is it possible to retrieve data from a #temp table in flow control task? or create a temp table perhaps?
or what if i create a table in the control flow using sql execute task and inside the data flow access that table, is that possible?
I have a series of data flow tasks that I want to output to a temp table. I've set the data source for RetainSameConnection and the Data Flows are DelayValidation. The OLE DB data source inside the Data Flow works fine, but the data destinations don't offer a # or ## as a target. I've tried every destination that sounds logical, without success.
Any pointers? ... Thanks!
Hi
Folx,
I
am new to SQL Server and I am struggling.
Versions:
Microsoft
SQL Server Integration Services Designer Version
9.00.1399.00
Microsoft
SQL Server Management Studio 9.00.1399.00
I
would like to
01.
create a temp table
02.
load the temp table from a flat file
03.
insert into a destination table the rows from the temp table where NOT EXIST the
primary key of the destination table.
ISSUES:
Flat
File Source will not accept that a resource will be available that does not yet
exist (the temp table)
I
set the Flat File Source to €œIgnore Failure€? and ran the package. It ran with
warnings but did not insert the new rows.
The
€œIgnore Duplicates€? radio button is €œgrayed out€? because the index is clustered
Now
I could work around this thing by keeping a table just for purposes of this
process flow. I am opposed to that philosophically and would prefer to do this
in the way that I consider appropriate€¦is there a solution?
Thanks,
Bill
Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIf on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1]  and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
I have a temp table like this
CREATE TABLE #Temp
 (
  ID int,
  Source varchar(50),
  Date datetime,
  CID varchar(50),
  Segments int,
  Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
Hi, all experts here,
Do we always have to use SCD component for the loading of data into data warehouse to handle changes of rows?
I am looking forward to hearing from you and thank you very much in advance for your help.
With best regards,
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
how I can load the CSV file data into the sql server table. I know there are ways like bulk insert and other to load the csv file data into the table. But in my case the table doesn't exist and has to be created at the run time. With simple insert in temp table we do like select * into #temp from tablename and that creates the temp table. So. I need something like that which create the temp table and load the data into it. because the CSV file would have different number of columns and names so I can not create the table structure in advance. I have to create the table at run time.Â
View 3 Replies View RelatedHello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary  (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
I am having trouble getting data from a temporary table into a asci text file. How would I go about doing that using bcp, dts, or bulk insert?
View 1 Replies View RelatedIs it possible to look at the entries in a temporary table when stepping through a procedure?
View 1 Replies View RelatedHi all
I have this snippet of data
hierId nodeId nodeName parentId childId
----------- ----------- -------------------------------------- ----------- -----------
437 1582275 Accountants 1582270 1582275
437 1582276 Asset financiers 1582270 1582276
437 1582270 Banking & financial institutions NULL NULL
437 1582286 Private banks 1582277 1582286
437 1582277 Banks 1582270 1582277
I want to loop through this data and put the results into a temp table so it looks like this:
hierId nodeName ids
------------------------------------------------------------------------------------------------------
437 Banking & financial institutions -> Accountants1582270 | 1582275
437Banking & financial institutions -> Asset financiers1582270 | 1582276
437Banking & financial institutions -> Banks1582270 | 1582277
437Banking & financial institutions -> Banks -> Private banks1582270 | 1582277 | 1582286
437Banking & financial institutions1582270
Can anyone help me with achieving this
Thanks in advance
I am building a dynamic query stored procedure. I am first filling a temp table with data:
Declare
@Counter int
drop table #tempmerge
create table #tempmerge(IDIndex int IDENTITY, CitationNum char(9),Exp1 int)
insert into #tempmerge
Select E_Cit_For_Merge, Count(*) as Exp1
from dbo.E_Citation_XML_Data
group by E_Cit_For_Merge
having Count(*)>1
select * from #tempmerge
Results returned from #tempmerge table:
IDIndex CitationNum Exp1
----------- ----------- -----------
1 4AA020621 2
2 4AA022361 2
3 4AA022391 2
4 4AA022423 2
5 4AA022532 3
6 4AA027761 2
7 4AA030513 2
Then, I want to use a while loop, looping thru the #tempmerge table
and retrieving the CitationNum value of each row:
set @RowCount = (Select Count(*) from #tempmerge)
set @Counter = 1
While @Counter <= @RowCount
Begin
Set @WhereStatement2 = ' where E_Cit_For_Merge= (Select CitationNum from #tempmerge
where IDIndex = @Counter)'
E_Cit_For_Merge is a field in a SQL table.
