Trigger On Update No Linked Server

Sep 13, 2007



I have 2 database servers ( 2 hardware-servers : A and B ) and I ve written a trigger for update in server A to execute insert statement in server B through linked servers, is there other way to achieve this without linked servers?? All using T-SQL.

Best Regards

Joseph

View 4 Replies


ADVERTISEMENT

Update Trigger On Linked Server View

Jul 20, 2005

Hi there,I'm pretty new to SQL and am having some porblems with a linked server.I have a table on a SQL server which stores employee information.I also have a view on a linked server which stores the same information.What I would like to happen is, whenever the view changes on the linkedserver I want the information to be changed in the table on my server.I've been trying to write a trigger to do this, but have had noluck so far.Can anyone help me?ThanksSimon--Posted via http://dbforums.com

View 1 Replies View Related

Update On Machine Runs Immediately, Update On Linked Server Takes 8 Minutes

Jan 2, 2008

What's up with this?

This takes like 0 secs to complete:

update xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159

where enc_id in

('C24E6640-D2CC-45C6-8C74-74F6466FA262',

'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',

'D7FBD152-F7AE-449C-A875-C85B5F6BB462')

but From linked server this takes 8 minutes????!!!??!:

update [xxx_servername_xxxx].xxx_DatabaseName_xxx.dbo.xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159

where enc_id in

('C24E6640-D2CC-45C6-8C74-74F6466FA262',

'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',

'D7FBD152-F7AE-449C-A875-C85B5F6BB462')


What settings or whatever would cause this to take so much longer from the linked server?

Edit:
Note) Other queries from the linked server do not have this behavior. From the stored procedure where we have examined how long each query/update takes... this particular query is the culprit for the time eating. I thought it was to do specefically with this table. However as stated when a query window is opened directly onto that server the update takes no time at all.

2nd Edit:
Could it be to do with this linked server setting?
Collation Compatible
right now it is set to false? I also asked this question in a message below, but figured I should put it up here.

View 5 Replies View Related

Trigger/Linked Server

Oct 29, 1999

CREATE TRIGGERReportRequestINSERT_trg
ONReportRequest_tbl
FOR INSERTAS

Can an insert trigger like this successfully insert into a linked server's table?
Replication is NOT an option. And I only need to do it in very limited circumstances anyway.


INSERT INTO
[172.22.202.180].MultiVendor.dbo.ReportRequest_tbl
(
ControlCustomerNumber,
UserID,
ReportName,
RequestedDate
)
SELECT
ins.ControlCustomerNumber,
ins.UserID,
ins.ReportName,
ins.RequestedDate
FROM
Inserted ins

View 1 Replies View Related

Running Query In Linked Server Through Trigger

Aug 2, 2006

i have set up
a linked server. i can query the linked server in query analyzer and
also do update/delete. but when i try to run the same query for linked
server through insert trigger, i get following error: [OLE/DB provider returned message. [Microsoft][ODBC Sql Server Driver]Distributed transaction error].btw, i am using Sql server 2000, SP4. main server is windows 2003 server and linked server is windows xp pro.any suggestions will be appreciated.

View 1 Replies View Related

Problem Using A Linked Server In An Insert Trigger

Aug 24, 2004

I'm writing an insert trigger in one SQL Server database that is supposed to insert another record into a linked SQL Server database. I have the linked server set up and have been using it for a few weeks in queries and stored procedure with no problem. Now that I'm trying to use it within a trigger and it just bombs.

I'm getting the following message in one of my logs and I don't know what it means... "Failed to obtain TransactionDispenserInterface: XACT_E_TMNOTAVAILABLE". I've googled around, but can't really find anything. Any help would be appreciated.

Thanks,
Bryan

View 1 Replies View Related

SQL 2012 :: Using Linked-server During (logon Trigger)

Oct 8, 2015

Used linked-server during logon trigger? is it possible? i know we can access tables, SPs, etc with in that server, if i want to check something in other server during logon trigger, can i do it?

