Truncate Temp Table Doesn't Work In Sp
Aug 2, 2000
hi,
I have a stored procedure to calculate the balance for a group of people. Inside the sp,
I created a temp table at the beginning of the procedure, then use it to calculate the opening
balance first, then I truncated the table in the middle, reuse it to calculate the closing balance.
The sp will take the from date and the through date to do the calculation. Somehow,
when I passed a different from date and the same through date to the sp, it returned a different
closing balance. It took me a while to figure out that the temp table I was using didn't get
truncated in the middle. I did a 'select count(*) ' directly after the truncate statement.
Sometimes it returned a non-zero number, and sometimes it returned 0.
We are using SQL 7.0 Service pack 1. Does anyone know the reason?
Heidi Zhang
hZhangcti@use.net
View 3 Replies
ADVERTISEMENT
Dec 30, 2004
With a database size of almost 2 GB, I run the 'truncate table eventlog command' which completes successfully, but the database size only decreases by about 10 MB so stays too large - indeed the number of rows in the eventlog table is minimal, but the otehr tables in this database don't show such an amount of tables large enough to cause the size issue either. What could be the reason and how can I reduce it (possibly truncating another table but then which one, how could I determine which is too large and needs truncating?).
View 3 Replies
View Related
Mar 28, 2000
Since I have to go across the network, I'm trying to use the UNC. However, this won't even work when I'm using the UNC to point to the server on which this is run. I'm trying to restore a single table on 6.5. What is the obvious piece that I'm missing?
This works.
LOAD TABLE address
FROM DISK = 'd:MSSQLackupDBBackup.DAT'
WITH source='address'
This doesn't.
LOAD TABLE address
FROM DISK = 'server1d$MSSQLackupDBBackup.DAT'
WITH source='address'
View 2 Replies
View Related
Mar 9, 2007
Hi,
I was trying to create a simple SP that return a single value as follows:CREATE PROCEDURE IsListingSaved@MemberID INT,@ListingID INTASIF EXISTS (SELECT [Member_ID] FROM [Member_Listing_Link] WHERE [Member_ID] = @MemberID AND [Listing_ID] = @ListingID) Return 1ELSE Return 0GOWhen I try it out in the Tableadapter's preview table, I get the correct result (1, where the entries exist). However, in the BLL, I tried to get the value as:Dim intResult as IntegerintResult = CType(Adapter.IsListingSaved(intMemberID, intListingID), Integer). However, this always returns 0 (when it should be returning 1). P.S. Curiously, breakpoints skipped the VS generated code for the adapter. What could be the problem? Thanks,Wild Thing
View 3 Replies
View Related
Feb 20, 2008
I have a stored procedure with the following:
CREATE TABLE #t1 (... ...);
WITH temp AS (....)
INSERT INTO #t1
SELECT .... FROM temp LEFT OUTER JOIN anothertable ON ...
This stored procedure works fine in Management Studio.
I then use this stored procedure in an ASP.NET page via a SQLDataSource object. The ASP.NET code compiles without error, but the result returned is empty (my bounded GridView object has zero rows). From Web Developer, if I try to Refresh Schema on the SQLDATASource object, I get an error: "Invalid object name '#t1'. The error is at the red #1 as I tried putting something else at that location to confirm it.
What does the error message mean and what have I done wrong?
Thanks.
View 5 Replies
View Related
Dec 29, 2007
I use SSME to do a full backup of both the database & transaction log, selected "Truncate ..." in the options for the log backup. The log doesn't truncate.
I have looked at the reasons logs don't truncate in Books Online & can not find any that apply. There are no open transactions & in sys.databases log_reuse_wait is 0.
Any help would be appreciated.
Don Seydel
View 1 Replies
View Related
Aug 8, 2000
I have been unsuccessful in getting the Backup Log with
No Truncate option to work.
Any tips, tricks, suggestions, etc., would be appreciated.
Thanks!!!
