Trying To Connect To Northwind Database, On SQL Compact Server 3.5, An Error Generated, 'The Event Log Is Full'
Dec 26, 2007View 1 Replies
ADVERTISEMENT
Can't Connect To SQL Server Northwind Database
Dec 14, 2006I am trying to connect to SQL 7.0 northwind database via visual studio2005. But I can't open the connection. I get an error saying remoteaccess is not allowed. But the remote access is ok. I can used the samelogin and connect to the sql server via enterprise manage.SqlConnection conn = new SqlConnection("DataSource=(sqlserver:1433);Initial Catalog=Northwind;UserID=me;Password=mypassword");The above is the string I am trying to use.Is there a way to do this in Visual studio thanks
View 1 Replies View RelatedNORTHWIND Database Was Re-created From A Different Database:How Can I Change The Entry In Sysdatabases For Database 'NORTHWIND'?
Jan 14, 2008Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
How To Connect ADODB With Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider For Microsoft SQL Server Compact 3.5)
Sep 12, 2007Hi
We are checking VB 9 (Orcas).
we connected to database created under with sql server 7. with this code
Public cn As New ADODB.Connection
Public Sub OpenDB()
cn.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial catalog=Reservation;Data Source=.")
End Sub
this code worked well.
we know sql7 is not compatiable with vista. please tell us how to connect it wiith sql2005 . we downloaded orcas express edition beta. we created a database also. please let u know how to connect with Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5).
Rgds
Pramod
How To Connect To Compact Edition Database
Dec 18, 2007I need to create a desktop program on vb.net , based SQL compact edition. but I do not know how to connect to CE database. I already create the sdf file, but I can not connect it from the poject , is there any way to do it ?
View 1 Replies View RelatedEvent 107 Report Server Windows Service (MSSQLSERVER) Cannot Connect To The Report Server Database.
Dec 5, 2007every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
Stored Proc Error By Northwind Database
Jan 14, 2008i try create this example:http://www.codeproject.com/KB/webforms/ReportViewer.aspxI have Northwind database added in the SQL server management and i select Northwind databse in drop box and I push Execute!ALTER PROCEDURE ShowProductByCategory(@CategoryName nvarchar(15)
)ASSELECT Categories.CategoryName, Products.ProductName,
Products.UnitPrice, Products.UnitsInStockFROM Categories INNER JOIN
Products ON Categories.CategoryID = Products.CategoryIDWHERE
CategoryName=@CategoryNameRETURNbut error is:Msg 208, Level 16, State 6, Procedure
ShowProductByCategory, Line 11Invalid object name
'ShowProductByCategory'.on web not so clear what is issue pls. help
Error While Connecting To SQL Server Compact 3.5 Database With SQL Server Management
Mar 11, 2008Hello,
i tried to connect to a SQL Server Compact Database (version 3.5) with SQL Server Management Studio Express (Version 9.00.3042.00).
But i get the follwing error message (sorry, it's a german message):
.....................................
Es kann keine Verbindung mit 'D:DocumentsVisual Studio 2008Projects\_ProduktivSuperkalibrator_PrototypenSuperkalibrator_PrototypenDatenbankDatabaseTest.sdf' hergestellt werden.
------------------------------
ZUSÄTZLICHE INFORMATIONEN:
Sie versuchen, auf eine ältere Version einer Datenbank von SQL Server Compact Edition zuzugreifen. Falls es sich um eine Datenbank von SQL Server CE 1.0 oder SQL Server CE 2.0 handelt, führen Sie 'upgrade.exe' aus. Falls es sich um eine Datenbank von SQL Server Compact Edition 3.0 oder höher handelt, führen Sie die Komprimierung und Reparatur aus. [ Db version = 3505053,Requested version = 3004180,File name = D:DocumentsVisual Studio 2008Projects\_ProduktivSuperkalibrator_PrototypenSuperkalibrator_PrototypenDatenbankDatabaseTest.sdf ] (SQL Server Compact Edition ADO.NET Data Provider)
.....................................
Is there a solution to manage Compact Databases in Version 3.5?
Thanks!
Stefan Wagner
SQL Server 2008 CTP Feb With Compact 3.5 - Can't Connect
Mar 3, 2008I need to be able to manage my Compact 3.5 database (script tables, edit columns etc).
