i have a report that contains a sub-report that is embeded in one of the textboxes of the table. what i am trying to do
is have the main table toggle visilibity based on the value of the sub-report...in my case the toggle is very simple - if the sub-report returns any value at all, then i need the row in the parent table to be 'visible'
any help would be greatly appreciated.
thanks!
-dk
I want to toggle the visibility of a report item in my page footer based on whether or not a particular subreport has been rendered.
The report has 3 subreports. The subreport above the subreport in question can span several pages, so the subreport I want information on can render on page 1 (for a short report) or page 12 (for example) on a longer report.
Is there a way to determine within the main report when a particular subreport has been rendered and is currently visible?
Thanks in advance for all replies.
John
Hi, currently I am using a matrix of the below format:
Column Grouping
a) Months (From dataset)
b) Amt | Cnt | Ave (Static)
Desired Collapsed View
Jan Feb Mar
Ave Ave Ave
Figures 10 20 30
Current Collapsed View
Jan Feb Mar
Ave Ave Ave
Figures 10 20 30
Expanded View
Jan Feb Mar
Amt Cnt Ave Amt Cnt Ave Amt Cnt Ave
Figures 100 10 10 200 10 20 300 10 30
Issue Faced
When viewing the RS report online, the months cell do not "shrink" even though Amt & Cnt columns were hidden in the Collapsed View.
When the report was exported to excel, the desired collapsed view was showed where the months cell were "resized" when the drilling is collapsed.
Question
Is there any setting required to enable the months cell to "auto shrink" when Amt & Cnt columns are hidden?
Thanks for your help.
how visibility can be toggled between two textboxes in ssrs? For example if textbox1 is visible and textbox2 is hidden initially and textbox2 should be visible when clicked on textbox1 and textbox1 should go invisible when textbox2 is shown... and then again when clicked on textbox2, textbox1 should be visible and textbox2 should go invisible.In a short, it is like switching visibility between 2 textboxes... A click on first textbox should display the second textbox and another click on second text box should display first text box.I cannot provide parameter as it is not there in the requirement. how to toggle the text within a single text box to fulfill above requirement...
View 1 Replies View RelatedI have a matrix with two row fields. The second one doesnt show unless i press the toggle button on the first row field. How can make the first row field automatically expanded to show the second row field?
Thanks.
Hello,
I'm using SSRS 2005
I'm trying to write an expression for the "Hidden" property of a column in a table. The column is only populated with data if the group on my table is open. If the group is collapsed, then the column is empty. I'd like to make the column hidden if the group is collapsed. So I'm thinking it would be something like this:
=Iif(Table_1_Group.Hidden = "True", "True", "False")
But I can't find anyone who has written this anywhere.
I'm basically trying to make this report do the same thing a matrix does, but the matrix doesn't let me label the columns. I put textboxes above the matrix in line with the columns, but when I deploy the report to ReportManager, the textboxes get thrown all over the place and don't line up with the columns anymore.
So I guess if you can't answer the first question, an alternate question I have is how are you supposed to label the columns (row groups) in your matrix? They don't have headers, if I try to line textboxes up with them they get all messed up during deployment. They have that textbox up there in the top left corner that runs across the top of all of the row group columns, but if I put labels separated spaces in that textbox, the spaces get removed in rendering so the text is pushed all to the left and doesn't line up anymore.
Thanks,
Andy
i want to display the reportheader and footer of a sub report from master report eventhough there is no data is populated for subreport.
View 1 Replies View RelatedHi,
I'm wondering if it's possible in SSRS 2005 to have an image's hidden expression to depend on if some table in the report has no rows.
Thanks,
Liron
Hi,
I have a report that is conditionally showing a textbox based on the previous entry that is working correctly.
My issue is that the non visible entries are still being added to my Sum statement at the end of the report.
I need a way to exclude an entry based on its visibility.
Any help would be greatly appreciated.
Hello,
Is it possible to display a value, based on a result of a comparrison?
For example:
If the compression is true then I want to see value '1', if the compression is false, I want to see value '2'.
Thx for help
When you set a row's hidden property to true, RS writes a white row. Is there a way to keep the background color the same is it was before the row was hidden and just not display the data?
Can you do a IIF(Hidden=True) expression????
Thanks.
