Time Format - What's The Smallest Unit SQL 2005 Can Take?
May 2, 2007saw my AS400 has this time stamp: 2007-05-02-11.29.56.811195
is SQL2005 able to have time stamp to this details?
saw my AS400 has this time stamp: 2007-05-02-11.29.56.811195
is SQL2005 able to have time stamp to this details?
I have three different columns, hour(s), min(s), sec(s)
I can add it up, but will like to convert it into. hrs, mins and sec.
this is how, i am adding it up into seconds.
SELECT ((TotalTimeSpentHrs*60*60)+(TotalTimeSpentMin*60)+(TotalTimeSpentSec))AS totaltime
FROM EST1
How can I convert the total seconds, so that i can input the result in a new column.
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
What is the unit of the numbers you get in the Time Statistics-part when running a query in Microsoft SQL Server Management Studio with Client Statistics turned on?
Currently I get mostly 0´s, but if I try and *** up a query on purpose I can get
it up to around 30... Is it milliseconds or som made up number based on clockcycles or... ?
I would also like to know if it´s possible to change the precision.
- Nikolaj
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
I am in need of a format string or simple vb code that can add the local time zone to the end of a time field.. Something like:
9:36 AM EST
9:36 AM PST
This timezone will just come from the machine that the reporting server is on. I don't see this listed as a standard format, and I have come up empty so far in my research - anyone got a solution for this?
Thanks a bunch!
I have met up a problem. How to i get the second smallest value instead of the smallest value in a table using min(). Any other function rather than min()?
View 11 Replies View RelatedHey
Its easy to get the MAX or MIN from a table,
but what if you want to get the 2nd largest ? or 2nd smallest ?
Is there any way to use a font size smaller than 8pt? Believe it or not... I need to go down to a 6pt font for a report.
Thanks!
Leif
Hi,
I have a sql query which gives me the result set with lots of columns and rows.
a b c allocated unallocated
- ------ 75458702 0484095809
------- 534534 8743857
------- 953459034 90584395
i have to find of which is the smallest number in both allocated and unallocated columns -
here in this case
it would be 534534.
how do i do this ?
Thanks
I have a table with the following variables:
patid cddate nadcd4
Patients (patid) have multiple records. I am trying to find the lowest nadcd4 for each patient along with the associated cddate. I can do a min(nadcd4) and find the lowest nadcd4 by patid but I can't seem to get the associated cddate. Any suggestions? Thanks
wal
i have table in sql and every month i am appending new data in this table, but i want to sort data Culumn Name "account_no' from smallest to largest, and whenever i append new data to this table it auto sort every time,
View 1 Replies View Related
Hi
Please help! I'm really stuck. I have a table (AssessorAllocations) that stores the data of students who have submitted assessments for marking by an Assessor. Each time an assessment is submitted by a student my program must determine which Assessor has the smallest workload and then assign the current assessment to that Assessor. My problem is how do I determine which Assessor has the smallest number of assessments assigned to him/her.
The table columns are:
AssessorRegistrationNo
LearnerRegistrationNo
QualficationName
SubjectName
AssessmentName
DateAssigned
Marked
DateMarked
Price
So I'm looking for something like this:
Select AssessorRegistrationNo from AssessorAllocations where {Select the Assessor who has the smallest number of AssessmentNames assigned to him/her where Marked='0' and DateAssigned<>''}
Thanks
Neil
I am looking for a way to retrieve the time from a Sql 2000 database in the format of hh:mm AM or PM. I am storing the information as a "datetime" data type. If I only supply the time (such as 02:30 PM) then the date defaults to 12/30/1899. When I read the information from the database I get "1899-12-30 14:30:00:000".
If I enter 02:30 PM I would like to get 02:30 PM.
I have tried various convert functions in Sql, maybe there is a way to format with an ASP.Net datetime function but I need help to get the information back in the right format.
Thx In Advance
Hello,
I am taking datetime value from a table MA and separating date and time by using CONVERT function.
CONVERT(VARCHAR(12), MA.ArrivalDate, 101) AS ArrivalDate, '
CONVERT(VARCHAR(12), MA.ArrivalDate, 108) AS ArrivalTime,
but my ArrivalTime is coming as 13:01:00. I want to convert this time as 1:01:00. I have to do this conversion in my stored proc, not in my code. can you help ..? Thanks
Hi
I have TIME stored in the column as
stime
-----
16:12:00
16:14:00
00:00:00
16:12:00
02:18:00
Required output :
1612
1614
I need to get its as in 24 hrs (not required seconds)
Ex:16:12
I am also require without semicolon Ex:1612
Many Thanks in advance
Hi
we have a column in database named "time" but it stores value as VARCHAR(9) datatype,
when i display the "time" field (let us say "time" value is 07:54 AM) on reports, it displays the value as it is (07:54 AM)
but i need the value to be displayed as 7:45 AM on the reports.
how can i do that ?
clearly
field in the database is TIME (varchar(9))
07:45 AM must be displayed as 7:45AM
12:34 PM must be displayed as 12:34 PM
I tryed to write a function in sql reports properties code which acceptes array of charecters and depending up on the value of left most charecter of recieved array it will return charectr string back, but coulded get it worked
could you please help me for solution
In a select statement a date field contains 1/1/2004 3:00:00 AM.In my select statement how do I get the field to show as 1/1/04?
Thanks
Hi,
I want ot get time just like this : 8:40:15 AMI am using
select convert(varchar(12),getdate(),8) to get this but this function return 24 Hrs format.
How to achive this by using small coding.
Jasim...
Hello,
I have a sql table setup with a date field and a time field. They are both set to datetime.
In my net form, the date is entered as a date and gets added the the SQL table OK.