As far as I understood, only way to do this is to install SQL Server 2008 CTP. So I did that, installed the February release. But when I try to connect to my Compact 3.5 database, I get this error:
Cannot connect to %path to my db%
Could not load file or assembly 'Microsoft.SqlServerCe.Client, Version 10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' ...'
Any ideas?
Or do anyone know an other way to handle Compact 3.5 databases?
SQL Server Compact Edition Cannot Connect To Big Databases
Sep 24, 2007In my IPAQ, I have been using SQL CE for databases with various sizes without any problem. I am creating the databases on my desktop using VS 2005. After I moved to VISTA, I have upgraded my VS 2005 to SP1 and SQL CE to 3.1. My databases which were created before worked without any problem. After I have created my databases via 3.1 on the desktop and moved them to Mobile, I had problems.
1. I specify Max database size parameter as the size of the database
2. If the size of the database is smaller than 16 then I specify 128
3. If the database is old version then program runs without any problems whatever the database size is
4. If the database is created with 3.1 and size is small (20MB, 60MB, etc) no problems arise
5. Ä°f the databse is created with 3.1 and size is large (133MB, 174MB) then dbconnection.Open() command runs indefinitely and program hangs up .
My IPAQ runs "Microsoft Pocket PC Version 4.20.1081" and desktop runs VISTA Home Premium. I have installed VS 2005 SP1.
Thanks for any help
Sqlceoledb35.dll - Error 25123 - A SQL Server Compact Edition DLL Could Not Be Loaded. Reinstall SQL Server Compact Edition.
May 5, 2008Hello,
we've got a SQL Server 2005 which replicates with an SQL Server Compact 3.5. Every 10 to 20 synchronisations we're getting the error mentioned above. A Soft reset of the device helps to make the synchronization working again.
Why is this error happening and how can we resolve this?
BTW, we've also running system that replicates with an SQL Server Compact 3.0 without having this problems.
Thanks,
Markus
Event ID: 17052 SqlDumpExceptionHandler: Process 57 Generated Fatal Exception C0000005 EXCEPTION_ACCESS_VIOLATION
Nov 15, 2007I'm running SQL 2000 SP4 on a patched Windows 2003 SP2 server.
I keep getting the error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 11/14/2007
Time: 3:51:13 AM
User: N/A
Computer: HOST20
Description:
Error: 0, Severity: 19, State: 0
SqlDumpExceptionHandler: Process 57 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
Any idea what this is or what to do to fix it?
Cannot Connect To A Named Instance Of SQL Server From Compact Framework 2.0
Mar 14, 2008I have two instances of SQL Server on the same PC:
Default instance: SQL Server 2000
Named instance with name €œMS2005€?: SQL Server 2005.
Also I have another SQL Server 2005 on another PC.
I created a .NET 2.0 Compact Framework application that connects to the database and executes simple query. This application can connect to any instance of the SQL Server when it is executed on the PC (not on the server). But the problem is that when I try to execute the application from the windows CE 5.0 device, the application can only connect to the default instance (SQL 2000 and 2005) and can not connect to the named instance (Name: MS2005).
Is it some kind of limitation of the SqlClient library for the compact framework?
Below are the code and connection strings:
string connectionString = €œServer=1.1.1.1;Database=DB1;Uid=sa;Pwd=€?
string connectionString = €œServer=1.1.1.1\MS2005;Database=DB1;Uid=sa;Pwd=€?
using (SqlConnection connection = new SqlConnection(connectionString))
{
connection.Open(); //This is the point where exception is generated
using (SqlCommand command = connection.CreateCommand())
{
command.CommandText = "select count(*) from users";
object result = command.ExecuteScalar();
Console.WriteLine("Result: [{0}]", result);
}
connection.Close();
}
Thank you for your time and advice.
Cannot Install Northwind Database In SQL Server Express
Apr 27, 2006Hi,
I tried to install the Northwind database into SQl Server Express via the instnwnd.sql script using the command line:
osql -E -i instnwnd.sql
after a time out though I get this message:
"[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL
Server [2].
[SQL Native Client]Login timeout expired
[SQL Native Client]An error has occurred while establishing a connection to
the server. When connecting to SQL Server 2005, this failure may be caused by
the fact that under the default settings SQL Server does not allow remote
connections."