View 0 Replies View Related

Linked Server Referred By Insert Trigger

Jul 23, 2005

Hei,We have 2 MS SQL SERVER 2000 installed on 2 different servers (2 separatedmachines).I am triing to connect them så that when one row is added to the table inthe database in main server - then the same row is added to the same tablein the second server database.I made the insert trigger on the table in the first server ( the secondserver is added as a linked server):-----------------------------------------------------------------------------------------create trigger ti_myTabe1 on myTable1 for insert asbegindeclare ........BEGINinsert into server2.myDatabase2.owner.myTable2(column1, column2, column3)SELECT column1, column2, column3FROM inserted insEND......end-----------------------------------------------------------------------------------------When I run the statement in "SQL Query Analyzer"on the first server:insert into Table1 values(va1,val2,val3)then error is coming:Server: Msg 7391, Level 16, State 1, Procedure ti_myTabe1 , Line 19The operation could not be performed because the OLE DB provider 'SQLOLEDB'was unable to begin a distributed transaction.[OLE/DB provider returned message: New transaction cannot enlist in thespecified transaction coordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].The straing thing is: if I run the statement in "SQL Query Analyzer"on thefirst server:insert into server2.myDatabase2.owner.myTable2 values(va1,val2,val3)then it works!But not inside the trigger!!! - What I am doing wrong ?Any idea is greatly appeciated.

View 2 Replies View Related

SQL 2000 Linked Server Hangs Due To Trigger

Jul 23, 2005

Hi -We have two SQL 2000 Servers. We have the linked server setup and wecan perform updates and inserts between the databases. But when we adda trigger and insert something into a table, the database hangs. Thereare NO processes blocking or being block in either database. This ONLYoccurs when we have one OS as Windows 2000 Server and the other OS asWindows 2003 Server. This problem does not occur when both servers areWindows 2000. Has anyone ran into anything similar to this???*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 2 Replies View Related

Trigger Executing Linked Server Stored Procedure

Jul 3, 2006

What is the syntax for creating a update trigger and passing the values which were updated to a stored procedure on a linked server?? Specifically need syntax for updated value, as well as the syntax for executing the stored proc on the linked server.

Thank you

View 1 Replies View Related

Error :Execute Trigger From Remote Server To Another Server By Linked Server

Jul 22, 2007

i did "Linked server" between To Servers , and it's Working.

---------------------------



For Example :

Server 1 =S1.

Server = S2.

i create table in S1 : name = TblS1

i create same table in S2 : name TblS2



and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2

/****************** trigger Code ***************

CREATE TRIGGER dbo.tr_cpD

ON dbo.TblS1

AFTER INSERT

AS


BEGIN





SET NOCOUNT ON;


insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND

**************************************************



result is :

Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14

The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.

Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14

Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.





how i can execute this trigger



View 5 Replies View Related

Linked Server Update

Sep 4, 2003

Updating the sp's fixed the error I was getting but the update takes forever on the linked server. Any way to speed things up?

I just reference the server.db.dbo.table in the update statement.

TIA

View 1 Replies View Related

Linked Server Update

Feb 6, 2002

I know how to do a select statement using linked servers but I need to update a table in Oracle using SQL Server.

For example:
SELECT * FROM OPENQUERY(Oracle, 'SELECT * FROM TEST')

I now need to update TEST using a table in SQL Server. Can someone help?

View 1 Replies View Related

How Can I Update Linked Server (AS400 DB)?

May 16, 2000

Hi!

Please

I got the following Error Message when trying to update a AS400 Database
"(Table Name) on (Data Source) not valid for operation"

My question is? Does Sql Server require journaling the files? How Should I change this option?. Please Help!

I did try to fix the above error, but then I got a new message:

OLE DB provider 'MSDASQL' supplied inconsistent metadata. The object '(user generated expression)' was missing expected column 'Bmk1000'.
Could you help me?

I will appreciate your help.
Thanks in advance

Ivette V

View 3 Replies View Related

Linked Server Update Error

Jan 20, 2004

Does Anyone know what this means?

I run the query in the attached file on multiple servers with success but some of them refuse to cooperate. I've tried recreating the linked server on the problem servers but this doesn't help. All I want to do is check db file size and free space and get it to work. Why does it have to be so damn complicated?

Any ideas welcome - including an entirely different way of doing this.

