I have install SQLExpress, too I download AdventureDB, but it created files *.mdf and *.ldf.Now in SQLExpress I cann't attach database witch mouse, I believe that it in code, how I can goal it?. Is there some other way to make this in SQLExpress?
View 11 Replies This is by FAR, the most frustrating problem I have dealt with for a while.I have a project containing a SqlExpress database that I created in Visual Studio 2005. Everything works perfectly on my development machine. However, upon copying the site up to the webserver, I get an error stating:An attempt to attach an auto-named database for file
D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the
same name exists, or specified file cannot be opened, or it is located
on UNC shareI have read almost every article/forum post that resulted from a search with google. I also searched these forums, to no avail.Note - SQLExpress had just been downloaded and installed on the server, so it wasn't being used yet. Server is Windows Server 2003. Here are the following steps I have already taken:Used SSEUTIL.EXE to verify that another database of the same name was not already attachedUninstalled & reinstalled SQLExpress multiple timesTemporarily granted 'Full Control' permissions to 'Everyone' on the site folder to verify that it was not a permissions issue.Created a very simple website, with a new database, one page - with one listbox control, and a sqldatasource. Got the exact same error. Should rule out a problem with my application.Tried various flavors of the web.config connection string.Probably other stuff that I forgot about, but will add if I remember.The only things I could imagine being wrong are either a problem with my connectionString, or the fact that SQLExpress is installed on C:, and webstuff is on D: (Wasn't able to install SqlExpress to D: for some reason)Connection String <connectionStrings> <add name="ClassAdConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ClassAd.mdf;Integrated Security=true;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings> So I have had like 12 strokes today. If anybody could help me get this fixed, I will spread tales of your awesomeness throughout the landsI have included some extra info below in case it is needed. Thanks, Adam.Entire Error An attempt to attach an auto-named database for file
D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the
same name exists, or specified file cannot be opened, or it is located
on UNC share.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:
An attempt to attach an auto-named database for file
D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the
same name exists, or specified file cannot be opened, or it is located
on UNC share.
Source Error:
Line 1705: }Line 1706: ClassAd.CategoriesDataTable dataTable = new ClassAd.CategoriesDataTable();Line 1707: this.Adapter.Fill(dataTable);Line 1708: return dataTable;Line 1709: }
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs Line: 1707
Stack Trace:
[SqlException (0x80131904): An attempt to attach an auto-named database for file D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162 System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107 ClassAdTableAdapters.CategoriesTableAdapter.GetCategoriesByPropCode(String PropCode) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs:1707[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +358 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +482 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2040 System.Web.UI.WebControls.ListControl.OnDataBinding(EventArgs e) +92 System.Web.UI.WebControls.ListControl.PerformSelect() +31 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +26 System.Web.UI.WebControls.ListBox.OnPreRender(EventArgs e) +9 System.Web.UI.Control.PreRenderRecursiveInternal() +77 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
This is by FAR, the most frustrating problem I have dealt with for a while.
I have a project containing a SqlExpress database that I created in Visual Studio 2005. Everything works perfectly on my development machine. However, upon copying the site up to the webserver, I get an error stating:
An attempt to attach an auto-named database for fileD:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with thesame name exists, or specified file cannot be opened, or it is locatedon UNC share
I have read almost every article/forum post that resulted from a search with google. I also searched these forums, to no avail.
Note - SQLExpress had just been downloaded and installed on the server, so it wasn't being used yet. Server is Windows Server 2003.
Here are the following steps I have already taken:
Used SSEUTIL.EXE to verify that another database of the same name was not already attached
Uninstalled & reinstalled SQLExpress multiple times
Temporarily granted 'Full Control' permissions to 'Everyone' on the site folder to verify that it was not a permissions issue.
Created a very simple website, with a new database, one page - with one listbox control, and a sqldatasource. Got the exact same error. Should rule out a problem with my application.
Tried various flavors of the web.config connection string.
Probably other stuff that I forgot about, but will add if I remember.
