Tempdb Log Full Error With Plenty Of Disk Space Available
Jul 23, 2005
has anyone met with this before?
the setting is SQL2K with SP3 on a 2 node active-active W2K3 cluster.
on one of the machine, it occasionally prompts for the following error:
"The log file for database "tempdb" is full. Back up the transaction
log for the database to free up some log space."
the problem is, at the time of error, the tempdb tx log is only 200MB
and there are over 50G disk space available.
settings of tempdb:
-- 10% autogrow, unlimited max size
-- auto shrink off
-- data file around 1G
Thanks.
View 3 Replies
ADVERTISEMENT
Jan 4, 2008
Good morning,
We get frequent (1 out of 3) "sqlmaint.exe failed" errors during backups for one of our larger databases (40GB). So i removed the maintenance plan and put in a custom backup job to get a better error msg in the log:
BackupMedium::ReportIoError: write failure on backup device 'F:MSSQLmydb_2008_1_3_21_45.BAK'. Operating system error 112(There is not enough space on the disk.).
However, we have PLENTY of space on disk:
LOG DISK - NTFS - used space = 2GB, free space = 81GB
BACKUP DISK - NTFS - used space = 29GB, free space = 82GB
So even if it doubled in size, there would still be 50GB free.
Any ideas?
Thanks!!
View 6 Replies
View Related
Nov 29, 2000
does anyone know if tempdb can be physically moved to a different partition on a disk drive on SQL Server 7.0? Since it can't be backed up I'm hesitant to use the sp_detach/sp_attach procedure because I don't want to crash it. If nothing else is available, I can attempt moving it this way at the end of the day and then just reboot to get tempdb back up again if the server fails, but I'd really appreciate a suggestion from someone who has more know-how than I do about system table operations. Thanks again
View 1 Replies
View Related
May 10, 2006
Hi,The tempdb file on one of our servers grew very large and used allavailable disk space. This is SQL Server 2000 SP4. I have installedhotfix version 8.00.2187. I opened a profiler trace but can't still getto the root of the problem. Any help will be appreciated.Egbon*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Feb 18, 2015
My SQL server disk space is getting close to full capacity which is causing certain reports that we run via the SQL server to time out because I don't think there is enough space on the server.
Any tips on cleaning out a SQL server? Are there any folders that can absolutely be deleted to clear space? I know on a local computer that the %temp% folder can be cleaned out. I know when dealing with servers you do not want to make to many changes because it can cause major problems down the road.
View 14 Replies
View Related
Feb 16, 2007
Hello everybody
Had some problems yesterday with a full transaction log. Was able to solve it by following microsofts knowledge base article n° 272318.
However, today I'm trying to create a new DB using the enterprise manager and get this error:
d:databasesHERCULES_1_Data.MDF: Operating system error 112(Es steht nicht genug Speicherplatz auf dem Datenträger zur Verfügung.) encountered.
The free disk space is > 60GB. That's by far enough... I only need 1-2 GB.
Any ideas what's wrong here?
Thanks anyone in advance for some guideance.
Renaud
View 10 Replies
View Related
Jan 10, 2008
Hello,
I am testing my SSIS pakage, but I got a space disk issue (the C disk is over 100 GB):
Error: Date Time
Code: 0xC004704A
Source: xxxxDTS.Pipeline
Description: The buffer manager cannot extend the file "C:DTSxxxF.tmp" to length xxxxxx. There was insufficient disk space.
End Error
Error: Date Time
Code: 0x80070070
Source: xxxxDTS.Pipeline
Description: There is not enough space on the disk.
etc....
How can I solve the problem?
Is there any way to use different path for .tmp file?
Thank,
any help will be very appreciated.
View 7 Replies
View Related
Sep 9, 2007
When running SQLEVAL.EXE, I'm getting an error message when the installation wizard finished 'reading contents of the package' reading:
There is not enough space on C: to extract this package.
Having checked the requirements http://www.microsoft.com/sql/editions/developer/sysreqs.mspx, the free disk space on my c: is 45.42Gb.
Any ideas?
View 1 Replies
View Related
Nov 13, 2007
-- Initialize Control Mechanism
DECLARE@Drive TINYINT,
@SQL VARCHAR(100)
SET@Drive = 97
-- Setup Staging Area
DECLARE@Drives TABLE
(
Drive CHAR(1),
Info VARCHAR(80)
)
WHILE @Drive <= 122
BEGIN
SET@SQL = 'EXEC XP_CMDSHELL ''fsutil volume diskfree ' + CHAR(@Drive) + ':'''
INSERT@Drives
(
Info
)
EXEC(@SQL)
UPDATE@Drives
SETDrive = CHAR(@Drive)
WHEREDrive IS NULL
SET@Drive = @Drive + 1
END
-- Show the expected output
SELECTDrive,
SUM(CASE WHEN Info LIKE 'Total # of bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS TotalBytes,
SUM(CASE WHEN Info LIKE 'Total # of free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS FreeBytes,
SUM(CASE WHEN Info LIKE 'Total # of avail free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS AvailFreeBytes
FROM(
SELECTDrive,
Info
FROM@Drives
WHEREInfo LIKE 'Total # of %'
) AS d
GROUP BYDrive
ORDER BYDrive
E 12°55'05.25"
N 56°04'39.16"
View 16 Replies
View Related
Jan 26, 2004
I am using 6.5 .
