We have two seperate domains (connected via a VPN Tunnel over the internet) We want to replicate one table with a push publication between these two domains (both have sql server 2005 default instances) how do you figure out what ports to open up in order to be able to do transactional replication (of one table) between them????
View 1 RepliesIs it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
Dear all,
I have 3 server in 3 locations, I need to add one Field to one of my table. When I try with "sp_repladdcolumn" I got this error
"Schema replication failed because database <Database name> on server <Server Name> is not the original Publisher of table <Table name>"
please help me on this.
Thanks
I’ve recently taken on a SQL Server related assignment with a client running a very large database in a very poor environment.
We have a 200GB database with virtually no failover support. I’m interested in transactional replication, hardware redundancy, failover support and find that before moving forward on that we probably need to seriously re-evaluate our whole logical and physical design. My experience is more on the TSQL side rather than full dba hardware, optimization, tuning areas. Any suggestions for quickly ramping up my skills on the dba side (books, courses, etc.) and also recommendations for short term support resources would be appreciated. I’m want to make sure I cover all my bases with regard to future scalability, disaster recovery, high availability etc.
Hi.
I have to know how SQL Server 2005 implemens the diferent kinds of replication... like update-anywhere, workflow, snapshot...
Could someone help me find these answers?
Dear All,
Greetings!!
I have installed SQL server 2005 Express and SQL server Mobile, and I was reading the Books online section to find out how to maintain the two databases consistancy.
Found : replication Option.
Problem : It only shows Local Subscriptions in SQL Server and In SQL Server Mobile only Subscription. I dont get a Publication Option.
Please correct if Wrong : SQL Serv Mobile is the one should Publish and SQL Serv hould Subscribe ya?
Please help me to sort this out.
I have just setup my first Transactional replication between two
servers. Next I needed to test what would happen if the live server
went down.
I disconnected the live server and connected it to the backup server
(doing all the ip setup bits as well). Then I tried running my web app.
The web app ran great. I can look at the data that was replicated. My
problem is that I cannot seem to add any data. Ever time I try to run a
stored procedure, the web app crashes with 'sa' account login failed. I
tried running the stored procedures through SQL Query Analyzer, and it
says the same thing.
I know there is no problem with the sa account, as I can view the data
using this. There are no permissions set on any of the objects in the
database. The only thing I can think of is that the replication has
somehow disabled the ability to add data to the replicated database.
Can anyone point out what is happening?
Hi,
I need a solution ( if this is possible) to automatically generate create scripts for my replications on our live server and put that into a file.
I dont have permission to scrip that from the Enterprise Managger, but the support have and can make a job in the live server for this.
So that would be enough for me to put a job to the live server what puts the scripts to a file.
I want to use the same replications in my test environmnet, and they are always changing and I dont want to wait for the support.
I have an idea, but I still dont try it:
If I run a trace, when i push the generate sql script button, maybe I can get the code for the generating the create script.
:confused:
Is there a simple solution for this problem, or I have to get it from the trace ?
Thanx!
Tsabi
Hi All,
i need help. i have a merge replication running every 10 minutes. the replication is for 1 database consisting around 50 tables and all 50 tables are marked as article to be published. let's say the publisher is server A and the subscriber is server B. for explanation purpose, let's pick 1 table from the database, let's say table X
in server A, there are applications running that insert and update table X. in server B, there are applications running that select and delete table X. table X at average, has tens of thousands rows.
now comes the problem, every 10 minutes whenever the sql merge agent is running, sometimes whenan application insert a row to table X in server A, it returns an error : "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.". when i stop the replication (delete the subscriber), the row insertion to table X in server A seems fine. then i come to a doubtful conclusion, that the timeout error happened because when the insert statement executes, the replication locks the table for merging.
could somebody verify this? if my conclusion is true, then how am i suppose to do this? (see bold text above). really2 appreciate the help
Hey all,
I need your help again..We are having many domains. Actually
we have created SQLgroups in sql and granted permissions in our domain.
But guys from other domains are just entering into their query analyser
and accessing the sql server..They are not at all falling under our SQLgroups.
We have given trusted connections between domains..
My question here is
Is there anyway that there should be an option to select the domain
before they log in thru query analyser? Like Nobody should enter
from their domain ...only through our domain they should enter..?
Please help me out..
