Running server 2003. I am running a program from home and am telneting in. When I leave for over 1/2 hour without inputting anything it disconnects me. How can I reset this setting to several hours befor it will disconnect me?
View 1 RepliesHello,
I was trying to telnet a remote server but I get following error message.
Connecting To "Remote machine address" Could not open a connection to host: Connect faile
Can anyone tell me what to do?
Hi,
I used Microsoft SQL server 2000 on Microsoft Windows Server 2003 for database server and used Redhat Linux Enterprise for Web server.
I wrote the PHP script (on Redhat) connect to database server, its does not work. And then I install freetds on Web server but not work too.
I have problem not be solve...
- on Redhat, cannot telnet x.x.x.x 1433 to database server. But telnet to other port is success.
- on database server, cannot telnet x.x.x.x 1433 and telnet 127.0.0.1 1433.
- between web server and database server can used ping !
- I used command 'netstat -an' on database server is not show for 1433 port.
please help me... :eek:
I have just been able to configure remote connection on SQL 2005. I can also access the AdventureWorks database remotely via ODBC on port 1433. The install directions of a some software instruct me to do telnet <hostname> 1433 to check for connectivity. It doesn't work! I gave my instance the name RM and I also tried telnet <hostname>RM 1433 but again failed.
When I try just telnet <hostname> it works.
Can anyone help?
hello
How can we Connect the SQL server Via TELnet.
Client system at LAN "A"........
Sql Server Instance at LAN "B".....
So, how can i connect these two , along with how to send the Querries to sql Server at Lan "B" inorder to retrive from the server to Client......
Can Anybody help in this regard and give a small details / give a path to find out this..
Thanx in Advance..........
I'm working on a completely virgin install of SQL Server 2k in Windows 2003.
Just after install I check that the TCP/IP protocol is enabled under the
server properties and then I try to Telnet into port 1433. On this one
particular box I get back the following:
C:>telnet localhost 1433
Connecting to localhost...Could not open connection to the host, on port
1433: Connect failed.
For comparison I tested telnet on a couple other machines and I get back a
blank window ready for my commands, as I'd expect.
I've checked the firewall settings and other IP Filtering settings to see if
any of those were blocking traffic to 1433... nothing. I've triple checked
the SQL Server settings for any "problems" and nothing jumps out at me.
Any ideas how I can I block telnet connections to SQL Server ports ?
Does anybody have a job where it will disconnect certain users from the database
What I would like to do is schedule a job that will run at 11:00pm that will disconnect certain users (not all of them). This program should also kill any jobs that these users may be running.
I running into a problem occasionally, where a certain program hangs up and will not release its DB locks. This then keeps a couple of the nightly batch jobs from running.
(I run on SQL SERVER 7.0 on a NT server)
Matt Atkinson, mratkinson@www.com
I'm trying to detach my database.But i couldn't do that coz there are some users connected to it. So how can i disconnect them?is there any way to disconnect them from the DB?
Thanks.
Is there a way to forcibly disconnect users from a db with t-sql? I'm doing a nightly restore of a db and users who shouldnt remain connected after hours, are. So I cannot restore the db unless I disconnect them as the db cannot be obtained for exclusive access.
Any thoughts on this?
Edward Hunter, Data Application Engineer
comScore Networks
Dear All,
i've to drop one database....i'm sure....
but it is saying presently it is in use....
there no no replication....
some user is using....
that is a new database.....how can i throw all users from the database
Vinod
Even you learn 1%, Learn it with 100% confidence.
Hi All
IF some users are still connected to the database and I want to shutdown the server How can I disconnect them in order to shutdown.
Sincerely.
The package has 15 DTS 2000 tasks that execute sequentially, depending on 15 successes. The 15th task then invokes 11 more DTS 2000 tasks simultaneously which each invoke a mail task on their success. The package is saved as part of a valid project. The entire package is successful executing within Visual Studio -- 37 green boxes. I move the package as file system .dtsx to my database as a stored package within MSDB and then schedule it as a job via SQL Agent invoking the MSDB stored package.
The package has a log file referenced in the scheduled job for errors and diagnostics while each of the 26 Transforms Data Tasks within the DTS 2000 packages writes to a fully qualified exception file on my server. The log and exception files have valid data when the package runs in Visual Studio but the exception files are untouched when the job fails and the log only references one of the 11 dependent steps with a job failed message. SQL tables are updated and files created from the Visual Studio execution but nothing is created when the job fails.
I am assuming there is a disconnect with the way I am moving the package to the scheduled job but I don't know what the problem is. Can anyone help?
Den
Hello,
I need to attach and detach 50 DB's, for which I have wrote a simple script. How can I make sure that there are no connections or users connected to the DB's, if there any users how can I forcefully disconnect them.
