Trouble Connecting To SQL Server 2000 From Sql Server MngmntStudio
Jul 17, 2007
Hi, i am trying to get to my hosting companies database server. Its SQL Sever 2000, but i want to connect through SQL Server Management Studio 2005. The connection is unable to be established, although i have tried all sorts of settings for the connection. I called the hosting company and they told me to connect using the IP address of the name server for my domain. It failed and i called again to check back, and one of the guy told me that u cannot connect to an instance of sql servr 2000 from sql server 2005. Is this true? Please help.
Here is the information that I have... ( ps all information is not the actuall information )
1) URL abc.somehostingcompany.com IP: 211.11.111.1 PORT: 1433 ( NOTE: if I go to a cmd promt and type in ping abc.somehostingcompany.com I get a response )
2) dbname = mydatabase
3) userUid = sa pwd = sa
Inside SQL Server Configuration Manager --> SQL Server Network Configuration --> Protocols for SQLEXPRESS, I enabled TCP/IP and Shared Memory. Inside the properties of TCP / IP, I made sure under the "IP Address" tab that the
IP1: Active = yes
IP1: Enabled = yes
IP1: IP Address = abc.somehostingcompany.com
IP1: TCP Dynamic Ports = 0
IP1: TCP Port = < empty string >
I clicked "OK", and I stopped and started the SQL Server 2005 Services --> SQL Server (SQLEXPRESS). Then I started up SQL Server Brower.
Lastly I go to SQL Server Management Studio Express and try to connect to this remote server and database and I keep getting timeout issues and a message saying that the default settings for SQL Server Express do not allow remote connectioning by default.
Any ideas what I could be doing wrong? Should I use the port number instead of Dynamic Ports? Should I use the real IP address? Does the LOG ON AS under SQL Server (SQLEXPRESS) properties need to be updated?
Hi, I have SBS 2003 installed and have currently been working with Sharepoint. I upgraded to SQL Server 2005 using the methods described in the documentation provided on the SBS CD, which can be found here: http://go.microsoft.com/fwlink/?LinkId=60500
I followed the document step by step and the installation completed without any problems, however after installation when trying to access a website I created in Sharepoint prior to upgrading I ran into this error: "Unable to connect to database." That error led me to the following Microsoft support article: http://support.microsoft.com/kb/823287
I followed all three methods in that article to ensure that the server is running and that it is configured properly, but it didn't change a thing.
Looking in eventvwr I noticed the following:
Failure Audit: Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Followed by:
Error: #50070: Unable to connect to database
It sounds as if Network Service doens't have the appropriate permissions to access the SQL server, but I defined those permissions in the SQL Server 2005 upgrade following what the upgrade manual provided on the CD told me.
I have been fooling around with this issue for a long time now, does anyone have any ideas?
I am getting an error saying incorrect syntax near fIt works in SQL Server 2005, but I cannot get it to work in SQL Server 2000 The error appears to be in the section that I marked in Bold. CREATE PROCEDURE [dbo].[pe_getReport] -- Add the parameters for the stored procedure here @BranchID INT, @InvestorID INT, @Status INT, @QCAssigned INT, @LoanOfficer nvarChar(40), @FromCloseDate DateTime, @ToCloseDate DateTime, @OrderBy nvarChar(50)ASDECLARE @l_Sql NVarChar(4000), @l_OrderBy NVarChar(500), @l_OrderCol NVarChar(150), @l_CountSql NVarChar(4000), @l_Where NVarChar(4000), @l_SortDir nvarChar(4)BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; SET @l_Where = N' Where 1=1' IF (@BranchID IS NOT NULL) SET @l_Where = @l_Where + N' AND f.BranchID=' + CAST(@BranchID As NVarChar) IF (@Status IS NOT NULL) SET @l_Where = @l_Where + N' AND f.Status=' + CAST(@Status As NVarChar) IF (@InvestorID IS NOT NULL) SET @l_Where = @l_Where + N' AND f.InvestorID=' + CAST(@InvestorID As NVarChar) IF (@QCAssigned IS NOT NULL) SET @l_Where = @l_Where + N' AND f.QCAssigned=' + CAST(@QCAssigned As NVarChar) IF (@LoanOfficer IS NOT NULL) SET @l_Where = @l_Where + N' AND f.LoanOfficer LIKE ''' + @LoanOfficer + '%''' IF (@FromCloseDate IS NOT NULL) SET @l_Where = @l_Where + N' AND f.ClosingDate>=''' + CAST(@FromCloseDate AS NVarChar) + '''' IF (@ToCloseDate IS NOT NULL) SET @l_Where = @l_Where + N' AND f.ClosingDate<=''' + CAST(@ToCloseDate AS NVarChar) + '''' IF @OrderBy IS NULL SET @OrderBy = 'DateEntered DESC' SET @l_SortDir = SUBSTRING(@OrderBy, CHARINDEX(' ', @OrderBy) + 1, LEN(@OrderBy)) SET @l_OrderCol = SUBSTRING(@OrderBy, 1, NULLIF(CHARINDEX(' ', @OrderBy) - 1, -1)) IF @l_OrderCol = 'InvestorName' SET @l_OrderBy = 'i.InvestorName ' + @l_SortDir ELSE IF @l_OrderCol = 'BName' SET @l_OrderBy = 'b.BName ' + @l_SortDir ELSE IF @l_OrderCol = 'StatusDesc' SET @l_OrderBy = 's.StatusDesc ' + @l_SortDir ELSE IF @l_OrderCol = 'QCAssigned' SET @l_OrderBy = 'q.LoginName ' + @l_SortDir ELSE SET @l_OrderBy = 'f.' + @l_OrderCol + ' ' + @l_SortDir SET @l_CountSql = 'SELECT f.FundedID As FundedID FROM FundedInfo AS f LEFT OUTER JOIN Investors AS i ON f.InvestorID = i.InvestorID LEFT OUTER JOIN Branches AS b ON f.BranchID = b.BranchID LEFT OUTER JOIN Status AS s ON f.Status = s.StatusID LEFT OUTER JOIN QCLogins AS q f.QCAssigned = q.LoginID ' + @l_Where + ' ORDER BY ' + @l_OrderBy CREATE TABLE #RsltTable (ID int IDENTITY PRIMARY KEY, FundedID int) INSERT INTO #RsltTable(FundedID) EXECUTE (@l_CountSql)SELECT f.DateEntered As DateEntered, f.LastName As LastName, f.LoanNumber As LoanNumber, f.LoanOfficer As LoanOfficer, f.ClosingDate As ClosingDate, i.InvestorName As InvestorName, b.BName As BName, s.StatusDesc As StatusDesc, q.LoginName As LoginNameFROM FundedInfo AS f LEFT OUTER JOIN Investors AS i ON f.InvestorID = i.InvestorID LEFT OUTER JOIN Branches AS b ON f.BranchID = b.BranchID LEFT OUTER JOIN Status AS s ON f.Status = s.StatusID LEFT OUTER JOIN QCLogins As q ON f.QCAssigned = q.LoginID WHERE FundedID IN(SELECT FundedID FROM #rsltTable) ORDER BY CASE @OrderBy WHEN 'DateEntered ASC' THEN f.DateEntered END ASC, CASE @OrderBy WHEN 'DateEntered DESC' THEN f.DateEntered END DESC, CASE @OrderBy WHEN 'LastName ASC' THEN f.LastName END ASC, CASE @OrderBy WHEN 'LastName DESC' THEN f.LastName END DESC, CASE @OrderBy WHEN 'LoanNumber ASC' THEN f.LoanNumber END ASC, CASE @OrderBy WHEN 'LoanNumber DESC' THEN f.LoanNumber END DESC, CASE @OrderBy WHEN 'LoanOfficer ASC' THEN f.LoanOfficer END ASC, CASE @OrderBy WHEN 'LoanOfficer DESC' THEN f.LoanOfficer END DESC, CASE @OrderBy WHEN 'ClosingDate ASC' THEN f.ClosingDate END ASC, CASE @OrderBy WHEN 'ClosingDate DESC' THEN f.ClosingDate END DESC, CASE @OrderBy WHEN 'InvestorName ASC' THEN i.InvestorName END ASC, CASE @OrderBy WHEN 'InvestorName DESC' THEN i.InvestorName END DESC, CASE @OrderBy WHEN 'BName ASC' THEN b.BName END ASC, CASE @OrderBy WHEN 'BName DESC' THEN b.BName END DESC, CASE @OrderBy WHEN 'StatusDesc ASC' THEN s.StatusDesc END ASC, CASE @OrderBy WHEN 'StatusDesc DESC' THEN s.StatusDesc END DESC, CASE @OrderBy WHEN 'LoginName ASC' THEN q.LoginName END ASC, CASE @OrderBy WHEN 'LoginName DESC' THEN q.LoginName END DESCENDGO
When trying to install SP4, I do not receive any notification of the install i.e. click on setup and then nothing. Checked *.out log and receive the following:
2006-08-08 10:40:57 - ? [100] Microsoft SQLServerAgent version 8.00.194 (x86 unicode retail build) : Process ID 3616 2006-08-08 10:40:57 - ? [101] SQL Server 1LTZ0Q version 8.00.194 (0 connection limit) 2006-08-08 10:40:57 - ? [102] SQL Server ODBC driver version 3.81.9031 2006-08-08 10:40:57 - ? [103] NetLib being used by driver is DBMSSHRN.DLL; Local host server is (local) 2006-08-08 10:40:57 - ? [310] 2 processor(s) and 1016 MB RAM detected 2006-08-08 10:40:57 - ? [339] Local computer is 1LTZ0Q running Windows NT 5.0 (2195) Service Pack 4 2006-08-08 10:40:57 - ? [129] SQLSERVERAGENT starting under Windows NT service control 2006-08-08 10:40:57 - + [260] Unable to start mail session (reason: No mail profile defined) 2006-08-08 10:40:57 - + [396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
Novice - Where to set up the mail profile and CPU idle condition?
I have installed Server 2005 Express on a pc running Windows Server 2000 sp4 which I want to use as the server for a network of pcs. However, I am unable to login to SQL Express on this machine from Sql Server Management Studio Express. I am in mixed mode and trying to connect with Server Authentication. I get various error messages none of which seem to point to the problem.
Networked to this pc are several other machines running Xp Professional/Home sp2 and if I install SQL Express on one of these I can log in to SQL Express on that machine without any problem. I can also connect to it via the network from the Win Server 2k machine.
Does anyone know of any issues when installing Server 2005 Express on a pc running Windows Server 2000 sp4.
We have (after several weeks of testing in all kind of environments) send out a new version of our application to several of our customers. Within days problems where drippin in; After looking for the problem on various customer situations we found a problem which I think is rather disturbing and very odd. I'll describe the situation, on which we finally managed to recreate the problem, here.
In my problem I use the following configuration:
Windows 2003 (standard edition) AD network with 2 domain controllers, multiple Windows XP workstations, some without SQL instances, some with SQL 2000 instances, some with SQL 2005 instances and even one with SQL 7 running. All run a 32 bit OS.
Tools to reproduce:
ListSQLSvr application (found on SQLDev.net) to enumerate the instances.
Problem description: -------------------------------------------------- I am running the machine called DEV001, which has SQL 2000 (instancename DRUMIS) and SQL 7.0 (has no instancename so this is the root instance) installed.
In any 'normal' situation all the runnings SQL instances are visible on the network like this:
Notice that the browser service might be off on DEV002, you can still see the EXPRESS instance and a new root instance has appeared (though it doesn't exist!)??
After restarting the Browser service all is OK again.
When I turn on Hide Server in the SQL 2000 TCP/IP properties (or turn it on in the registry [HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerDRUMISMSSQLServerSuperSocketNetLibTcp] "TcpHideFlag"=dword:00000001) on the DEV002 computer something real scary is happening.. The list looks as follows:
When someone has entered a database (for example the backoffice database on INSADBACKOFFICEEXACT) the list looks as follows (for a short moment; 5 secs or so):
Notice now that ALL instances are gone and no extended information is available. In the Query Analyser and in the SQL Management Studio when browsing you'll see this as well! When someone is accessing a database instance it appears for a few seconds again.
Since our installation and applications rely on selecting a existing instance it will fail in the above situations (or at least not showing all available instances).
In my opinion this is a bug somewhere! Note that even when the SQL Services are stopped on DEV002 (leaving the Browser service running) it still seems to block out ALL instance on the ENTIRE network!
I don't mind that one INSTANCE or even the entire MACHINE is hidden from the network, but ALL instances on ALL machines??
And the SQL Browser issue also worries me a bit since it does not stop the possibily to browse the SQL instances; it removes the SQL2000 instances but adds a root instance which doesn't even exist! Also the extended info is stripped.
Can anyone help me solve this/advise?
Also mind that in any situation there might run a lot of computers with a lot of SQL instances and I cannot tell our customers to find which machine has the SQL TCP/IP properties set to Hide... It even seems that in some situations SBS 2003 does the hiding automatically on Install? And if so, when and why?
Regards,
Albert van Peppen Senior System Engineer Insad Grafisch b.v.
I installed sql server 2000 server on my machine and i need to connect to sql server 2005 server which is at other machine, Is it possible to connect 2000 to 2005 server and get the data
I want to use a Microsoft SQL Server 2000 stored procedure to pull email information from our Gordano mail server and append this data to our SQL database. Information desired: From, To, Subject, Body Preferably I don't want to use tools/resources outside the SQL procedure to gain access to the Gordano information. Do you know if this is possible? Can anyone offer any advice? Thanks
Hi there, I have 2 servers on our compny'ssql server does not exist or access denied lan, one with fixed ip and the other one with internal ip. I installed SQL server 2000 on the one with internal ip and I want to access it from the other server. when I want to register sql server instanse , I can see the name of that instance in the list but I can't register it. I keep reciving this error : sql server does not exist or access denied! Could any one told me what to do?
Hi I am running Visual Studio 2005 Visual Web Developer Standard Edition on a machine with SQL Server 2000. Could you please teach me how to modify the connection string below so that it connects to SQL Server 2000 with the database called "VisualWebDev". Thank you. Jim
Hi,I am total newbie to SQL Server. My new host tells me I can connect throughAccessXP or 2002. I have Access 2000. Can I not connect with that also?Thanks, JA
I am developing a system using VS 2003 with database SQL Server 2000. In web.config, I have added the following code in it <sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;Database=grandb;Trusted_Connection=yes" cookieless="false" timeout="60" />
Actually I don't know if the above code is correct. My database is stored in the SQL Server 2000 and named as grandb. Thank you.
Hi, My problem is somewhat like this that, i want to connect my all applications (developed in asp.net) to one database. In other words i want to make a centralised database that can be accessible from the application running at the different domains. When i did so by using the same username, password, database and server...i recieve an error that, "connection cannot be establised". If any body have the solution for this problem. then please do write the "connection string" for me that can be efficiantly used on the applications running on differnt domains. Thanks and Regards, Steve Dcosta
Hello All, I am just getting started on aspx, coming from an asp background. I created the following connectionString in my web.config file:<connectionStrings> <add name="OuWebDB" connectionString="server=OurServer;database=OurDatabase;uid=TheUser;pwd=ThePassword"providerName="System.Data.SqlClient" /> </connectionStrings>
when I run this aspx file, from a machine, I get the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Help!!
I've just installed SQL Server 2000 on my local machine. I'm using the following element in my web.config file for my connection string.
<add key="SqlNWind512" value="server=(local)141.705.84.745;database=Northwind; user id=sa;pwd=h3fe8eq7;packet size=512;" />
Unfortunately, I'm getting the following error on my aspx page:
SQL Server does not exist or access denied.
I had no problem writing a connection string to connect to the MSDE installed on my computer, but making a connection to the Northwind database on my newly installed SQL Server 2000 Developer edition has been elusive to me.
I'm sure my IP address is correct. The authentication mode for logging into the database via Enterprise Manager is setup to require a password for sa. Therefore, I assume it's required in the connection string???
Maybe not so coincidentally, while I have been able to open this database through the Server Explorer in VS.NET, I'm not able to access it via Enterprise Mananger (no response, it just hangs) or my aspx pages.
I'm dying here!!! Is my connection string wrong? Any insights would be greatly appreciated!
I've installed Sybase client 12.0 and have created the DSN (it is successful, connection is established) but when I run this ActiveX Script from DTS Package it give me error Data Source Name not found and no default driver specified
Dim RS Dim oConn
Set oConn = CreateObject("ADODB.Connection") msgbox "set oConn" Set RS = CreateObject("ADODB.Recordset") msgbox "RS" (I've tried both open statement in both it gives me same error) oConn.Open = "Driver={Sybase ASE ODBC Drivers};Srvr=Server1;Uid=sa;Pwd=password"
We have installed SQL Server 2000 in our new server running on Microsoft Windows Server 2003.
We tried to connect to the database in the Server where it is installed. We are able to connect when we give server name. We are unable to connect when we give IP Address of the server.
Hi Folks,I'm very new to SQL Server. I have a home network. My primary connectionto the internet is using "Gateway 1" a linksys router, of which, my serveris a LAN node on that router. I have another LAN node connecting to the WANnode of the "Gateway 2" a wireless USR router to use with my laptop. Usingthe wireless laptop, I am on a different subnet than the Server. I'd liketo make a connection to the server through Visual Studio.net but I can'tseem to do it. I'm using TCP/IP with a port different than the default port(let's call it port 2110, even though it's not). I do have port forwardingon Gateway1 and I've tried everything from just the server internal IPaddress, the external IP address, IP address with port designation, URL withport designation, nothing seems to work. Any ideas?Thanks!Rick
I have an Access 97 database that I connect to a SQL Server 2000through ODBC. I have to manually set up the ODBC connection on eachuser's machine if I want them to be able to use the application though.Is there a way to store the connection string within the Access DB soI don't have to touch the ODBC settings on each user's machine? Or isthere a different solution that I'm missing? There are way too manyfor me tosetup. Thanks in advance.
Please help to connect SQL server 2000 on different domain. Please correct if I m wrong.
System details as follows
Client Domain : DomainA System : System1 IP Address : 10.10.225.19 SQL server 2000 installed
SQL Server Domain : DomainB System : System2 IP Address : 10.108.22.19 SQl Server : System2inst2 ( My database is under inst2 instance) SQL login : TestUser1 Password : Users123
I have Opened firewall port to access 10.108.22.19 from 10.10.225.19
While connecting the SQL server €śSystem2inst2€? from the client machine enterprise manager with the SQL authentication, I am getting error Login failed for user €śTestUser1€?
And I have noticed in the SQL server log the login attempt shows under System2 default instance ( no instance). Actually I want to connect system2inst2.
I get the following error message in quotes. I have a web application written in ASP.NET 2.0 through which I am trying to connect to a remote SQL Server 2000. My operating system is Windows Vista . I looked at many different sites to find a solution for this but without any luck. I am sure someone would have seen this issue here and I expect them to shed some light. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server). The connection string is located in my web.config file which looks like <add name="AMSConn" connectionString="Data Source=xxxx;Initial Catalog=testdb;User ID=sa;Password=xxxx" providerName="System.Data.SqlClient" /> I want to get this issue resolved and I need you guys help. Please let me know if you need any more information. Thanks Bharat
I'm new to using VS2005 and this is my first project connecting to our MS SQL 2000. App worked fine on my dev PC, connection to the same MS SQL Server. Published the web site to the web server (same server running MS SQL Server) and getting the below error. Is this a permission setup problem on SQL Server or does it really think it's connecting with a MS SQL 2005 database? An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My environment is Windows Server2003, ASP.NET 2.0, SQL Server 2000 using SQL authentication (names of DB's, sql id's, passwords are identical on both servers) My web application successfully connects to my database the web app and the DB are both on the same server (10.144.25.9).This connection string works: <add name="DefaultDataTierConnectionA" connectionString="Data Source=10.144.25.9,1433; Network Library=DBMSSOCN; Initial Catalog=9D_SQL; User ID=******; Password=******" providerName="System.Data.SqlClient"/> PROBLEM: The problem occurs when the DB is mpved to the remote SQL Server (10.144.25.10). I use almost the identical connection string except for the IP address which is changed to the remote machine. The db name, user, password is same on remote machine as on the local, so everything should work but does'nt. This connection string fails: <add name="DefaultDataTierConnectionA" connectionString="Data Source=10.144.25.10,1433; Network Library=DBMSSOCN; Initial Catalog=9D_SQL; User ID=******; Password=******" providerName="System.Data.SqlClient"/> error (odd error in that I'm connecting to SQL 2000?) - An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) There is no DBA on this project, I'm not sure this is a SQL Server set up problem?
I'm experiencing a problem connecting to a SQL 2000 server through my ASP code. My connection string is as follows: <add name="TheConnectionString" connectionString="driver={Sql Server};provider=MSDASQL;server=10.0.1.42;database=dbname;uid=*********;pwd=*********" providerName="System.Data.Odbc" /> The problem doesn't occur when I run my ASP code from my workstation using VS.NET's builtin webserver. It makes the connections and executes the CRUD commands successfully. However, when I publish my site to the webserver (which resides on 10.0.1.16) it fails out with the following error: System.Data.Odbc.OdbcException: ERROR [08001] [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.ERROR [01000] [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). I've verified that the webserver can talk to the DB server by connecting to the remote DB server through SQL Enterprise Manager running locally on the webserver. If I try to do this with a DSN I get the same results. I get the same error from any other webserver on the internal network. The difference between my workstation and the internal network is that I'm using a VPN to connect to our internal network while the webservers are physically connected to it. Firewalling isn't the issue in this case because the webservers and DB server are on a trusted network. I've seen other ways of connecting to the DB server including using Named Pipes (which I would rather not do because I don't want to setup a named pipe on the production db server). I'm relatively new to ASP.NET 2.0, so the above connection string is an adaptation of some old ASP code. If anybody has any suggestions on a better way to construct this connection string, please let me know. I've been racking my brains trying to get this to work outside of the devel env.
I fully understand that to connect to a named instance of SQL Server you need to use the ServerNameSQLInstanceName. The problem I have is that I have a SQL Server in a different zone. I can connect to the Default instance by IP Address or the ServerName.zone.domain.org. (e.g. MySQLServer.zone1.mydomain.org).
However, the same thing does not work for the Named Instance. It seems to be named instance or nothing.
How can I connect to this named instance across network zones?:S
We are having all kinds of issues with named instances for SQL 2000.
I am trying to connect to a SQL Server 2000 named instance on a different subnet and get an error. I cannot connect with ODBC or our web app.
I am using the port number for the alias that I created in the SQL Client Utility. We can connect to default instances without a problem, but not the named instances.
The SQL Server is 2000 build 2040 (Service pack 4 with a hot fix.) The server is listening on port 1223. In the ODBC connection I click on the Network Config and create an alias with the named instance such as SQLVSNSQLNI and specify port 1223. I have also tried adding the port to the connection string in the ASP include file (SQLVSNSQLNI,1223). If I do the same thing with a default instance on the network, both the app and ODBC work fine. It is only when I use a named instance.
Very frustrated. Thanks for any help you can provide
I am having difficulty connecting to SQL Server 2000 on one of ourservers via a VB6 program on Vista. I can connect fine to a differentserver, but it gives me the following error with the server inquestion:"Unable to connect to database. Please check your internet connectionError# -2147467259[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist oraccess denied"Using the program, I am able to access the database just fine whilerunning on Windows XP, but when I run the program on Vista, it givesme that error message for that server. If I change the connectionstring to a different server address, it works fine on Vista. Whatdifferences in the servers might cause this?Here is my connection string:"driver={SQL Server};Server=ipaddress;Uid=userID;Pwd=pwd;databa se=db"
I am developing an application which needs JDBC connection to a Named Instance of SQL Server 2000 (other than default instance). I am facing problem in this regard as my code gives an exception "Time Out" or "Connection Failed". However it works fine with the default named instance...The main driver class is "com.microsoft.sqlserver.jdbc.SQLServerDriver"
It gives the exception that Unable to connect to named instance....
Please if any one have any knowledge in this regard....do let me know....I have read an article on MSDN according to which on MS SQL Server 2000 the named Instance other than default can be accessed only through named pipes.
if some body can tell me Connection string for JDBC driver which utilizes named pipes...the it will be very help full for me.........any help from MSDN Experts is really appreciated...
Hi, Here is the syntax of the connection string within the web.config file:<connectionStrings><clear /> <add name="MyConnectionString" connectionString="Data Source=000.000.000;Initial Catalog=Database Name;Persist Security Info=True;User ID=XXXXXX;Password=XXXXXX;" providerName="System.Data.SqlClient" /> </connectionStrings> The test page has a GridView in it which uses the connectionstring fron the web.config file. Error Message:
hi I m rishabh Can some1 hel me with the connection of SQl server 2000 and visual studio 2005 for the ASP.NET web application. the Express edition was instaled on my computer with the visual studio installation but later i hav uninstalled the express edition and have now installed the 2000 sql server, but could not able to connect .. can some1 please hel me out with this... thanking you rishabh
hello guys .. can some1 could help me the connection bw the Visual Studio 2005 and the SQL Express Edition which is there provided by the Setup only.... i am a bignner and i am doing it by my one with a reference of book called APRESS- Beginning ASP.NET 2 in c#. i hav reached to the data access part of the book , almost half completed but i got stuck here...
the pubs database was not inbuilt i have made it by right-click on the "DataConnection" in the "Server Explorer" and making the new database......named "pubs" the code i hav wrote in the "Default.aspx.cs" isstring connectionString="Data Source=localhost\SQLEXPRESS;Initial Catalog=pubs;";SqlConnection myConnection = new SqlConnection(connectionString);
on debuging the above code the error i m geting is : err reading the DataBase (print statement) Login failed for user ''. The user is not associated with a trusted SQL Server connection (error) .now the connection is :Closed (print statement)
I have a vb 6 program that has been running for several years against a 6.5 db. I convert the db to 2000, and now when I repoint the software to the 2000 db, I get "Invalid Authorization Specification" when I try to open the connection. The connection string is:Dim conn As ADODB.ConnectionSet conn = New ADODB.Connectionconn.Open "Provider=SQLOLEDB" & _ ";Data Source=" & sServer & _ ";Initial Catalog=" & sDB & _ ";User Id=" & goProcess.UserID & _ ";Password=" & goProcess.Password & ";"All of the variables are filled out correctly, when I go against a 6.5 it works, Sql Server 2000 doesn't.