I Declare @Counter as int.
I get the Error message that:
FROM E_Citation_XML_Data where E_Cit_For_Merge= (Select CitationNum from #tempmerge
where IDIndex = @Counter)
Server: Msg 137, Level 15, State 2, Line 24
Must declare the variable '@Counter'.
Any Suggestions?
Thanks
JEB
Not sure if you can help on this but Ive got a stored procedure in sql server and it creates a temp table. I then call another stored procedure from this one. When it returns to the 1st stored procedure I want the temp table to keep the information entered into the table, but the data is lost.
Is there a flag that can be turned on and off do this?
Or can you suggest anything else
Regards
Steve
Steve Fouracre
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
Hi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Create table scripts (
UserID int,
UserName char(50),
ScrRan char(50),
StartTime datetime default getdate(),
EndTime datetime);
Create table errors (
ID int,
UserName char(50),
UserLogin char(50),
ErrorNumber int,
Message char(100),
TimeOfError datetime default getdate());
declare @error int
declare @msg varchar(100)
declare @startTime datetime
declare @endTime datetime
select @startTime = getDate()
SELECT *
INTO #Temp
FROM Publisher
WHERE pub_Name = 'Scene Publishing'
UPDATE #Temp
SET pub_Name = UPPER(pub_Name)
SELECT *
INTO Publisher
FROM #Temp
--Begins Error Checking Routine
select @error = @@error
IF @error <> 0
BEGIN
select @msg ='error: ' + convert(varchar(7), @error) +
''
insert into errors values (@@SPID, USER, USER_NAME(), @error,
@msg, getDate())
END
ELSE
BEGIN
select @endTime = getDate()
insert into scripts values (@@SPID, SYSTEM_USER, @startTime, @endTime)
END
select * from errors
select * from scripts
lost and loaded.
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master
UPDATE [dbname].dbo.table
SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1
WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2
AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3
AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
What is wrong?
Hi all,
I'm just testing an SSIS package and am having issues with dealing with locked records.
my situation is as follows:
my source table is oracle, my destination table is in SQL server. my data flow is a very simple update with a lookup transformation and then two OLEDB commands for update and insert.
On each of the OLEDB commands I have set the "command timeout" to 5 seconds (just for testing purposes). also each OLE DB command has a failure path that outputs to a flat file. I'm expecting that if the destination table/records is/are locked then after 5 seconds the record will be output to the flat file.
so to test this I begin a transaction on the destination table and don't commit it. then I start the SSIS job. it doesn't appear to even get to the OLE DB commands. it appears to stop at the beginning of the data flow task. the output window shows this:
"Information: 0x40043007 at Import from Phoenix, DTS.Pipeline: Pre-Execute phase is beginning."
but it just hangs there indefinately. the progress tab tells me that it get's from the validating stage and past the prepare for execute stage but hangs on pre-execute - 0 percent.
I've put the command timeout = 5 on everything that I can find. I've mucked arround with all the possible "validateExternalMetadata" properties even though I only guessed that it may be the cause. is there anything that I'm missing? where should I look next?