The only things I could imagine being wrong are either a problem with my connectionString, or the fact that SQLExpress is installed on C:, and webstuff is on D: (Wasn't able to install SqlExpress to D: for some reason)
Connection String
<connectionStrings>
<add name="ClassAdConnectionString" connectionString="Data Source=.SQLEXPRESS;
AttachDbFilename=|DataDirectory|ClassAd.mdf;Integrated Security=true;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
So I have had like 12 strokes today. If anybody could help me get this fixed, I will spread tales of your awesomeness throughout the lands
I have included some extra info below in case it is needed.
Thanks, Adam.
Entire Error
An attempt to attach an auto-named database for fileD:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with thesame name exists, or specified file cannot be opened, or it is locatedon UNC share. Description: Anunhandled exception occurred during the execution of the current webrequest. Please review the stack trace for more information about theerror and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException:An attempt to attach an auto-named database for fileD:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with thesame name exists, or specified file cannot be opened, or it is locatedon UNC share.
Source Error:
Line 1705: }
Line 1706: ClassAd.CategoriesDataTable dataTable = new ClassAd.CategoriesDataTable();
Line 1707: this.Adapter.Fill(dataTable);
Line 1708: return dataTable;
Line 1709: }
Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs Line: 1707
Stack Trace:
[SqlException (0x80131904): An attempt to attach an auto-named database for file D:ContentwwwFMakerApp_DataClassAd.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
ClassAdTableAdapters.CategoriesTableAdapter.GetCategoriesByPropCode(String PropCode) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesforms9d7c504b4b8a576eApp_Code.3dq8tdsl.9.cs:1707
[TargetInvocationException: Exception has been thrown by the target of an invocation.]
System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0
System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +358
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29
System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +482
System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2040
System.Web.UI.WebControls.ListControl.OnDataBinding(EventArgs e) +92
System.Web.UI.WebControls.ListControl.PerformSelect() +31
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +26
System.Web.UI.WebControls.ListBox.OnPreRender(EventArgs e) +9
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Hi,
After having published the timetracker starterkit from visual studio 2005 to local wwwroot,
I try to access my homepage with ie.
But still get the same error message :
An attempt to attach an auto-named database for file C:Documents and SettingsEmmanuelMy DocumentsVisual Studio 2005WebSitesGestWaresApp_DataTimeTracker.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
This is how i configure my web.config :
<connectionStrings>
<remove name="LocalSqlServer"/>
<add name="LocalSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=True;AttachDBFilename=|DataDirectory|TimeTracker.mdf;User Instance=true"/>
<add name="aspnet_staterKits_TimeTracker" connectionString="Data Source=.SQLExpress;Integrated Security=True;AttachDBFilename=|DataDirectory|TimeTracker.mdf;User Instance=true"/>
<add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TimeTracker.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
</connectionStrings>
Has someone any idea how my connectionstrings statement has to look like?
thanks in advance.
Manu.
Alan writes "Is it possible to create scripts which can be started remotely
to attach and detach databases into SQLExpress 2005.
If so how."
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
An attempt to attach an auto-named database for file C:WebApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
My web.config file, the connection strings
<connectionStrings>
<add name="POAdatabaseConnectionString1" connectionString="Data Source=sss;Persist Security Info=True;Initial Catalog=POAdatabase.mdf;Integrated Security=SSPI" providerName="System.Data.SqlClient" />
</connectionStrings>
I cann't really find the statement for attaching aspnetdb.mdf. I don't where to find it. Is there any other web.config file in the C drive? Thanks for help!
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which the company says works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get an error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
If I detach a database on a server, then attach the database with asingle file only using the data file...will I lose any transactionsthat were in the original log file? There is a debate going on here atwork where some people think that during the detach, transactions inthe log file are saved to the data file.Thanks!
View 4 Replies View RelatedI've created a database inside my ASP.net project, the database is in the App_Data folder as exepcted.I can't run the aspnet_regsql until I have attached it using SQL Server Management Studio, but when I try to attach the database it doesn't let me navigate through my folders properly. The database is in C:UsersWardieDocumentsFirstProjectApp_Data but SQL SMS only lets me navigate to the folder C:UsersWardie and no further for some reason, meaning I can't attach the database and can't use the aspnet_regsql service to create the membership tables.Does anyone know how to fix this?