Here is the error that i get
Think that tempdb is small how do i change that or what is this error about'
--------------------------
AIMSMan
---------------------------
Application-defined or object-defined error 40002
37000: [Microsoft][ODBC SQL Server Driver][SQL Server]Can't allocate space for object '##RevByNetSALIMJUMMA' in database 'tempdb' because the 'default' segment is full. If you ran out of space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase the size of the segment.( 1105)
ODBC
I only have data and log device how do i increase the tempdb device
let me know
SEJ
View 4 Replies
View Related
May 22, 2008
Can anyone help please?
I am getting the following error:
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 162781324115968' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
Msg 9002, Level 17, State 4, Line 1
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Regards,
Krishna
*Learning IT from experience*
View 4 Replies
View Related
Jul 20, 2005
I keep getting the following error message when I run a serie of SQLcommands:Server: Msg 9002, Level 17, State 6, Line 15The log file for database 'tempdb' is full.Back up the transaction log for the databaseto free up some log space.I have tried "dump transaction tempdb with no_log" right before I runthe SQL command. But that doesn't help.The serie of SQL commands that I try to run is the following:create table #NewBatOp(BatchJournalID uniqueidentifier not null,batch_nr varchar(5) null,OperationNum varchar(3) null,OperationHours real null,EmployeeNum varchar(6) null,OperationDate datetime null,IsOverTime tinyint null)-- |-- Comment this one line-- | out will not triggerinsert into #NewBatOp -- <---| the errorselectbj.BatchJournalID, bj.batch_nr, bo.opno,bo.hrs, bo.bonno, bo.dat, bo.otflgfrom batop boinner join BatchJournal bj onbo.bat = bj.batch_nr andbj.BatchJournalID in(select BatchJournalID from BatchControl)if ( @@error <> 0 )goto OnErrordrop table #NewBatOpgoto EndTestOnError:drop table #NewBatOpprint "Error: Failed to import new batch-operations intojournal."EndTest:I have tried running the above statements in ISQL and in QueryAnalyzer, and I get the same error.I didn't have this problem before I have moved the database from oneserver to another server.- The OS in the old server is Windows-NT,and the SQL Server in the old server is the 2000 version.- The OS in the new server is Windows-2000,and the SQL Server in the old server is the 2000 version.The settings in tempdb in both servers are more or less the same.Actually, the tempdb in the new server is actually much bigger thanthe one in the old server. The size of the transaction logs in bothserver are the same (and cannot be changed manually). Both the dataand the transaction log of tempdb can automatically grow in 10%increment and no restriction on size.The data-and-log of the tempdb are both in one hard disk. The harddisk has 10-GB free space available. Moreover the size of the resultset from the "select" statement above is only 530KB (around 3000 rowsin the result-set). I believe it is a very small database operation.Therefore, I don't think the size has anything to do with the error.I don't think the "inner-join" clause is the cause of the problem. Thereason is that I have used the same "inner-join" clause in otherqueries, and they don't have any problem. As a matter of fact, I haveused many other queries that are far more complicated and have createdmuch bigger result set in tempdb, and they don't have this problem.I am very puzzled of this error. Can someone give me a pointer?Thanks in advance for any info.Jay Chan
View 10 Replies
View Related
Nov 20, 2000
Hi all,
I need to load a table with 820,000 records from a Sybase db via DTS. It always fail with the error:
"Error at destination for row number 820000. Could not allocate space for object in tablespace tempdb
. The default filegroup is full.".
There is only the primary filegroup defined in the db. I've increased the size from 1.5GB to 2GB,
and specify that it shd grow automatically by 10% and there's no limit to the size.
There is still some 28GB in the server, so it should be fine.
It still fail so I added another file to the primary filegroup with size 100MB. Again, it failed with the same error msg.
Where or how else can I increase the tempdb size?
Any help is appreciated.
Thanx,
Jes
View 1 Replies
View Related
Jan 31, 2008
I have an error on the phpbb message board I am using. I have a MS SQL database and cannot figure out what I get this error. How could I fix this?
