i have problem when i run stored procedure.
"Could not allocate space for object '(SYSTEM table id: -594960911)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full."
can i change physical device "tempdb.mdf" and "tempdb.ldf" from drive c: to drive d:.
tx be4,
andi
Hi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
Hi All,
I get this error message randomly when running a stored proc that creates a bunch of temp tables with indexes. Select/Into temp tables are also done. Has anyone seen this before? Thanks.
I/O error (bad page ID) detected during read of BUF pointer = 0x14e1dbc0, page ptr = 0x7904e000, pageid = (0x1:0xdaaa), dbid = 2, status = 0x801, file = D:MSSQL7DATATEMPDB.MDF. [SQLSTATE HY000] (Error 823). The step failed.
Dear all,
I found an error in my NT server event log viewer that related to SQL server tempdb. The error detail is as follow:
Error Source: MSSQLServer
Type: Error
Category: Server
Description: "Error: 9002, Severity: 17, State:2"
"The log file for database 'tempdb" is full. Back up the transaction log for the database to free up some log space"
I am just wondering what is the cause of the problem and what should I do next to get rid of this problem.
Appreciated it if you can give me some idea what's the impact for this error and how to fix this problem.
Thank U very much,
Cheers,
Chris Fung,
What should be size of tempdb.
I am daily getting tempdb translog is full error.
Then i need to dump the transaction with dump traan.... with no log.
After this only server working fine.
Any solution please...
Thanks in Advance.
Selvam
On out SQL 6.5 server we keep getting error 1105;
Can't allocate space for object '-486' in database 'tempdb' because the 'system' segment is full.
This seems to suggest that tempdb is not large enough. However I can't see how to expand the database larger than the current 6mb. I can only expand the log, and have done so to a 1000mb. Still keep getting the same error.
Any suggestions ??
Hello friends..
We are getting below error every day.we have job Shrink TempDB which runs every hour..but once a day we are getting this error.Is this error becasue of other jobs also running by that time which uses huge resource from DB..I cant understand why???.. can any body have an idea??
Executed as user: NT AUTHORITYSYSTEM. ...97031). The PageId in the page header = (1:1056620160). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297030). The PageId in the page header = (1:-1839155936). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297029). The PageId in the page header = (1:1057229472). [SQLSTATE 42000] (Error 8909) Table error: Object ID 0, index ID 0, page ID (1:297023). The PageId in the page header = (0:0). [SQLSTATE 42000] (Error 8909) Table error: Object ID 0, index ID 0, page ID (1:297022). The PageId in the page header = (0:0). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297021). The PageId in the page header = (1:1056467424). [SQLSTATE 42000] (Error 8909) Table error: Object ID -720718983, index ID 0, page ID (1:297015). The PageId in the page header = (2:1071640160). [SQLSTATE 42000] (Error 8909) Table error: Object ID -7207189... The step failed.
Papillon
I am using 6.5 .
Here is the error that i get
Think that tempdb is small how do i change that or what is this error about'
--------------------------
AIMSMan
---------------------------
Application-defined or object-defined error 40002
37000: [Microsoft][ODBC SQL Server Driver][SQL Server]Can't allocate space for object '##RevByNetSALIMJUMMA' in database 'tempdb' because the 'default' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.( 1105)
ODBC
I only have data and log device how do i increase the tempdb device
let me know
SEJ
Can anyone help please?
