Truncation Error Message
Jul 31, 2007
Ok, this is starting to drive me nuts, I've been trying to get this to work for 2 days now. I have a .csv file that I'm reading and importing the data into my table. I defined Derived columns for the type and the lengths as well. I have one column that keeps kicking out this error: The column in the db has a length of 50, the column in my derived column is set to 50, now there are some strings in the colum from the csv file that contain more then 50 characters so I have this in my derived column section: to get the first 50 characters.
(DT_WSTR,50)NAME
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "NAME" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
so to some it up. My field (name) in my .csv file can contain 2 to 80 characters but I only want the first 50 and if the field contains greater then 50 characters I'm getting the error above.
Has anyone else run into something like this? If so how did you get it working?
View 25 Replies
ADVERTISEMENT
Jun 27, 2007
Hi,
I have a data file that has numeric data that looks like:
1.123456
And this column is defined as a DT_NUMERIC(18.6) in the flat file conn mgr.
As an experiment, I changed the destination column to a NUMERIC(18,0) - hoping that this would throw a truncation error at the flat file task level (where I have Truncation on all columns set to "fail component").
Not a peep. It loaded the data into the table, chopping off the 6 digits after the decimal point.
You would THINK that this would cause an error, but no. Why is this? The flat file task complains about all kinds of things, but this is such a gross error, you would think it would catch it!
Thanks
View 5 Replies
View Related
Dec 18, 2007
Using SQL 7 with an Access 2000 MDB front end with ODBC linked tables.Have a DateModified field which previously was smalldatetime. Changed overthe weekend to datetime. Field is updated with a trigger that sets value toGetDate().One record in the table now cannot be updated. In Access, get message:[microsoft][odbc sql server driver]fractional truncation (#0)[microsoft][odbc sql server driver]timeout expired (#0)In QA (using Update), no message; just hangs.Note that many records in the table have been modified since the change, andthere doesn't seem to be a problem. It just seems to be this one record(possible others that we haven't come across yet) that will not allowupdates.Any ideas how to resolve this?Thanks!Neil
View 4 Replies
View Related
Aug 30, 2007
Hello Everyone and thanks for your help in advance. I am working on importing a flat text file into SQL Server 2005 and am having problems. The flat file is a CSV text file with " being used as a text qualifier. Each line is broken by a CrLf combination. When I try importing this file into a SQL Server 2000 table using the same datatypes and sizes for each column, it works perfectly fine with the data importing as expected. However, in SQL Server 2005, again using the identical column datatypes and sizes, the import fails giving me warnings such as:
* Warning 0x802092a7: Data Flow Task: Truncation may occur due to inserting data from data flow column "Column 0" with a length of 50 to database column "MLS_ID" with a length of 10. (SQL Server Import and Export Wizard)
Virtually every columns gives this type of warning, yet I don't understand why since the columns are all variable in length (every message says a column length of 50) and all are delimited rather than fixed size. Then later in the import, errors occur something like:
* Error 0xc02020a1: Data Flow Task: Data conversion failed. The data conversion for column "Column 15" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". (SQL Server Import and Export Wizard) * Error 0xc020902a: Data Flow Task: The "output column "Column 15" (70)" failed because truncation occurred, and the truncation row disposition on "output column "Column 15" (70)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component. (SQL Server Import and Export Wizard)
I haven't got a clue as to why this is happening. For the record, on the flat file source screen, I have ensured that delimited has been selected rather than fixed width. Any help on this issue owuld be greatly appreciated. Thanks.
View 5 Replies
View Related
Jan 3, 2008
All,
I am having a strange problem that I have been looking at for a day now, and my head is straing to hurt as I have banged my head on the desk so many times. I have written an extensible set of classes that allow me to build SSIS packages dynamically via a web front end. I am finding this code is working OK, but I have this silly bug.
The code is trying to generate an SSIS package that does somethign very simple, and transfer data from a 10 coumn table with a mix of data types, move through another component that adds a couple of extra columns on basic on some variables, then map it onto a OLD DB destination. This code works fine, until I start using strings of various lengths.