The script and table definitions in question are attached

Could not open table '"Helpdesk_New"."dbo"."LogStats"' from OLE DB provider 'SQLOLEDB'. The provider could not support a row lookup position. The provider indicates that conflicts occurred with other properties or requirements.
[OLE/DB provider returned message: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IOpenRowset::OpenRowset returned 0x80040e21: [PROPID=DBPROP_BOOKMARKS VALUE=True STATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_COMMANDTIMEOUT VALUE=600 STATUS=DBPROPSTATUS_OK], [PROPID=Unknown PropertyID VALUE=True STATUS=DBPROPSTATUS_OK], [PROPID=DBPROP_IRowsetLocate VALUE=True STATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_IRowsetChange VA...

View 1 Replies View Related

Linked Server Update Problem

Mar 15, 2004

I am getting an error trying to update a table in DB2 via SQL Server using a Linked Server. I can query the table using OPENQUERY but not via four-part name.

I can do this...

SELECT

Select * from OpenQuery(db2link, 'Select frst_nm from yccfssc9.person where id_prsn = 2')

When I try to Query using four-part names I get the following error...

7399 OLE DB Provider 'MSDASQL' reported an error. The provider does not support the necessary method.

UPDATE

When I try to update using this...

Update OpenQuery(db2link, 'Select frst_nm from yccfssc9.person where id_prsn=2') Set frst_nm = 'Fred'

I get the following error...

The OLE DB provider 'MSDASQL' indicates that the object has no columns.

When I try to update using four part names I get the error that says that the provider does not support the necessary method.

OTHER INFO

I was originially using version 6.1 of the db2 client (db2odbc.dll) but tried the 7.1 client and got the same error.

I believe we are using version 6.1 of db2 connect.

The mainframe db2 is version 7.0 release 1.0

Any help would be greatly appreciated. I referenced Microsoft Knowledge Base Article #270119 to get the workarounds that I attempted...

Gary

View 2 Replies View Related

Dynamic Update Linked Server

Nov 28, 2014

How to write this query so that I can pass a variable (from a cursor) for the were ORDER_ID =.

UPDATE OPENQUERY ([DISPATCHER_LIVE], 'select * from DCSDBA.ORDER_HEADER where ORDER_ID = ''405119-RM18''')
SET CONSIGNMENT = 'UNROUTED'

View 2 Replies View Related

Update Sql Errors Using Linked Server

Jul 23, 2005

Hi,I'm using sql server 2000 sp4.I've 2 databases linked, an instance and my local.I'm getting two different errors when trying to update the remote table(local server) from the instance.There is only one row of data in the table with an identity field.1st sql:-UPDATE [local].[database].dbo.NUMBERS SET [f 1]=3This gives me the error:-Server: Msg 8180, Level 16, State 1, Line 1Statement(s) could not be prepared.Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near '1'.If I was to remove the space from [f 1] and use [f1] it would workfine."select [f 1] from [dev001].[fashion Master].dbo.numbers"will return the correct valueAny Ideas ?2nd sql:-UPDATE [local].[database].dbo.NUMBERS SET [field1]=isnull([field1],0)+1This gives me the error:-Server: Msg 7306, Level 16, State 2, Line 1Could not open table '"fashion Master"."dbo"."NUMBERS"' from OLE DBprovider 'SQLOLEDB'. The provider could not support a row lookupposition. The provider indicates that conflicts occurred with otherproperties or requirements.[OLE/DB provider returned message: Multiple-step OLE DB operationgenerated errors. Check each OLE DB status value, if available. No workwas done.]OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IOpenRowset::OpenRowsetreturned 0x80040e21: [PROPID=DBPROP_BOOKMARKS VALUE=TrueSTATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_COMMANDTIMEOUTVALUE=600 STATUS=DBPROPSTATUS_OK], [PROPID=Unknown PropertyIDVALUE=True STATUS=DBPROPSTATUS_OK], [PROPID=DBPROP_IRowsetLocateVALUE=True STATUS=DBPROPSTATUS_CONFLICTING],[PROPID=DBPROP_IRowsetChange VA...If I was to remove the isnull part, then it will work okAny ideas

View 3 Replies View Related

Slow Update With A Linked Server

May 11, 2007

I have a linked server set up on my local SQL 2000 instance. I try and run an update against an SQL 2005 database and it take 29 seconds. I checked the execution plan and it says it takes the entire time on the Remote Scan. Is there something I need to do to speed this up? There is an index on the PK that I am searching against.

View 2 Replies View Related

Linked Server Update Statement

Jan 11, 2008



I've got the output from a cursor that generates the following sql statement.


