Tricky UPDATE Statement
Jun 16, 2006
I need to update each record in a table based on selected values from that same table.
The table contains 3 money fields (ActualRev,ScheduledRev and TransRev )
There is also a stageNumber value in the same table.
What I need to do is update the TransRev field in each record based on the stageNumber.
If (stageNumber = 1)
I need to set TransRev to (ScheduledRev where the stageNumber = 0 and then subtract (ScheduledRev where the stageNumber = 1)
If (stageNumber = 3)
need to set TransRev to (ScheduledRev where the stageNumber = 2
If (stageNumber = 4)
need to set TransRev to (ScheduledRev where the stageNumber = 2 )+(ScheduledRev where the stageNumber = 3 )
If (stageNumber = 5)
need to set TransRev to (ScheduledRev where the stageNumber = 2 )+(ScheduledRev where the stageNumber = 3 ) +)+(ScheduledRev where the stageNumber = 4 ) ... if ScheduledRev is a positive moneyary value
else if it's negative then TransRev needs to be set to (ScheduledRev where the stageNumber = 6
here's what I tried for StageNumber=3
UPDATE PSIstageDetails_Map
SET ValueUsdTransparent = (select ValueUsdScheduled
FROM PSIstageDetails_Map
WHERE NewStageNumber = 2 )
WHERE NewStageNumber=3 but the system complains because I'm pulling back more than one record in the subquery. Do I need to use the primary key id field to narrow it down? If so, how?
thanks for any suggestions...
View 4 Replies
ADVERTISEMENT
Oct 6, 2004
I have a stored procedure called TC3_GetAllJobOrders which takes 8 parameters as filter values and dynamically builds a statement to filter the data. If you pass in null values for the filters, then the data is not filtered.
I want to write another SP called TC3_GetNewestJobOrders which takes 9 parameters. The first 8 parameters are the same as TC3_GetAllJobOrders and the 9th parameter is numRecs which defines the number of records to return. The procedure should call TC3_GetAllJobOrders, sort the data by date and then return the top numRecs. However, I can't figure out the best way to write this stored procedure because it references another one.
I am trying to stay away from dynamic SQL if at all possible. But I am thinking I will have to use dynamic SQL because I don't think the number of records to be returned (as defined using the TOP keyword) can be parameterized. However, I was trying to write a dynamic SQL statement so that the end statement looked something like:
SELECT TOP 10 * FROM ( EXECUTE TC3_GetAllJobOrders ... ) ORDER BY createdOn DESC
However, I guess having the EXECUTE in parens like that is no good and SQL Server doesn't like it. What is the best/correct way to do it?
View 4 Replies
View Related
Mar 10, 2005
Hello,
I have a SQL statement which is working OK:
SELECT diakod,diatexter,skada FROM (SELECT DISTINCT diakod,diatexter,skada FROM Tra_ddl WHERE ( dia_ddl = @Kod) UNION ALL SELECT DISTINCT diakod,diatexter,skada FROM Tra_ddl WHERE ( dia_ddl =@Kod2)) AS SQ GROUP BY diakod,diatexter,skada HAVING COUNT(*) > 1
I need to have a third selector, I have used the following code :
SELECT diakod,diatexter,skada FROM (SELECT DISTINCT diakod,diatexter,skada FROM Tra_ddl WHERE ( dia_ddl = @Kod) UNION ALL SELECT DISTINCT diakod,diatexter,skada FROM Tra_ddl WHERE ( dia_ddl =@Kod2) UNION ALL SELECT DISTINCT diakod,diatexter,skada FROM Tra_ddl WHERE ( dia_ddl =@Kod3)) AS SQ GROUP BY diakod,diatexter,skada HAVING COUNT(*) > 1
This is giving me to many answers, does anyone have any good suggestions to improve it?
View 1 Replies
View Related
Oct 7, 2007
Hi guys,
Im trying to devise a statement with will return a true/false value based on if a field in a related table is null or not.
That is I have two tables: ServiceRepairOrders (Parent Table), LoanPhones (Child Table) related by the field "IMEI_ESN", which is a 15 character string.