I already granted access to the administrator account on my machine.
Anyone knows what I need to do more?
Thanks in advance
greetings from Belgium,
Anthony
Entity Framework: No Support For Server-generated Keys And Server-generated Values
May 23, 2008Hello
I tried the Beta 1 of the service pack 1 to .net 3.5. If I try to add an entity (and try to save this), I get the Exception "No support for server-generated keys and server-generated values".
How can I add entities to my Sqlce- database?
I tried to give the id- column (primary key) in the database an identity, another time without identity, only primary key --> none of them worked. I always get the same error.
What do I have to change to make successfully a SaveChanges()?
Thanks for your help,
Gerald
How To Connect To My Sql Server Express,also Pubs And Northwind For Sql Server Express
Feb 20, 20061, I have installed VWD express,sql server 2005 express.I also install management studio and adventureswork db.In the management studio I can able to connect and view adventurework db.But I can't manage to make a connection string to my db server when connecting to management studio server name is "KAMRANSHAHIDSQLEXPRESS".I wants a connection string with respect to this server.2,Is there new database for pubs and northwind for sql server 2005.Or they are of old sql server 2000.I have installed sample databases but can't find script for pubs and northwind nor it install automatically.I wan't to use tutorial's sample.
View 1 Replies View RelatedCompact Database Error Code: 0
Jan 9, 2006I am currently working in VB.NET with SQL Mobile 2005. I am trying to compact a database, .sdf, using the SqlCeEngine Object compact(connectionstring). When I use this code to compact a small database, only about 300KB, it returns okay however when I try to compact a larger database, about 9MB, it returns with a SQL Error Code: 0, "The operation completed successfully" however with no compacted database. The code works however it only seems to work for smaller databases. Does anyone have any ideas on how to correct this error or tell me why it returns with that type of error.
Snuggs
Repair Northwind Database In SQL Server Management Studio Express
May 7, 2007Hi all,
Long time ago, I downloaded the Northwind and pubs databases from the Microsoft website (I do not remember the details of it) and installed these two databases together into the SQL Server Management Studio Express of my PC (Microsoft Windows XP Pro). I tried to learn an example of using "User Instance" (source code was from a book) on the Northwind database located in my SQL Server Management Studio Express. I just find out that my Northwind database has the title only and no tables at all. If I click on the "+" in front of the "Northwind", I got the following error message:
Microsoft SQL Server Management Studio Express
Failed to retrieve data for this request.(Microsoft SqlServer.Express.SmoEnum)
Additional information:
One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from backup. (Microsoft SQL Server, Error: 5173)..
Please help and tell me how I can repair this Northwind database in my SQL Server Management Studio Express.
Scott Chang
P. S.
I deleted the name 'Northwind' in my SQL Server Management Studio Express, executed the "SQL2005DBScriptsInstnwind" program and I got the following error message: Msg 1802, Level 16, State 4, Line 1
CREATE DATABASE failed. Some file name listed could not be created. Checked related errors.
Msg 5170, Level 16, state 1, Line 1
Cannot create file 'c:Program FilesMicrosoft SQL ServerMSSQL.1DATAorthwindorthwind.ldf' because it already exist. Change the file path or the file name, and retry the operation.
Msg 15100, Level 16, State 1, Procedure sp_dboption, Line 64
The database 'Northwind' does not exist. Use sp_helpdb to show available database.
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'Northwind'. No entry found with that name. Make sure that name is entered correctly
Cannot Open Database Northwind Requested By The Login. The Login Failed............. ERROR
Aug 10, 2005Please, can anyone tell me why I am getting the undermentioned error message when I develop my application as an IIS Site in Visual Web Developer 2005 Express ? I have already developed and successfully tested it as a 'FileSystem Web Site' .I am using SQLSErver Express 2005 edition and have which I have installed along with the Northwind database as per the download instructions. My IIS software is version 5.1 which I have checked and it is configured to allow Integrated Windows Authentication. the relevant code is (1) web.config file connection strings
<connectionStrings>
<add name="NorthwindConnectionString"
connectionString="Data Source=.sqlexpress;Initial Catalog=Northwind;Integrated Security=True"
providerName="System.Data.SqlClient"/>
</connectionStrings>(2) the grid view control and sqldatasource
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="CategoryID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" InsertVisible="False"
ReadOnly="True" SortExpression="CategoryID" />
<asp:BoundField DataField="CategoryName" HeaderText="CategoryName" SortExpression="CategoryName" />
<asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>"
SelectCommand="SELECT [CategoryID], [CategoryName], [Description] FROM [Categories]">
</asp:SqlDataSource>This is the full error message and details:
Server Error in '/sqlservertest' Application.