Update SERVERNAME.DATABASENAME.dbo.TABLENAME set [update] = 'Y', status = NULL, completed = NULL where trigger_id = 10255

The statement generates the following error if the statement is run remotely

Msg 8180, Level 16, State 1, Line 1

Statement(s) could not be prepared.

Msg 156, Level 15, State 1, Line 1

Incorrect syntax near the keyword 'update'.


But the statement executes without error as formatted if run directly on the linked server.

Both servers are running 2000 sp 3a. The servers will be converted to 2005/2008 without patching to sp4.

View 5 Replies View Related

Update In Sybase 11 Linked Server Problem

Jul 27, 2005

When trying to update records in a Sybase 11 ODBC linked server got this error:

View 5 Replies View Related

Linked Server Update Table Error

Jul 31, 2015

We have 2 instances. One is sqlgpscluster and another is [sqlcdsclustersqlcds]. We have created linked server between sqlgpscluster and [sqlcdsclustersqlcds]. We run the below query on sqlgpscluster instance

UPDATE [sqlcdsclustersqlcds].CDSBusiness.dbo.tblInsertNowAppMonitoring
SET NoCabsDateTime = GETDATE(),City=@City
,Area = dbo.fn_FindAreaSubAreaBasedOnLatLong(@PickUpLat,@PickUpLng)
WHERE CustomerMobileNo=@CustomerMobileNo

We are seeing the below error:
The OLE DB provider "SQLNCLI" for linked server "sqlcdsclustersqlcds" could not UPDATE table "[sqlcdsclustersqlcds].[CDSBusiness].[dbo][tblInsertNow AppMonitoring]". The rowset was using optimistic concurrency and the value of a column has been changed after the containing row was last fetched or resynchronized.

View 16 Replies View Related

Update Trigger SQL Server 2000

Sep 18, 2001

Hi Iam trying to do a trigger that everytime I Update a record de date get update too I finally find a trigger close to that, but this trigger update all the dates from all the record of the same table I wonder is there are a way that I can do it by the date of the record, if somebody could help I will really appreciate.

Thi is the trigger that I have so far

Create Trigger Update_Date
on DBO.Company After Update as
Update dbo.Company
Set ActualiizationDate=Getdate()
go

View 1 Replies View Related

Problem In Update Trigger In SQL Server 7.0 - Need Some Help!

Jul 23, 2005

Hi for all on this...I'm using MS SQL Server 7.0 SP4 in some customers to store some datafrom an aplication developed by me.I created an trigger to run on update.When I run an update command on it's table and the where conditionreturns only one row, the trigger is executed ok, but if wherecondition returns more than one rows, the trigger don't run.I don't know what happens there...If any can help on this, I will be thankfull!Regards!Lucio

View 7 Replies View Related

Help With Update Trigger SQL Server 2000

Nov 28, 2007

Hi all,

I have a trigger for column eISBNEnteredDate on update or insert changes of eISBN of the table Products2 ( both belong to the same table). The column eISBNEnteredDate can either be added manually along with eISBN value or when only eISBN value is entered it is updated with present date.

The problem I am facing is when I send eISBN along with eISBNEnteredDate the present date is what is getting saved. Upon the same record when a new date is updated the new date is getting saved. Can someone tell me where I am going wrong?

Here is my trigger:




Code Block
ALTER TRIGGER [dbo].[Products2_eISBNEnteredDate] ON [dbo].[Products2]
For Insert, Update
As
Begin
Declare @ProductId int
Declare @eISBN Varchar(17)
Set @eISBN = '0'
If ( Update(eISBN) )
Begin
Select @Productid = I.Productid,@eISBN = I.eISBN
From Inserted I Left Join Deleted d on I.Productid = D.Productid
Left join Products2 P on P.Productid = I.Productid
Where (ISNULL(I.eISBN,'') <> ISNULL(D.eISBN,''))

If (IsNull(@eISBN,'') <> '' and IsNull(@eISBN,'') <> '0')
Begin
Update Products2
Set eISBNEnteredDate = getdate()
Where ProductID in (select i.ProductID
From Inserted i
Left join Deleted d on d.ProductID = i.ProductID
Where (i.eISBN is not null or replace(i.eISBN,' ','') != '') --where the new eISBN is not null or blank
and (d.eISBN is null or replace(d.eISBN,' ','') = '') --where the old eISBN is null or blank
and isnull(i.eISBN,'') != isnull(d.eISBN,'') --where the new eISBN is not equal to the old ISBN13
and d.eISBNEnteredDate is null)
End
If IsNull(@eISBN,'') = '' and IsNull(@eISBN,'') = ''
Begin
Update Products2
set eISBNEnteredDate = NULL
Where ProductID = @Productid
End
End
End