I have two tables that are related by keys. For instance,Table employee {last_name char(40) not null,first_name char(40) not null,department_name char(40) not null,age int not null,...}Employee table has a primary key (combination of last_name and first_name).Table address {last_name char(40) not null,first_name char(40) not null,street char(200) not null,city char(100) not null,...}Address table has a primary key (combination of last_name, first_name andstreet in which (last_name, first_name) reference (last_name, first_name) inemployee table.Now I want to delete some rows in Address table based on department_name inEmployee table. What is sql for this delete?I appreciate your help. Please ignore table design and I just use it for myproblem illustration.Jim
View 1 Replies View Related
Product version : SQL Reporting Service 2005 with SQL SP2
It's a report with 3 sub-reports in it, i want to display only one of the 3 sub-reports at a time depending on 1 or 2 parameters received by the parent report. These parameters are verified by an expression into the visibility tab of each sub-report. The two parameters are 2 lists with possibles values between 1 and 2 (not query based). I have verified these values and they are correctly received by report depending on the selection of each list.
Ex.: SubReport1.expression = IIf(Parameters!Regroupement.Value = 1, True, False)
SubReport2.expression =IIf(Parameters!Regroupement.Value = 2 AND Parameters!SautPage.Value = 1, True, False)
SubReport3.expression =IIf(Parameters!Regroupement.Value = 2 AND Parameters!SautPage.Value = 2, True, False)
So here are the posibilities :
when Regroupement.Value = 1 --> SubReport1 will be shown
when Regroupement.Value = 2 AND SautPage.Value = 1 --> SubReport2 will be shown
when Regroupement.Value = 2 AND SautPage.Value = 2 --> SubReport3 will be shown
Now why that doesn't work ? I always see the same report and it's not the right one displayed even i change the selection of my 2 lists for the parameters value.
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale.
In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD.
That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD
That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I need a SQL Script to accomplish this. thanks
I have 2 tables with 2 fields in common between them. How do I get a count of rows in table 1 but not in table 2 matching those 2 fields? Thanks.
Hi,I wish to create new rows of data based on a source table. Example: Ihave a file that contains a SESSION (time roughly a calendar quarterfor a University), START_DT, END_DT.I want to create rows that would be for each session and each day, sofor session 200102 that starts 09/10/2000 and ends 12/15/2000 I want 96rows, with 200102 for Session, and the 96 days in DAY.-- Source table:CREATE TABLE [F___Example_Date] ([SESSION_ID] [numeric](19, 0) NOT NULL ,[START_DT] [datetime] NULL ,[END_DT] [datetime] NULL) ON [PRIMARY]-- Sample data :INSERT INTO [DS_V5_Source].[dbo].[F___Example_Date]([SESSION_ID],[START_DT], [END_DT])VALUES(200102, '2000-09-10', '2000-12-15')INSERT INTO [DS_V5_Source].[dbo].[F___Example_Date]([SESSION_ID],[START_DT], [END_DT])VALUES(200103, '2001-01-04', '2001-03-26')-- Example Target file to be populated:CREATE TABLE [Target_Date] ([SESSION_ID] [numeric](19, 0) NOT NULL ,[Day] [datetime] not null) ON [PRIMARY]GO-- Example of inserts to that represent the desired results (my insertif for illustration only, not intended to be elegant)INSERT INTO [DS_V5_Source].[dbo].[Target_Date]([SESSION_ID], [Day])VALUES(200102,'2000-09-10')INSERT INTO [DS_V5_Source].[dbo].[Target_Date]([SESSION_ID], [Day])VALUES(200102,'2000-09-11')INSERT INTO [DS_V5_Source].[dbo].[Target_Date]([SESSION_ID], [Day])VALUES(200102,'2000-09-12')INSERT INTO [DS_V5_Source].[dbo].[Target_Date]([SESSION_ID], [Day])VALUES(200102,'2000-09-13')-- <... and so forth for all days between 9/10/2000 and 12/15/2000...>INSERT INTO [DS_V5_Source].[dbo].[Target_Date]([SESSION_ID], [Day])VALUES(200102,'2000-12-15')My need is getting into a new area of my SQL experiance and I'm notsure how to approach solving this problem. I'm confident once I learnhow to solve this, I will be able to do a lot more with SQL.TIARob
View 3 Replies View RelatedI have one main report which has 5 subreport. i dont want to show all the sub reports all the time. i want to suppress any subreport based on some conditioned. can i do it in case of the SSRS. How?
View 2 Replies View RelatedI have two charts which are based on their own separate datasets. One chart shows data aggregated by MONTH, the other chart shows data aggregated by WEEK. I have put both of these charts inside a rectangle and set their visibility based on whether or not there is data returned by their respective datasets. This part is working just fine.