When returning a "LoanPhone" record, i need one field "InStore", to return true/false based on if one or more related "CompletionDate" fields in ServiceRepairOrders is null or not.
At the moment I have the following:
SELECT LoanPhones.IMEI_ESN, LoanPhones.BoxNumber, LoanPhones.Make, LoanPhones.Model, [ServiceRepairOrders].[CompletionDate] Is Null AS InStore
FROM LoanPhones INNER JOIN ServiceRepairOrders ON LoanPhones.IMEI_ESN = ServiceRepairOrders.LoanPhoneIMEI_ESN;
But i need to ensure its a "one or more" relationship. That is, if all related service repair orders are complete (i.e. a completion date is supplied - not null), then the IsStore should be "True", otherwise false.
View 5 Replies
View Related
Apr 29, 2008
I have a rather tricky SQL delete query I’m trying to perform, preferably without cursors. I have the following data set, where I want each of the first changes to the status.
IDStatus
1Good
2So-So
3So-So
4Bad
5Bad
6Bad
7Bad
8Bad
9So-So
10Good
So given the above data set I would want to delete the following IDs: 3, 5, 6, 7, and 8. As they not the first in order. The problem is that while I can get isolate and save first instance of each status (in this case 1, 2, and 4), I can’t get the what I want. Is there a SQL way of accomplishing this.
View 10 Replies
View Related
Jun 16, 2007
Hello guys,
I am askng for any help ...i am new at SQL
I want to provide an SQL query to set all the priority to 1 for all customers that have all their orders being for a product with importance of 100.
--------------------------------------------------------------------
There are three tables in the database: Customer, Product and Orders.
The Customer table has three column: Customer_id (PK), priority, Address.
The Orders table has three colums as well: Order_id (PK), Customer_id (FK), Product_id (FK)
The Product table has three columns as well: Product_id(PK), Product_name, Importance.
So the order table is connected to both the product and the customers table by respective foreign key.
-------------------------------------------------------------
I have this so far but it doeant give what i want.
update c
set priority = 1
from customer c inner join orders o
on c.customer_id = o.customer_id
inner join product p
on o.product_id = p.product_id
where importance = 100
View 1 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Aug 13, 2014
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
View 1 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Jul 23, 2005
Hello,I am trying to update records in my database from excel data using vbaeditor within excel.In order to launch a query, I use SQL langage in ADO as follwing:------------------------------------------------------------Dim adoConn As ADODB.ConnectionDim adoRs As ADODB.RecordsetDim sConn As StringDim sSql As StringDim sOutput As StringsConn = "DSN=MS Access Database;" & _"DBQ=MyDatabasePath;" & _"DefaultDir=MyPathDirectory;" & _"DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;" &_"PWD=xxxxxx;UID=admin;"ID, A, B C.. are my table fieldssSql = "SELECT ID, `A`, B, `C being a date`, D, E, `F`, `H`, I, J,`K`, L" & _" FROM MyTblName" & _" WHERE (`A`='MyA')" & _" AND (`C`>{ts '" & Format(Date, "yyyy-mm-dd hh:mm:ss") & "'})"& _" ORDER BY `C` DESC"Set adoConn = New ADODB.ConnectionadoConn.Open sConnSet adoRs = New ADODB.RecordsetadoRs.Open Source:=sSql, _ActiveConnection:=adoConnadoRs.MoveFirstSheets("Sheet1").Range("a2").CopyFromRecordset adoRsSet adoRs = NothingSet adoConn = Nothing---------------------------------------------------------------Does Anyone know How I can use the UPDATE, DELETE INSERT SQL statementsin this environement? Copying SQL statements from access does not workas I would have to reference Access Object in my project which I do notwant if I can avoid. Ideally I would like to use only ADO system andSQL approach.Thank you very muchNono
View 1 Replies
View Related
Nov 9, 2007
It appears to update only the first qualifying row. The trace shows a row count of one when there are multiple qualifying rows in the table. This problem does not exist in JDBC 2000.