When the package runs, it fails validation with errors saying that truncation may occur as I am trying to put a 100 character string, into a 50 character string. The error is logical as you wouldn';t want to do that, but this is not what I am doing. I am actually transfering data from a 50 character string into a 100 character string. When I try it with a table where the strings are the same length at both ends, or no strings are involved, everything works fine, and the data goes from the source to the destination.
I must be setting something slightly wrong which only triggers this problem when the sizes don't match, but the data flow direction is fine, and the data types match. I have included the code from the piece of code that 'writes' the output part of the package. If anyone has any idea what might be going wrong, I would be forever in their debt!
Code Block
private void ConfigureInputColumns(Package package, MainPipe pipe, IDTSOutput90 SourceColumnCollection)
{
_InstanceOfDestination.AcquireConnections(null);
_InstanceOfDestination.ReinitializeMetaData();
IDTSPath90 path = pipe.PathCollection.New();
path.AttachPathAndPropagateNotifications(SourceColumnCollection,_Destination.InputCollection[0]);
IDTSInput90 input = _Destination.InputCollection[0];
IDTSVirtualInput90 vInput = input.GetVirtualInput();
int iIndex = 0;
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the destination
// to add each available virtual input column as an input column.
_InstanceOfDestination.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);
}
IDTSExternalMetadataColumn90 exInputColumn;
foreach (IDTSInputColumn90 inColumn in _Destination.InputCollection[0].InputColumnCollection)
{
// create the MAP
// What we need to do here, is say what source column, goes to what destination column.
// we read by index, and we need to map the specifics, we could control just 3 of 20 columns
// to whatever column we wanted in the destination......
// We know the name of the inColumn - It is called inColumn.Name, we need to find the column
// we want to map with by finding its name.
if (inColumn.Name == "BatchID" || inColumn.Name == "ValidationStatus")
{
exInputColumn = _Destination.InputCollection[0].ExternalMetadataColumnCollection[inColumn.Name];
// map it
_InstanceOfDestination.MapInputColumn(_Destination.InputCollection[0].ID, inColumn.ID, exInputColumn.ID);
}
else if (Mapping.Map.ContainsKey(inColumn.Name))
{
exInputColumn = _Destination.InputCollection[0].ExternalMetadataColumnCollection[Mapping.Map[inColumn.Name]]; // inColumn.Name
// map it
_InstanceOfDestination.MapInputColumn(_Destination.InputCollection[0].ID, inColumn.ID, exInputColumn.ID);
}
}
_InstanceOfDestination.ReleaseConnections();
}
View 7 Replies
View Related
Feb 14, 2008
I am trying to write a SSIS package to move data from an access database table to a SQL db table.
I have a field which has data that too long for NVARCHAR(255), so, I end upin this error:
"A truncation error occurred on the specified object of the specified component"
Any work around?????
View 21 Replies
View Related
Feb 20, 2006
Hi,
I am getting real stressed out because while trying to import an excel file into a temporary table i get a truncation error...
The max lenght used in the origin column is about 800 characters. So how the hell can i get the column to load? Jesus... this should be easy task... :P
Anyone experiencing this kind of stuff?
Regards,
Luis Simões
View 1 Replies
View Related
Mar 7, 2006
i trying to
import a text file to a table
which has the following fields
transid int
transitem tinyint
value money
starttime datetime
info nvarchar(128)
On my text file,
i put column 0 as numeric
col 1 as four-byte unsigned integer [DT_UI4]
col 2 as currency [DT_CY]
col 3 as database timestamp [DT_DBTIMESTAMP]
col 4 as Unicode string [DT_WSTR]
then it give me
Warning 1 Validation warning. Data Flow Task: Destination - TransItem [25]: Truncation may occur due to inserting data from data flow column "Info" with a length of 128 to database column "Column 4" with a length of 50. Package3.dtsx 0 0
anyone can help?
View 3 Replies
View Related
Apr 3, 2007
I have an tab delimiter ed file that I'm trying to load into a database using SSIS. The the database have a column called Comments that can hold up to 1000 Unicode characters (nvarchar[1000])
I have appropriately defined the flat file connection and marked every field to the intended length, but every time I run it it will give me the following error:
Data conversion failed. The data conversion for column "COMMENTS" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.
All the columns have a match, this specific column is has no field longer than 1000, larger record has 528 characters in it and the fields are defined as Unicode string in the file connection.