View 2 Replies
View Related
Nov 13, 2007
I've been having some trouble keeping my log file size under control due to some off-hours data loads. Currently, while updating some certain tables, the data base is still in "Full" mode, which of course makes the log file grow accordingly.
Today I figured out that, given the current scenario, in order to shrink the log file back down (after the table update), I have to (1) backup the log file, (2) shrink the log file, (3) backup the log file again, and (4) shrink the log file again. My question is: why do I have to do two iterations of backup / shrink? Why does it not work with one iteration? I just want to better understand the architecture and functionality.
Also, would there be a better way for keeping the log file size under control? If I switched the database to "Simple" mode to load the data, would that work any better?
If so, what might be the best methodology?
Thanks in advance for any responses.
Kent Rothrock
Highland Mapping, Inc.
View 4 Replies
View Related
Feb 25, 2008
Hello all, I have a very simple script which I use to truncate and reclaim space on all the transaction logs in a SQL Server 2005 database. However, I have some Sharepoint db names I can't change that have dashes ('-') in the names, e.g., SharePoint_AdminContent_dc27334f-fb2d-4453-9764-5d8b730fb9e1. The script won't back up those databases because it has a problem with the dashes in the names. Does anyone have any thoughts on how I could modify the script to get it to work? Here is the script:
ALTER PROCEDURE [dbo].[SP_GlobalTruncate_transaction_logs]
AS
Set quoted_identifier off
DECLARE @dataname varchar(300)
DECLARE @dataname_header varchar(75)
DECLARE datanames_cursor CURSOR FOR SELECT name FROM sysdatabases
WHERE name not in ('master', 'pubs', 'tempdb', 'model', 'northwind')
OPEN datanames_cursor
FETCH NEXT FROM datanames_cursor INTO @dataname
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status = -2)
BEGIN
FETCH NEXT FROM datanames_cursor INTO @dataname
CONTINUE
END
SELECT @dataname_header = 'Database ' + RTRIM(UPPER(@dataname))
PRINT ' '
PRINT @dataname_header
EXEC('BACKUP LOG ' + @dataname + ' WITH TRUNCATE_ONLY')
EXEC('DBCC SHRINKDATABASE (' + @dataname + ',TRUNCATEONLY)')
FETCH NEXT FROM datanames_cursor INTO @dataname
END
DEALLOCATE datanames_cursor
PRINT ''
PRINT ' '
PRINT 'Free space removed and transaction log truncated for each user database'
GO
And here is the error I get:
Database SHAREPOINT_ADMINCONTENT_DC27334F-FB2D-4453-9764-5D8B730FB9E1
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '-'.
Msg 319, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon.
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '-'.
Thanks so much for the help.
View 4 Replies
View Related
Sep 15, 2005
I'm pretty new to DTS, so forgive me if this is basic. I created a simple DTS package to run a query and export it to a text file. I can execute the package fine from my workstation through EM, but when I try to execute the job to run the package I get this error:
Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied.
I think that maybe SQL Agent doesn't have the right permissions to write to that network drive. What should the permissions be?
View 3 Replies
View Related
Nov 10, 2004
This is probably very simple, but I can't get passed this problem.
I have a report in MS Access that uses info generated by a query. One of the text fields in the query contains either the word 'Select' or the name of a course.
The report should display a space if the value is 'Select', or the actual value of the field in any other case. The field can never contain a null value.
I've used:
=IIf([optVoc1]="Select","",[optVoc1])
in the text box on the report, but this only returns #error regardless of the actual content of the field.
What am I doing wrong?
Regards,
BD
View 5 Replies
View Related
Aug 27, 2004
Hi all,
I create and schedule a SQL job to run every minute to update a table base on certain condition but it doesn't work. Job history says successful every time but the table doesn't get updated.
However if I move it to Query Analyzer and run it under dba, it will work. Thinking that it may have to do with the user the job run as, I then change run as user from self to dba. But still SQL job won't update my table.
Anything about user permission or security that I can check? Or it there any other possibility?