View 3 Replies View RelatedHi guys,
I had user who would like attach trial database and de-attach database when he do development. I do not want him had any other permission except the database he attach. I give him database creator role. But it did not seems work. I have to give him database creator role and system admin role also. Any one have better ideas about this?
Thanks for help
Helen
Basically says chain linkage mismatch
Any way to fix this?
hi ,
i want to use a database that someone created in SQL SERVER 2000/WINDOWS SERVER 2003.My system is SQL SERVER 2000/XP SP2 PRO .The problem is that the database is an unknown file .I mean ,it isn't ,as usually, an .mdf or .ldf file ,so i cannot attach it to the server.
Is there a problem in compatibility between the different versions of windows?Or is missing something from the database?What can i do?
Thanx in advanced
I want to attach a database that one of the developers had detach it. The LDF file was deleted after detach.
I tried to attach and rebuild the log file in SQL2005 using the following:
USE [master]
GO
CREATE DATABASE [Test] ON
(FILENAME = N'G:MSSQLDataTest.mdf')
FOR ATTACH_REBUILD_LOG
GO
I get the following error:
File activation failure. The physical file name "D:MSSQLDATATest_log.LDF" may be incorrect.
The log cannot be rebuilt because the database was not cleanly shut down.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'Test'. CREATE DATABASE is aborted.
What should I do?
Thanks,
Canada DBA
I have a database on a server and want to put it my local laptop that also has sql express. I attached the db, I see it in Management Studio but it does not show up in
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData so my app is not working correctely. How do I get the db to show up in the MSSWLData folder. I'm a bit confused.
That's the error I get.Please help
'
TITLE: Microsoft SQL Server Management Studio Express------------------------------Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum)------------------------------ADDITIONAL INFORMATION:An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)------------------------------C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLDataMyNewDB.mdf is not a primary database file. (Microsoft SQL Server, Error: 5171)
Hi,
I have a database that I developed using both Toad for SQL and SQL Server Managment Studio.
All was working fine. I could connect to the database with one of the above and also run two an applications I developed (one in C# and One in VB.NET using VS Express) using the standard SQLConnection class.
the following connection string worked fine...
Server="(local)"; Trusted_Connection="yes"; Database="CDEvolution";
Now, for one reason or another I decided to create a new data source in my Visual Studio project and pointed it to the database fine.
At first it seemed ok as I could see all tables from teh database. However somethign strage has happened. I now can't access the database in TOAD or SQL Server Managment Studio. I also couldn't connect using the above string.
I finally managed to get the two appllications I developed to access database using the following connection string...
Data Source=.SQLEXPRESS;AttachDbFilename=C:Program FilesMicrosoft SQL ServerMSSQLDataCDEvolution.mdf;Integrated Security=True;Connect Timeout=6000;User Instance=True;
and the applications work fine, however I can access the database using the DB tools.
In SQL Server Managment Studio I remove the database and tried to attach it again but I keep getting the following error message...Could not find row in sysindexes for database ID 5, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'C:PROGRAM FILESMICROSOFT SQL SERVERMSSQLDATACDEVOLUTION.MDF'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
Any ideas on how I can get access back?
Cheers in advance,
Kevin
Can not attach database,
Error message;
The file you've specified is not a valid SQL Server database file.
My costumer HDD some files Deleted mybe elektric prblem -Elektric
go,com,go,come- then windows not opened.
insert corrupt hdd Another computer, then recovering (recover my files
software)
Recover mdf and ldf files. but I can not not attach mdf. file,
I am recovery .mdf file http://www.officerecovery.com/mssql/ some table ok.
but my importand table is not ok.
if I can recover another recovery software , my database correct recover or
same.?
I am using RecoverMyFiles.
Pleace help me.
Thanks.
Hi,
We are trying to attach a Database from SQL7 to SQL2K SP3.
On SQL7
The Database was detached and the MDF copied to the New Server.
On SQL2K
We used the attach Db (in Enterprise Manager).