The full error is:
Could not allocate space for object 'phpbb_topics' in database 'adultsiblinggrief' because the 'PRIMARY' filegroup is full.
View 1 Replies
View Related
Mar 5, 2008
Hi
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Any help will be much appreciated.
Regards
Adnan
View 5 Replies
View Related
Jun 24, 2004
I want to move the tempdb SQLServer database from the default install location (c:program filesMicrosoft...)
to d:mydb
How can I do that ?
View 5 Replies
View Related
Jul 23, 1998
Our development server is limited on RAM and I have been asked to increase Tempdb. I made the decision to put it back on disk; something I have done dozens of times before. I have used the Enterprise Manager`s GUI interface and I have manually typed in the SQL using ISQL/w, both ways have resulted in the same error message.
Microsoft SQL-DMO
Error 5016: [SQL Server] Incorrect database name or device name(s).
I have dropped the old and created new database devices (with different names) and I still receive the error message. I have even tried rebooting with Tempdb back in RAM and on disk 1t 2MB (which works). And yes, I HAVE checked my typing.
I would GREATLY appreciate any ideas on what may be wrong. The system is 6.5 with SP4 on Win NT with SP3. I inherited the system, so I am not certain what the hisory is.
Thanks,
Mike Gaudet
Visages, Inc.
View 3 Replies
View Related
Oct 23, 2015
I try to find some feedback regarding setting the TempDB files on a RAM disk.Specifically I am looking for "production results" that could show the difference/benefit of such an usage.The tests on physical server and VM I already made have shown a boost in overall SQL Server 2012 performance on SQL Server instances housing data for SharePoint 2013 and Dynamics AX 2012 R2.Graphic below show differences between 5 different configuration on the same physical server:
- Physical HD: Â Server with local HD
- Physical SANEX1PRD: Server with TempDB files stored on a low-end SAN
- Physical SAN1: Server with TempDB files stored on a high-end SAN (around 100000 IOps)
- Physical SAN1 Jumbo: same setup with Jumbo Frame activated on NIC and DB engine
- Physical RAMdrive: with TempDB files stored on a 16 GB soft RAM drive within OS memory
Results were really impressive for the DB engine housing Dynamics AX data. My colleagues from the SharePoint team told me it also boosted a bit overall SharePoint performances but they did not have any baseline comparison to show.If you have some feedback, results, links, whatever I am interested.Indeed before setting this to all our SQL Server 2012 instances I y rather collect some *real world* feedback.
View 2 Replies
View Related
Nov 19, 2000
Hello
I need to setup a compaq sever with 300 MB database, and will be adding around 600 records on a daily basis. Can someone help with how much disk space i should have on sqlserver, providing i have c: and d: setup.
Thank you in advance for all the help.
Paula
View 1 Replies
View Related
Feb 19, 2001
Hi All,
I have a server and it has C: D: F: I: Drives and all the system files are on C:Drive and and all the .MDF's and .LDF's(model,temp,master) are on the F: Drive and now I am running out of space on both(C: and F: Drives)
1. Can we add space to the C: and F: drives on the fly?.
2. Can I move the System databases ( MDF's and LDF's to some other drive)and if so, how do I do it?( Moving the databases ) and this is on the production database so when I have to do this.Will there be any impact.
Thanks in Advance,
Reddy
View 2 Replies
View Related
Feb 21, 2003
Does anyone know how to get the free disk space for all drives in many different SQL servers.
I need to populate a report (right now output in Excel) with the free disk space of all drives on all of my SQL servers.
I found xp_fixeddrives but that is specific for the server where it is executed.
Any help or pointers to a script in the archives is much appreciated.
Thanks.
View 2 Replies
View Related
Aug 2, 2004
I noticed something strange today. I was running a query using query analyzer on a large database (8.8 million records) and the disk space on the c: drive was dropping and eventually went to 0. Availalbe space on the c: drive is 10GB. The query did complete. SQL server and all the databases are on the d: drive. After closing the query results in query analyzer the disk space returned. Is this a concern and is there a way to change it to use the d: for whatever it is doing?
View 3 Replies
View Related
Jun 30, 2006
This is my first attempt using SQL 2000 and DTS. I am importing an Access database using the DTS wizard. The process fails with a "Not enough space on temporary disk" error. There is definitely enough space on the physical disk. I don't have any limits on any folder sizes either. What "disk" is the error talking about, and how do I give it enough space. The database is relatively small, about 10MB. I believe the database was created using Access 97. Please help.
View 1 Replies
View Related
Feb 21, 2002
I need a way to get the used space for a physical drive, or even the total capacity for a drive to do some calculations.
I don't want to have to write my own native code either.
Is there a stored procedure that will give this to me?
I saw the xp_fixeddrives that will give the free space, but I need one of the other as well.
Any way to get this?