View 5 Replies View Related

Trouble With Update Trigger Modifying Table Which Fired Trigger

Jul 20, 2005

Are there any limitations or gotchas to updating the same table whichfired a trigger from within the trigger?Some example code below. Hmmm.... This example seems to be workingfine so it must be something with my specific schema/code. We'reworking on running a SQL trace but if anybody has any input, fireaway.Thanks!create table x(Id int,Account varchar(25),Info int)GOinsert into x values ( 1, 'Smith', 15);insert into x values ( 2, 'SmithX', 25);/* Update trigger tu_x for table x */create trigger tu_xon xfor updateasbegindeclare @TriggerRowCount intset @TriggerRowCount = @@ROWCOUNTif ( @TriggerRowCount = 0 )returnif ( @TriggerRowCount > 1 )beginraiserror( 'tu_x: @@ROWCOUNT[%d] Trigger does not handle @@ROWCOUNT[color=blue]> 1 !', 17, 127, @TriggerRowCount) with seterror, nowait[/color]returnendupdate xsetAccount = left( i.Account, 24) + 'X',Info = i.Infofrom deleted, inserted iwhere x.Account = left( deleted.Account, 24) + 'X'endupdate x set Account = 'Blair', Info = 999 where Account = 'Smith'

View 1 Replies View Related

Remote Update Having A Linked Server Takes Forever To Execute

Oct 17, 2006

UPDATE CD SET col1=SR.col1,col2=SR.col2,col3=SR.col3,col4=SR.col4,col5=SR.col5,col6=SR.col6,col7=SR.col7,

col8=SR.col8,col9=SR.col9,col10=SR.col10

FROM LNKSQL1.db1.DBO.Table1 CD

join Table2 USRI on USRI.col00 = CD.col00

join table3 SR on USRI.col00 = SR.col00

Here, I'm trying to tun this from an instance and do a remote update. col00 is a primary key and there is a clustered index that exists on this column. When I run this query, it does a 'select * from tabl1' on the remote server and that table has about 60 million rows. I don't understand why it would do a select *... Also, we migrated to SQL 2005 a week or so back but before that everything was running smooth. I dont have the execution plan from before but this statement was fast. Right now, I can't run this statement at all. It takes about 37 secs to do one update. But if I did the update on a local server doing remote joins here, it would work fine. When I tried to show the execution plan, it took about 10 mins to show up an estimated plan and 99% of the time was spent on Remote scan. Please let me know what I can do to improve my situation. Thank you

View 4 Replies View Related

SQL Server 2012 :: UPDATE Trigger Failing

Jan 30, 2015

We have an UPDATE trigger that is failing. This seems like a basic task - we want to write a record to a separate tracking table when our main transaction table is updated for any reason. Our assumption is that we have a reference to the data from the "inserted" record that was just updated. The scenario here is that we are running a batch process which READS several thousand records in our transaction table each evening.

We then mark each individual record as processed on the transaction table and expect that the UPDATE trigger will successfully fire (it is not). The version of our trigger listed below shows our attempt to deal with the fact that TransactionID does NOT exist from "inserted." We also have a version of this trigger that deals with INSERTS - it works flawlessly.

ON [dbo].[FPS_Transaction]
AFTER UPDATE
AS declare @trxId uniqueidentifier;
BEGIN TRY
SET NOCOUNT ON

[code]...

View 6 Replies View Related

SQL Server Trigger That Fires Only On Update Of Certain Field?

Aug 14, 2006

Dear Experts,I'm an Oracle guy, who is being given more SQL Server assignmentslately.I've been looking for things on the web about this, but I can'tanything so far.In Oracle, I you can create a trigger on a table that -only- fires ifcertain fields are updated.create or replace trigger trg_some_triggerBEFORE insertOF some_field1, some_field2on tbl_some_tablefor each row....Is this also possible in SQL Server?What is the syntax please?Thanks a lot!