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'JERRY-3C9615BAAASPNET'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684883
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1751
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +32
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1837
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +129
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1787
Version Information: Microsoft .NET Framework Version:2.0.50215.312; ASP.NET Version:2.0.50215.312
SQL Server 2005 Error When Trying To Connect To Sql Server 2000 Database
Apr 3, 2007Hi all.I am working on asp.net 2.0 with back end as sqlserver 2000. but when trying to connect to the database i am getting the following error displayed An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: An error has occurred while establishing
a connection to the server. When connecting to SQL Server 2005, this failure
may be caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not
open a connection to SQL Server)Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +1093 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +1083 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +272 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +351 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +82 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +558 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +126 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +651 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +160 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +122 System.Data.SqlClient.SqlConnection.Open() +229 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +114 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +225 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +157 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +68 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +100 System.Web.UI.WebControls.Login.AuthenticateUsingMembershipProvider(AuthenticateEventArgs e) +100 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +113 System.Web.UI.WebControls.Login.AttemptLogin() +178 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +134 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +107 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +178 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3837
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42 can anyone help??????????? regardspravallika
Help - Security Event Log Posts Error Event ID 560 Every Few Seconds
May 31, 2007Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
The AcquireConnection Method Call To The Connection Manager Server.Northwind Failed With Error Code 0xC0202009;
Aug 20, 2007Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
Northwind Database In SQL Server Express Is Busted And Gone,after SqlCommand Fails In VB2005Express-How To Prevent It Happen?
Aug 21, 2007Hi all,
I tried to use dbo.tables of Northwind database in SQL Server Express to do SqlCommand to populate a DataTable in DataSet. The SqlCommand failed in the project execution and I found that Northwind database in SQL Server Express is busted and gone (just the name "Northwind" remained in the SQL Server Management Studio Express). How can I prevent it from happening in my "SqlCommand-SqlConnection" project? Please help and advise.
I tried to repair my "Northwind" database by using the SQL2000SampleDb.msi of Northwind and pubs Sample Databases for SQL Server 2000 downloaded from the http://www.microsoft.com/downloads. My "pubs" database is still in my SQL Server Management Studio Express. How can I just repair my "Northwind" database by using the Microsoft SQL2000SampleDb.msi program? Please help and advise this matter too.
Thanks in advance,
Scott Chang
How Can I Re-install The Northwind Database In SQL Server Management Studio Express?Use SqlDataSet && The .Fill Method Properly?
Apr 30, 2007Hi all,
In my VB 2005 Express, I created a Windowds Form application "shcDataSet" that used 1 SqlConnection, 1 SqlDataSet and 3 SqlDataAdapters associated with the Northwind Database in my SQL Server Management Studio Express. The SqlConnection had "User Instance" in the following ConnectionString: Data Source=.SQLEXPRESS;AttachDbFilename="C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataorthwnd.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True. The 3 SqlDataAdapters were for the Northwind files "Customers", "Orders" and "Order Details" used in the SQLDataSet "AllOrders" with a AllOrders.xsd file. I ran the "shcDataSet" applicatyion and it worked fine. After the execution of "shcDataSet", I checked the Northwind database in my SQL Server Management Studio Express and clicked on "+" in front of Northwind database-I did not see any file showed up and I got the following error message: Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum) Additional information: one or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup. (Microsoft SQL Server, Error:5173). If I executed the "shcDataSet" application again, I got a new error: SqlException was unhandled - Cannot open user default database. Login failed. Login failed for user 'myPC##myName' ------->daCustomers.Fill(AllOrders11, "Customers"). I have 3 questions to ask: (1) How can I re-install the Northwind database in SQL Server Management Studio Express? (2) When I use the .Fill Method, do I have to tell the SQL Server Management Studio Express to load and/or unload the Northwind files "Customers", "Orders" and "Order Details"? (3) After I executed the "shcDataSet", should I Upload the 3 Northwind files back to the SQL Server Management Studio Express? Please help and advise. Thanks, Scott Chang
Receiving Error 'SQL Server Everywhere Encountered Problems When Opening The Database' Trying To Connect To Mobile Sdf.
May 13, 2008Using the following code we are having a problem connecting a clients WIndows Mobile device to the SDF under IIS. We have success elsewhere. Does anyone have any clues ?
Cheers Al
Dim repl As New SqlCeReplication()
Try
repl.InternetUrl = InternetUrl
repl.Publisher = Repl_Publisher
repl.PublisherDatabase = Repl_PublisherDatabase
repl.PublisherSecurityMode = SecurityType.DBAuthentication
repl.Publication = Repl_Publication
repl.Subscriber = Repl_Subscriber
repl.SubscriberConnectionString = Repl_SubscriberConnectionString
repl.DistributorLogin = Handhelds_User
repl.DistributorPassword = Handhelds_Password
repl.AddSubscription(AddOption.ExistingDatabase)
repl.Synchronize()
MsgBox("Synched!")
Catch err As SqlCeException
MessageBox.Show(err.ToString, "Error")
Finally
Cursor.Current = System.Windows.Forms.Cursors.WaitCursor
End Try
Sql 3.5 Event Log File Full Help Please
Apr 30, 2008event log file is full
i am new to visual studio 2008, but comprehend pretty well. (i use to steal code from .bas files and whatnot in 5th grade in vb4 for aol ''progz'') anyway, all i wanna do is create a simple single form window as my first project with vs 2008. i have a huge list of movies, and i would like a form to help me list what titles i have, and their location (friends house, cd book 1, book 2, movie tower, etc.) and i would like to be able to add to the list, delete, edit location, from my form. right now i got as far as designing my interface, and started to add a database. i cant even get pass that because..
i goto add item from my menu bar..
add item..
local database..
then the configuration wizard comes up and says an error occured while retrieving the information from the database:
the even log file is full.
help???
SQL Server 2014 :: Retrieving All Error Messages Generated By A Command
Jul 17, 2014Some T-SQL commands can fail with multiple errors. For example, if you try to disable a primary key constraint using ALTER TABLE t1 NOCHECK CONSTRAINT PK, you will get messages like:
Msg 11415, Level 16, State 1, Line 341
Object 'PK' cannot be disabled or enabled. This action applies only to foreign key and check constraints.
Msg 4916, Level 16, State 0, Line 341
Could not enable or disable the constraint. See previous errors.
However, in the code below, only the last message is printed. How can I print all the error messages?
USE tempdb;
CREATE TABLE #t1(c1 INT CONSTRAINT PK PRIMARY KEY);
BEGIN TRY
ALTER TABLE #t1 NOCHECK CONSTRAINT PK;
PRINT 'Primary key disabled'
END TRY
BEGIN CATCH
PRINT ERROR_MESSAGE();
END CATCH
Error Message: Cannot Open Database.[DBNETLIB][ConnectionOpen(Connect()).] SQL Server Does Not Exist Or Access Denied.
Mar 20, 2008I installed SQL 2005 including backward compatibility, MSDN libraries and SP2 a new Windows 2003 server (chose mixed mode authentication). Installation was successful and I then installed an off the shelf database with Windows authentication which also installed successfully.
I created a new group in AD, added the database users into the group and gave db-owner rights to the group in SQL as advised by the installation guide. However, when I try to open the database it gives an error message saying "Cannot open database.[DBNETLIB][ConnectionOpen(Connect()).] SQL server does not exist or access denied". I also tested it adding an individual user (myself) as a user to no avail.
When I set up DSN in ODBC on my computer I can successfully test the connection but can't run the application. The connection is via TCP/IP.
Any suggestions?
SQL Server Compact Database..
Jan 4, 2008Hi,
I am new to SQL Mobile developement and trying to developing a small device appliction. My C# code is shown below. My code is executing correctly, but i am not able to see the inserted records in to my SQL Compact database. What i am doing here? Please help.
FYI, I have added the database in to my solution. My solution and database resides in E:\some directory, where as the my assembly code base represents the datasource as \ProgramFilesMobExpTrackerMobExpTracker.sdf.
SqlCeConnection connection
{
get
{
if (_connection == null)
{
_connection = new SqlCeConnection(ConnectionString);
_connection.Open();
}
return _connection;
}
}
string CurrentFolder
{
get {return Path.GetDirectoryName(Assembly.GetExecutingAssembly().GetName().CodeBase);
}
}
const string databaseLocalFileName = "Northwind.sdf";
string DatabasePathName
{
get { return Path.Combine(CurrentFolder, databaseLocalFileName); }
}
const string BaseConnectionString = "Data Source=";
string ConnectionString
{
get { return BaseConnectionString + DatabasePathName; }
}
const string sql =
"INSERT INTO mobexptracker(ExpenseDt,ExpenseDescr,ExpenseAmt) VALUES (@ExpenseDt,@ExpenseDescr,@ExpenseAmt)";
const string sql1 =
"SELECT COUNT(1) FROM mobexptracker";
private void btnSave_Click(object sender, EventArgs e)
{
bool savesucess = Save();
if (savesucess)
{
MessageBox.Show("Expense Saved Sucessfully!");
}
else
{
MessageBox.Show("Error!");
}
}
bool Save ()
{
bool success= false;
using (SqlCeCommand cmd = new SqlCeCommand(sql,connection))
{
cmd.Parameters.Add("@ExpenseDt", txtDate.Text);
cmd.Parameters.Add("@ExpenseDescr",txtExpDesc.Text);
cmd.Parameters.Add("@ExpenseAmt",txtExpAmount.Text );
int cnt = (int)cmd.ExecuteNonQuery(); // ExecuteScalar();
cmd.
success = cnt > 0;
}
return success;
}
Zero Out SQL Server Compact 3.5 Database
Feb 22, 2008
I have an application that uses a SQL Server Compact 3.5 database backend. Everytime the application starts I want to zero out my database, meaning remove all records and reseed all identities. This datatbase is then filled based on a directory structure. Once this DB is filled I then send the entire database to a Windows Mobile PPC device via 802.11g WIFI. Before sending the database I first create an MD5 checksum on both the server and client sides to see if the database actually needs to be transfered. If the checksums match I will not send it as the client already has the lastest copy.
My problem is that I can never count on the database identity values starting at the same number on any particular instance of the application so the checksums are usually different. To solve this problem I need to ensure that everytime I start my server application the database (and all identifiers) will always be the same, will always be as if I just creaed it. How do I do this?!?!?!? This seems like it would be a trivial operation as I can imagine its use in multiple situations. Anyone know how to zero out the database?
SQL Server Error Message In Event Log
Mar 28, 2001Event Id: 8, Source: SQLCTR60
Type: error, Catagory: None,
DB-Library error - unexpected EOF from SQL server. Conection broken.
Calling Stored Procedures From ADO.NET-VB 2005 Express:1)Compile Errors && Warnings,2)Northwind Database In Database Explorer?
Feb 13, 2008Hi all,
I try to learn "How to Access Stored Procedures with ADO.NET 2.0 - VB 2005 Express: (1) Handling the Input and Output Parameters and (2) Reporting their Values in VB Forms". I found a good article "Calling Stored Procedures from ADO.NET" by John Paul Cook in http://www.dbzine.com/sql/sql-artices/cook6. I downloaded the source code into my VB 2005 Express:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Cook
Inherits System.Windows.Form.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeComponent()
'Add any initialization after the InitializeComponent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
Friend WithEvents GroupBox1 As System.Windows.Forms.GroupBox
Friend WithEvents labelPAF As System.Windows.Forms.Label
Friend WithEvents labelNbrPrices As System.Windows.Forms.Label
Friend WithEvents UpdatePrices As System.Windows.Forms.Button
Friend WithEvents textBoxPAF As System.Windows.Forms.TextBox
Friend WithEvents TenMostExpensive As System.Windows.Forms.Button
Friend WithEvents grdNorthwind As System.Windows.Forms.DataGrid