Thank you
Andrew.s
Hi, I have two SQL servers in different domains(A and B), I cant use
the Enterprise Manager to register eachother...they show me "Sever doesnt exist" but when I use ping I can show them....
Please help me.....What can I do?
cedutang.
I'm attempting to set up a dts transfer SQL 7 box to SQL 7 box. These two servers are on two separate NT domains with no trust relationship, and I will be sending the info across a VPN.
Anyone out there have a similar situation? Offer any recommendations, pitfalls, ports used, ways to do this??? I'd appreciate any ANY ideas on how to make this work. Thanks in advance.
-Tricia
Is there any way to connect to SQL Server from a non trusted domain. Passthrough authentication works for other NT Server resources (like exchange folder, printers, shared folders), but SQL Server 7.0 does not seem to accept this passthrough authentication (where the username and password are the same in both domains). There is no internet access required.
View 1 Replies View RelatedI need to move three sql 6.5 servers over from one domain to another domain. What is the best way to do it and what should I look out for? I am really new at this so any help would be great.
Brian
I have situation like this:
Company with one head office and one remote office. In the two offices I have two domains with two PDCs. The two networks are connected with eachother through leased line and the routers are configured properly. The SQL Server is on the PDC in head office and "local" clients connect fine. I cannot connect from the remote office. I think that I have folowing solutions:
1. make trust relationships between two domains - it will be hard a little bit because second PDC is samba on linux
2. make all clients in remote office to be members of the head office domain - potential problems if the leased line drops
3. make all clients to log in with same account as SQL Server logs locally - stupid
4. something else - what?
Thanks in advance!
Daniel
I have a sql-table. The domain of one of my columns a fix number of string values (like "blue", "green" and "yellow"). However, there is a big likelyhood that the domain will be expanded by more string values in the future (however, none of the existing string values will ever be discluded from the domain). How would I go about enforcing that all strings added to my column in my table is within my domain?
Should I use a check constraint, or create a domain, or sholud a create another table with the domain values and use a foreign key? What would be best practise for my problem?
I not too hot on networking. When I type "IPCONFIG /ALL" the "Prmary DNS Suffix" is empty. Does this mean I have no domain? Can I configure a mirror on this server?
Thanks in advance.
Hello,
First
I would like to replicate databases from an SQL 2000 Server to a SQL 2005 Server.
a. First can this be done?
b. Does it matter if both servers are on different domains?
Secondly
If all is possible from my above questions, in order for me to enable replication on the SQL 2000 Server, i need to rename the server from LOCAL to a realname. I get an error message saying that it can not use nicknames.
a. If I go ahead and make a New SQL Server Registration, could this have a major impact on the applications using the Database server?
b. When renaming, do I first Delete the current server registration or should I first create the new one then delete the old one?
Thank you very much in advance
Viual Studio 2003; ASP.Net; .Net Framework 1.1, SQL Server 2000Hi,We have two domains in our network - prod.domain.com and dev.domain.com. There is no trust relationship between the two domains. I am trying to connect to an SQL Server in dev.domain.com using SQL Server Authentication from prod.domain.com. My connection string uses the fully qualified domain name (xxxxxx.dev.domain.com) to connect. The error I receive is SQL Server does not exist or access denied. I can access the database through SQL Query Analyser and SQL Enterprise Manager across the domains with no problems. I can also connect through a .udl file using the same SQL Server Authentication information.If I run my application from dev.domain.com accessing a database that sits in prod.domain.com then the connection is fine.Can someone point me in the direction of any areas I can troubleshoot to see what is preventing the connection please? The only things I can see on the web are details of windows authentication across domains which isn't relevant to me in this instance. I've been pulling what little hair I have out over this for the last week.Thanks in advance.
View 3 Replies View RelatedWe are testing merge replication. Between servers on one domain, it works fine. Between servers on different domains, appears to work while configuring the Publisher and Push subscribers, but then errors appear after configuration. One error is that the Merge Agent could not connect to the subscriber.
The SQL Service accounts and passwords are the same on both servers. We also configured a one-way trust (maybe it is the wrong way)Subscribers trust the Publisher, and SQL service accounts added to local admin group on subscribing systems.
Anything else I should try?...modify publisher access list?
Thanks for the help.