Thanks,
Jason
View 2 Replies
View Related
May 9, 2000
We recently moved from v6.5 to v7.0. Now I have the databases and logs set to "autogrow". How can I monitor the disk space to ensure I do not run out of room (or is that preset as to how large it can grow ?). Can't find anything in the books online. Do I do this through the NT admin tool or through the SQL*Server Enterprise Manager and more importantly - how ???
Thanks so much for any help...
Nancy
View 3 Replies
View Related
Feb 19, 2001
I'm trying to save a dts package and it keeps coming back with insufficient disk space. I noiticed that db MSDB was full so I manually increased the size. It was set to manually grow at 1 mb increments. But for some reason it didn't look like it was doing that so I manually increased it. Right now this is about 355 MB free so that should be plenty to save a package. But its still coming back with the same error insufficient disk space to complete operation. Any ideas on why or why it didn't grow on its own? Please help I can't seem to save any packages.
View 1 Replies
View Related
Feb 2, 2000
Our database -SQL Server 7.0 sp1 (NT 4.0 sp5)- is growing at a very fast rate despite the fact that we are deleting old record. It doesn't seem to be recovering disk space for the deleted records. Please let me know if there is a specific setting that can help us recover disk space. )
View 1 Replies
View Related
Mar 23, 2006
Hi,
I'm new to these forums (and to SQL Server), so please be gentle with me.
I am developing a process to obtain information on all our remote servers/databases, and store it in a single local database.
I'm after things like db size, last backup date, free drive space etc...the usual weekly statistics.
I've linked the remote servers to my local one, and have written a few simple procedures (which exist on the local server) to grab backup and file size information from the remote tables. The output is stored locally in tables which we can then query as necessary.
I am having difficulty obtaining the free drive space details.
I'm using :-
'exec <remote_server>.master.dbo.xp_fixeddrives' to get the info, but I cannot store the output in a table on the local server. (remote_server_name, date, drive_letter, space_mb)
I wish to avoid creating any objects on the remote servers if at all possible.
I really want to pass the remote server name into the procedure, and the output to be inserted into the table.
Many thanks
View 4 Replies
View Related
May 7, 2008
is there a tsql command that returns the amount of disk space available. I want to set up a job to run and email if it gets to a certain level.
View 1 Replies
View Related
Jan 18, 2007
Hi
I have 600 instances on my network .... I need to monitor the Disk Space ... how should I do that I mean the best way for this would be ???
By Disk Space I mean the SQL Instance should atleat have 10% of free disk space ... If it is less , maybe an alert can be sent or something of that sort .
Now it would be a pain configuring alerts on each machine.
Is there some good way to this
Thanks in advance.
View 6 Replies
View Related
Aug 8, 2007
All,
I think i know the answer to this one already, but would like to check before going back to my management.
Background. In the past 2 weeks, a number of our databases have shot up in size, and are now at 100% utilisation of allocated disk space. My management have asked me to look into what is causing these to fill up so quickly.
Unfortunatly there were no snap shots or information relating to the databases / tables so i can not determine which tables have grown and are causing the problems.
I have also looked through the sql logs and the event viewer logs to see if there is anything out of the ordinary, but again apart from log / database backups there is nothing of note in there.
I am going to be implementing a solution that I got off another thread which will give me some database / table history to help me in the future, but for now is there anything else i can do? or is it a case of me getting back to the application guys and getting them to reduce data (as there is no more disk space to give them).
Any thoughts or advice you can give me would be greatfully received.
Mark
-noob dba-
View 14 Replies
View Related
Nov 12, 2007
Okay, so i have a Dual Xeon SQL2k5 Server set up. it's got 4 10k RPM Raptor Drivers (160gb) on it all stripped together. my question is this, i was just doing all kinds of index tuning, and my server didnt have enough disk space to create 2two of the recommended adjustments. i'm curious, if i should just have those two indexes stored on the 1TB Backup array i have? (two 500gb 7200RPM drives)
or should i backup the database, and expand the Raptor Array and then restore the database and create the indexes?
i'm not really worried about down time as long as it doesnt exceed 2 days.
View 3 Replies
View Related
Nov 29, 2007
All,
I first ran indexdefrag on a table with 1.5 billion rows.
logical fragmentation was at 95%.
logical frag went down to 3% with no real effect on disk.
DBCC reindex had previously been bombing undetected.
Now I've run a reindex on this table:
Reindex Job with Fillfactor =100
Ran in 3:05
Free Disk went from ~150GB before operation to 49GB
File4 went from 347GB to 504GB
Why has so much free disk been consumed by this operation and not released ??????????
Is my only choice to shrink data file???
thanks
Env.
Win2k ENT os
SQL 2k5 std 64bit
View 4 Replies
View Related