Friend WithEvents groupBox2 As System.Windows.Forms.GroupBox
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.GroupBox1 = New System.Windows.Forms.GroupBox()
Me.labelPAF = New System.Windows.Forms.Label()
Me.labelNbrPrices = New System.Windows.Forms.Label()
Me.textBoxPAF = New System.Windows.Forms.TextBox()
Me.UpdatePrices = New System.Windows.Forms.Button()
Me.groupBox2 = New System.Windows.Forms.GroupBox()
Me.TenMostExpensive = New System.Windows.Forms.Button()
Me.grdNorthwind = New System.Windows.Forms.DataGrid()
Me.GroupBox1.SuspendLayout()
Me.groupBox2.SuspendLayout()
CType(Me.grdNorthwind, System.ComponentModel.ISupportInitialize).BeginInit()
Me.SuspendLayout()
'
'GroupBox1
'
Me.GroupBox1.Controls.AddRange(New System.Windows.Forms.Control() {Me.labelPAF, Me.labelNbrPrices, Me.textBoxPAF, Me.UpdatePrices})
Me.GroupBox1.Location = New System.Drawing.Point(8, 8)
Me.GroupBox1.Name = "GroupBox1"
Me.GroupBox1.Size = New System.Drawing.Size(240, 112)
Me.GroupBox1.TabIndex = 9
Me.GroupBox1.TabStop = False
'
'labelPAF
'
Me.labelPAF.Location = New System.Drawing.Point(8, 16)
Me.labelPAF.Name = "labelPAF"
Me.labelPAF.Size = New System.Drawing.Size(112, 32)
Me.labelPAF.TabIndex = 2
Me.labelPAF.Text = "Enter Price Adjustment Factor"
'
'labelNbrPrices
'
Me.labelNbrPrices.Location = New System.Drawing.Point(8, 80)
Me.labelNbrPrices.Name = "labelNbrPrices"
Me.labelNbrPrices.Size = New System.Drawing.Size(216, 16)
Me.labelNbrPrices.TabIndex = 5
'
'textBoxPAF
'
Me.textBoxPAF.Location = New System.Drawing.Point(120, 16)
Me.textBoxPAF.Name = "textBoxPAF"
Me.textBoxPAF.TabIndex = 0
Me.textBoxPAF.Text = ""
'
'UpdatePrices
'
Me.UpdatePrices.Location = New System.Drawing.Point(8, 48)
Me.UpdatePrices.Name = "UpdatePrices"
Me.UpdatePrices.Size = New System.Drawing.Size(88, 23)
Me.UpdatePrices.TabIndex = 6
Me.UpdatePrices.Text = "Update Prices"
'
'groupBox2
'
Me.groupBox2.Controls.AddRange(New System.Windows.Forms.Control() {Me.TenMostExpensive, Me.grdNorthwind})
<Part 1----To be continued due to the length of this post>
User-defined Stored Procedures InsertCustomerin Northwind Database That Is Cached In Database Explorer:No New Values Inserted?
Jan 14, 2008Hi all,
I put "Northwind" Database in the Database Explorer of my VB 2005 Express and I have created the following stored procedure in the Database Exploror:
--User-defined stored procedure 'InsertCustomer'--
ALTER PROCEDURE dbo.InsertCustomer
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
INSERT INTO Customers
(
CustomerID,
CompanyName,
ContactName,
ContactTitle,
Address,
City,
Region,
PostalCode,
Country,
Phone,
Fax
)
VALUES
(
@CustomerID,
@CompanyName,
@ContactName,
@ContactTitle,
@Address,
@City,
@Region,
@PostalCode,
@Country,
@Phone,
@Fax
)
=================================================
In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code:
--Form_Kimmel.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=northwind;Data Source=NAB-WK-EN12345"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("InsertCustomer", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@CustomerID", "PAULK")
command.Parameters.Add("@CompanyName", "Pauly's Bar")
command.Parameters.Add("@ContactName", "Paul Kimmel")
command.Parameters.Add("@ContactTitle", "The Fat Man")
command.Parameters.Add("@Address", "31025 La Jolla")
command.Parameters.Add("@City", "Inglewoog")
command.Parameters.Add("@Region", "CA")
command.Parameters.Add("@Counrty", "USA")
command.Parameters.Add("@PostalCode", "90425")
command.Parameters.Add("@Phone", "(415) 555-1234")
command.Parameters.Add("@Fax", "(415 555-1235")
Console.WriteLine("Row inserted: " + _
command.ExecuteNonQuery().ToString)
Catch ex As Exception
Console.WriteLine(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
End Class
==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
Thanks in advance,
Scott Chang