View 5 Replies
View Related
Jul 30, 2007
Hello,
I'm writing a fairly involved stored procedure. In this Stored Procedure, I have an update statement, followed by a select statement. The results of the select statement should be effected by the previous update statement, but its not. When the stored procedure is finish, the update statement seemed to have worked though, so it is working.
I suspect I need something, like a GO statement, but that doesnt seem to work for a stored procedure. Can anyone offer some assistance?
View 6 Replies
View Related
Dec 12, 2014
I run the following statement and it will not update beyond 7 million plus rows and I have about 38 million to complete. I keep checking updated row counts and after 1/2 day it's still the same so I know something is wrong because it was rolling through no problem when I initiated it. I need to complete ASAP so it's adding to my frustration. The 'Acct_Num_CH' field is an encrypted field (fyi).
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
WHILE @@ROWCOUNT > 0
BEGIN
SET rowcount 10000
UPDATE [dbo].[CC_Info_T]
SET [Acct_Num_CH] = 'ayIWt6C8sgimC6t61EJ9d8BB3+bfIZ8v'
WHERE [Acct_Num_CH] IS NOT NULL
END
SET rowcount 0
View 5 Replies
View Related
Jun 14, 2007
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
View 3 Replies
View Related
Aug 22, 2007
Dim lblock As Boolean chkChecked = lblock strSQL = "UPDATE CLIENTS SET " If blnCompleted = True Then strSQL = strSQL & "COMPLETED_DT = '" & Format(Now(), "MM/dd/yyyy") & "', " Else strSQL = strSQL & "LAST_SAVED_DT = '" & Format(Now(), "MM/dd/yyyy") & "', " End If strSQL = strSQL & "COMMENTS = '" & FixString(txtcomments.Text) & "' " _ & "WHERE client_ID = " & iclientID & ""I want to put my booleen value lblock to sql too, I probably need value of it, It is checkbox, called chkblock, . how would I include this to update statement database field for that BLOCK =
View 1 Replies
View Related
Sep 7, 2007
Hi, i nid help on update statement. I using 03 and a microsoft sql server 2000 database.
I use a more simple example of my error. A Northwind Database is use to update the Region table(RegionDescription)
User will 1st go in WebForm2.aspx and enter a id, if found will retrieve the data to WebForm1.aspx. User type "1" and retrieve Eastern to TextBox1.
User can choose to update the table by typing in a diff word into TextBox1. But when i type any word(e.g East) the page is refresh back to Webform1.aspx with the not updated data and the database is also not updated. Any idea?
WebForm2.aspx.vb Imports System.Data.SqlClient Public Class WebForm2
Inherits System.Web.UI.PageWeb Form Designer Generated Code Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page hereEnd SubPrivate Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Session("id") = TextBox1.Text
Response.Redirect("WebForm1.aspx")End Sub
End Class
WebForm1.aspx.vb Imports System.Data.SqlClient Public Class WebForm1
Inherits System.Web.UI.Page
Web Form Designer Generated CodeDim cnn As New SqlConnection("Data Source=(local); Initial Catalog=Northwind;User ID=******; Password=******") Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
Label1.Text = Session("id")
retrieveTitle()End SubSub retrieveTitle()
cnn.Open()Dim cmd As New SqlCommand
cmd.CommandText = "SELECT * FROM Region WHERE RegionID = '" + Session("id") + "'"
cmd.Connection = cnnDim dr As SqlDataReader
dr = cmd.ExecuteReader()
If dr.Read() Then
TextBox1.Text = dr("RegionDescription").ToString
End If
cnn.Close()End SubSub UpdateTitle(ByVal title As String)
cnn.Open()Dim sqlstr As String = "UPDATE Region SET RegionDescription = '" + title + "' WHERE RegionID = '" + Session("id") + "'"
Trace.Write(sqlstr)Dim cmd As New SqlCommand(sqlstr, cnn)
cmd.ExecuteNonQuery()
cnn.Close()End SubPrivate Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
UpdateTitle(TextBox1.Text)End Sub
End Class
View 4 Replies
View Related
Mar 13, 2008
I have a SQL Table with the following columns
ID, Date, Meeting, Venue, Notes
What Update statement do i need to update a simple grid view in Visual Studio?I have been experementing but when i click update it updates the whole column insted of the one i was trying to update.