I already ran out of ideas of what may be giving this error, anyone has an idea of what else to try?
View 3 Replies
View Related
Dec 19, 2007
An SSIS package has worked fine for a long time in 32-bit SQL Server. It now fails in 64-bit SQL Server. I run this same package in my dev environment against the same data and it works, but my dev environment is 32-bit
System.Data.SqlTypes.SqlTruncateException: Numeric arithmetic causes truncation.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Parse Into DataSet" (5196) returned error code 0x80131932. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Any suggestions?
View 8 Replies
View Related
Dec 21, 2006
I have a script source to deal with a source that has different "record types" (first 3 columns are the same then the remaining 2 to 30 columns are different based on the record type).
Script source was working fine... then one of the columns that I had set to String with length of 2 came in with a length of 3 (which is not per spec)... instead of failing - all the columns after the one that had the bad value were null and the script just stopped as soon as it hit that.. AND said it was success. Which means it imported the data incorrectly and since the script says it was a sucess you'd never know anything went wrong and it only imported 30 rows instead of 10k+
Any ideas on how to capture this error?
Code (shortened with .... but should be enough - sorry the forum butchers the code formatting - if someone has a tip for pasting code from VS let me know):
Imports System
Imports System.Data
Imports System.Math
Imports System.IO
Imports System.Convert
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Public Overrides Sub CreateNewOutputRows()
Dim oCurrentFile As File
Dim oStreamReader As StreamReader
Dim sCurrentLine As String
Dim aCurrentLine() As String
Try
oStreamReader = oCurrentFile.OpenText(Me.Variables.SourceName)
sCurrentLine = oStreamReader.ReadLine()
Do While sCurrentLine IsNot Nothing
aCurrentLine = sCurrentLine.Split(Chr(44))
Select Case aCurrentLine(2) ' This is the 3rd column.. "Record Type" which tells us what type of record it is and how many columns etc (Chr(44) is a comma)
Case "BF"
BFRecordsBuffer.AddRow()
BFRecordsBuffer.TimeStamp = aCurrentLine(0)
BFRecordsBuffer.EyeCatcher = aCurrentLine(1)
BFRecordsBuffer.RecordType = aCurrentLine(2)
BFRecordsBuffer.Sym = aCurrentLine(3)
....
BFRecordsBuffer.RecordCount = Convert.ToInt32(aCurrentLine(24))
...
If aCurrentLine.GetLength(0) >= 30 Then
BFRecordsBuffer.SeqNo = aCurrentLine(29)
End If
Case "QF"
QFRecordsBuffer.AddRow()
QFRecordsBuffer.Timestamp = aCurrentLine(0)
QFRecordsBuffer.EyeCatcher = aCurrentLine(1)
QFRecordsBuffer.RecordType = aCurrentLine(2)
...
....
End Select
sCurrentLine = oStreamReader.ReadLine()
Loop
BFRecordsBuffer.SetEndOfRowset()
QFRecordsBuffer.SetEndOfRowset()
....
Catch ex As Exception
Me.ComponentMetaData.FireError(1, "Script Component", ex.Message, "", 0, True)
Finally
oStreamReader.Close()
End Try
End Sub
End Class
View 6 Replies
View Related
Jan 30, 2006
Howdy y'all, what the hey am I doing wrong here?
I am trying to suck in a HUGE flat file that is tab-delimited and each row ends with a hex :0D:0A.
The first few lines of the file are:
00000000h: 31 30 30 30 32 09 32 30 30 33 2D 30 31 2D 32 39 ; 10002.2003-01-29
00000010h: 20 30 30 3A 30 30 3A 30 30 2E 30 30 30 09 32 30 ; 00:00:00.000.20
00000020h: 2E 33 39 30 30 09 31 39 2E 38 30 30 30 09 32 30 ; .3900.19.8000.20
00000030h: 2E 33 34 30 30 09 34 32 31 33 37 09 31 2E 30 30 ; .3400.42137.1.00
00000040h: 30 30 0D 0A 31 30 30 30 32 09 32 30 30 33 2D 30 ; 00..10002.2003-0
00000050h: 31 2D 33 30 20 30 30 3A 30 30 3A 30 30 2E 30 30 ; 1-30 00:00:00.00
00000060h: 30 09 32 30 2E 33 35 30 30 09 31 39 2E 38 30 30 ; 0.20.3500.19.800
00000070h: 30 09 31 39 2E 38 37 30 30 09 33 33 39 33 33 09 ; 0.19.8700.33933.
here is my table script:CREATE TABLE [dbo].[HSF_Staging_TEST] (
[OSID] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Date] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Time] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[High] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Low] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Price] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Volume] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Splits] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GOHere is my BULK INSERT statement:osql -S(local) -Uusername -Ppassword -Q "BULK INSERT Trades.dbo.HSF_Staging_Test FROM '\devserverinputfilesDataDataHSF.txt' WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '', TABLOCK)" -o".HSF_Staging_Test_LOG.txt" -e".HSF_Staging_Test_ERR.txt"yeah, dang near perfect code, eh? ;)
well...here is the error I get...Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 1, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 2, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 3, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 4, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 5, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 6, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 7, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 8, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 9, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 10, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 11, column 8
(Splits).
Msg 4865, Level 16, State 1, Server TRADES, Line 1
Could not bulk insert because the maximum number of errors (10) was
exceeded.
Msg 7399, Level 16, State 1, Server TRADES, Line 1
OLE DB provider 'STREAM' reported an error. The provider did not give
any information about the error.
OLE DB error trace [OLE/DB Provider 'STREAM' IRowset::GetNextRows
returned 0x80004005: The provider did not give any information about
the error.].
The statement has been terminated.Is the problem something about the :OD:0A at the end of each row, rather than just the :0A??? If so, how the heck do I specify that? I think based on my testing so far (also tried '
' as the rowtermination param, but then it gives me a truncation error for the first row only, leading me to think it cannot find the end of the row that way.
I am still looking through archives and on the web, but have not seen anything specific to my issue yet...and cannot believe that I am the first to BULK INSERT this kind of data.
Help is appreciated!
~Paul
View 1 Replies
View Related
Oct 10, 2006
I am trying to use an XML Source on xml data from an XML webservice, I am putting the document into a variable the trying to import the data from there with the XML Source, but I am getting an error telling me that truncation occured
The Error is "[XML Source [1]] Error: The "component "XML Source" (1)" failed because truncation occurred, and the truncation row disposition on "output column "linking" (1579)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component."
The linking column mensioned in the error is sometime quite a long string but there is nowhere in the XML Source editor to change the size.
HELP!
View 3 Replies
View Related
Jun 4, 2015
I'm unable to find a solution to this truncation error on google.This happens only on one field which has comments. The offending Excel row/column has text that was entered in two lines i.e they entered the data and pressed "enter" and wrote a new line in the same row.Im using an Excel file source in SSIS and an OLEDB Destination (SQL Server) but one column keeps erroring out and I have tried to do the following:
1) Change output column width in advanced editor (still errors)
2) Data conversion tool between the source and destination (still errors)
View 4 Replies
View Related
Jul 17, 2007
Hi,
I'm trying to export sql table as fixed length text file with format file but I got the following error message:
Error = [Microsoft][ODBC SQL Server Driver][SQL Server]
Warning: Server data (61 bytes) exceeds host-file field length (60 bytes) for field (4).
Use prefix length, termination string, or a larger host-file field size.
Truncation cannot occur for BCP output file
All fields in the SQL input table have char data type and I use the format file like this:
7.0
29
1 SQLCHAR 0 10 "" 1 SEQ
2 SQLCHAR 0 1 "" 2 NPARSED
3 SQLCHAR 0 115 "" 3 COMPANY
4 SQLCHAR 0 60 "" 4 ADDR1
....
27 SQLCHAR 0 1 "" 27 LACS
28 SQLCHAR 0 2 "" 28 DPV
29 SQLCHAR 0 2 "
" 29 ZIP4CODE
I've been researched about this error but I couldn't find the clear answer.
The strange thing is that all the records are char() fields, not varchar()
And I checked the max length record for the 4th column(ADDR1) and it was 60, not 61.
However I'm still getting the error.
The output file was exported but some of the records have short length.
Is this some kind of bcp bug?
I used SQL Server 2000 Standard w/ SP4
And the following is the command that I used:
declare @cmd varchar(2000)
SET @cmd = 'bcp "Input_table" out "D:AddressUpdateTmpxFixADDR.dat" -fD:AddressUpdateTmpxFixADDR.fmt -Usa -Psapass -SMyMachine''
print(@cmd)
EXEC master..xp_cmdshell @cmd
Please let me know if anyone solve the similar problem.
Thanks,
- Hyung -
View 3 Replies
View Related
Dec 4, 2006
hi
"Bulk insert data conversion error (truncation) for row 1, column 1 (id)."
when you get the error above or similar in sql server 2000 does it continue inserting the data by truncating it or does it stop beacause looking at the data that i have got it seems to continue inserting the data but just truncates the colunm. i have tried it several time its seeems to be consistent.
I have data that has white spaces after the actual data e.g. '00093 ' hence i am happy aslong as i can be sure that it does always continue as i will be loading alot of data using a similar process.
hence my question is that will it load all the data all the time and just truncate it to fit the column size?
View 7 Replies
View Related
Jul 31, 2006
I am having problems reading from and ODBC conncetion from Oracle RDB into SSIS. I am using a DataReader source which uses a ADO.NET odbc connection to an oracle RDB database. I am having that write to a flat file. When I read integers from the source, it works just fine. When I read character data (char(48) for example), it gives me trucation errors. Is the DataReader source capable of reading char data from an odbc connection?
Here is the errors I receive:
SSIS package "Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Destination [792]: The processing of file "D:Documents and SettingsAdministratorDesktop est.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC020902A at Data Flow Task, DataReader Source [575]: The "component "DataReader Source" (575)" failed because truncation occurred, and the truncation row disposition on "output column "REPORT_PART_NUMBER" (789)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02090F5 at Data Flow Task, DataReader Source [575]: The component "DataReader Source" (575) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "DataReader Source" (575) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Destination [792]: The processing of file "D:Documents and SettingsAdministratorDesktop est.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Flat File Destination" (792)" wrote 0 rows.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (6) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
Thanks,
Alex
View 11 Replies
View Related
Mar 29, 2007
Hi,
I have created a SSIS package programmatically using C#.
The package should do the following take data from source A, and place rows into destination B, if there are any error rows then redirect the rows to destination C. In my package I have the following components:
DTSAdapter.OLEDBSource.1 - Used as the Source
DTSAdapter.OLEDBDestination.1 - Used for the Destination Output - (let me call this normalOutput)
DTSAdapter.OLEDBDestination.1 - Used for the Destination Error Output - (let me call this errorOutput)
All my mappings appear to be correct, I build and save the package and receive a Successful validation and Success on Execution.
However, When I open the application using the Execute Package Utility I get the warning:
Warning:No rows will be sent to the error output(s). Configure error or truncation dispositions to redirect rows to the error output(s), or delete data flow transformations or destinations that are attached to the error output(s)
How do I get around this?
I have placed on the DTSAdapter.OLEDBDestination.1 (Used for the Destination Output), on the input collection I have placed:
normalOutput.InputCollection[0].ErrorRowDisposition = DTSRowDisposition.RD_RedirectRow;
normalOutput.InputCollection[0].TruncationRowDisposition = DTSRowDisposition.RD_RedirectRow;
normalOutput.OutputCollection[0].ExclusionGroup = 1;
on the DTSAdapter.OLEDBDestination.1 (Used for the Destination Error Output) I have placed:
errorOutput.OutputCollection[0].ExclusionGroup = 1;
However this does not work, I just get the wanring displayed above.
I have also tried to set the
OutputCollection[0].SynchronousInputID for both the error output and the normal output to the same values
so that:
normalOutput.OutputCollection[0].SynchronousInputID = normalOutput.InputCollection[0].ID
errorOutput.OutputCollection[0].SynchronousInputID = normalOutput.InputCollection[0].ID
However, the above scenario does not pass the package validation, in the Execute Package Utiltity, I get the wanring mentioned above and also the error:
Error: The input "OLE DB Destination Input" (16) has an invalid error or truncation row disposition.
So my question is what are the correct configuration settings to have in this scenario?