My problem is the time field. If i enter it straight into the SQL table as say 2pm, it adds it correctly as 2:00:00 PM.
When I try to enter the time through my VB.net webform, the time gets added ok, but it places the date in the field as well to look like 14/04/2004 2:00:00 PM, I only want the time part of the field.
My code to add the time to the SQL table is as follows,
.Add(New SqlParameter("@time", SqlDbType.DateTime)).Value = txttime.txt
How do I remove the date from the time field.
Thanks
Goong
Dear all,
i have one table that colum is
164020 ---- that on convert into hh:mm:ss like 16:40:20
advance thanks
Hi,
When I edit the recurring job schedule for a job, I try to set a job run
in daily frequency at 11:00 am . But I can only edit the field in "11:00:00" and it always run at 11:00pm. Can someone know to set it run at 11:00am.
Thanks
Joe
In SQL Server 2000 we are loading data into a smalldatetime field. The file is being loaded from a text file that contains the date in the following format: 07/24/2000 16:08
The problem occurs when the data is as follows: 04/28/2000 14:60
Microsoft SQL Server6.5 was forgiving and would translate this to 15:00 upon load but SQL Server2000 is failing with the Invalid Time Format error.
Can anything be done to force SQL Server 2000 to recognize this?
Thank you,
Steve
What do you think of a query that generates aSystem.Data.SqlClient.SqlException when submitted via a application,but when run through QueryAnalyzer or EnterpriseManager doesn'tgenerate a error? Here are 2 examples of the query:SELECT table1.*,table2.field1,table2.field2,table2.field3 FROMtable1,table2 WHERE table1.field1 = table2.field1 ANDtable1.field2='103' ANDtable2.TStamp > '12/19/2005 12:20:14 PM' ORDER BY table2.TStampSystem.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '12'.SELECT table1.*,table2.field1,table2.field2,table2.field3 FROMtable1,table2 WHERE table1.field1 = table2.field1 ANDtable1.field2='103' ANDtable2.TStamp > '12/8/2005 8:29:43 AM'ORDER BY table2.TStampSystem.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '8'.I believe the error is referencing the hour portion of the timestamp.When I run these queries through QA/EM I don't get a result set ... somaybe those apps just trap the exception and ignore it. Still, seeanything wrong with the TStamp?
View 4 Replies View RelatedI want to retrieve a date time field from SQL server. The format I want it to be retrieved is:
YYYY/MM/DD-hh:mm:ss:lll (l = millisec)
example '2006/06/21-15:26:39:994'.
Can somebody please tell me how to do it. I know how to do it in Oracle, but not in SQL server.
I have a DateTime parameter called End Date set up with a default value eg =DateAdd("s",-1,Today). When I preview, the default value appears as 19/09/2006 23:59:59, which is fine.
However, when the report is deployed, it is displayed as 19/09/2006 11:59:59 PM. This would also be fine, except when the user changes the date using the calendar, it converts the time back to 24 hour time - eg 19/09/2006 23:59:59. Then when the report is run, it converts the time format back to AM/PM again.
Also, I have a Start Date Parameter, with a default value of 12:00AM today. I would like this to be displayed as 19/09/2006 12:00AM in the Start Date parameter text box, however reporting services will not display the 12:00AM part. Using FormatDateTime in the Default value will return a string and cause an error. I don't want to change the parameter to a string and lose the date picker.
Any ideas,
Thanks
PS Getting the Date/Time settings changed on the reporting server would be extremely difficult!
Hi !!
I am having difficulties working with SQL Server SmallDataTime...
I use TransactionDate as smalldatetime.. Now for reporting purpose my client needs
date as ccyymmdd format and
time as hhmmss format
I am able to get date in ccyymmdd using
CONVERT(varchar(8), @fDate, 112) )
How do I get time in hhmmss format .. its little urgent pls help....
I tried using DATEPART(hh, @fDate) DATEPART(mm, @fDate) DATEPART(ss, @fDate)
how do I make one string of hhmmss..
Is there a better way?
I want to convert a datetime type into and speciically formatted time:the table contains this:1899-12-30 10:00:00.000I want to reformat it to appear like this:10:00 AM I want to do this with SQL using a CONVERT of something along that line.I've been able to find all kinds of date and date/time formats, but not time alone in the above format.And suggestions?TIA</chaz>
View 3 Replies View RelatedHello, everyone:
I have a customer time duration format like "12:15" that means 12 minutes and 15 seconds. I want to convert to be "12.25 " that means 12.25 minutes. Any suggestion please. Thanks a lot.
ZYT
I have a table where the date and time stamp are logged together and I want to only show the date in a 10 character output. Also I want to return as blank some dates in the field that are 01/01/1800.
The current table format is 2013-06-28 00:00:00:000..I just want the date. I was using RTRIM function but it keeps erroring out.
Hi,
with the bcp (bulk copy program) I output some data to a file. The data consists of two columns which are datetime values and one column with the difference in time. For the difference calculation I use the DATEDIFF function. This function can only give the diff back in minutes or hours and not in a time format.
Can I use a function to format the result or do I have to do it manually?
I managed to do the calculation manually by using the % (mod) operator, but then I have the time in this format 0:0 where it should be in 00:00 or 00:00:00. In that case I need a function or a way to add preceding zero's to the values.
Note that the formatting or manual calculation should be done in the SELECT clause to be able to use the bcp tool.
Thanks in advance,
Maarten de Jong
Website developer
Would it be possible to change the date time from varchar to datetime. it currently showing as varchar in the following format 20080401 0845
can it be changed to date/time format into something like this 01/04/2008 08:45. If someone could help that would be great. Many thanks
I have a time column in the below format in a table. I want to change it to "hhmm" format. How I can do that?
12:35
13:41
17:23
06:35
I want output
1235
1341
1723
0635