Please can you help? Thanks
View 1 Replies
View Related
Jun 4, 2008
I need some help. please. Here is what I got. From the webpage I can pull the following data to update a table. update Vehicle set Name='TestUnitName' ,Make='TestMake', Model='TestModel', SoftwareVersion='TestVersion', DynamicChange='1', ProviderID='1', Description='TestDescription', VIN='TestVIN', IMEI='TestSIM', EngineTypeId=' ', Phone=' ', MobilePhoneProviderID='' where VehicleID=64 But I also get the error: "The UPDATE statement conflicted with the FOREIGN KEY constraint "FK_Vehicle_EngineTypes". The conflict occurred in database "Telemetry", table "dbo.EngineTypes", column 'EngineTypeId'.The statement has been terminated." How do I solve this issue? Actually what I am trying to do is, when EngineTypeId=' ' , I want to set is to NULL and same for the MobilePhoneProviderID. Any help would be appreciated. Thanks in advance.
View 14 Replies
View Related
May 17, 2004
Hey all,
I need to set a column value where the id is within a string. However, I need to set the column to a default value if the id is not within the string. Hope that was easy to understand!
ie:
This currently works...
SET @strSQL = 'UPDATE tblTest SET Archive = 1 WHERE RecID IN (' + @IDList + ')
If the ID is not in the list then I want that column set to 0. How can I do this?
Thanks in advance,
Pete
View 5 Replies
View Related
Sep 2, 2004
Hi
I use a update sub, the problem is that i got an error, the error is:
Syntax error in UPDATE statement.
I guess the UPDATE statement is:
strUpdate = "Update tblUsers Set UserName=@UserName, Password=@Password, RetypePassword=@RetypePassword, Email=@Email, Comments=@Comments Where UserID=@UserID"
Remark:I use Acceess DataBase, exactly the same code works fine in SQL, i just changed the DataBase(From Access to SQL).
Is the problem can be in other place?
Thank you very much for your assistance.
View 3 Replies
View Related
Oct 14, 2004
Hi, I'm having trouble writing this update statement and was wondering if anyone could help me out :
My database is sort of set up lilke this:
There are 3 tables: Orders, OrderDetails and Inventory
Orders has a pk called OrderID.
OD has several ProductIDs listed for that OrderID
Inventory has 2 fields, the pk InventoryID(which is the same as
ProductID) and QOH
So OD kinda looks like this:
OrderID ProductID Quantity Cost
192 12 2 $10
192 3 1 $12
192 14 2 $50
193 12 1 $11
.... .
...
...
so what i want to do is take each productID for a specific orderid
and decrement the inventory for it by OD.quantity
This is what I was trying
UPDATE Inventory
Set QOH = QOH - @qty
WHERE Inventory.InventoryID IN (
SELECT ProductID
FROM OrderDetails
WHERE OrderDetails.OrderID = @OrderID
and @qty = OrderDetails.Quantity
)
but, i'm having no luck...... any suggestions ?
View 2 Replies
View Related
Dec 15, 2004
what would the syntax be for the following update statement?
"UPDATE [Stocklist]
SET
[client] to textbox2.text
[notes] to textbox3.text
[paid] to textbox4.text
[status] to "old"
WHERE
[Make] = dropdownlist1.SelectedValue
[Model] = dropdownlist2.SelectedValue
[IMEI] = dropdownlist3.SelectedValue
[status] = new"
I know this is a simple question even for someone who is just starting out , thats why I posted it into the "Getting Started" forum.
Thanx in Advance
View 2 Replies
View Related
Feb 15, 2001
Hi,
I am a SQL Novice - I have a table called 'users' in which I need to modify the user's email id e.g., from seanu@hotmail.com to seanu@yahoo.com and I have over 150 rows where I should be changing 'domain' name only..