We get a red 'x' as normal against the logfile and noramlly it would create a new one when u proceed, but this time we are getting an error after the dialogue box asking to create a new one:
Error 1813: Could not open new database 'dbname'. CREATE DATABASE is aborted.
Device activation error. The physical file name 'd:mssql7datadbname.ldf' maybe incorrect.
The path is where the logfile resided on the old server.
Regards
John.
I can't start SQLEXPRESS.
The SQL ERRORLOG shows: Error is 3414, Severity 21, State 2 and says: "An error occurred during recovery, preventing the database 'model' (database ID 3) from restarting." Just prior to this, I get a warning: "did not see LP_CKPT_END".
Any thoughts why this might be and how I can fix this?
hiya,
I have sqlExpress and sqlServerManagementStudio on my XP pro box.
Will the installation of sqlExpress (Advanced Services) cause any problems?IS thereanything that I shold be aware of in advance?
many thanks,
yogi
I've just created ASPNETDB database with ASP.NET Security. Now, I want to send this db to orther computer.First, I detached this db, then when I used attach database in that computer, there is an error :Error 602: Could not find row in sysindexes for database ID 8, object ID 1, indext ID 1. RUN DBCC CHECKTABLE on sysindexes. Please help me .Thank.
View 3 Replies View RelatedHi to all, Is there any way to attach a database using query.
View 1 Replies View RelatedProblem is: "I am trying to attach a database through SQLDMO using VB6 In MSDE (Microsoft Sql Server Desktop Engine). If my '.mdf' and '.ldf' files are placed in a folder with Spaces then it give me error because it is picking up the folder name up to first space."
i saw some asp.net 2.0 start kit use this method to attach a database instance like this:
<add name="connectionstring" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=DataDirectory|JsskDb.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
but my develop enviroment is sql server 2000 and vs 2005,can i do it ?
In SQL when I right click on Databases the option to use Attach/Detach is greyed out. I don't understand why. I'm running SQL 7 on Win2000 server and I have Win2k at sp2 and SQL at sp2.
Help please!
Chris
Has anyone ever used the CREATE DATABASE statement with the FOR ATTACH clause?
I have a database with something like 128 physical data files which I have to move (detach, move the physical files and then re-attach). Since the limit for sp_attach_db is 16 files, I am forced to use the FOR ATTACH option. I was wondering if anyone had ever done this and if there were any hints and/or recommendations you might be willing to share...
Regards,
hmscott
Folks, i had a database with data and log file on seperate disks. After reboot, i've lost the log file; now i am trying to attache the data file using EM and QA, i get the following error; plz guide:
sp_attach_single_file_db 'production', 'd:production_data.mdf'
Server: Msg 1813, Level 16, State 2, Line 1
Could not open new database 'production'. CREATE DATABASE is aborted.
Device activation error. The physical file name 'D:production_log.LDF' may be incorrect.
Howdy!
I detached a db to copy it and to my surprise i cant reattach it the same way i detached ... How do i do this?
View 1 Replies View RelatedWhen I Attach Database it always rise up Error ( see image). how to do it ? anyone helps me thanks :o :o
View 3 Replies View Relatedi have a database wich is part of a vb.net project tha database worked fine..i wanted to change the location of the mdf file to the application folder so i copied it to that folder but then i tried to attach it to the server using the management studio right click database select attach that opened the add dialog box with the tree to locate the mdf file but the tree does not expand into the application folder and i can't get to the mdf file.so i tried to attach with attach command and i got the error message that access is denied error 5.i checked the security settings in all files and parent folders and everything seems ok
View 1 Replies View RelatedAn original database (eg A.mdf) is imported/exported to a different server as named B.mdf. The detach of A.mdf was unitentionally not done. It seems that both the database were updated.
A.mdf - 123000KB 25/12/2003
A_log.ldf - 14000KB 25/12/2003
B.mdf - 67000KB 25/12/2003
B_log.ldf - 1024KB 25/12/2003
In this case, which mdf & ldf should be the correct database?
If I I remove A.mdf database by "detach", will B.mdf database work?
SQL server 2000 and SP3 installed.
Assistance is appreciated