I am getting the following error:
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 162781324115968' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
Msg 9002, Level 17, State 4, Line 1
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Regards,
Krishna
*Learning IT from experience*
I keep getting the following error message when I run a serie of SQLcommands:Server: Msg 9002, Level 17, State 6, Line 15The log file for database 'tempdb' is full.Back up the transaction log for the databaseto free up some log space.I have tried "dump transaction tempdb with no_log" right before I runthe SQL command. But that doesn't help.The serie of SQL commands that I try to run is the following:create table #NewBatOp(BatchJournalID uniqueidentifier not null,batch_nr varchar(5) null,OperationNum varchar(3) null,OperationHours real null,EmployeeNum varchar(6) null,OperationDate datetime null,IsOverTime tinyint null)-- |-- Comment this one line-- | out will not triggerinsert into #NewBatOp -- <---| the errorselectbj.BatchJournalID, bj.batch_nr, bo.opno,bo.hrs, bo.bonno, bo.dat, bo.otflgfrom batop boinner join BatchJournal bj onbo.bat = bj.batch_nr andbj.BatchJournalID in(select BatchJournalID from BatchControl)if ( @@error <> 0 )goto OnErrordrop table #NewBatOpgoto EndTestOnError:drop table #NewBatOpprint "Error: Failed to import new batch-operations intojournal."EndTest:I have tried running the above statements in ISQL and in QueryAnalyzer, and I get the same error.I didn't have this problem before I have moved the database from oneserver to another server.- The OS in the old server is Windows-NT,and the SQL Server in the old server is the 2000 version.- The OS in the new server is Windows-2000,and the SQL Server in the old server is the 2000 version.The settings in tempdb in both servers are more or less the same.Actually, the tempdb in the new server is actually much bigger thanthe one in the old server. The size of the transaction logs in bothserver are the same (and cannot be changed manually). Both the dataand the transaction log of tempdb can automatically grow in 10%increment and no restriction on size.The data-and-log of the tempdb are both in one hard disk. The harddisk has 10-GB free space available. Moreover the size of the resultset from the "select" statement above is only 530KB (around 3000 rowsin the result-set). I believe it is a very small database operation.Therefore, I don't think the size has anything to do with the error.I don't think the "inner-join" clause is the cause of the problem. Thereason is that I have used the same "inner-join" clause in otherqueries, and they don't have any problem. As a matter of fact, I haveused many other queries that are far more complicated and have createdmuch bigger result set in tempdb, and they don't have this problem.I am very puzzled of this error. Can someone give me a pointer?Thanks in advance for any info.Jay Chan
View 10 Replies View RelatedDuring the night I run a checkdb that reported a error in tempdb, log down in post for more info.
Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 0, text ID 296853831680 is not referenced.
If run a checkdb know it€™s not finding any problem. I€™m bit confused what to do restart the server to get new tempdb? I check with for SQL Server 2005 Books Online for the €œMSSQLSERVER_8974€? error, it tells me to look after a €œLook for Hardware Failure€?. In the sql server log its stands that its have found 82 errors
DBCC CHECKDB (tempdb) executed by AIR5MSSQLService found 82 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 3 seconds.
Directly after this a stackdump are generated. Somewhere in the middle of my dbcc script.
After the i get the result of the next databases.
DBCC CHECKDB (model) executed by AIR5MSSQLService found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 0 seconds.
This is compress version of the log of dbcc job
NEW COMPONENT OUTPUT
Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3042
Report was generated on "FLEFSE".
Maintenance Plan: Underhåll
Duration: 00:12:55
Status: Warning: One or more tasks failed..
Details:
Check Database Integrity (FLEFSE)
Execute TSQL on Local server connection
Execution time out: 1800
Task start: 2007-12-05T02:00:01.
Task end: 2007-12-05T02:12:57.
Failed-1073548784) Executing the query "DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT name FROM sys.databases WHERE state_desc='ONLINE'
OPEN AllDatabases
DECLARE @DBNameVar NVARCHAR(128)
DECLARE @Statement NVARCHAR(300)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
WHILE (@@FETCH_STATUS = 0)
BEGIN
PRINT N'CHECKING DATABASE ' + @DBNameVar
SET @Statement = N'USE ' + @DBNameVar + CHAR(13)
+ N'DBCC CHECKDB (' + @DBNameVar + N')'
EXEC sp_executesql @Statement
PRINT CHAR(13) + CHAR(13)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
END
CLOSE AllDatabases
DEALLOCATE AllDatabases
" failed with the following error: "Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 0, text ID 296853831680 is not referenced.
Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 1, text ID 296853897216 is not referenced.
... to ...
Table error: Object ID 1109769969, index ID 0, partition ID 72057595983888384, alloc unit ID 72057596039200768 (type LOB data). The off-row data node at page (6:459), slot 81, text ID 296871985152 is not referenced.
CHECKING DATABASE master
DBCC results for 'master'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'master'.
DBCC results for 'mssqlsystemresource'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'mssqlsystemresource'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE tempdb
DBCC results for 'tempdb'.
.... removed lines ...
CHECKDB found 0 allocation errors and 82 consistency errors in table '#4225BEF1' (object ID 1109769969).
.... removed lines ...
CHECKDB found 0 allocation errors and 82 consistency errors in database 'tempdb'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (tempdb).
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE model
DBCC results for 'model'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'model'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE msdb
DBCC results for 'msdb'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'msdb'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE ReportServer
DBCC results for 'ReportServer'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'ReportServer'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE ReportServerTempDB
DBCC results for 'ReportServerTempDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'ReportServerTempDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE caisqlp
DBCC results for 'caisqlp'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'caisqlp'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BKALKYL
DBCC results for 'BKALKYL'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BKALKYL'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE distribution
DBCC results for 'distribution'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'distribution'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE DMVstatsDB
DBCC results for 'DMVstatsDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'DMVstatsDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BALDATA
DBCC results for 'BALDATA'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BALDATA'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE VirtualCenterDB
DBCC results for 'VirtualCenterDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'VirtualCenterDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BINGE01
DBCC results for 'BINGE01'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BINGE01'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BMATINK
DBCC results for 'BMATINK'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BMATINK'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BORDE01
DBCC results for 'BORDE01'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BORDE01'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE BSTATISTIK
DBCC results for 'BSTATISTIK'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BSTATISTIK'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE MPSmartDB
DBCC results for 'MPSmartDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'MPSmartDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE SmarTeamPilot
DBCC results for 'SmarTeamPilot'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'SmarTeamPilot'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE STATISTIK
DBCC results for 'STATISTIK'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'STATISTIK'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE VBAS
DBCC results for 'VBAS'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'VBAS'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE MDataMM_0F
DBCC results for 'MDataMM_0F'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'MDataMM_0F'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE DLDB
DBCC results for 'DLDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'DLDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
CHECKING DATABASE ILDB
DBCC results for 'ILDB'.
.... removed lines ...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'ILDB'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:USE master;
GO
SET NOCOUNT ON;
GO
DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT name FROM sys.databases WHERE state_desc=''ONLINE''
OPEN AllDatabases
DECLARE @DBNameVar NVARCHAR(128)
DECLARE @Statement NVARCHAR(300)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
WHILE (@@FETCH_STATUS = 0)
BEGIN
PRINT N''CHECKING DATABASE '' + @DBNameVar
SET @Statement = N''USE '' + @DBNameVar + CHAR(13)
+ N''DBCC CHECKDB ('' + @DBNameVar + N'')''
EXEC sp_executesql @Statement
PRINT CHAR(13) + CHAR(13)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
END
CLOSE AllDatabases
DEALLOCATE AllDatabases
GO
SET NOCOUNT OFF;
GO
This is the top of the stack-dump
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 9.00.3042.00
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Current time is 02:00:08 12/05/07.
8 Unknown CPU 9., 2333 Mhz processor (s).
Windows NT 5.2 Build 3790 CSD Service Pack 2.
Memory
MemoryLoad = 98%
Total Physical = 8189 MB
Available Physical = 163 MB
Total Page File = 9795 MB
Available Page File = 1527 MB
Total Virtual = 8388607 MB
Available Virtual = 8373732 MB
DBCC RESULTS
--------------------
... lines removed ....
**Dump thread - spid = 107, PSS = 0x00000000EE497BC0, EC = 0x00000000EE497BD0
***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0009.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 12/05/07 02:00:08 spid 107
*
* DBCC database corruption
*
* Input Buffer 510 bytes -
* DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
* SELECT name FROM sys.databases WHERE state_desc='ONLINE' OPEN AllDatab
* ases DECLARE @DBNameVar NVARCHAR(128) DECLARE @Statement NVARCHAR(30
* 0) FETCH NEXT FROM AllDatabases INTO @DBNameVar WHILE (@@FETCH_STATU
* S = 0) BEGIN PRINT N'CHECKING DATABASE ' + @DBNameVar SET @Stat
* ement = N'USE ' + @DBNameVar + CHAR(13) + N'DBCC CHECKDB (' + @DB
* NameVar + N')' EXEC sp_executesql @Statement PRINT CHAR(13) + C
* HAR(13) FETCH NEXT FROM AllDatabases INTO @DBNameVar END CLOSE A
* llDatabases DEALLOCATE AllDatabases
*
* *******************************************************************************
* -------------------------------------------------------------------------------
* Short Stack Dump
PSS @0x00000000EE497BC0
-----------------------
My DBCC script looks like this
USE master;
GO
SET NOCOUNT ON;
GO
DECLARE AllDatabases CURSOR LOCAL FAST_FORWARD READ_ONLY FOR
SELECT name FROM sys.databases WHERE state_desc='ONLINE'
OPEN AllDatabases
DECLARE @DBNameVar NVARCHAR(128)
DECLARE @Statement NVARCHAR(300)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
WHILE (@@FETCH_STATUS = 0)
BEGIN
PRINT N'CHECKING DATABASE ' + @DBNameVar
SET @Statement = N'USE ' + @DBNameVar + CHAR(13)
+ N'DBCC CHECKDB (' + @DBNameVar + N')'
EXEC sp_executesql @Statement
PRINT CHAR(13) + CHAR(13)
FETCH NEXT FROM AllDatabases INTO @DBNameVar
END
CLOSE AllDatabases
DEALLOCATE AllDatabases
GO
SET NOCOUNT OFF;
GO
I have an ASP.Net (C# 2.0) application that has been using SQL Server 2005 Standard Edition with Service Pack 1 to hold the session state in a testing environment. Currently, the session state is being stored in TempDB, rather than the ASPState database. This has worked very well for us until yesterday. We installed SQL Server 2005 Service Pack 2, as well as the Critical Update for Service Pack 2 (KB933508). Once the SQL server was rebooted, I got the following error message when I tried to access the web application.
The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The SELECT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.The INSERT permission was denied on the object 'ASPStateTempApplications', database 'tempdb', schema 'dbo'.
In the web.config file for the application, I have a SQL username and password defined that can access the ASPState database. To correct this issue, I had to give this user db_datareader and db_datawriter access to tempDB.
Has anyone else run across this problem, and is it related to SQL Server 2005 Service Pack 2?
has anyone met with this before?the setting is SQL2K with SP3 on a 2 node active-active W2K3 cluster.on one of the machine, it occasionally prompts for the following error:"The log file for database "tempdb" is full. Back up the transactionlog for the database to free up some log space."the problem is, at the time of error, the tempdb tx log is only 200MBand there are over 50G disk space available.settings of tempdb:-- 10% autogrow, unlimited max size-- auto shrink off-- data file around 1GThanks.
View 3 Replies View RelatedHas anyone seen the SQL Server error:
"tempdb is skipped. You cannot run a query that requires tempdb"?
We're running a .Net web application with a SQL Server 2000 backend, and we get the error intermittently. Restarting the SQL Server service seems to fix it, as it causes tempdb to be rebuilt, but this isn't a long term solution. Any direction or hints would be greatly appreciated. Thanks!
- Mike
TempDB is one of the databases equipped with MSSQL Server by default.What is the purpose of it?Why do we use this temp database?
View 4 Replies View RelatedHi,
THis is sql server 6.5 question.
I have tempdb data device size default 2 MB, which has completely filled up. I am trying to expand data device to it.
I created new device tempdb_data_ext (250 MB) and tried to expand tempdb data device. But everytime I do it, it ends up adding space to tempdb log device. How can I expand tempdb data device?
It's extremely urgent.
Thanks
Hi,
How can I control the growth of tempdb in SQl server.It's growing like anything.
CAn I create some alerts or jobs and what those alerts/job are supposed to do?
All help appreciated.
Jai
Hello!
This is error message I discovered in NT even viewer:
c:MSSQL7DATATEMPDB.MDF: Operating system error 112(There is not enough space on the disk.) encountered.
In SQL Server error log the errors are:
Error: 1101, Severity: 17, State: 10
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth..
Currently tempdb rezides on C drive and it's almost out of space.
What should I do?
Detach tempdb and then move to different drive?
What's the procedure?
Thanks
Lena
TEMPDB in one of our production servers does not clear up so every three to four weeks I have to restart NT. Nothing like this happens on any of the other three servers. Does anybody know where I should look at to correct the problem. I sure would appreciate it.
Thanks
Shashu
I have never done this before and thought I would ask. Is it possible to detach the tempdb database, move it to another drive or partition, and then re-attach it? What would be the downside or side-affects to doing such a thing?
Thanks. JT
We want to shrink the size of our TEMPDB , Does anyone know how to without blowing it away and re creating it.
Also, our tempdb expands to occupy all available space on the server, the space is not released until the server is restarted.
Any ideas would be appreciated.
Hi why I cannot backup the tempdb. Is this a normal or there is something that I am doing wrong.
Ali
Hi
I get a message:
Error : 933, Severity: 22, State: 1
Logical page 258 of the log encountered while retrieving highest timestamp in database 'tempdb' is not the last page of the log and we are not currently recovering that database.
I use sqlserver -T4022 to start my SQL Server since it will not start with out it. When I start sqlserver without the option, it tells me that
Error : 615, Severity: 21, State: 1
Unable to find database table id = 2, name = 'tempdb'.