Thanks
Dakki
I've written a query calling for the max disconnect date within a table, but I would also like to make sure to only retrieve records with the most recent connect date. I'm unsure how to go about adding the additional max date function to my query. Here's what I have written:
select distinct T.PRIN_MON, T.AGNT_MON, T.SUB_ACCT_NO_MON, T.TRAN_DTE_MON, T.TRAN_CDE_MON,
T.TRAN_AMT_MON, EQ.eqp_stat_eqp,
case when h.acct_stage_ohi = 'v' then 'VOL_DISCO'
when h.ACCT_STAGE_OHI = 'n' then 'NON_PAY_DISCO'
ELSE '' END AS 'CUSTOMER_STATUS',
[Code] ....
I am building a package that will be used to transfer data from Access 2000 to SQL 2005. For development purposes, the first thing I do is search for my SQL database. If it is there, I drop and recreate it. If I run the package once, it runs fine, . After that, I get the message that the database is in use and can not be deleted. I do not have Mgmt Studio open, so the only thing that could have a connection is the BI Studio. The only way I can seem to clear it, is to close and reopen BI Studio and the package. To make matters worse, it does not happen all the time. So sometimes I can run the package as many times as I would like, until it chokes, and then I get to start all over again. Has anyone else seen something like this, or am I missing something in the package and/or task settings? Please let me know.
Thanks,
DO
I need a script to kill existing sessions on [db1] and [db2] except sessions from [user1]. I have a script like this now:
USE master
GO
DECLARE @kill varchar(8000) = '';
SELECT @kill = @kill + 'kill ' + CONVERT(varchar(5), spid) + ';'
FROM master..sysprocesses
WHERE dbid = db_id('db1)
EXEC(@kill);
I just need to extend to run on db2 and don't kill sessions from user1
Hi,
I have a SSIS Package which I would like to modify using SSIS API. I need to put new component between some two existing data flow's components. During this process I need to disconnect two data flow's components using SSIS API. How can I do that?
Thanks,
Rafal
I have issued a simple insert statement on table and the statement could not insert a single row into the table.When i check the locks on the tables i found that almost 5000(five thousand) locks on the table for a single user with different SPID(s).
The user is and sql server user(not a windows user) and used to connect to the application.I wanted to disconnect the user from the DB so that all the locks will be freed.But i dunno how to disconnect a user from the DB. I know that i can issue KILL command to Terminate a user process based on the system process ID,but here the same user has nearly 1000 SPIDs.I thought that it would be very big job to kill each and every process and restared the sql server.but i guess its not the correct process to do.
how can i dosconnect a specific user from the DB.
Thanks.
Every day between 1AM to 2AM client disconnect happens and it's not too long also...it's about 30secs...nothing is recorded from SQL side and application server side and then we checked the network...there is no disconnect from network side too. How can i find the cause for disconnect.
View 4 Replies View RelatedI'm having a strange problem with this but I know (and admit) that the problem is on my PC and nowhere else. My firewall was causing a problem because I was unable to PING the database server, switching this off gets a successful PING immediately. The most useful utility to date is running netstat -an in the command window. This illustrates all the connections that are live and ports that are being listed to. I can establish a connection both by running
telnet sql5.hostinguk.net 1433 and
sqlcmd -S sql5.hostinguk.net -U username -P password
See below:
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1026 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING
TCP 81.105.102.47:1134 217.194.210.169:1433 ESTABLISHED
TCP 81.105.102.47:1135 217.194.210.169:1433 ESTABLISHED
TCP 127.0.0.1:1031 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51114 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51201 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51202 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51203 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51204 0.0.0.0:0 LISTENING
TCP 127.0.0.1:51206 0.0.0.0:0 LISTENING
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1025 *:*
UDP 0.0.0.0:1030 *:*
UDP 0.0.0.0:3456 *:*
UDP 0.0.0.0:4500 *:*
UDP 81.105.102.47:123 *:*
UDP 81.105.102.47:1900 *:*
UDP 81.105.102.47:5353 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1086 *:*
UDP 127.0.0.1:1900 *:*
Both these utilities show as establishing a connection in netstat so I am able to connect the database server every time, this worked throughout yesterday and has continued this morning.
The problem is when I attempt to use SQL Server Management Studio. When I attempt to connect to tcp:sql5.hostinguk.net, 1433 nothing shows in netstat at all. There is an option to encrypt the connection in the connection properties tab in management studio, when I enable this I do get an entry in netstat -an, see below:
TCP 81.105.102.47:1138 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1139 217.194.210.169:1433 TIME_WAIT
TCP 81.105.102.47:1140 217.194.210.169:1433 TIME_WAIT
Amost as if it's trying the different ports but you get this time_wait thing. The error message is more meaningful and hopefull because I get:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (.Net SqlClient Data Provider)
I would expect this as the DNS has not been advised to encrypt the conection.
This is much better than the : Login failed for user 'COX10289'. (.Net SqlClient Data Provider) that I get, irrespective of whether I enter a password or not.
This is on a XP machine trying to connect to the remote webhosting company via the internet.
I can ping the server
I have enabled shared memory and tcp/ip in protocols, named pipes and via are disabled
I do not have any aliases set up
No I do not force encryption
I wonder if you have any further suggestions to this problem?
I want to be able to list all users connected/logged in a specific database and disconnect them all or a certain user.
can this be done in SQL and if so how?