQualifiedRedirectUrl="false"
minFreeThreads="8"
minLocalRequestFreeThreads="4"
appRequestQueueLimit="5000"
enableKernelOutputCache="true"
enableVersionHeader="true"
requireRootedSaveAsPath="true"
enable="true"
shutdownTimeout="90"
delayNotificationTimeout="5"
waitChangeNotification="0"
maxWaitChangeNotification="0"
enableHeaderChecking="true"
sendCacheControlHeader="true"
apartmentThreading="false"/>
<compilation debug="false" strict="false" explicit="true">
<assemblies>
<add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/></assemblies></compilation>
<pages>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
<add namespace="System.IO"/>
<add namespace="System.Data.OleDb"/>
</namespaces>
<controls>
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></controls></pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<httpHandlers>
<remove verb="*" path="*.asmx"/>
<add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></httpHandlers>
<httpModules>
<add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></httpModules></system.web>
<system.codedom>
<compilers>
<compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="WarnAsError" value="false"/></compiler>
<compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4">
<providerOption name="CompilerVersion" value="v3.5"/>
<providerOption name="OptionInfer" value="true"/>
<providerOption name="WarnAsError" value="false"/></compiler></compilers></system.codedom>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<remove name="ScriptModule"/>
<add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></modules>
<handlers>
<remove name="WebServiceHandlerFactory-Integrated"/>
<remove name="ScriptHandlerFactory"/>
<remove name="ScriptHandlerFactoryAppServices"/>
<remove name="ScriptResource"/>
<add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/></handlers></system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/></dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/></dependentAssembly></assemblyBinding></runtime></configuration>
Hi Friends, Please any one help me in writing the code in thisI have 3 fileds1)empId-->textbox2)Roles-->4 radiobuttons(MN,PL,TL,CL)3)Responsibilities--->3 check boxes(profile,register,change password)I have 3 tablestable1:RoleMasterTable:roleID roleName1 MN2 PL3 TL4 CLtable2:ResponsibilityMasterTableresId resName1 profile2 register3 changepasswordtables3MasterTable:empId roleId resIdthe form conatains the empId,Roles(radiobuttons),Responsibilies(chechboxes)for example I have to enter empId=1select one radiobutton that is "PL"and I can select check boxes profile,register and manyafter submitting the button("submit) these details has to store in the database table i.e master tableI have to show the final o/p like this in the tableMasterTableempId roleId resId1 2 1,2Please any one help in this I am beginner in database c# programmingPlease its very helpful to me............Thanks & RegardsGeeta
View 7 Replies View RelatedHi
i get the following error whe writing to the db, what does it mean?
System.Data.SqlClient.SqlException: An explicit value for the identity column in table 'tbl_StudentInfo' can only be specified when a column list is used and IDENTITY_INSERT is ON. at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at ASP.Applicationform2_aspx.populateDb() in http://localhost/iris/Applicationform2.aspx:line 84
i am using the following code:
mycon.Open();
//string qry="insert into tbl_StudentInfo values ('"+Request.QueryString["Id"].ToString()+"','"+Request.QueryString["nam"].ToString()+"','"+Request.QueryString["surNa"].ToString()+"','"+Request.QueryString["DOB"].ToString()+"','"+Request.QueryString["addr"].ToString()+"','"+Request.QueryString["pCode"].ToString()+"','"+Request.QueryString["Cntry"].ToString()+"','"+Request.QueryString["email"].ToString()+"','"+Request.QueryString["ph"].ToString()+"','"+qualification+"','"+stdGPA+"','"+stdYear+"','"+Institute.Text+"','"+Tof.Text+"','"+subject+"','"+prrof.Text+"','"+""+"','"+todayDate+"')" ;
string qry="insert into tbl_StudentInfo values ('"+Request.QueryString["Id"].ToString()+"','"+Request.QueryString["nam"].ToString()+"','"+Request.QueryString["surNa"].ToString()+"','"+Request.QueryString["DOB"].ToString()+"','"+Request.QueryString["addr"].ToString()+"','"+Request.QueryString["pCode"].ToString()+"','"+Request.QueryString["Cntry"].ToString()+"','"+Request.QueryString["email"].ToString()+"','"+Request.QueryString["ph"].ToString()+"','"+qualification+"','"+stdGPA+"','"+stdYear+"','"+Institute.Text+"','"+Tof.Text+"','"+subject+"','"+prrof.Text+"','"+""+"','"+todayDate+"','"+RequestYear+"','"+""+"','"+""+"','"+"0"+"')" ;
myCommand = new SqlCommand(qry,mycon);
myCommand.ExecuteNonQuery();Response.Redirect("main.aspx");
}
catch(Exception e)
{
Response.Write(""+e);
}
the red line is line 84
PLEASE HELP
Can someone advise if there is a delay in data being written to the database following a tableadapter.update(datatable) command?
I save transactions which are subjected to the above and then a listview is updated to reflect them.
As I work through all is OK and the transactions appear in view.
I then run a backup through my app using a backup object to do this and this reports all OK
I then close the app and re-open and as as I am in debug the database is empty.
I perform a restore through my app using a restore object and selecting the backup file I created previoulsy which reports all OK
The retore procedure calls application.restart to allow the app to initialise to the restored data.
The problem is quite a bit of my data in missing from the restore as if the last block I did prior to backup never actaully made it to the database?
I also rememeber noting that at times when the update method is performed the actual timestamp on the physical databse is not updated....until I close the app and return to the designer?
So does this mean then prior to performing a backup I have to somehow force the app to ensure it has written all changes to the databse?
Thanks
I am trying to write to a database through C++ with the ODBC stuff. I can connect to and close the database as well as write certain things to it. I am having trouble writing strings or chars to it though. I'm not really a DB programmer and probably won't have to do it in C++ for a long time, so I'm just looking for some quick help so I can move on to other stuff. I know this code probably won't look right either since I;ve only seen this stuff for about 2 days now. Basically I have a string that I want to bind using SQLBindParameter so that I can use it in an ExecDirect statement. Basically when I run the little code snippet below, it writes some crazy character set out. Any help would be appreciated because I really have no clue what I'm doing.
SQLCHAR test1 = 'a';
SQLINTEGER test = SQL_NTS;
retcode = SQLBindParameter(hstmt, 1, SQL_PARAM_INPUT, SQL_C_CHAR, SQL_CHAR,0,0,&test1, 0,&test);
Hey all Im trying to make a system in which users logged on can change their password. I dont want to use a grid view because that dosent give me the chance to let them put in their old password first for validation but now I need a way of takeing data out of the textbox with the new password and placeing it in to the field in a database.As I stand at the moment I have a data.dataview variable equal to an SQL Data Source with my query in it, bringing back a record from a users table with the users username, password and a field stating what type of user they are. It filters this by username which is stored as a session variable and username is the primary key. there is then an if statement checking that the string in the password field is equal to what the user has written in the old password box and if they match it uses the command:dv.Table.Rows(0)(1) = txtNewPassword.TextMsgBox("Password Successfully Changed", MsgBoxStyle.Information)When I run this the validation successfully checks the password is correct and then displays the message box saying the password is correct but it hasnt actually changed it. Somone I know told me that I need to use the command sqldatasource.update but I cant see where it fits in. Anyone got any ideas?
View 2 Replies View RelatedHi Guys
In my project I need to write the data from an xml file to Database through a stored precedure.
On line a lot of help is available for writing data from Database to xml but I didnt see much info
about writing xml to database.
If any one could give me some code I will really appreciate it.(I am a newbee).
This application is developed using asp.net 1.1 and sql server 2005.
Thanks for your help in advance.
Halo, I am a bit new to this
Please can someone help me, I would like to write a file(Any type) to a SQL database like a attached document(s) for the current record and be able to detatch the document when needed.
I use VB.NET for a ASP.NET app.
I basicly would like to attach documents to a piece of equipment may it be any kind and if the user views the equipment he will be able to detatch the documents for that piece of equipment and open it with the correct software.
PLEASE HELP!!!!!!!
Hi Forum,
I am having a problem writing string values to my SQl database. I have the following code:
Dim pItemDescription As New SqlParameter("@itemdescription", o.ItemDescription)
cmdOrderDetails.Parameters.Add(pItemDescription)
o.Item Description returns the full string as a parameter but when it is written to the database it only writes the first letter in the database field. The column is set up as a VARCHAR with a a field length of 50 which is more than enough. Is there something I am doing wrong or missing out?
Thanks
Rich
Hi,
I have a data structure called 'Quote' which contains a number of different variables and controls ranging from text boxes, check boxes and radio buttons, i need to be able to read and write this from a database.
First I think a description of my overall project is needed:
Project Description
I have been given a brief that basically says: i have to create a programmed solution in VB to solve a problem. This problem can be anything we like, and I personally have chosen to create a program that manages quotes for building Log Cabins (this is very contrived and far from anything someone would do in the real world).
My solution will allow a generic user to create a quote (using a form with controls such as text boxes, check boxes, radio buttons) , and then save this to file. These users may then wish to load/edit this quote at a later date, from another form.
Whilst completing this project, i'll only have up to about 5 records (quotes) within the system, so i dont need the ability to store hundreds of records. And each record will be relatively short, with only about 10-15 data items within the data structure.
Also the Admin (or business owner in this case) need to be able to view all saved quotes in a presentable format, and edit them if needs be, from within this same program.
This solution does not need to be absolutely perfect and 100% efficiently coded, or have all the bells and whistles a real-world program would have. This is for an A level computing project by the way.
So basically, i need to be able to read from the database (to populate a Data Grid (i imagine this is best way?)) and so Admin can access any quote and edit it (editing is not vital, but viewing/printing is. Maybe i should stop at just viewing any quote?). Also i need generic users to be able to fill in the Edit Quote form and then save this data into the database.
And is a data structure really required for me to use a database?
I've never used databases in VB before (but have used them elsewhere, mainly Access) and so am completely new to this. Any help will be much appreciated.
Thanks
Hi,
I have created a package which uses the OLE DB Command as the target where I write the sql command to insert data into the table. The issue which I am facing is, while at the OLE DB COmmand , the package fails. I notices that it is not able to get the input columns which are mapped to the target columns.
The same package works fine when the target is on Oracle database or a SQL Server database.
For DB2, i have tried using the Microsoft OLE DB Driver for Db2, as the IBM DB2 Driver doesnt work for insert properly.
Any suggestion regarding this would be really helpful.
Thanks,
Manish
Hello!
I have created my self a person website in VS2008 using Linq and ahev downloaded a copy of sql express to use as my database when working on it at home.
I have just noticed, now I am trying to upload it to a server that my sql express is automatically creating the database in my app_data folder, this is causing me problems, as I don't want it to do this. I want it to be able to point it at a full version of SQL server.
Is there some setting I have missed? Of how can I stop tis automatic creation of the database?
Thanks
Bex
I need to just back one table and not all the data in the table. Is there away to have SQL save the data return from a query to some text file that Ican then use to build the table in another table on another server?I am SQL server 7Thanks,S
View 1 Replies View RelatedHello,
Is there any ability to do database-level triggers in SQL 2000? I have a SQL 2000 database, and I was asked if we could create a trigger that whenever anyone touches the data in a database, to create an entry in an event log? If not, I have a main table I can put a trigger on; however, my question is how do you write to a file in a trigger as well?
Thanks.
Hi All,
I have seen some different behaviors when I am writing SQL Server compact edition Database file into SD Memory card or any user removable storage media.
The following Steps for reproducing these behaviors.
1. Set your database location is in the SD Memory card.
2. Create a database and establish session.
3. Writing first record into the database is done
4. Remove your SD card manually from the system
5. Try to write a Second record into the database
6. You will get the error from this "SqlCeWriteRecordProps" API call - This is fine.
7. Put your SD card back into the system.
8. Writing Second record again into the database is done - This is fine.
So far the behaviors are good after that
9. Remove your SD card manually from the system again
10. Try to write a Third record into the database
11. You will suppose to get the error from this "SqlCeWriteRecordProps" API call but you won€™t get that error €“ I don€™t know why?
12. Then Try to write a Forth record into the database
13. You won't get any error from the API call "SqlCeWriteRecordProps" and return status is success.
14. Now put your SD card back into the system.
15. Then write Fifth record but this time its writing record Third, Fourth and Fifth into the database.
Note:
I am clearing (means Free) my record structure everything after calling this function "SqlCeWriteRecordProps". So I don€™t know why its wring Third, fourth and fifth record into the database.
Please Let me know your feedback.
Thanks,
Rajendran
Is there a way I can write a query to dynamically select a database table. That is, instead of having a variable for a certain column like customerId which would be €ścustomerID = @customerID€? I want to use the variable to select the table. I assume I may have to use a stored procedure but I am unclear as to how this would be coded.