TIA
View 1 Replies
View Related
Apr 26, 2007
When I run the select its fine but I cannot delete..... i have done this many times and it has worked.... I cannot see the error what am i missing
select
eqnow.empnumber,
eqnow_names.empnumber,
eqnow_names.names
--delete
from
eqnow
inner join eqnow_names
on eqnow.empnumber = eqnow_names.empnumber
where
eqnow_names.names is null
i get this error
Server: Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'inner'.
View 3 Replies
View Related
Oct 21, 2007
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'user instances enabled' does not exist, or it may be an advanced option.
Valid configuration options are
View 1 Replies
View Related
Apr 19, 2008
Hi to all, I'm building (and learn) an application with VB Express. In "edit dataset with designer" I've build this sql query:
SELECT tbl_soggetto.[ID Soggetto], tbl_soggetto_tipo.Tipo, tbl_soggetto.[Cognome/Denominazione], tbl_soggetto.Nome, tbl_soggetto.Indirizzo, tbl_soggetto.CAP, tbl_soggetto.Città , tbl_soggetto.Provincia, tbl_soggetto.[Telefono 1], tbl_soggetto.[Telefono 2], tbl_soggetto.[Telefono 3], tbl_soggetto.[Telefono 4], tbl_soggetto.[eM@il 1], tbl_soggetto.[eM@il 2], tbl_soggetto.Note
FROM tbl_soggetto INNER JOIN tbl_soggetto_tipo ON tbl_soggetto.[ID Tipo] = tbl_soggetto_tipo.[ID Tipo]
WHERE (tbl_soggetto.[Cognome/Denominazione] LIKE '%' + @Testo + '%')
The LIKE doesn't work!
I call the query with Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome(Me.txt_trova.Text.Trim)
But with LIKE '%ABC%' work!
Me.griglia.DataSource = Me.TA_tbl_soggetto_ricerca.Search_Cognome()
Someone can help me? Thanks...
View 12 Replies
View Related
Dec 11, 2006
When I try to install the problem I get the following error.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The log tells me nothing useful. I can't start the thing manually because after clicking cancel on the error message, the installer proceeds to roll back the installation.
How do I fix this problem?
View 3 Replies
View Related
Apr 9, 2014
Below are my temp tables
--DROP TABLE #Base_Resource, #Resource, #Resource_Trans;
SELECT data.*
INTO #Base_Resource
FROM (
SELECT '11A','Samsung' UNION ALL
[Code] ....
I want to loop through the data from #Base_Resource and do the follwing logic.
1. get the Resourcekey from #Base_Resource and insert into #Resource table
2. Get the SCOPE_IDENTITY(),value and insert into to
#Resource_Trans table's column(StringId,value)
I am able to do this using while loop. Is there any way to avoid the while loop to make this work?
View 2 Replies
View Related
Jun 8, 2005
This is the autogenerated code from the SelectCommand of my DataAdapter, except the red text. This DataAdapter is used to fill a DataGrid. What I want to do, is to calculate the total memory (4 slots) / PC.This code makes the sum of all memory of all PC's together.I'm not sure if the group by clause is needed here ...Me.OleDbSelectCommand1.CommandText = "SELECT PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type AS Case_Type, Processor_T" & _"ype.Type AS Processor_Type, Processor_Snelheid.Snelheid AS Processor_Snelheid, " & _"(SELECT SUM(Memory) FROM Memory, PC, RAM WHERE RAM.PcID = PC.ID AND RAM.GrootteID = Memory.ID)" & _"AS Memory, OS.Naam AS OS, OS_SP.Nummer AS OS_SP, Gebru" & _"iker.Naam AS Gebruiker_Naam, Status.Status, PC.Tagged FROM (Status RIGHT OUTER J" & _"OIN ((((((((PC LEFT OUTER JOIN (RAM LEFT OUTER JOIN Geheugen ON RAM.GrootteID = " & _"Geheugen.ID) ON PC.ID = RAM.PcID) LEFT OUTER JOIN Case_Type ON PC.Case_TypeID = " & _"Case_Type.ID) LEFT OUTER JOIN OS_SP ON PC.OS_SpID = OS_SP.ID) LEFT OUTER JOIN Ge" & _"bruiker ON PC.GebruikersID = Gebruiker.ID) LEFT OUTER JOIN Processor_Snelheid ON" & _" PC.Processor_SnelheidID = Processor_Snelheid.ID) LEFT OUTER JOIN Processor_Type" & _" ON PC.Processor_TypeID = Processor_Type.ID) LEFT OUTER JOIN OS ON PC.OsID = OS." & _"ID) LEFT OUTER JOIN Switchbox_Details ON PC.ID = Switchbox_Details.PcID) ON Stat" & _"us.ID = PC.StatusID) GROUP BY PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type, " & _"Processor_Type.Type, Processor_Snelheid.Snelheid, OS.Naam, OS_" & _"SP.Nummer, Gebruiker.Naam, Status.Status, PC.Tagged"I would like to know how to calculate the total memory for each separate PC.Hope you can help me.