However, I have added a tablix to the report, deleted all columns and rows leaving only one remaining row/column so it looks like a textbox. This tablix is sitting on top of the two charts. The problem i'm having is that when both charts return no data and they do not show up in the report, the tablix still remains visible. I need to set the visibility but based on a condition between the two different datasets behind each chart.
Here's what I need: If ONE of the charts returns data, then I need the tablix to be visible. If neither chart returns data, then I need the tablix to be invisible. I'm trying to write an IIF statement comparing the two datasets but I get inscope errors. Isn't it possible to compare values which are contained in two separate datasets in SSRS?
Seems like something like the following logic should work:
IIF(CountRows("Monthly_DataSet") > 0 OR CountRows("Weekly_DataSet") > 0 , FALSE, TRUE)
Obviously the above expression will return syntax errors, but you'll get the point as to how i'm thinking. How can I set the visibility of the tablix based on these two charts?
Hello All
I am trying to figure out if what i am attempting to do is possible and whether or not my approach is wrong to begin with.
I am trying to build a custom report for our accounting system which is Traverse from Open systems. This is what i have done in the stored procedure thus far
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER PROCEDURE rptArFLSalesByCustItemized_sp
@custId pCustID,
@dateFrom datetime,
@dateThru datetime,
@itemIdFrom pItemId,
@itemIdThru pItemId
as
set nocount on
-- define some variables for previous year
declare @LYqty int, @LyAmt money, @LYfrom datetime, @LYthru datetime
-- set defaults
SET @itemIdFrom=ISNULL(@itemIdFrom,(SELECT MIN(itemId) FROM tblInItem))
SET @itemIdThru=ISNULL(@itemIdThru,(SELECT MAX(itemId) FROM tblInItem))
SET @LYfrom=DATEADD(YEAR,-1,@dateFrom)
SET @LYthru=DATEADD(YEAR, -1, @dateThru)
-- create small temp table to hold customer info
Create Table #tmpArCustInfo
(
custId pCustID,
custName VARCHAR (30),
)
-- populate customer temp table with info
Insert into #tmpArCustInfo
select custId, custName
from tblArCust
WHERE custId = @custId
-- create a temp table to hold the Data for each Item
Create Table #tmpArSalesItemized
(
itemId pItemId,
productLine VARCHAR (12),
pLineDesc VARCHAR (35),
descr VARCHAR (35),
LYQtySold int,
LYTDQtySold int,
QtySold int,
LYTDsales money,
totalSales money,
LastInvDate datetime,
)
-- populate the temp table with all of the inventory items
insert into #tmpArSalesItemized
select ii.itemId, ii.productLine, ip.Descr, ii.Descr, 0,0,0,0,0, NULL
from tblInItem ii, tblInProductLine ip
where ip.productLine = ii.productLine
AND ii.itemId BETWEEN @itemIdFrom AND @itemIdThru
-- update table with this years quantities
update #tmpArSalesItemized
SET QtySold = (select SUM(QtyOrdSell) from tblArHistDetail hd
where TransId IN (select TransId from tblArHistHeader where custId = @custId)
AND orderDate IN (select OrderDate from tblArHistHeader where OrderDate BETWEEN @dateFrom AND @dateThru)
AND hd.partId BETWEEN @itemIdFrom AND @itemIdThru
GROUP BY hd.partId
)
-- Return the temp tables results
select * from #tmpArSalesItemized, #tmpArCustInfo
drop table #tmpArSalesItemized, #tmpArCustInfo
return
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
My problems begin where i want to start updating all of the Qty's of the QtySold field. I have managed to get it to write the same sum in every field but i cannot figure out how to update each row based on the sum of the qty found for that item in the tblArHistDetails table, trouble is too that there is no reference to the custId in that table either. The custId resides in tblArHistHeader and is linked to the details table via the TransId column. So really i need to update many rows based on criteria from 2 other tables.
Can anyone please help? I dont have a clue how to make this work, and most of what i have learned about sql thus far has been from opening other stored procs etc in the accounting system and just reading to see how the developers have done things.