Thanks
View 15 Replies
View Related
Nov 17, 2015
I have am having some issues bulk inserting from a flat file (CSV) to the database. I have also tried this by using the import and export wizard and get the following error:
I dont understand what the issue. The table that i have created looks like this:
CREATE TABLE IderaPatchAnalyzer
(
IP_Adresse varchar(64) NOT NULL,
Release_ varchar(50) NOT NULL,
Level_ varchar(50)NOT NULL,
Edition_ varchar(50) NOT NULL,
[Code] .....
I have in the changed the outputcolumnwidth in Ip_Adresse to 64. The length of the cells are not near 50 however i want it to be sure that its not the case. When I try to do the same in my SSIS project, i also get an error. I do get a warning: Truncation may occur due to inserting data from data flow column """"KB Available""" with a length o..... in that column there are max 5 varchar:  "yes" and "no". The  """"KB Available""" is the column name in the flat file (CSV), I have made checkmark in Column names in the first data row.Â
I have used the following guide for my SSIS project:
View 4 Replies
View Related
Feb 18, 2004
Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
View 1 Replies
View Related
May 15, 2014
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
View 5 Replies
View Related
Jul 15, 2015
I need to export some data from sql server 2012 to a excel file(.xlsx). Truncation error happened when executing the exporting task, error happened in conversion from a column of type nvarchar(max) to a column of type LongText. Max length of the source column data is 4303, and documented length limit of LongText, which is a alias of type Memo, is 64,000. why this error happen?
Below is detailed error message:
- Executing (Error)
Messages
Error 0xc02020c5: Data Flow Task 1: Data conversion failed while converting column "extended_info" (59) to column "extended_info" (143). The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
Error 0xc020902a: Data Flow Task 1: The "Data Conversion 0 - 0.Outputs[Data Conversion Output].Columns[extended_info]" failed because truncation occurred, and the truncation row disposition on "Data Conversion 0 - 0.Outputs[Data Conversion
Output].Columns[extended_info]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[code]...
View 3 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
Feb 15, 2006
Hi All,
I'm having trouble importing a CSV file into SQL using SSIS. The trouble seems to stem from truncation and from quote encapsulated fields.
Firstly it's worth noting that some of the data within the quotes contains the separator. E.g.
12,"some text, and a comma",34
Thankfully SSIS seems to cope with that by specifying " as the Text Qualifier. My next problem was that the SSIS Import and Export Wizard gave an error: "failed because truncation occurred". But I fixed this by specifying the OutputColumnWidth for the NCHAR and NVARCHAR type columns to be the width from the table definition.
But now I have another problem with the length of fields. Consider the following where the center column is NCHAR (22)
101,"some text, and a comma",303
102,"some ""quoted text"" bye",303
The first row has the correct width (once the encapsulating quotes are stripped out), but the second row does not, because it seems that when I exported the table the export wizard escaped the quote characters within encapsulated strings using quote characters. So I am back to getting the "truncation occurred" error. How can I get around this within SSIS?
Cheers,
Tim.
View 1 Replies
View Related
May 22, 2007
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies
View Related
Nov 20, 2006
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
View 5 Replies
View Related
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
Oct 18, 2007
Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
View 4 Replies
View Related
Oct 10, 2007
where can i find it?
thanks
View 4 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
Aug 27, 2007
Hi,
I am very new to using SSIS.
Trying to import data from MS Access 2000.
I receive the error "
[OLE DB Destination [1907]] Warning: Truncation may occur due to inserting data from data flow column "GENDER" with a length of 255 to database column "GENDER" with a length of 2. " on the source flow.
I have done some googling and came up with this post: http://torontosql.dotnetnuke-portal.com/Default.aspx?tabid=32233 which I thought may help, but it does not.
The query against the access datasource features the column: iif([sex]=1, 'm', 'f'). I tried using left(..., 2) as well, but SSIS is determind to treat the field as 255 characters for some reason.
I don't even particualrly care that the field is 255 chars and the sources is only two, I just want the data in! I have other fields coming up with similar error.
Can someone please advise?
PS, what is th significance of the "External Columns" Vs "Output Columns" on the Input and Output Properties tab in Advanced Editor?
I am really struggling with SSIS, it is not as intuitive as DTS.
View 1 Replies
View Related