View 2 Replies View Related

SQL Server 2014 :: Synchronize Table On Remote Server Via Update Trigger Failing

Jul 21, 2015

We have a database on a 2005 box, which we need to keep in sync with one on a 2014 box (until we can turn off the one on 2005). The 2005 database is still being updated with changes that must be applied to the 2014 database, given the nature of the data (medical documents) we need to ensure updates are applied to the 2014 database in very near real time (these changes are - for example - statuses, not the documents themselves).

Cunning plan #1, ulgy - not at all a fan of triggers - but use an after update trigger to run a sp on the remote box via a linked server in this format, with a SQL Server login for the linked server with permissions to EXEC the remote proc.

CREATE TRIGGER [dbo].[SourceUpdate] ON [dbo].[SourceTable]
AFTER UPDATE
AS
SET XACT_ABORT ON;
SET NOCOUNT ON;
IF UPDATE(ColumnName)

[Code] ....

However, while the sp can be run against the linked server as a standalone query OK, when running it in a trigger it's throwing

OLE DB provider "SQLNCLI" for linked server "WIBBLE" returned message "The transaction manager has disabled its support for remote/network transactions.".

Msg 7391, Level 16, State 2, Procedure TheAfterUpdateTrigger, Line 19

The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "WIBBLE" was unable to begin a distributed transaction.

Whether it actually possible to call a proc on a remote box via a trigger and if so what additional hoops need to be jumped through (like I said, it'll run OK called via SSMS)?

View 3 Replies View Related

Remote Scan On Linked Server - Fast SELECT/Slow UPDATE

Aug 14, 2001

In an ASP, I have a dynamically created SQL statement that amounts to "SELECT * FROM Server1.myDB.dbo.myTable WHERE Col1 = 1" (Col1 is the table's primary key). It returns the data immediately when executed.

However, when the same record is updated with "UPDATE Server1.myDB.dbo.myTable SET Comments = 'blah blah blah' WHERE Col1 = 1", the page times out before the query can complete.

I watched the program in Profiler, and I saw on the update that sp_cursorfetch was being executed as an RPC once per each row in the table. In a table of 78000 records, the timeout occurs well before the last record is fetched, and the update bombs.

I can run the same statements in Query Analyzer from a linked server and have the same results. The execution plan shows that a Remote Query is occurring on the select that returns 1 row, and a Remote Scan is taking place on the update scanning 78000 rows (I guess this is where all the sp_cursorfetch calls are happening...?).

How can I prevent the Remote Scan? How can I prevent the execution of the RPC sp_cursorfetch for each row in the remote table?

Thank you!

View 2 Replies View Related

SQL Server 2012 :: Trigger For Update Action Without Primary Key

Jun 18, 2015

I am writing a trigger for getting values to auditlog table when the values gets updated. Below is the code of my trigger.

CREATE TRIGGER [dbo].[Update_Temp] ON [dbo].[Temptable1] FOR UPDATE
AS
DECLARE @bit INT ,
@field INT ,
@maxfield INT ,
@char INT ,
@fieldname VARCHAR(128) ,
@TableName VARCHAR(128) ,

[Code] ....

The code is working fine when the table has primary key associated. However due to some restrictions I will not be able to have a primary key for some tables. I want to implement the same trigger in those tables too. When there is primary key, that primary key needs to get inserted into the audit table and if there is no primary key, i want a specific column value to get inserted instead of the primary key value into the audit table.

For example, i have a student table in which there is a student id, name, dob. there is no primary key defined for the table. So when i update the name or dob, i need the student id to get inserted into the Pk column of the audit table.

I tried modifying the code by checking the @pkcols for Null and if its null to get the old value as the primary key however I was not able to do it .

View 1 Replies View Related

Trigger To Update One Record On Update Of All The Tables Of Database

Jan 3, 2005

hi!

I have a big problem. If anyone can help.

I want to retrieve the last update time of database. Whenever any update or delete or insert happend to my database i want to store and retrieve that time.

I know one way is that i have to make a table that will store the datetime field and system trigger / trigger that can update this field record whenever any update insert or deletion occur in database.

But i don't know exactly how to do the coding for this?

Is there any other way to do this?

can DBCC help to retrieve this info?

Please advise me how to do this.

Thanks in advance.

Vaibhav

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved