I have a stored procedure that return either 1 or -1 :
IF EXISTS( )
BEGIN return 1 END
ELSE
BEGIN return -1 END
And then I try to retrieve the returned value by doing this:
int value = Convert.ToInt32(command.ExecuteScalar());
But the value I get is always 0. Anyone see what is wrong?
Hi,
I use a strong-typed DataSet to build the data access tier of my application, and the IDE generates most of code for me. However I can't find a way to get the value returned by a stored procedure(The stored procedure seems like 'RETURN 0').I noticed that a @RETURN_VALUE parameter is added automatically for each query method, but I don't know how to read the value.
Anybody could help me with the problem? Thanks.
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
I have an asp.net 1.1 website that uses sql server 2000 and vb.I have a bit of a dilema, when I run a stored procedure in a webpage it returns the wrong value, but if I run itin the query analyzer the correct value is returned. Dim orderHistory As nlb.OrdersDB = New nlb.OrdersDB
' Obtain Order ID from QueryString
Dim OrderID As Integer = CInt(Request.Params("ID"))
' Get the customer ID too
Dim myNewCustomerId As Integer = 0
myNewCustomerId = orderHistory.GetOrderCustomer(OrderID)
Public Function GetOrderCustomer(ByVal orderID As Integer) As Integer
' Create Instance of Connection and Command Object
Dim myConnection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim myCommand As SqlCommand = New SqlCommand("nlbsp_OrdersCustomerID", myConnection)
' Mark the Command as a SPROC
myCommand.CommandType = CommandType.StoredProcedure
' Add Parameters to SPROC
Dim parameterOrderID As New SqlParameter("@order_id", SqlDbType.Int, 4)
parameterOrderID.Value = orderID
myCommand.Parameters.Add(parameterOrderID)
Dim parameterOrderCustID As New SqlParameter("@customer_id", SqlDbType.Int, 4)
parameterOrderCustID.Value = ParameterDirection.Output
myCommand.Parameters.Add(parameterOrderCustID)
'Open the connection and execute the Command
myConnection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
' Return the customer_id (obtained as out paramter of SPROC)
If parameterOrderCustID.Value <> 0 Then
Return CInt(parameterOrderCustID.Value)
Else
Return 0
End If
End Function
the stored procdure is
CREATE PROCEDURE [dbo].[nlbsp_OrdersCustomerID]
(
@order_id int,
@customer_id int OUTPUT
)
AS
/* Return the customer_id from the Orders. */
SELECT
@customer_id = customer_id
FROM
nlb_Orders
WHERE
order_id = @order_id
GO
I know a particular order_id returns a value of 1. But when I run it in the webpage it always comes back as 2. Any ideas would be appreciated ThanksPete
The following query only brings back too much data in the table - there are duplicates and the lab it shows is wrong.
The problem is:
AND a.calLab = f.ID
in the Where statement.
Some equipment does not need calibration, so, a.calDueDate = 0 AND a.calLab would be NULL or 0.
tblLabs ID field has 1 - 18 (Labs) - no 0 and of course no null
I need to get the rest of the data.
Any suggestions?
Thanks.....
Zath
SELECT a.assignedID,
b.Manufacturer,
a.modelNumber,
a.serialNumber,
e.equipmentType,
a.Description,
c.Location,
d.Status,
a.modifiedDate,
a.modifiedBy,
a.Notes,
a.Picture,
f.LabName,
a.calibrationRequired,
a.calDate,
a.CalDueDate,
a.assetNumber,
a.ID
FROM tblEquipments a,
tblManufacturers b,
tblLocation c,
tblStatus d,
tblEquipment_Type e,
tblLabs f
WHERE a.manufacturer = b.manufacturerID
AND a.location = c.locationID
AND a.Status = d.statusID
AND a.EquipmentType = e.ID
AND (a.calLab = f.ID or a.calLab Is NULL or a.calLab = 0)
ORDER BY a.ID
I have a stored procedure that selects * from my table, and it seems to be working fine:
USE myDB
GO
IF OBJECT_ID ( 'dbo.GetAll', 'P') IS NOT NULL
DROP PROCEDURE GetAll
GO
CREATE PROCEDURE GetAll
AS
DECLARE ref_cur Cursor
FOR
SELECT * FROM myTable
Open ref_cur
FETCH NEXT FROM ref_cur
DEALLOCATE ref_cur
The problem is, I'm trying to create a DB class, and I'm not sure what Parameter settings I'm supposed to use for my returned values. Can anyone help me finish this?public class dbGet_base
{
public dbGet_base()
{
_requestId = 0;
}
public dbGet_base(Int64 RequestId)
{
this._requestId = RequestId;
getDbValues(RequestId);
}
public void getDbValues(Int64 RequestId)
{
getDbValues(RequestId, "GetAll");
}
public void getDbValues(Int64 RequestId, string SP_Name)
{
using(SqlConnection Conn = new SqlConnection(ConfigurationManager.AppSettings["WSConnection"]))
using (SqlCommand Command = new SqlCommand(SP_Name, Conn))
{
Command.CommandType = CommandType.StoredProcedure;
Command.Parameters.Add("@Request_Id", SqlDbType.Int).Value = RequestId;
Command.Parameters.Add(??
}
}
Hello,
I have the following stored prod in SQL server:
CREATE PROC spValidateUserIdAndPassword
@UserIdvarchar(50),
@Passwordvarchar(50)
AS
SELECT tblAdvertisers.UserID, tblAdvertisers.Password
FROM tblAdvertisers
WHERE ((tblAdvertisers.UserID = @UserId) AND (tblAdvertisers.Password = @Password))
I can run it in Query Analyzer and it returns one record as it should. I want it in ASP.NET to return the amount of rows that are effected, e.g that the login is correct.
The code I have is:
public bool ValidateUserIdAndPassword(string userId, string password)
{
sqlCommand.CommandType = CommandType.StoredProcedure;
//the name of the stored procedure
sqlCommand.CommandText = "spValidateUserIdAndPassword";
SqlParameter myParam;
//add the param's to the SP
//userId information for the user
myParam = new SqlParameter("@UserId", SqlDbType.VarChar, 50);
myParam.Value = CStr(userId);
sqlCommand.Parameters.Add(myParam);
//password information for the user
myParam = new SqlParameter("@Password", SqlDbType.VarChar, 50);
myParam.Value = CStr(password);
sqlCommand.Parameters.Add(myParam);
try
{
int rows = sqlCommand.ExecuteNonQuery();
if(rows == 1)
return true;
else
return false;
}
catch(System.Exception er)
{
//for design time error checking
return false;
}
This returns -1...
Please help me
Kind Regards
KitkatRobins :-)
I have the following stored procedure. The good thing is I finally got the syntax to the point where it doesn't blow up, but I was under the impression the "print" statement would print my result. In this case all I get is the statement ' 1 Row Affected ' which by the way is not the answer I was expecting.
Here's the code:
'
CREATE PROCEDURE createevents
AS
declare @myvariable varchar(700)
declare @myvar varchar(700)
begin
Select @myvariable = d.id
from table1 d, table2 dc where d.class = dc.class
If @myvariable > 0
begin
Select @myvar =dp. class
from table3 dp, table2 dc
where dp.class = dc.class
If @myvariable >= 1
begin
print @myvariable + (',') + @myvar
end
end
else
begin
print @myvariable + ('is empty')
end
end
'
Thanks in advance for any help.
Pls give some samples
View 3 Replies View RelatedI am running a sproc we have developed and I am getting a -6 as a returned value.what that actually means.
View 7 Replies View RelatedI am using the following stored procedure to insert a value into the database. I am new to stored procedures so I need help. Basically this stored procedurewill only insert a value for "CustomerName" if it is not a duplicate value.
So I noticed in My C# when I call this stored procedure, a negative one "-1"is returned if the insert is not performed because of a duplicate value.
Is that correct? Should I be getting back a negative one "-1" ? You seeI thought that a Zero "0" would be returned if the insert was not performed.Not a negative one?
SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGO
CREATE PROCEDURE [dbo].[CustomerCreate]( @CustomerDescription nvarchar(100), @CustomerName nvarchar(100), @LastUpdateDate datetime, @LastUpdateUser nvarchar(32), @inserted_record smallint output)
AS
if exists (select 1 from Customer where CustomerName = @CustomerName) BEGIN
set @inserted_record = 0
END ELSE BEGIN INSERT INTO Customer ( CustomerDescription, CustomerName, Active, LastUpdateDate, LastUpdateUser ) VALUES ( @CustomerDescription, @CustomerName, @LastUpdateDate, @LastUpdateUser ) END
I am trying to use a stored procedure inside the scripter in a site server pipeline. Can anyone tell me how the scripter will read the the result which is a variable. The stored procedure is returning the right value when run in query analyzer but I don't know how to retrieve it inside the pipeline.
Thank you
JG
I have a recordset returned from a stored procedure executed in the form open event. Could this recordset append to the form's recordsource property in the form's open event in VB? if so, what's the syntax?
Private Sub Form_Open(Cancel As Integer)
dim ...
Set add_bag_results = Nothing
With add_bag_results
.ActiveConnection = CurrentProject.Connection
.CommandType = adCmdStoredProc
.CommandText = "spSampling_add_bag_results"
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
'.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, rs_add_bag_results(1))
.Parameters.Append .CreateParameter("@lotnum", adInteger, adParamInput, 4, lot_n)
..
Set rs_add_bag_results = .Execute
End With
Me.RecordSource = rs_add_bag_results ?
Thanks!
I need some help retrieving the stored procedure listed below. I would like to use a drop list to select the variable "UserName" and textboxes to send the variables "StartingDate" and "EndingDate". How do I pass these variables and then have the results show up in a gridview? Any advice would be greatly appreciated. CREATE PROCEDURE [dbo].[aspnet_starterkits_GetTimeEntryUserReportByUserNameAndDates] @UserName NVARCHAR(256), @StartingDate datetime, @EndDate datetimeASDECLARE @UserId AS UNIQUEIDENTIFIERSET NOCOUNT ONSELECT @UserId=UserId FROM aspnet_users WHERE UserName=@UserNameSELECT @UserName as UserName, SUM (timeentryDuration) AS TotalDuration,SUM (timeentryOvertime) AS TotalOvertimeHoursFROM aspnet_starterkits_TimeEntryWHERE aspnet_starterkits_TimeEntry.TimeEntryUserId=@UserId AND TimeEntryDate between @StartingDate and @EndDate
View 1 Replies View RelatedI have 1 files, one is .sql and another is stored procedure. SQL file will call the stored procedure by passing the variables setup in the SQL file. However, everything ran well except at the end, I try to get the return value from SP to my SQL file ... which will send notification email. But, I get the following msg ... I am not sure how to fix this ... help!!! :(
Syntax error converting the varchar value 'ABC' to a column of data type int.