Thanks
Jamie
I wish to build a table based on values from another table.I need to populate a table between two dates from another table. Usingthe START_DT and END_DT, create records between those dates.I need a new column that is the days between the date and the MID_DTThe data I wish to end with would look something like this:PERIOD DATE DAY_NO200602 2005-07-06 -89200602 2005-07-07 -88200602 2005-07-08 -87<...>200602 2005-10-02 -2200602 2005-10-03 -1200602 2005-10-04 0200602 2005-10-05 1<...>200602 2005-12-18 75CREATE TABLE "dbo"."tblDates"("PERIOD" CHAR(6) NOT NULL,"START_DT" DATETIME NULL,"MID_DT" DATETIME NULL,"END_DT" DATETIME NOT NULL)INSERT INTO tblDates VALUES('200505',2005-04-12,2005-07-05,2005-09-12)INSERT INTO tblDates VALUES('200602',2005-07-06,2005-10-03,2005-12-18)INSERT INTO tblDates VALUES('200603',2005-10-04,2006-01-17,2006-03-27)INSERT INTO tblDates VALUES('200604',2006-01-18,2006-04-10,2006-06-19)INSERT INTO tblDates VALUES('200605',2006-04-11,2006-07-04,2006-09-11)INSERT INTO tblDates VALUES('200702',2006-07-05,2006-10-02,2006-12-18)
View 7 Replies View RelatedI have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT.
I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId".
What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display.
Sample:
ProjectId - SiteId
1 - 5
1 - 9
1 - 16
1 - 18
1 - 20
1 - 27
1 - 31
ProjectId stays the same, only values for SiteId are being different.
I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
how can I update Table 1 to get desired results?
I have to select rows from a table
if the first 2 characters of a 12 char column are
'GB'
Select BFKEYC from table where
I have a hokey way of doing it but it looks embarrassing:
BFKEYC GT 'GA9999999999'
AND BFKEYC LT 'GC'
I have a table in which each record has a initial date and a final date. I would like to create I query that gives me one row for each month between the initial date and the final date. It would be something like this:
Original:
Product|price|initial_date|final_date
A|20.50|2014-08-10|2014-10-01
B|50|2015-01-15|2015-02-20
Resulting view:
A|20.5|2014-08-01
A|20.5|2014-09-01
A|20.5|2014-10-01
B|50|2015-01-01
B|50|2015-02-01
I would like to do that, because these dates correspond to the time in which the products are in possession of sellers, so I would to use this resulting query to generate a pivot chart in Excel to illustrate the value of the goods that are with our sellers in each month.
Is it possible to do it? I think I could do that direct in VBA, but I think that maybe it would be faster if I could do it directly in SQL.
By the way, I am using MS SQL Server and SQL Server Manegement Studio 2012.
Hi,
I have a subreport added to the main report and I want to make this report visible only when the parameter value is met.
Ex, I have a parameter CustName in the main report and want to show the subreport when the custName = xxxxx. There reports are parameter driven not data driven reports.
Any help is greatly appreciated.
Thanks,
Sirisha
I have a main report and a subreport. Subreport is not at row level but is at report level. The sub report has a parameter that needs to be passed from mainreport. However, the subreport's parameter should be set and the subreport should be refreshed when the user clicks on a row in mainreport. Can I use drill-through / navigation feature in any way to build this functionality?
Any help will be most appreciated.
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1
SET FeeInvalid = 'Y'
FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID
WHERE t1.CustID = t2.CustID
AND t2.OrderDate > t1.OrderDate
AND t2.FeeDate > t1.CancelledDate
CREATE TABLE [dbo].[MockData](
[OrderID] [float] NULL,
[code]....
I have a results table that was created from many different sources in SSIS. I have done calculations and created derived columns in it. I am trying to figure out if there is a way to remove duplicate rows from this table without first writing it to a temp sql table and then parsing through it to remove them.
each row has a like key in a column - I would like to remove like rows keeping specific columns in the resulting row based on the data in this key field.
Ideas?
Thanks,
Ad.
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
Hi,I have a report with various tables, some of them can be empty.
When empty, and hidden property set to false only one line apears blank in my report, but if i set the hidden property to true it results in an empty space with the same height as the table i´m trying to hide.
My goal is to have no blank spaces at all when a table is empty.
Anyone can help??
thanks.
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
Greetings,
I have five rows in a group header.
The top row is a true header row with details that will always be there and will always be visible.
The bottom four rows have their Visibility.Hidden property set to 'TRUE'.
All four of the bottom rows are assigned the same Visibility.ToggleItem.
Of the four bottom rows, any or all of them may not have data at any one time.
I want to find a way of allowing the rows to toggle from hidden to visible, but if one or all of the rows have a field item whose value is 0 then that row must remain invisible regardless of whether it is toggled.
I am still working on this puzzle, but if someone can provide me with an easy solution while I struggle, I would greatly appreciate it.
Thanks!