Any help with an Update Statement is highly appreciated..
Thanks,
-Srini.
View 2 Replies
View Related
Oct 27, 2000
I have a table that looks like this.
tkinit adir adate1
0007 0.00 01/01/1996
0007 0.00 01/01/1997
0007 25.00 01/01/1998
0007 27.00 06/01/1998
0008 0.00 01/01/1996
0008 0.00 01/01/1997
0008 32.00 01/01/1998
0008 37.00 06/01/1998
I need to populate the adir field where the adate < 12/31/1998 with the rate where adate = 01/01/1998.
I cant seem to figure out exactly how the statement should go so that I populate each timekeepers rate with their specific rate.
Thanks
Jason Fitch
View 2 Replies
View Related
Sep 27, 1999
Is there any way to create a "dynamic" update statement in a stored procedure?
Lets say I want to choose whether to update all columns in a table or just one. If I want to update just one column, is there a way to make the other columns keeping their values instead of NULL?
Thanks!
Pete
View 1 Replies
View Related
Aug 29, 2003
I am looking for a solution to my unique problem.
myTable is having following records
ID Field1 Field2 Field3 Field4
1 x y 100 0
2 xx zz 5 0
3 x y 200 1
4 a b 1 1
5 a b 2 0
6 k L 78 1
7 aa bb 25 1
8 k L 15 0
Now the problem is if I want to update a latest record's(if you go by ID)Field4 with 2 for the records where Field1 + Filed2 is unique, can I do this in a single query?
I can select the unique record by the following query
select Field1,Field2 from myTable group by Field1,Field2 having count(ID)>1
Any ideas?
View 4 Replies
View Related
Mar 3, 2008
Hi first post, so apologies if this is in wrong forum.
I am needing to update a field in one table, where a particular value of another table is TRUE, and update that table based on a common field in both tables.
at the moment my query is:
IF EXISTS (SELECT * FROM _tblSnapShotAUSProfServicesOrderLines_Daily
WHERE _tblSnapShotAUSProfServicesOrderLines_Daily.Produc tRelProductName like 'Prof%')
UPDATE OrderHeader_details
SET ServicesSold = 'Y'
WHERE OrderHeader_details.OrderRef = _tblSnapShotAUSProfServicesOrderLines_Daily.OrderR ef
In its current format, I get the column prefix is incorrect which makes sense sort of.
No matter which way I change this, I cannot get the query to work. I one form, it works but essentially performs two seperate statements, one with the select, and one with the update which unfortunately updates every row in the table.
Any assistance is appreciated.
Mick
View 1 Replies
View Related
Sep 24, 2007
Hello,
I need help with a sql update statement i need it to convert a datetime value to a specific format. For some reason it statement will only update the row only when i convert the datetime value to a varchar, i ran it in mssql sql server management studio and it works, the database is a mssql 2000 i think. If i try to compare the datetime value and they are both DateTime values it fails, if i convert them to varchar and run them they succeed, what i also noticed is when when are date values are that the value i passed in the query is that they are in a different format, i guess the database stores them as mon/dd/yyyy hh:mm:ss. but when i run the query that failed i get this as the results of the values from variables @Date1 & @Date2: They are the same and they failed. So if anyone knows any thing any help is surely appreciated this really sucks.