SQL file
======================
DECLARE @S AS VARCHAR(1000)
EXEC @S = PDT.DBO.SP_RPT 'ABC'
SELECT CONTENT = @S -- this is the value I am trying to pass as content of the email
EXEC PRODUCTION.DBO.SENDEMAIL 'xxx@hotmail.com', 'Notification', @S
======================
Stored Procedure
======================
CREATE procedure sp_RPT( @array varchar(1000) ) AS
DECLARE @content AS VARCHAR(2000)
SET @content = 'RPT: ' + @array + ' loaded successfully '
SET @array = 'ABC'RETURN CONVERT(VARCHAR(1000),@array)
GO
Stored Procedure ProblemThis is probably a simple problem but i would appreciate some help.I have a stored procedure that takes the order date time plus other information fromvarious tables but the information is being returned double:ie 4 rows are being returned instead of two. Can anyone see where i am going wrong?Many thanksMartinThis is the stored procedureALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct OD.DateCreated, O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNThese are the results that are returnedDateCreated OrderID UserID OrderTotal Sent Delivered Paid CustomerName ----------------------- ----------- ------------------------------------ ---------------- ------ --------- ------ --------------- 18/10/2006 14:49:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 14:49:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 18/10/2006 15:05:00 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(4 row(s) returned)If I leave OD.DateCreated ie use ALTER PROCEDURE dbo.SP_RetrieveOrdersASSELECT distinct O.OrderID,O.UserID,O.OrderTotal,O.Sent,O.Delivered,O.Paid,C.CustomerNameFROM Orders As O,Customers As C,OrderDetails as ODWHERE O.UserID=C.UserID And O.OrderTotal >0 RETURNthen there is no problem. I get:41 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 500 <NULL> <NULL> <NULL> bill 42 7A2E2B9B-57FA-4329-B4BB-D7ED965AA183 590 <NULL> <NULL> <NULL> bill No rows affected.(2 row(s) returned)
View 2 Replies View RelatedHi,
I need to write a select query that will run all returned results through a separate stored procedure before returning them to me.
Something like....
SELECT TOP 10 userid,url,first name FROM USERS ORDER by NEWID()
......and run all the selected userids through a stored procedure like.....
CREATE PROCEDURE AddUserToLog (@UserID int ) AS INSERT INTO SelectedUsers (UserID,SelectedOn) VALUES (@UserID,getdate())
Can anyone help me to get these working togethsr in the same qurey?
Thanks
In my ASP page, when I select an option from the drop down list, it has to get the records from the database stored procedure. There are around 60,000 records to be fetched. It throws an exception when I select this option. I think the application times out due to the large number of records. Could some tell me how to limit the number of rows to be returned to avoid this problem. Thanks.
Query
SELECT @SQLTier1Select = 'SELECT * FROM dbo.UDV_Tier1Accounts WHERE CUSTOMER IN (SELECT CUSTOMERNUMBER FROM dbo.UDF_GetUsersCustomers(' + CAST(@UserID AS VARCHAR(4)) + '))' + @Criteria + ' AND (number IN (SELECT DISTINCT ph1.number FROM Collect2000.dbo.payhistory ph1 LEFT JOIN Collect2000.dbo.payhistory ph2 ON ph1.UID = ph2.ReverseOfUID WHERE (((ph1.batchtype = ''PU'') OR (ph1.batchtype = ''PC'')) AND ph2.ReverseOfUID IS NULL)) OR code IN (SELECT DISTINCT StatusID FROM tbl_APR_Statuses WHERE SearchCategoryPaidPaymentsT1 = 1))'
Greetings
I have a SQL Server stored procedure that performs several queries and therefore returns several "result sets" at any one time.
Wiring it up via ADO.NET I populate a DataSet with a number of items in the Tables collection - which is great - and I can give each item a name for identification purposes once the DataSet is populated.
But I'd like to know if there is some way I can set the names of each result set *within the text of the stored procedure*, i.e. before the DataSet gets populated.
Any help greatly appreciated.
Stuart
I have a novice question. How does one suppress result sets returned from a stored procedure?
I have created a procedure which makes use of multiple stored procedures . The purpose of this procedure (lets call it procA), is to count the rows returned from other procedures. The €śOther€? procedures will return rows having an unknown number of columns. I would like to limit any changes which may be needed to be made to the €śOther€? procs.
Once procA has collected all of the information (@@rowcount) from the inner procedures, then it will return a result set having several columns €“ mainly the subProcedure name and number of rows returned.
The purpose of procA is to query several subsystems and identify which ones need attention.