I just want my SQL Server back. Please help!
Thanks
Betty Lee
I need to move tempdb to another drive,also increase the size.Largest database is 15GB.Can anyone suggest the size and also the exact commands to move.Do I need to backup the databases before I do this task?If SP1 is not installed,will it be o.k for me for this tempdb problem.If we have a larger tempdb like 4GB,will it effect anything?...Urgent!!
View 2 Replies View RelatedThe tempdb has grown to over 2 GB on our DB. There are no user tables or SP in it. Is there a way to clean up and are there any consequences to this?
View 4 Replies View RelatedI read an article on this site by Michael Hotek re "Basic SQL Server 6.5 Configuration Options". In the paragraph about TempDB he says that you should always avoid using Temp tables in stored procs. I use this feature a lot when trying to do "not in" type queries (I filter out a portion of a larger table and then use the "not in" on the temp table rather than the entire table.)
Is there a better way to run a Not in query. I have the table well indexed (i think) but it seems to do a full table scan if I use the entire table.
Any ideas???
Our Tempdb.mdf file is 11 gigs. I have tried several things to shrink this but with no luck. Does anybody have a suggestion on how I can free up that space. I have tried to re-start Sql but that didn't do anything. I thought that there was a bug, if the files got above 4 gig that sql wouldn't clear them, but I could be wrong
I thought I could detach it, and attach a new file, but makes me nervous without knowing if that’s correct.
Thanks for the help
Hi,
I moved my tempdb (2MB) to RAM and restarted the server. It did restart but when I tried to connect thru ISQL, it gave me an ERROR -
A connection could not be established to <server-name> - DB-Library. Unable to Connect.
What could be the possible reason.
To move tempdb to RAM, do i just have to change the values of the MEMORY and TEMPDB IN RAM parms and restart or do I have to do anything else.
Please help.
Thanks
Nishant
Hi
When should I put tempdb in RAM and when should I not ?
Thanks in advance
Vijay
I am trying to configure a 6.5 server to set the tempdb to run off disk. I reset the tempdb in ram = 0 in the configuration, and restarted the service, but it left it as running in ram, with 0 configured. I then rebooted the server, and it still left the tempdb in ram. Any ideas?
View 2 Replies View RelatedHi All,
I am trying to get some information about tempdb database. I've tried BOL but I couldn't find a whole lot of info. I am trying to find out what size should tempdb be to not to cause problems. Also, I am trying to shrink tempdb by using shrink database option in EM, but it only shrinks the tempdb transaction log not the datafile, and I don't know why it is happening.
Thanks
We are using Peoplesoft HRMS version 7.0 on NT Server 4.0 and SQL Server 6.5, service packs on both up-to-date.
The server is a HP LX Pro with 4 200 MHz 1MB cache processors with 2,560 MB of RAM and 18 9GB drives configured with different combinations of RAID 1, 1+0, and 5.
The database is 2.3GB in actual size with the specific size of 6GB for data and 2GB for log on separate RAIDs.
We would like to use tempdb in RAM to boost the speed of complex queries that use the tempdb for intermediate working tables.
We would like to know of any experience of running tempdb in RAM, issues to overcome, of how to setup.
There are articles and books not recommending using tempdb in RAM. Comments anyone?
Note: Have looked in SQL Server DBA Survival Guide, and SQL Server Unleashed, along with the normal MS Documentation, technet, online books, and knowledge base searches.
System: Pentium II - Dual 450. 13 GIG RAID. 128 MB RAM.
Everything I've ever heard or seen says not to put tempDB in RAM, citing reasons of negligible benefit or even worse performance as it steals memory from SQL's cache memory.
My issue is I need to take anywhere from 500 to 3000 records (games played) in a batch every five minutes from a table, ordered by game id. There's no guarantee of sequential order to how the records are inserted, so I need to do an ORDER BY in my query. I also do a stored procedure for ranking that requires an ORDER BY.
The performance difference between the two is staggering. 1000 records with a 200 mb tempdb database (not in RAM) takes about 300 seconds. With a 16 MB tempdb database IN ram, it takes just under 127 seconds. Only problem? I'm constantly getting, after a few batches have run, "out of space in syslogs for tempdb ram messages. "
Is there a way to net such performance from tempdb without putting it in RAM, and if not, is there a way to explicity clear out tempdb. Thanks for any help.