Failed
Date 1: Sep 23 2007 9:54PM
Date 2: Sep 23 2007 9:54PM
---------------------------------------------
Need help with making this work in C#:
Code:
string sql = string.Format(
"UPDATE [Contact Sheet] SET CallAttempt1 = {0}, CallAttempt2 = {1}, "
+ "CallAttempt3 = {2}, Status = '{3}' WHERE ContactID = {4} AND ModifiedDate = 'CONVERT(VARCHAR(50), {5}, 0)'", ..............................);
This statement ran in MSSQl Studio Management and works:
Code:
DECLARE @Date1 AS VARCHAR(50)
DECLARE @Date2 AS VARCHAR(50)
SET @Date2 = CONVERT(DATETIME, '9/23/2007 9:54:40 PM', 0);
SET @Date1 =
(SELECT Convert(VARCHAR(50), ModifiedDate, 0) FROM [Contact Sheet] WHERE CustomerID = 22);
IF @DATE1 = @DATE2
BEGIN
PRINT 'Success'
END
ELSE
BEGIN
PRINT 'Failed'
-- PRINT @TmpDate
PRINT 'Date 1: ' + @DATE1
PRINT 'Date 2: ' + @Date2
END
This one fails everytime:
Code:
DECLARE @Date1 AS DATETIME
DECLARE @Date2 AS DATETIME
SET @Date2 = CONVERT(DATETIME, '9/23/2007 9:54:40 PM', 0);
SET @Date1 =
(SELECT Convert(DATETIME, ModifiedDate, 0) FROM [Contact Sheet] WHERE CustomerID = 22);
IF @DATE1 = @DATE2
BEGIN
PRINT 'Success'
END
ELSE
BEGIN
PRINT 'Failed'
-- PRINT @TmpDate
PRINT 'Date 1: ' + CONVERT(VARCHAR(50), @DATE1, 0)
PRINT 'Date 2: ' + CONVERT(VARCHAR(50), @Date2, 0)
END
View 1 Replies
View Related
May 19, 2005
can I do something like this in update statement
update test
set Code=
Case When Action='D' then 'Failed'end,
from test1
View 2 Replies
View Related
Feb 28, 2006
Hey everyone, first time poster, and this problem has been bugging me all morning.
I am attempting to UPDATE a temp table (#Patient_Bill) with amounts derived from another table using a stored procedure that is used by a Powerbuilder Data Window.
Here is my statement:
UPDATE #Patient_Bill
SET balance_amount =
(select sum(balance_amount) from Payment py WHERE #Patient_Bill.patient_id = b.patient_id)
WHERE #Patient_Bill.patient_id = Payment.Patient_id
My goal is whenever the Powerbuilder data window is called that their "balance_amount" is shown on the data window (only one line since it's specific to patient).
However, whenever this is called I get the following error:
Insert Error: Column name or number of supplied values does not match table definition
Is my SQL code above pulling too many lines? I want only one line to populate in my data window based off the specific Patient_id.
Thanks, and I hope my explanation made sense!
View 6 Replies
View Related
Feb 8, 2008
Hello,
I am trying to update three fields in a tbl (c) from the sum of another tbl (b).
But also tbl (b) also needs to be joined to tbl (a) to meet a criteia.
I also do not want lengthy statement. Could someone tell me what I am doing wrong with my statement below?
UPDATE DBO.HIST3
SET INTRA_WGT = SUM(DBO.HIST2.EXT_TUBE_WGT),
INTRA_MKT = SUM(DBO.HIST2.EXT_MKT_AMT),
INTRA_NET = SUM(DBO.HIST2.GROSS_AMOUNT)
WHERE DBO.HIST3.SHIP_PLANT,DBO.HIST3.BILL_DATE IN
(SELECT DBO.HIST2.SHIP_PLANT,DBO.HIST2.BILL_DATE
FROM DBO.HIST2
INNER JOIN DBO.HIST1 ON
DBO.HIST2.INVOICE_NBR = DBO.HIST1.INVOICE_NBR
WHERE INVOICE_TYPE = 'IP'
GROUP BY DBO.HIST2.BILL_DATE ,DBO.HIST2.SHIP_PLANT)
The table (Hist3) and (Hist2) needs to be joined by two fields to get correct results, but I get the following error msgs.
Msg: An aggregate may not appear in the set list of an UPDATE statement.
Any advise?:S
View 2 Replies
View Related
Feb 12, 2004
hi,
I want to do some thing like:
Update @table1 set col1=(select col1 from table2 where
table2.col2=@table1.col2)
where @table1.col2=table2.col2
here @table1 is a table variable.
I can not get thro this update.Please help.
regards,
harsh
View 1 Replies
View Related