Cursor While Loop
exec @ProcName @ObjectName,@userID,@syncDate
set @recs = @@rowcount;
My c# program calls the sp as follows:
cmd = DataUtility.GetSQLCommand();
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "FetchAdminData";
cmd.Parameters.AddWithValue("@userID", userAlias);
cmd.Parameters.AddWithValue("@adminDate",userDate);
reader = cmd.ExecuteReader();
I do not wish to iterate over each resultSet when I am only interested in the last one. Any suggestions?
Hello Group
I am new to stored procedures and I have been fighting this for a while and I hope someone can help. In my sp it checks username and password and returns an integer value. I would like to retrieve some data from the same database about the user (the users first and last name and the password of the user). I can’t retrieve the data. Here is my code.
CREATE PROCEDURE stpMyAuthentication
(
@fldUsername varchar( 50 ),
@fldPassword Char( 25 )--,
--@fldFirstName char( 30 ) OUTPUT,
--@fldLastName char( 30 ) OUTPUT
)
As
DECLARE @actualPassword Char( 25 )
SELECT
@actualPassword = fldPassword
FROM
tbMembUsers
Where
fldUsername = @fldUsername
IF @actualPassword IS NOT NULL
IF @fldPassword = @actualPassword
RETURN 1
ELSE
RETURN -2
ELSE
RETURN -1
SELECT
fldFirstName,
fldLastName,
fldPassword
FROM
tbMembUsers
Where
fldUsername = @fldUsername
GO
############### login page ################
Sub Login_Click(ByVal s As Object, ByVal e As EventArgs)
If IsValid Then
If MyAuthentication(Trim(txtuserID.Text), Trim(txtpaswrd.Text)) > 0 Then
FormsAuthentication.RedirectFromLoginPage(Trim(txtuserID.Text), False)
End If
End If
End Sub
Function MyAuthentication(ByVal strUsername As String, ByVal strPassword As String) As Integer
Dim myConn As SqlConnection
Dim myCmd As SqlCommand
Dim myReturn As SqlParameter
Dim intResult As Integer
Dim sqlConn As String
Dim strFirstName, strLastName As String
sqlConn = ConfigurationSettings.AppSettings("sqlConnStr")
myConn = New SqlConnection(sqlConn)
myCmd = New SqlCommand("stpMyAuthentication", myConn)
myCmd.CommandType = CommandType.StoredProcedure
myReturn = myCmd.Parameters.Add("RETURN_VALUE", SqlDbType.Int)
myReturn.Direction = ParameterDirection.ReturnValue
myCmd.Parameters.Add(Trim("@fldUsername"), Trim(strUsername))
myCmd.Parameters.Add(Trim("@fldPassword"), Trim(strPassword))
myCmd.Parameters.Add("@fldFirstName", strFirstName)
myCmd.Parameters.Add("@fldLastName", strLastName)
myCmd.Parameters.Add("@fldPassword", strPassword)
myConn.Open()
myCmd.ExecuteNonQuery()
intResult = myCmd.Parameters("RETURN_VALUE").Value
myConn.Close()
'If strPassword = 55555555 Then
' Session("intDefaultPass") = 1
'End If
Session("strFullName") = strFirstName & " " & strLastName
Session("strPassword") = strPassword
If intResult < 0 Then
If intResult = -1 Then
lblMessage.Text = "Username Not Registered!<br><br>"
Else
lblMessage.Text = "Invalid Password!<br><br>"
End If
End If
Return intResult
End FunctionAt this time I am not getting any errors. How can I retrieve the data that I am after?
Michael
Hi, Can anyone please help me solve this problem.