Thanks
Hey everyone I've got this question that has me stuck for the last few days but its an important part of my website.....What I am trying to do is basicly have a user be able to upload a file, have that uploaded file plus some other info automaticly display on other parts of my site, and have a different user eventually be able to download that file....I have thought about allowing the file upload as a BLOB but still cannot find a proper way to execute this using VB, plus I have heard that this way of doing it is not reccommeneded cause databases were not designed to store large files like this, lots of articles recommened having the file upload to a Folder on your server then get the binary data for the file that can be placed in a database to refrence that particular file.....Well this also proves to be a lot harder then said here is what I got so far (written in C#) protected void UploadBtn_Click(object sender, EventArgs e)
{
if (FileUpLoad1.HasFile)
{
FileUpLoad1.SaveAs(@"C:Documents and SettingsAdamMy DocumentsVisual Studio 2005ProjectsWebsiteFiles" + FileUpLoad1.FileName);
Label1.Text = "File Uploaded: " + FileUpLoad1.FileName;
}
else
{
Label1.Text = "No File Uploaded.";
}
}
and here is the asp part of the code that goes with it<asp:FileUpLoad id="FileUpLoad1" runat="server" />
<asp:Button id="UploadBtn" Text="Upload File" OnClick="UploadBtn_Click" runat="server" Width="105px" />
<asp:Label ID="Label1" runat="server" Text=""></asp:Label>
Now from what I know is I need to get the binary of the file which I have read you can do with the Page.Request.Files statement but again not sure how I would impliment this. Does anyone have any suggestions on which way I should take when dealing with this should I try and just use the BLOB method or use the binary refrence method? and if so how would I impliment this, heck even some good tutorials on the subject would be great... Thanks.....Adam
let's say I have a table named "myTable" in a SQL database:
UniqueID
FirstName
FamilyName
1
Elizabeth
Moore
2
Chris
Lee
2
Robert
McDonald's
I want to create a SQL query should contain a parameter for example:
SELECT * FROM myTable WHERE UniqueID = @TextBox OR FirstName = @TextBox OR FamilyName = @TextBox,
and when I type in my TextBox the ' * ' character, it should retrieve the whole table...
hope anybody understood, will be happy to explain more.
Hai All ,
Iam having the one Application in DotNet2005.But iam using the two database(SqlServer2005).If user's login the application it will check credentials in first database, if he is not having the login credentials it will cheek the second Database. How can I handle in the configuration file?. How can I change the connection string depending upon the Database in my application for database operation (like insert and update).Any one kindly provide the solution.Thanks and regards,sureshK
Hi, I'm interested in how asp.net application communicates with MS SQL database. I mean, is communication encrypted or can it be? I have scenario where database and web application will communicate over Internet, they are not in the local network. Please share your opinions.
View 1 Replies View RelatedDear all
I am a pretty new in the development world fresh from uni. I am doing development on a system that has a security database. Access to the data in that database is pretty important. So in case the main server where the database is stored for soem reason fails or gets compromised i need to have a second copy with the most recent data in that database and keep the application up and running. The data i have is stored in a SQL 2005 database. What are the recomended aproaches for acheiving this needed reliability?
Would running the SQL Agent every 2 minutes do the trick? And replicate the database to another server and then have asecondary deployment on that server running as a backup? Or are there any other means?
Any advice is apreciated.
Sincerely
I have a vb application that uses sql server database , I want to move from sql server to msde file , wanna be able to attach msde file with vb app ,and run setup program
It looks like there is not much good info how to start with it
can anyone guide me ?
Thanks
hi
i m making a win application
for which i have used sql server 2005 .i faced a very big problem that i have made the database but i cannot able to connect the database with winn application .for this purpose i ned coding.so please help me.i need your help urgent.
sheraz
How can distribute an SQL database with my application in VB, does clickOnce may me do that? Should the final consumer install SQL Express Before installing my application. Can I create a unique package which may me do that?...
View 1 Replies View RelatedHello,
We just converted one of our commercial applications over to using SQL Server. We have a database that is about 700megs in size, what I want to know is how is one suppose to actually deploy a database in an automated install? I have created T-SQL insert scripts, but it is 764M in size, and it takes forever to read the script in to send to the SQL Server. So I am looking for suggestions on how to actually do this.
Thanks
Bern
Hey guys,
I'm really new to this so this might look dumb, but I need to know what all has to be done to develop a standalone database application.....The frontend is going to be on VC++...which are the best tools I'll need to use. I need to know if the user has to install the database app to use the program to make this possible......Also will he have to keep it running everytime to use the program.
Thanks a lot for you time and patience,
Dhaval