Christi
Hello,
I have a problem scheduling an Object Transfer task on a server that is in a different domain than the server it is getting the data from. I can set up the Object Transfer through the Tools/DatabaseObject Transfer... option and run it manually (works great), but if I schedule it to run, it stops after about 30 seconds and gives an error message "Process Exit Code 1. Cannot connect to source server." Any ideas would be much appreciated. Thank you
Ryan
We have installed SQL servers in 3 domains. We cannot see the servers in Enterprise manager in the other domains from any other domain. Trusted security is set up. Named pipes is the set protocol as we made no changes at install time. We can see the NT servers in the Server manager. All services are running. Is there something that I missed? Any help will appreciated.
View 1 Replies View RelatedI have a network that has 10 machines-6 of them have sql server registrations. I am able to access all 6 from any machine while they are on the domain. However I also need to take 5 of them off of the domain to a remote site and set up a workgroup. I am able to log in to each sql server from the workgroup login but I am not able to run software on one machine that connects to a sql server registration on another machine in the workgroup. I get a "sql server does not exist or access denied" message. Further, when I open enterprise manager, the other sql servers don't show up and I am unable to add them using the wizard.
Any help would be much appreciated.
anybody have the syntax floating around their heads to use DOS copy between 2 domains.
i think it is something like so ...
copy C:PathToMySQLServerMSSQL.1MSSQLBackupReportSe rver* remote_host=\10.0.0.0ackup" myusername@mydomain.com;mypassword
Hi
i wanna connect to a server that is installed with domain registration and using both sql and windows authentication.on this server i have created database and login for that respective database,but when i am trying to connect this server it gives me error. The login that i m using is able to connect when i m trying to connect server from console of the server.Please help me..
Chander
Hi everybody,there are several SQL-Server 2000 databases within a company locatedon different servers in different domains. On every database you canfind the same table X.I want to merge these tables X (UNION query) and print the result witha Crystal Report.Unfortunately I only have little knowledge on security, domains,distributed applications.Thanks for help.
View 2 Replies View RelatedI am testing the e-mail subscriptions to my hotmail account in anticipation of sending e-mail reports to our business partners. I have made the following to the RSreportserver.config file:
<PermittedHosts>
<HostName>mydomain.com</HostName>
<HostName>hotmail.com</HostName>
</PermittedHosts>
I then stopped and restarted the reporting services service. However, the test subscription fails with the following message:
The e-mail address of one or more recipients is not valid.
Any idea what I may be missing?
We have 2 servers each having a domain (i.e. 2 domains) running
Windows Server 2003
Standard Edition
Service Pack 1
We would like to have one of the servers replicate/mirror the data on to the other but we are getting this error
The error produced from the mirroring part is:
TITLE: Database Properties
------------------------------
An error occurred while starting mirroring.
------------------------------
ADDITIONAL INFORMATION:
Alter failed for Database 'CTSM'. (Microsoft.SqlServer.Smo)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The server network address "TCP://UM_db_live.UMlive.local:5022" cannot be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational. (Microsoft SQL Server, Error: 1418)
Thank you.
Hi,
I have bulk insert statement thats need to be run on two different domains. It is working when the files are on same domain. But failing while copying from two different domains.
Does anyone know how to implement this ?
BULK INSERT abc.DBO.table_200709
FROM 'IPADDRESSSourceTEST_FLATFILE.txt'
WITH
(
FIELDTERMINATOR =' |',
ROWTERMINATOR =' |'
)
Hi,
My problem is somewhat like this that, i want to connect my all applications (developed in asp.net) to one database. In other words i want to make a centralised database that can be accessible from the application running at the different domains. When i did so by using the same username, password, database and server...i recieve an error that, "connection cannot be establised".
If any body have the solution for this problem. then please do write the "connection string" for me that can be efficiantly used on the applications running on differnt domains.
Thanks and Regards,
Steve Dcosta
I have to maintain several SQL Server 7 DBs across multiple NT Domains (same network). How do I access the SQL Server on the second domain from enterprise manager?
Thanks!
Lia
Has anyone been able to successfully use the database copy wizard to copy databases between domains?
I've got a SQL 7.0 database on domain A. I need to move it to domain B and upgrade it to SQL 2000.
Thanks
Sharon
Can we setup a replication ( publisher and subscriber are Sql server) between two different domains, basically different company databases.
View 1 Replies View Related