My functions works well with this stored procedure:
CREATE PROCEDURE proc_curCourseID@studentID int ASSELECT * FROM StudentCourse WHERE mark IS NULL AND studentID = @studentID AND archived IS NULLGO
But when I applied the same function to the following stored procedure
CREATE PROCEDURE proc_memberDetails@memberID int ASSELECT * FROM member WHERE id = @memberIDGO
I received this message
Exception Details: System.Data.SqlClient.SqlException: Procedure or function proc_memberDetails has too many arguments specified.Source Error:
Line 33: SqlDataAdapter sqlDA = new SqlDataAdapter();
Line 34: sqlDA.SelectCommand = sqlComm;
Line 35: sqlDA.Fill(dataSet);
Line 36:
Line 37: return dataSet;
The function I am using is returning a DataSet as below:
public DataSet ExecuteStoredProcSelect (string sqlProcedure, ArrayList paramName, ArrayList paramValue)
{
DataSet dataSet = new DataSet();
SqlConnection sqlConnect = new SqlConnection(GetDBConnectionString());
SqlCommand sqlComm = new SqlCommand (sqlProcedure, sqlConnect);
sqlComm.CommandType = CommandType.StoredProcedure;
for (int n=0; n<paramName.Count; n++)
{
sqlComm.Parameters.Add(paramName[n].ToString(),Convert.ToInt32(paramValue[n]));
}
SqlDataAdapter sqlDA = new SqlDataAdapter();
sqlDA.SelectCommand = sqlComm;
sqlDA.Fill(dataSet);
return dataSet;
}
If this is not the correct way, is there any other way to write a function to return a dataset as the result of the stored procedure?
Thanks.
Hi to all!
Is there a system stored procedure that retrieve info or name about an object?
I must know if a database contains a specific table and i must know if there is a specific DTS.. before execute it..
someone could help me??
thx a lot!
Ale.
Sorry for my poor english!!
bye! =)
Hi,
I'm having problems retrieving the output parameter from my stored procedure, i'm getting the following error
An SqlParameter with ParameterName '@slideshowid' is not contained by this SqlParameterCollection code as follows:
int publicationId = (int) Session["PublicationId"];string title = txtTitle.Text;int categoryid = Convert.ToInt32(dlCategory.SelectedItem.Value);SqlConnection myConnection = new SqlConnection(ConfigurationSettings.AppSettings["ConnectionString"]);SqlCommand myCommand = new SqlCommand("sp_be_addSlideshow", myConnection);myCommand.CommandType = CommandType.StoredProcedure;myCommand.Parameters.Add(new SqlParameter("@publicationid", SqlDbType.Int));myCommand.Parameters["@publicationid"].Value = publicationId;myCommand.Parameters.Add(new SqlParameter("@title", SqlDbType.NVarChar));myCommand.Parameters["@title"].Value = title;myCommand.Parameters.Add(new SqlParameter("@categoryid", SqlDbType.Int));myCommand.Parameters["@categoryid"].Value = categoryid;myConnection.Open();myCommand.ExecuteNonQuery();string slideshowId = myCommand.Parameters["@slideshowid"].Value.ToString();myConnection.Close();
my stored procedure:
CREATE PROCEDURE sp_be_addSlideshow( @publicationid int, @title nvarchar(50), @categoryid int, @slideshowid int = NULL OUTPUT)AS
INSERT INTO Slideshow(publicationid,title,slideshowcategoryid,deleted)
VALUES (@publicationid,@title,@categoryid,0)
SELECT @slideshowid = SCOPE_IDENTITY()GO
Im a bit confused on my programming skills. I know how to add a user and password using the Membership.CreateUser class. ' Define database connection
Dim conn As New SqlConnection("Server=localhostSqlExpress;" & _ "Database=lnp;Integrated Security=True") ' Create command
Dim comm As New SqlCommand( _ "SELECT oldLogId, oldPassword FROM userDetails WHERE (oldLogId = N'chuck') OR (oldLogId = N'top_dawg')", conn) ' Open connection
conn.Open()
' Execute the command
Dim reader As SqlDataReader = comm.ExecuteReader()
' Do something with the data
While reader.Read()
Dim partPassword = reader.Item("oldPassword") ' Adds underscore character and first 3 letters of password for distinct USER ID