View 5 Replies
View Related
Sep 20, 2000
I had a SQL Server falure. I rebiuld Master and tried to attach my database
with sp_attach_db? but get an error
Location: pageref.cpp:3931
Expression: rowLog.RowCount () == 1 || pPage->IsEmpty ()
SPID: 10
Process ID: 119
Connection Broken
View 1 Replies
View Related
Mar 1, 2001
I try to copy a DB from one server to another. On the target server an older version of the DB has been deleted and I now try to attach the new version using "sp_attach_db DBname, Filelocation", but I always get an error "Device Activation error. The physical file name 'D:mssql7dataAgency_log.ldf' may be incorrect"
"Database 'Agency' cannot be Created"
To me it seems that the database is looking for the log files (now deleted).
I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create a new database and replace the mdf file, but nothing works.
View 3 Replies
View Related
Mar 31, 2003
Hi,
I wanted to create a new trigger, but Enterprise Manager tells me about an "Incorrect syntax near @UpdatedByID, line 28". I double-checked everything, but it still does not work :mad: .
Any hints :confused: ?
TIA,
-Gernot
Here is the statement (line 28 is marked with ***):
CREATE TRIGGER TransferToABII ON [dbo].[CALGeneral]
FOR INSERT
AS
BEGIN TRANSACTION
BEGIN
DECLARE @Event varchar(255),
@BBaseUID int,
@StartDate smalldatetime,
@EndDate smalldatetime,
@Details varchar(255),
@AddressID int,
@ProjectID int,
@UpdatedByID int,
@ActID int,
@EventID int
SELECT @Event = Event,
@BBaseUID = BBaseUID,
@StartDate = StartDate,
@EndDate = EndDate,
@Details = Details,
@AddressID = AddressID,
@UpdatedByID = UpdatedBy,
@ProjectID = ProjectID
FROM INSERTED
BEGIN
EXEC BrainBase.dbo.BB_NEW_CREATE_NoteTask_Ret *** (@UpdatedByID,
@AddressID,
@ProjectID,
@BBaseUID,
@StartDate,
GetDate(),
@Event,
NULL,
NULL,
NULL,
NULL,
@Details text,
@ActID = @ActID OUTPUT,
@EventID = @EventID OUTPUT)
END
BEGIN
UPDATE CALGeneral SET ActID = @ActID WHERE ID = INSERTED.ID
END
END
IF @@ERROR <> 0
BEGIN
RAISERROR('Error occured',16,1)
ROLLBACK TRANSACTION
END
COMMIT TRANSACTION
View 4 Replies
View Related
Nov 11, 1999
I'm working with mssql 6.5
I have an primary key column with Identity property.
And at the moment server doesn't insert the proper value to this column.
Error message is following
Msg 2601, Level 14, State 3
Attempt to insert duplicate key row in object 'Spot' with unique index 'XPKSpot'
Command has been aborted.
The datatype of this column is int, and number of rows ~17000.
If I execute select @@identity it returns null.
View 4 Replies
View Related
Aug 2, 2004
I'm combining first name, last name, middle name, and an ID number together into an alias. Then I need to match that alias with a variable passed to the page (its a search results page). The problem is it claims that there is no table with the name of my alias. Anyone know what I'm doing wrong?
A mockup of the SQL looks like this:
SELECT UserID, Last_Name + ', ' + First_Name + ' ' + Middle_Name + '.' AS name
FROM Table
WHERE name LIKE 'variable%'
Everything looks right with the results, if I take out the WHERE clause it has name displayed properly and joined together with the rest of the data in the results properly.
Thanks in advance for any help that can be provided!
View 3 Replies
View Related
Oct 12, 2007
I have a query that doesn't work when i use 4 name convention instead of a openquery. The msg is below. Anyone know what is going on?
Both queries are the same but one doesn't work.
-- works
SELECT TOP 1 * FROM OPENQUERY(AS400_PROD, 'SELECT * FROM PPTREASUSA.ORDDET')
-- doesnt work
SELECT TOP 1 * FROM AS400_PROD.S1030Y3M.PPTREASUSA.ORDDET
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: Unspecified error]
[OLE/DB provider returned message: [IBM][iSeries Access ODBC Driver][DB2 UDB]CPF5715 - File ORDDET01 in library QTEMP not found.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBSchemaRowset::GetRowset returned 0x80004005: ].
http://www.sqlserverstudy.com
View 2 Replies
View Related
Jan 17, 2008
hi all,
i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Exams',
@recipients = 'me@domain.com',
@Body_format = 'HTML' ,
@subject = 'Room Preparation' ,
@body='hi there';
so can anyone help with this issue
thanks in advance
View 6 Replies
View Related
Feb 7, 2007
I have a drill through that passes four parameters. Three are passed from the current selections in that reports parameters and the fourth needs to be the customer name they click on in the body of the report so it's passed as Fields!fieldname.Value. When I click on the customer name, the drillthough fires but the report simply doesn't load. If I remove the parameter from the field clicked on and just pass the three parameters, it goes to the drill through correctly and that fourth parameter just sets to the default for that parameter in that report.
I can then simply check that parameter and select the value from the list that is exactly the same as the value I was attempting to pass it in the drill through and report refreshes correctly.
Whatever it is, is something in the manner that the value is passed in the drill through specifically.
Any ideas?
View 1 Replies
View Related
Mar 15, 2007
Hello,
I've rescued a MDF and LDF files off a client's old server, and I wanted to attach it to our own, but I can't seem to get the command to work, basically I have these two files, which I've dropped on our server:
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF
C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.LDF
So when I do a
SP_ATTACH_SINGLE_FILE_DB 'somedb','C:Program FilesMicrosoft SQL ServerMSSQLDataMYCLIENTNAME_Data.MDF'
It says the LDF path my be incorrect, and that there's two other files that are missing:
MYCLIENTNAME_LOG (no extension)
extra_log (no extension)
I thought the whole point of the command is that you only need a single file?
Its very hard to go back to the client's old server and try to find these two files, and it doesn't really matter if we loose a bit of data, so long as the bulk of it is available.
Update: I think I've found the answer...its not possible to do this, it really needs all the log files.
Any workarounds?
View 1 Replies
View Related
Jun 25, 2007
This works:
-- authenticator
CREATE FUNCTION [dbo].[cc2_Helper]( @SecretData VARBINARY(256), @cId INT )
RETURNS NVARCHAR(50)
WITH EXECUTE AS 'DBO'
AS
BEGIN
RETURN convert( NVARCHAR(50), decryptbykeyautocert( cert_id( 'cert_SecretTable_SecretData_Key' ), null, @SecretData, 1, convert(varbinary, @cId) ) )
END
go
CREATE VIEW [dbo].[cc2View2]
AS
SELECT CardID as CardID, [dbo].[cc2_Helper](CardNumber, CardID) as CardNumber FROM [dbo].[cc2]
go
GRANT SELECT ON [dbo].[cc2View2] TO [user_low_priv]
This doesn't:
-- auth2/view3
CREATE FUNCTION [dbo].[cc2_Helper2]( @SecretData VARBINARY(256), @vBin VARBINARY )
RETURNS NVARCHAR(50)
WITH EXECUTE AS 'DBO'
AS
BEGIN
RETURN convert( NVARCHAR(50), decryptbykeyautocert( cert_id( 'cert_SecretTable_SecretData_Key' ), null, @SecretData, 1, @vBin ) )
END
go
CREATE VIEW [dbo].[cc2View3]
AS
SELECT CardID as CardID, [dbo].[cc2_Helper2](CardNumber, convert(varbinary, CardID)) as CardNumber FROM [dbo].[cc2]
go
GRANT SELECT ON [dbo].[cc2View3] TO [user_low_priv]
WHY? Note that the conversion to VARBINARY was moved from the call to DecryptByKeyAutoCert to the call to cc2_Helper2. That is the only change...
But if I declare @vBin as VARBINARY(256) then it does work! Guess I'm a little confused on declaring vars...anyone can elucidate? Thanks.
View 1 Replies
View Related
Dec 25, 2005
In the Data Source Wizard the "insert,delete,update" advanced options are greyed out.
The table's PK is not an identity, but a uniqueidentifier.
View 2 Replies
View Related
Jan 16, 2006
I have been looking at this for over a day now. I cannot see why this procedure does not work, its so simple.
No matter what happens it always returns 0. If it locates a record, it doesnt update it, yet it still returns 0.
It should not be returning 0 if its not updating so I can't figure out why it does.
Why does this always return 0?
[pre]Create Procedure CreateNewCategory @title nvarchar(100), @description nvarchar(1000), @displayOrder intAS DECLARE @Result as int
IF EXISTS(SELECT categoryTitle FROM categories WHERE categoryTitle = @title) BEGIN SELECT @Result = 1 ENDELSE BEGIN INSERT INTO categories(categoryTitle, categoryDescription, displayOrder) VALUES(@title, @description, @displayOrder) /* If no error was encountered, 0 will be returned. */ SELECT @Result = @@Error ENDGO[/pre]
Thanks!
View 2 Replies
View Related
Sep 4, 1998
Hello, I upgraded to Beta 3 and now mail isn`t working(I hate mail!) I found 2 error messages. One when trying to add an operators email id and the other when I try to "test" mail under server properties.
- Unable to start a mail session on the server with this mail profile.
- no mail profile defined.
The account that I am using is used for all our SQL Servers and was working on this server on 6.5 before the upgrade. I have checked the new SQLServerAgent service and it`s using the correct account.
Any help would be appreciated.
And to all you that are off for a long Labor Day weekend...I`m jealous!
View 1 Replies
View Related
Sep 5, 2000
Hi All,
I just upgraded my servers from 6.5 to 7.0,
however, all the transfer jobs that was using xfragent.exe
does not work anymore. Any idea? Please help.
Thanks,
Richard
View 1 Replies
View Related
Jan 18, 2006
Hi all, I have a problem with this trigger. It seams to be very simple, but it doesn't work...
I created a trigger on a table and I would want that this one updates a field of a table on a diffrent DB (Intranet). When I test it normally (a real situation), it doesn't work, but when I do an explicit update ("UPDATE AccesCard SET LastMove = getDate();" by example) it works.
If anyone could help me, I would appreciate.
NB: Is there a special way, in a trigger, to update a table when the table to update is on another BD ?
Francois
This is the trigger:
------------------------------------------------------------
ALTER TRIGGER UStatus
ON AccesCard
AFTER UPDATE, INSERT
AS
DECLARE @noPerson int
SET NOCOUNT OFF
IF UPDATE(LastMove)
BEGIN
SELECT @noPerson = Person FROM INSERTED
UPDATE Intranet.dbo._Users SET Intranet.dbo._Users.status = 1 WHERE personNo = @noPerson;
END
SET NOCOUNT ON
View 5 Replies
View Related