(yes it does work perfectly when there is no transaction locking the target table)
Cheers,
Andrew
Hello. I have a SP. I am passing two variables to it that are comma seperated lists (ids) so that I can use an IN clause. But since I cannot use these CSV in an IN clause directly I wrote a temp table that first parses the CS list and creates a temp table with a single column of IDS.Then in a second temp table I am selecting the data using enrollment_id IN (Select enrollment_id From #temptable)Then the SP selects data from the second temp table.This works exactly the way it is supposed to work. But when I call the SP from ASP.NET it doesn't return any data. I just cant seem to return data by selecting from a temp table. And my ASP.NET code is correct because I commented out everything and just returned the parameters I was passing and that worked. So does anyone know how to select data from a temp table in a SP when executed from ASP.NET?I even tried Table Variables and same thing. It works great in SQL but when called from ASP.NET it doesnt return any data. I am guessing it's probably losing its scope. Any quick help would be appreciated. Thank you.Here is a snippet of the SP (even this fails):CREATE PROCEDURE [dbo].[returnEnrollments](@organization_id int, @test_item_list ntext, @enrollment_list ntext)As--select @test_item_list as tilist, @enrollment_list as elistDeclare @report_start_date datetime;Declare @report_end_date datetime;Declare @test_item_id_list varchar(8000);Declare @enrollment_id_list varchar(8000);DECLARE @TestItemID varchar(10), @Pos intDECLARE @EnrollmentID varchar(10)--Set @IDList = @test_item_id_list;--Set @EnrollmentIDList = @enrollment_id_list;Set @test_item_id_list = Cast(@test_item_list As varchar(8000))Set @enrollment_id_list = Cast(@enrollment_list As varchar(8000))Select @report_start_date = report_start_date, @report_end_date = report_end_date From organization Where organization_id = @organization_id;-- Create a temp table to store all the enrollment idsIF OBJECT_ID('tempdb..#EnrollTemp') IS NOT NULLDROP TABLE #EnrollTempCREATE TABLE #EnrollTemp (enrollment_id int NOT NULL)SET @enrollment_id_list = LTRIM(RTRIM(@enrollment_id_list))+ ','SET @Pos = CHARINDEX(',', @enrollment_id_list, 1)IF REPLACE(@enrollment_id_list, ',', '') <> ''BEGIN WHILE @Pos > 0 BEGIN SET @EnrollmentID = LTRIM(RTRIM(LEFT(@enrollment_id_list, @Pos - 1))) IF @EnrollmentID <> '' And @EnrollmentID > 0 BEGIN INSERT INTO #EnrollTemp (enrollment_id) VALUES (CAST(@EnrollmentID AS int)) --Use Appropriate conversion END SET @enrollment_id_list = RIGHT(@enrollment_id_list, LEN(@enrollment_id_list) - @Pos) SET @Pos = CHARINDEX(',', @enrollment_id_list, 1) ENDENDSelect top 20 * From #EnrollTemp Edit: Just used a DataReader instead of a datatable and it works. Dont know why it would fail with a datatable.
View 4 Replies View Relatedhi all
i am displaying some information in a datagrid as part of shopping cart.i want to store the informations which i displayed and some informations
which the user enters in a temporary table, so that i can perform manipulations based on that.
how can i do that?
how to load those informations into a temporary table during runtime
can anyone explain me in detail? please
thanks in advance
i am using sqlserver2000
vb.net2003
Hi,
I could use some help on how to save the result of my data-flow in an existing table.
I have created a data flow. I have no trouble storing the result of the flow in a new table. But I'm trying to store the result of my data flow in an existing table. (The flow involves fuzzy grouping, and i would like to store the result in the original table on which the fuzzy grouping was performed). But I cannot get it to work.
I can select the existing table as OLE DB destination. I can write an SQL to manipulate this table, but how do i address the result of the flow in the SQL?
Help is welcome here!
I have a dataset that was created via a source + lookups + derived columns.
I wish to take this dataset and treat is as a table within a sql statement so that I can update a permanent table with the a specific value within the temp dataset.
In sql this is what I am trying to do:
SELECT COUNT(*) AS Count_of_Employees, DEPT
FROM Employees
GROUP BY DEPT
UPDATE Departments
SET Number_of_Employees = Count_of_Employees
WHERE Dept = dept.
How do I tell the destination of the dataflow to use the stage table that has not been created yet?
View 9 Replies View RelatedHello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
In Access, I can import a txt file data(e.g. Claims.txt) as below specifications:
Choose the delimiter that separates your fields: Other (|)
First row contains field name: Yes
Text Qualifier:"
I need to create a store procedure to read txt file data (d:cliamcliams.txt) first column (ClaimNumber) into a temp table (#claim)
(This #claim table will use for my .Net program)
There about 5 txt files need to process every day.
I want to insert data (month&year) from 2014 till now - into temp table using 2 while loop.
drop table #loop
create table #loop
(
seq int identity(1,1),
[month] smallint,
[Year] smallint
For some reason I cant not get 2015 data .
Hi, All,
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
Thanks in Advance
I am transferring data from oracle and getting below error message.
I using 4 data flow tasks with in a single control flow and all the 4 tasks quueries same table but populates data in to different sql tables based on the where contidion
[OLE DB Source 1 [853]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "ORA-01652: unable to extend temp segment by 64 in tablespace TEMP ".