Dim newUserID = reader.Item("oldLogId") & "_" & partPassword.SubString(0, 3) ' Create User if Valid
Try
Membership.CreateUser(newUserID, partPassword)
Catch ex As MembershipCreateUserException
' Code that is executed when an exception is generated ' The exception's details are accessible through the ex object
usersLabel.Text &= "<p><strong>Exception: " & newUserID & "</strong><br />" & ex.ToString() & "<br /><strong>Message: </strong><br />" & ex.Message & "</p>" End Try End While usersLabel.Text &= "<p><strong>END OF RECORDS</strong></p>" ' Close the reader and the connection
reader.Close()
conn.Close() But now I want to do something in a Stored Procedure USE [lnp]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE [dbo].[sp_createPortingDetailsWithUsers]-- Add the parameters for the stored procedure here @passUserId NVarChar(50), @passPassword NVarChar(50)ASBEGIN-- SET NOCOUNT ON added to prevent extra result sets from-- interfering with SELECT statements.SET NOCOUNT ON;Membership.CreateUser(@passUserId, @passPassword)Select SCOPE_IDENTITY()ENDBut when I try to execute this in SQL SERVER MANAGEMENT STUDIO EXPRESS, I get an error near the line MEMBERSHIP.CREATEUSER(@passUserId,@passPassword)Msg 102, Level 15, State 1, Procedure sp_createPortingDetailsWithUsers, Line 11Incorrect syntax near 'Membership'. What I want to do is create a user with a UserID and Password that I am passing from a table and then retrieve the USERID (unique identifier) when I create the new user. Can anyone suggest or show a tutorial on what I am doing wrong? I appreciate any assistance in advance,Chuck
Hi,
I am trying to return the id of the newly added row after the insert
statement in my stored procedure. I was told to "RETURN
SCOPE_IDENTITY()", which i did. The problem is i do not know how to get
this value in asp.net?
I added this code below in my business layer. myDAL refers to an object
of my DAL layer. In my DAL layer, i have a addPara() method which will
help me dynamically add as many parameters. Someone please advise me on
what to do. Thanks
myDAL.addPara("@RETURN_VALUE", , SqlDbType.Int, , ParameterDirection.ReturnValue)
Stored Procedure:
CREATE PROCEDURE [ADDPROMOTION]
(
@PROMOTIONNAME VARCHAR (100),
@PROMOSTARTDATE DATETIME,
@PROMOENDDATE DATETIME,
@DISCOUNTRATE INT,
@PROMODESC VARCHAR(100)
)
As
-- INSERT the new record
INSERT INTO
MSTRPROM(PROMOTIONNAME, DISCOUNTRATE, PROMOSTARTDATE,
PROMOENDDATE, PROMODESC)
VALUES
(@PROMOTIONNAME, @DISCOUNTRATE, @PROMOSTARTDATE, @PROMOENDDATE, @PROMODESC)
-- Now return the InventoryID of the newly inserted record
RETURN SCOPE_IDENTITY()
GO
Hello! This is my scenario...
Development - Visual Studio 2005
Database - MS SQL 2005
I have written a stored procedure that has a output parameter whose type is NVARCHAR(MAX). Then I use C# to wrap this stored procedure in OLEDB way. That means the OleDbType for that parameter is VarWChar.
This works fine if the string size is less than 4000. If more than 4000, the remaining part will be chopped off. The situation gets worst if I replace VarWChar with LongVarWChar. There is no error nor warning at compiling time. But there is an exception at run time.
So... Does anyone here can help me out? Thanks in advance.
I have a stored procedure which returns a result set as follows:
(Headers)Total,WV1,WV2,WV3,WV4,WV5.....
(Example data) "Some total name",1,2,3,4,5.....
The WV1, WV2, WV3 column names will be different depending on parameters passed to the stored procedure. In other words, the column names or number of columns aren't fixed (apart from "Total").
What I would like to be able to do is to just force SSRS to use the column headers supplied by the stored procedure as the column names in the report.
Hi all,
I am using SQLHelper to run a Stored Procedure.
The Stored Procedure returns 3 variables:
ie:
SELECT @Hits = COUNT(DISTINCT StatID) FROM Stats
...etc...
The SP is currently called as below:
SqlParameter[] sqlParams = new SqlParameter[]
{
new SqlParameter("@FromDate", Request["FromDate"]),
new SqlParameter("@ToDate", Request["ToDate"]),
};
My question is this: How do I retrieve these variables?
I know I need to declare a new SqlParameter and change it's Direction to Output but I am unsure of the exact syntax required to do this.
Thanks in advance,
Pete
Hi Guys,
I have a sql procedure that returns the following result when I execute it in query builder:
CountE ProjStatus
6 In Progress
3 Complete
4 On Hold
The stored procedure is as follow:
SELECT COUNT(*) AS countE, ProjStatusFROM PROJ_ProjectsGROUP BY ProjStatus
This is the result I want but when I try to output the result on my asp.net page I get the following error:
DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.Source Error:
Line 271: </asp:TemplateColumn>
Line 272: <asp:TemplateColumn>
Line 273: <itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
Line 274: </asp:TemplateColumn>
Line 275: </columns>
My asp.net page is as follows:
<script runat="server">
Dim myCommandPS As New SqlCommand("PROJ_GetProjStatus")
' Mark the Command as a SPROC
myCommandPS.CommandType = CommandType.StoredProcedure
Dim num as integer
num = CInt(myCommand.ExecuteScalar)
'Set the datagrid's datasource to the DataSet and databind
Dim myAdapterPS As New SqlDataAdapter(myCommandPS)
Dim dsPS As New DataSet()
myAdapter.Fill(dsPS)
dgProjSumm.DataSource = dsPS
dgProjSumm.DataBind()
myConnection.Close()
</script>
<asp:datagrid id="dgProjSumm" runat="server"
BorderWidth="0"
Cellpadding="4"
Cellspacing="0"
Width="100%"
Font-Names="Verdana,Arial,Helvetica; font-size: xx-small"
Font-Size="xx-small"
AutoGenerateColumns="false">
<columns>
<asp:TemplateColumn HeaderText="Project Summary" HeaderStyle-Font-Bold="true" >
<itemtemplate> <%# BgColor(DataBinder.Eval(Container.DataItem, "ProjStatus" ))%> </itemtemplate>
</asp:TemplateColumn>
<asp:TemplateColumn>
<itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
</asp:TemplateColumn>
</columns>
</asp:DataGrid>
Please help if you can Im havin real trouble here.
Cheers
I'm writing VB 6.0 codes to retrieve data from SQL Server 7.0. if the sql code is embedded in VB, everything works fine. But when I tried to use stored procedure, one error called "invalid object name 'author'" occurs. author is a table in my database and obviously is in the database. what's wrong?
appreciate for any suggestion!
...mike
Hi All,
Does anyone have a Stored Procedure that works perfectly to retrieve all zipcodes within a specified zipcode and distance radius - a zipcode and radius is passed and the Store Procedure result shows all zipcodes that falls within that range.
Thanks in advance
Ade
Hi All,
In my application on click of Delete button, actually I am not deleting the record. I am just updating the flag. But before updating the record I just want to know the dependency of the record ie. if the record I am deleting(internally updating) exists any where in the dependent tables, it should warn the user with message that it is available in the child table, so it can not be deleted. I want to check the dependency dynamically. For that I have written the following procedure. But it is updating in both cases.
CREATE proc SProc_DeleteRecord
@TableName varchar(50),
@DeleteCondition nVarchar(200)
As
Begin
Begin Transaction
Declare @DelString nvarchar(4000)
set @DelString = 'Delete from ' + @TableName + ' where ' + @DeleteCondition
execute sp_executeSql @DelString
RollBack Transaction --because i donot want to delete the record in any case
If @@Error <> 0
Begin
select '1'
End
Else
Begin
Declare @SQLString nvarchar(4000)
set @SQLString = 'Update ' + @TableName + ' set DeletedFlag=1 where ' + @DeleteCondition
execute sp_executeSql @SQLString
select '0'
End
End
Thanks & Regards
Bijay